opal-rspec 0.6.2 → 0.7.0.rc.1

data/rspec-expectations/features/step_definitions/additional_cli_steps.rb

@@ -1,22 +0,0 @@
-# Useful for when the output is slightly different on different versions of ruby
-Then /^the output should contain "([^"]*)" or "([^"]*)"$/ do |string1, string2|
-  unless [string1, string2].any? { |s| all_output =~ regexp(s) }
-    fail %Q{Neither "#{string1}" or "#{string2}" were found in:\n#{all_output}}
-  end
-end
-
-Then /^the output should contain all of these:$/ do |table|
-  table.raw.flatten.each do |string|
-    assert_partial_output(string, all_output)
-  end
-end
-
-Then /^the example(?:s)? should(?: all)? pass$/ do
-  step %q{the output should contain "0 failures"}
-  step %q{the exit status should be 0}
-end
-
-Then /^the example should fail$/ do
-  step %q{the output should contain "1 failure"}
-  step %q{the exit status should not be 0}
-end

data/rspec-expectations/features/support/disallow_certain_apis.rb

@@ -1,34 +0,0 @@
-# This file is designed to prevent the use of certain APIs that
-# we don't want used from our cukes, since they function as documentation.
-
-if defined?(Cucumber)
-  require 'shellwords'
-  Before('~@allow-disallowed-api') do
-    set_env('SPEC_OPTS', "-r#{Shellwords.escape(__FILE__)}")
-  end
-else
-  module DisallowOneLinerShould
-    def should(*)
-      raise "one-liner should is not allowed"
-    end
-
-    def should_not(*)
-      raise "one-liner should_not is not allowed"
-    end
-  end
-
-  RSpec.configure do |rspec|
-    rspec.expose_dsl_globally = false
-
-    rspec.mock_with :rspec do |mocks|
-      mocks.syntax = :expect
-    end
-
-    rspec.expect_with :rspec do |expectations|
-      expectations.syntax = :expect
-    end
-
-    rspec.include DisallowOneLinerShould
-  end
-end
-

data/rspec-expectations/features/support/env.rb

@@ -1,21 +0,0 @@
-require 'aruba/cucumber'
-
-Before do
-  if RUBY_PLATFORM =~ /java/ || defined?(Rubinius)
-    @aruba_timeout_seconds = 60
-  else
-    @aruba_timeout_seconds = 10
-  end
-end
-
-Aruba.configure do |config|
-  config.before_cmd do |cmd|
-    set_env('JRUBY_OPTS', "-X-C #{ENV['JRUBY_OPTS']}") # disable JIT since these processes are so short lived
-  end
-end if RUBY_PLATFORM == 'java'
-
-Aruba.configure do |config|
-  config.before_cmd do |cmd|
-    set_env('RBXOPT', "-Xint=true #{ENV['RBXOPT']}") # disable JIT since these processes are so short lived
-  end
-end if defined?(Rubinius)

data/rspec-expectations/features/support/rubinius.rb

@@ -1,6 +0,0 @@
-# Required until https://github.com/rubinius/rubinius/issues/2430 is resolved
-ENV['RBXOPT'] = "#{ENV["RBXOPT"]} -Xcompiler.no_rbc"
-
-Around "@unsupported-on-rbx" do |scenario, block|
-  block.call unless defined?(Rubinius)
-end

data/rspec-expectations/lib/rspec/expectations.rb

@@ -1,68 +0,0 @@
-require 'rspec/support'
-RSpec::Support.require_rspec_support "caller_filter"
-RSpec::Support.require_rspec_support "warnings"
-
-require 'rspec/matchers'
-
-RSpec::Support.define_optimized_require_for_rspec(:expectations) { |f| require_relative(f) }
-
-%w[
-  expectation_target
-  configuration
-  fail_with
-  handler
-  version
-].each { |file| RSpec::Support.require_rspec_expectations(file) }
-
-module RSpec
-  # RSpec::Expectations provides a simple, readable API to express
-  # the expected outcomes in a code example. To express an expected
-  # outcome, wrap an object or block in `expect`, call `to` or `to_not`
-  # (aliased as `not_to`) and pass it a matcher object:
-  #
-  #     expect(order.total).to eq(Money.new(5.55, :USD))
-  #     expect(list).to include(user)
-  #     expect(message).not_to match(/foo/)
-  #     expect { do_something }.to raise_error
-  #
-  # The last form (the block form) is needed to match against ruby constructs
-  # that are not objects, but can only be observed when executing a block
-  # of code. This includes raising errors, throwing symbols, yielding,
-  # and changing values.
-  #
-  # When `expect(...).to` is invoked with a matcher, it turns around
-  # and calls `matcher.matches?(<object wrapped by expect>)`.  For example,
-  # in the expression:
-  #
-  #     expect(order.total).to eq(Money.new(5.55, :USD))
-  #
-  # ...`eq(Money.new(5.55, :USD))` returns a matcher object, and it results
-  # in the equivalent of `eq.matches?(order.total)`. If `matches?` returns
-  # `true`, the expectation is met and execution continues. If `false`, then
-  # the spec fails with the message returned by `eq.failure_message`.
-  #
-  # Given the expression:
-  #
-  #     expect(order.entries).not_to include(entry)
-  #
-  # ...the `not_to` method (also available as `to_not`) invokes the equivalent of
-  # `include.matches?(order.entries)`, but it interprets `false` as success, and
-  # `true` as a failure, using the message generated by
-  # `include.failure_message_when_negated`.
-  #
-  # rspec-expectations ships with a standard set of useful matchers, and writing
-  # your own matchers is quite simple.
-  #
-  # See [RSpec::Matchers](../RSpec/Matchers) for more information about the
-  # built-in matchers that ship with rspec-expectations, and how to write your
-  # own custom matchers.
-  module Expectations
-    # Exception raised when an expectation fails.
-    #
-    # @note We subclass Exception so that in a stub implementation if
-    # the user sets an expectation, it can't be caught in their
-    # code by a bare `rescue`.
-    # @api public
-    ExpectationNotMetError = Class.new(::Exception)
-  end
-end

data/rspec-expectations/lib/rspec/expectations/configuration.rb

@@ -1,147 +0,0 @@
-RSpec::Support.require_rspec_expectations "syntax"
-
-module RSpec
-  module Expectations
-    # Provides configuration options for rspec-expectations.
-    # If you are using rspec-core, you can access this via a
-    # block passed to `RSpec::Core::Configuration#expect_with`.
-    # Otherwise, you can access it via RSpec::Expectations.configuration.
-    #
-    # @example
-    #   RSpec.configure do |rspec|
-    #     rspec.expect_with :rspec do |c|
-    #       # c is the config object
-    #     end
-    #   end
-    #
-    #   # or
-    #
-    #   RSpec::Expectations.configuration
-    class Configuration
-      # Configures the supported syntax.
-      # @param [Array<Symbol>, Symbol] values the syntaxes to enable
-      # @example
-      #   RSpec.configure do |rspec|
-      #     rspec.expect_with :rspec do |c|
-      #       c.syntax = :should
-      #       # or
-      #       c.syntax = :expect
-      #       # or
-      #       c.syntax = [:should, :expect]
-      #     end
-      #   end
-      def syntax=(values)
-        if Array(values).include?(:expect)
-          Expectations::Syntax.enable_expect
-        else
-          Expectations::Syntax.disable_expect
-        end
-
-        if Array(values).include?(:should)
-          Expectations::Syntax.enable_should
-        else
-          Expectations::Syntax.disable_should
-        end
-      end
-
-      # The list of configured syntaxes.
-      # @return [Array<Symbol>] the list of configured syntaxes.
-      # @example
-      #   unless RSpec::Matchers.configuration.syntax.include?(:expect)
-      #     raise "this RSpec extension gem requires the rspec-expectations `:expect` syntax"
-      #   end
-      def syntax
-        syntaxes = []
-        syntaxes << :should if Expectations::Syntax.should_enabled?
-        syntaxes << :expect if Expectations::Syntax.expect_enabled?
-        syntaxes
-      end
-
-      if ::RSpec.respond_to?(:configuration)
-        def color?
-          ::RSpec.configuration.color_enabled?
-        end
-      else
-        # Indicates whether or not diffs should be colored.
-        # Delegates to rspec-core's color option if rspec-core
-        # is loaded; otherwise you can set it here.
-        attr_writer :color
-
-        # Indicates whether or not diffs should be colored.
-        # Delegates to rspec-core's color option if rspec-core
-        # is loaded; otherwise you can set it here.
-        def color?
-          @color
-        end
-      end
-
-      # Adds `should` and `should_not` to the given classes
-      # or modules. This can be used to ensure `should` works
-      # properly on things like proxy objects (particular
-      # `Delegator`-subclassed objects on 1.8).
-      #
-      # @param [Array<Module>] modules the list of classes or modules
-      #   to add `should` and `should_not` to.
-      def add_should_and_should_not_to(*modules)
-        modules.each do |mod|
-          Expectations::Syntax.enable_should(mod)
-        end
-      end
-
-      # Sets or gets the backtrace formatter. The backtrace formatter should
-      # implement `#format_backtrace(Array<String>)`. This is used
-      # to format backtraces of errors handled by the `raise_error`
-      # matcher.
-      #
-      # If you are using rspec-core, rspec-core's backtrace formatting
-      # will be used (including respecting the presence or absence of
-      # the `--backtrace` option).
-      #
-      # @!attribute [rw] backtrace_formatter
-      attr_writer :backtrace_formatter
-      def backtrace_formatter
-        @backtrace_formatter ||= if defined?(::RSpec.configuration.backtrace_formatter)
-                                   ::RSpec.configuration.backtrace_formatter
-                                 else
-                                   NullBacktraceFormatter
-                                 end
-      end
-
-      # Sets if custom matcher descriptions and failure messages
-      # should include clauses from methods defined using `chain`.
-      # @param value [Boolean]
-      attr_writer :include_chain_clauses_in_custom_matcher_descriptions
-
-      # Indicates whether or not custom matcher descriptions and failure messages
-      # should include clauses from methods defined using `chain`. It is
-      # false by default for backwards compatibility.
-      def include_chain_clauses_in_custom_matcher_descriptions?
-        @include_chain_clauses_in_custom_matcher_descriptions ||= false
-      end
-
-      # @private
-      def reset_syntaxes_to_default
-        self.syntax = [:should, :expect]
-        RSpec::Expectations::Syntax.warn_about_should!
-      end
-
-      # @api private
-      # Null implementation of a backtrace formatter used by default
-      # when rspec-core is not loaded. Does no filtering.
-      NullBacktraceFormatter = Module.new do
-        def self.format_backtrace(backtrace)
-          backtrace
-        end
-      end
-    end
-
-    # The configuration object.
-    # @return [RSpec::Expectations::Configuration] the configuration object
-    def self.configuration
-      @configuration ||= Configuration.new
-    end
-
-    # set default syntax
-    configuration.reset_syntaxes_to_default
-  end
-end

data/rspec-expectations/lib/rspec/expectations/expectation_target.rb

@@ -1,119 +0,0 @@
-module RSpec
-  module Expectations
-    # Wraps the target of an expectation.
-    #
-    # @example
-    #   expect(something)       # => ExpectationTarget wrapping something
-    #   expect { do_something } # => ExpectationTarget wrapping the block
-    #
-    #   # used with `to`
-    #   expect(actual).to eq(3)
-    #
-    #   # with `not_to`
-    #   expect(actual).not_to eq(3)
-    #
-    # @note `ExpectationTarget` is not intended to be instantiated
-    #   directly by users. Use `expect` instead.
-    class ExpectationTarget
-      # @private
-      # Used as a sentinel value to be able to tell when the user
-      # did not pass an argument. We can't use `nil` for that because
-      # `nil` is a valid value to pass.
-      UndefinedValue = Module.new
-
-      # @api private
-      def initialize(value)
-        @target = value
-      end
-
-      # @private
-      def self.for(value, block)
-        if UndefinedValue.equal?(value)
-          unless block
-            raise ArgumentError, "You must pass either an argument or a block to `expect`."
-          end
-          BlockExpectationTarget.new(block)
-        elsif block
-          raise ArgumentError, "You cannot pass both an argument and a block to `expect`."
-        else
-          new(value)
-        end
-      end
-
-      # Runs the given expectation, passing if `matcher` returns true.
-      # @example
-      #   expect(value).to eq(5)
-      #   expect { perform }.to raise_error
-      # @param [Matcher]
-      #   matcher
-      # @param [String or Proc] message optional message to display when the expectation fails
-      # @return [Boolean] true if the expectation succeeds (else raises)
-      # @see RSpec::Matchers
-      def to(matcher=nil, message=nil, &block)
-        prevent_operator_matchers(:to) unless matcher
-        RSpec::Expectations::PositiveExpectationHandler.handle_matcher(@target, matcher, message, &block)
-      end
-
-      # Runs the given expectation, passing if `matcher` returns false.
-      # @example
-      #   expect(value).not_to eq(5)
-      # @param [Matcher]
-      #   matcher
-      # @param [String or Proc] message optional message to display when the expectation fails
-      # @return [Boolean] false if the negative expectation succeeds (else raises)
-      # @see RSpec::Matchers
-      def not_to(matcher=nil, message=nil, &block)
-        prevent_operator_matchers(:not_to) unless matcher
-        RSpec::Expectations::NegativeExpectationHandler.handle_matcher(@target, matcher, message, &block)
-      end
-      alias to_not not_to
-
-    private
-
-      def prevent_operator_matchers(verb)
-        raise ArgumentError, "The expect syntax does not support operator matchers, " \
-                             "so you must pass a matcher to `##{verb}`."
-      end
-    end
-
-    # @private
-    # Validates the provided matcher to ensure it supports block
-    # expectations, in order to avoid user confusion when they
-    # use a block thinking the expectation will be on the return
-    # value of the block rather than the block itself.
-    class BlockExpectationTarget < ExpectationTarget
-      def to(matcher, message=nil, &block)
-        enforce_block_expectation(matcher)
-        super
-      end
-
-      def not_to(matcher, message=nil, &block)
-        enforce_block_expectation(matcher)
-        super
-      end
-      alias to_not not_to
-
-    private
-
-      def enforce_block_expectation(matcher)
-        return if supports_block_expectations?(matcher)
-
-        raise ExpectationNotMetError, "You must pass an argument rather than " \
-          "a block to use the provided matcher (#{description_of matcher}), or " \
-          "the matcher must implement `supports_block_expectations?`."
-      end
-
-      def supports_block_expectations?(matcher)
-        matcher.supports_block_expectations?
-      rescue NoMethodError
-        false
-      end
-
-      def description_of(matcher)
-        matcher.description
-      rescue NoMethodError
-        matcher.inspect
-      end
-    end
-  end
-end

data/rspec-expectations/lib/rspec/expectations/fail_with.rb

@@ -1,34 +0,0 @@
-RSpec::Support.require_rspec_support 'differ'
-
-module RSpec
-  module Expectations
-    class << self
-      # @private
-      def differ
-        RSpec::Support::Differ.new(
-          :object_preparer => lambda { |object| RSpec::Matchers::Composable.surface_descriptions_in(object) },
-          :color => RSpec::Matchers.configuration.color?
-        )
-      end
-
-      # Raises an RSpec::Expectations::ExpectationNotMetError with message.
-      # @param [String] message
-      # @param [Object] expected
-      # @param [Object] actual
-      #
-      # Adds a diff to the failure message when `expected` and `actual` are
-      # both present.
-      def fail_with(message, expected=nil, actual=nil)
-        unless message
-          raise ArgumentError, "Failure message is nil. Does your matcher define the " \
-                               "appropriate failure_message[_when_negated] method to return a string?"
-        end
-
-        diff = differ.diff(actual, expected)
-        message = "#{message}\nDiff:#{diff}" unless diff.empty?
-
-        raise RSpec::Expectations::ExpectationNotMetError, message
-      end
-    end
-  end
-end