opal-rspec 0.6.2 → 0.7.0.rc.1

data/rspec-core/lib/rspec/core/project_initializer.rb

@@ -1,48 +0,0 @@
-RSpec::Support.require_rspec_support "directory_maker"
-
-module RSpec
-  module Core
-    # @private
-    # Generates conventional files for an rspec project
-    class ProjectInitializer
-      attr_reader :destination, :stream, :template_path
-
-      DOT_RSPEC_FILE = '.rspec'
-      SPEC_HELPER_FILE =  'spec/spec_helper.rb'
-
-      def initialize(opts={})
-        @destination = opts.fetch(:destination, Dir.getwd)
-        @stream = opts.fetch(:report_stream, $stdout)
-        @template_path = opts.fetch(:template_path) do
-          File.expand_path("../project_initializer", __FILE__)
-        end
-      end
-
-      def run
-        copy_template DOT_RSPEC_FILE
-        copy_template SPEC_HELPER_FILE
-      end
-
-    private
-
-      def copy_template(file)
-        destination_file = File.join(destination, file)
-        return report_exists(file) if File.exist?(destination_file)
-
-        report_creating(file)
-        RSpec::Support::DirectoryMaker.mkdir_p(File.dirname(destination_file))
-        File.open(destination_file, 'w') do |f|
-          f.write File.read(File.join(template_path, file))
-        end
-      end
-
-      def report_exists(file)
-        stream.puts "   exist   #{file}"
-      end
-
-      def report_creating(file)
-        stream.puts "  create   #{file}"
-      end
-    end
-  end
-end

data/rspec-core/lib/rspec/core/project_initializer/spec/spec_helper.rb

@@ -1,89 +0,0 @@
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause this
-# file to always be loaded, without a need to explicitly require it in any files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need it.
-#
-# The `.rspec` file also contains a few flags that are not defaults but that
-# users commonly want.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    # be_bigger_than(2).and_smaller_than(4).description
-    #   # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #   # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # These two settings work together to allow you to limit a spec run
-  # to individual examples or groups you care about by tagging them with
-  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
-  # get run.
-  config.filter_run :focus
-  config.run_all_when_everything_filtered = true
-
-  # Limits the available syntax to the non-monkey patched syntax that is recommended.
-  # For more details, see:
-  #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
-  #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://myronmars.to/n/dev-blog/2014/05/notable-changes-in-rspec-3#new__config_option_to_disable_rspeccore_monkey_patching
-  config.disable_monkey_patching!
-
-  # This setting enables warnings. It's recommended, but in some cases may
-  # be too noisy due to issues in dependencies.
-  config.warnings = true
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = 'doc'
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end

data/rspec-core/lib/rspec/core/rake_task.rb

@@ -1,187 +0,0 @@
-require 'rake'
-require 'rake/tasklib'
-require 'rbconfig'
-
-module RSpec
-  module Core
-    # Rspec rake task
-    #
-    # @see Rakefile
-    class RakeTask < ::Rake::TaskLib
-      include ::Rake::DSL if defined?(::Rake::DSL)
-
-      # Default path to the rspec executable
-      DEFAULT_RSPEC_PATH = File.expand_path('../../../../exe/rspec', __FILE__)
-
-      # Default pattern for spec files.
-      DEFAULT_PATTERN = 'spec/**{,/*/**}/*_spec.rb'
-
-      # Name of task.
-      #
-      # default:
-      #   :spec
-      attr_accessor :name
-
-      # Files matching this pattern will be loaded.
-      #
-      # default:
-      #   'spec/**{,/*/**}/*_spec.rb'
-      attr_accessor :pattern
-
-      # Files matching this pattern will be excluded.
-      #
-      # default:
-      #   'spec/**/*_spec.rb'
-      attr_accessor :exclude_pattern
-
-      # Whether or not to fail Rake when an error occurs (typically when examples fail).
-      #
-      # default:
-      #   true
-      attr_accessor :fail_on_error
-
-      # A message to print to stderr when there are failures.
-      attr_accessor :failure_message
-
-      # Use verbose output. If this is set to true, the task will print the
-      # executed spec command to stdout.
-      #
-      # default:
-      #   true
-      attr_accessor :verbose
-
-      # Command line options to pass to ruby.
-      #
-      # default:
-      #   nil
-      attr_accessor :ruby_opts
-
-      # Path to rspec
-      #
-      # default:
-      #   'rspec'
-      attr_accessor :rspec_path
-
-      # Command line options to pass to rspec.
-      #
-      # default:
-      #   nil
-      attr_accessor :rspec_opts
-
-      def initialize(*args, &task_block)
-        @name          = args.shift || :spec
-        @ruby_opts     = nil
-        @rspec_opts    = nil
-        @verbose       = true
-        @fail_on_error = true
-        @rspec_path    = DEFAULT_RSPEC_PATH
-        @pattern       = DEFAULT_PATTERN
-
-        define(args, &task_block)
-      end
-
-      # @private
-      def run_task(verbose)
-        command = spec_command
-
-        begin
-          puts command if verbose
-          success = system(command)
-        rescue
-          puts failure_message if failure_message
-        end
-
-        return unless fail_on_error && !success
-
-        $stderr.puts "#{command} failed"
-        exit $?.exitstatus
-      end
-
-    private
-
-      # @private
-      def define(args, &task_block)
-        desc "Run RSpec code examples" unless ::Rake.application.last_comment
-
-        task name, *args do |_, task_args|
-          RakeFileUtils.__send__(:verbose, verbose) do
-            task_block.call(*[self, task_args].slice(0, task_block.arity)) if task_block
-            run_task verbose
-          end
-        end
-      end
-
-      def file_inclusion_specification
-        if ENV['SPEC']
-          FileList[ ENV['SPEC']].sort
-        elsif String === pattern && !File.exist?(pattern)
-          "--pattern #{escape pattern}"
-        else
-          # Before RSpec 3.1, we used `FileList` to get the list of matched files, and
-          # then pass that along to the `rspec` command. Starting with 3.1, we prefer to
-          # pass along the pattern as-is to the `rspec` command, for 3 reasons:
-          #
-          #   * It's *much* less verbose to pass one `--pattern` option than a long list of files.
-          #   * It ensures `task.pattern` and `--pattern` have the same behavior.
-          #   * It fixes a bug, where `task.pattern = pattern_that_matches_no_files` would run
-          #     *all* files because it would cause no pattern or file args to get passed to `rspec`,
-          #     which causes all files to get run.
-          #
-          # However, `FileList` is *far* more flexible than the `--pattern` option. Specifically, it
-          # supports individual files and directories, as well as arrays of files, directories and globs,
-          # as well as other `FileList` objects.
-          #
-          # For backwards compatibility, we have to fall back to using FileList if the user has passed
-          # a `pattern` option that will not work with `--pattern`.
-          #
-          # TODO: consider deprecating support for this and removing it in RSpec 4.
-          FileList[pattern].sort.map { |file| escape file }
-        end
-      end
-
-      # Manaully comparing because in 3.2 we have RSpec::Support::OS.windows?
-      # but in 3.1 we don't and requiring rspec/world would be weighty here.
-      if RbConfig::CONFIG['host_os'] =~ /cygwin|mswin|mingw|bccwin|wince|emx/
-        def escape(shell_command)
-          "'#{shell_command.gsub("'", "\'")}'"
-        end
-      else
-        require 'shellwords'
-
-        def escape(shell_command)
-          shell_command.shellescape
-        end
-      end
-
-      def file_exclusion_specification
-        " --exclude-pattern #{escape exclude_pattern}" if exclude_pattern
-      end
-
-      def spec_command
-        cmd_parts = []
-        cmd_parts << RUBY
-        cmd_parts << ruby_opts
-        cmd_parts << rspec_load_path
-        cmd_parts << rspec_path
-        cmd_parts << file_inclusion_specification
-        cmd_parts << file_exclusion_specification
-        cmd_parts << rspec_opts
-        cmd_parts.flatten.reject(&blank).join(" ")
-      end
-
-      def blank
-        lambda { |s| s.nil? || s == "" }
-      end
-
-      def rspec_load_path
-        @rspec_load_path ||= begin
-          core_and_support = $LOAD_PATH.grep(
-            /#{File::SEPARATOR}rspec-(core|support)[^#{File::SEPARATOR}]*#{File::SEPARATOR}lib/
-          ).uniq
-
-          "-I#{core_and_support.map { |file| escape file }.join(File::PATH_SEPARATOR)}"
-        end
-      end
-    end
-  end
-end

data/rspec-core/lib/rspec/core/reporter.rb

@@ -1,149 +0,0 @@
-module RSpec::Core
-  # A reporter will send notifications to listeners, usually formatters for the
-  # spec suite run.
-  class Reporter
-    def initialize(configuration)
-      @configuration = configuration
-      @listeners = Hash.new { |h, k| h[k] = Set.new }
-      @examples = []
-      @failed_examples = []
-      @pending_examples = []
-      @duration = @start = @load_time = nil
-    end
-
-    # @private
-    attr_reader :examples, :failed_examples, :pending_examples
-
-    # Registers a listener to a list of notifications. The reporter will send notification of
-    # events to all registered listeners
-    #
-    # @param listener [Object] An obect that wishes to be notified of reporter events
-    # @param notifications [Array] Array of symbols represents the events a listener wishes to subscribe too
-    def register_listener(listener, *notifications)
-      notifications.each do |notification|
-        @listeners[notification.to_sym] << listener
-      end
-      true
-    end
-
-    # @private
-    def registered_listeners(notification)
-      @listeners[notification].to_a
-    end
-
-    # @api
-    # @overload report(count, &block)
-    # @overload report(count, &block)
-    # @param expected_example_count [Integer] the number of examples being run
-    # @yield [Block] block yields itself for further reporting.
-    #
-    # Initializes the report run and yields itself for further reporting. The
-    # block is required, so that the reporter can manage cleaning up after the
-    # run.
-    #
-    # @example
-    #
-    #     reporter.report(group.examples.size) do |r|
-    #       example_groups.map {|g| g.run(r) }
-    #     end
-    #
-    def report(expected_example_count)
-      start(expected_example_count)
-      begin
-        yield self
-      ensure
-        finish
-      end
-    end
-
-    # @private
-    def start(expected_example_count, time=RSpec::Core::Time.now)
-      @start = time
-      @load_time = (@start - @configuration.start_time).to_f
-      notify :start, Notifications::StartNotification.new(expected_example_count, @load_time)
-    end
-
-    # @private
-    def message(message)
-      notify :message, Notifications::MessageNotification.new(message)
-    end
-
-    # @private
-    def example_group_started(group)
-      notify :example_group_started, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
-    end
-
-    # @private
-    def example_group_finished(group)
-      notify :example_group_finished, Notifications::GroupNotification.new(group) unless group.descendant_filtered_examples.empty?
-    end
-
-    # @private
-    def example_started(example)
-      @examples << example
-      notify :example_started, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_passed(example)
-      notify :example_passed, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_failed(example)
-      @failed_examples << example
-      notify :example_failed, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def example_pending(example)
-      @pending_examples << example
-      notify :example_pending, Notifications::ExampleNotification.for(example)
-    end
-
-    # @private
-    def deprecation(hash)
-      notify :deprecation, Notifications::DeprecationNotification.from_hash(hash)
-    end
-
-    # @private
-    def finish
-      stop
-      notify :start_dump,    Notifications::NullNotification
-      notify :dump_pending,  Notifications::ExamplesNotification.new(self)
-      notify :dump_failures, Notifications::ExamplesNotification.new(self)
-      notify :deprecation_summary, Notifications::NullNotification
-      notify :dump_summary, Notifications::SummaryNotification.new(@duration, @examples, @failed_examples, @pending_examples, @load_time)
-      unless mute_profile_output?
-        notify :dump_profile, Notifications::ProfileNotification.new(@duration, @examples, @configuration.profile_examples)
-      end
-      notify :seed, Notifications::SeedNotification.new(@configuration.seed, seed_used?)
-    ensure
-      notify :close, Notifications::NullNotification
-    end
-
-    # @private
-    def stop
-      @duration = (RSpec::Core::Time.now - @start).to_f if @start
-      notify :stop, Notifications::ExamplesNotification.new(self)
-    end
-
-    # @private
-    def notify(event, notification)
-      registered_listeners(event).each do |formatter|
-        formatter.__send__(event, notification)
-      end
-    end
-
-  private
-
-    def mute_profile_output?
-      # Don't print out profiled info if there are failures and `--fail-fast` is used, it just clutters the output
-      !@configuration.profile_examples? || (@configuration.fail_fast? && @failed_examples.size > 0)
-    end
-
-    def seed_used?
-      @configuration.seed && @configuration.seed_used?
-    end
-  end
-end