opal-rspec 0.6.2 → 0.7.0.rc.1

data/rspec-core/lib/rspec/core/formatters/base_formatter.rb

@@ -1,67 +0,0 @@
-RSpec::Support.require_rspec_core "formatters/helpers"
-require 'stringio'
-
-module RSpec
-  module Core
-    module Formatters
-      # RSpec's built-in formatters are all subclasses of RSpec::Core::Formatters::BaseTextFormatter.
-      #
-      # @see RSpec::Core::Formatters::BaseTextFormatter
-      # @see RSpec::Core::Reporter
-      # @see RSpec::Core::Formatters::Protocol
-      class BaseFormatter
-        # all formatters inheriting from this formatter will receive these notifications
-        Formatters.register self, :start, :example_group_started, :close
-        attr_accessor :example_group
-        attr_reader :output
-
-        # @api public
-        # @param output [IO] the formatter output
-        # @see RSpec::Core::Formatters::Protocol#initialize
-        def initialize(output)
-          @output = output || StringIO.new
-          @example_group = nil
-        end
-
-        # @api public
-        #
-        # @param notification [StartNotification]
-        # @see RSpec::Core::Formatters::Protocol#start
-        def start(notification)
-          start_sync_output
-          @example_count = notification.count
-        end
-
-        # @api public
-        #
-        # @param notification [GroupNotification] containing example_group subclass of `RSpec::Core::ExampleGroup`
-        # @see RSpec::Core::Formatters::Protocol#example_group_started
-        def example_group_started(notification)
-          @example_group = notification.group
-        end
-
-        # @api public
-        #
-        # @param notification [NullNotification]
-        # @see RSpec::Core::Formatters::Protocol#close
-        def close(_notification)
-          restore_sync_output
-        end
-
-      private
-
-        def start_sync_output
-          @old_sync, output.sync = output.sync, true if output_supports_sync
-        end
-
-        def restore_sync_output
-          output.sync = @old_sync if output_supports_sync && !output.closed?
-        end
-
-        def output_supports_sync
-          output.respond_to?(:sync=)
-        end
-      end
-    end
-  end
-end

data/rspec-core/lib/rspec/core/formatters/base_text_formatter.rb

@@ -1,76 +0,0 @@
-RSpec::Support.require_rspec_core "formatters/base_formatter"
-RSpec::Support.require_rspec_core "formatters/console_codes"
-
-module RSpec
-  module Core
-    module Formatters
-      # Base for all of RSpec's built-in formatters. See RSpec::Core::Formatters::BaseFormatter
-      # to learn more about all of the methods called by the reporter.
-      #
-      # @see RSpec::Core::Formatters::BaseFormatter
-      # @see RSpec::Core::Reporter
-      class BaseTextFormatter < BaseFormatter
-        Formatters.register self,
-                            :message, :dump_summary, :dump_failures, :dump_pending, :seed
-
-        # @method message
-        # @api public
-        #
-        # Used by the reporter to send messages to the output stream.
-        #
-        # @param notification [MessageNotification] containing message
-        def message(notification)
-          output.puts notification.message
-        end
-
-        # @method dump_failures
-        # @api public
-        #
-        # Dumps detailed information about each example failure.
-        #
-        # @param notification [NullNotification]
-        def dump_failures(notification)
-          return if notification.failure_notifications.empty?
-          output.puts notification.fully_formatted_failed_examples
-        end
-
-        # @method dump_summary
-        # @api public
-        #
-        # This method is invoked after the dumping of examples and failures. Each parameter
-        # is assigned to a corresponding attribute.
-        #
-        # @param summary [SummaryNotification] containing duration, example_count,
-        #                                      failure_count and pending_count
-        def dump_summary(summary)
-          output.puts summary.fully_formatted
-        end
-
-        # @private
-        def dump_pending(notification)
-          return if notification.pending_examples.empty?
-          output.puts notification.fully_formatted_pending_examples
-        end
-
-        # @private
-        def seed(notification)
-          return unless notification.seed_used?
-          output.puts notification.fully_formatted
-        end
-
-        # @api public
-        #
-        # Invoked at the very end, `close` allows the formatter to clean
-        # up resources, e.g. open streams, etc.
-        #
-        # @param notification [NullNotification]
-        def close(_notification)
-          return unless IO === output
-          return if output.closed? || output == $stdout
-
-          output.close
-        end
-      end
-    end
-  end
-end

data/rspec-core/lib/rspec/core/formatters/console_codes.rb

@@ -1,64 +0,0 @@
-module RSpec
-  module Core
-    module Formatters
-      # ConsoleCodes provides helpers for formatting console output
-      # with ANSI codes, e.g. color's and bold.
-      module ConsoleCodes
-        # @private
-        VT100_CODES =
-          {
-            :black   => 30,
-            :red     => 31,
-            :green   => 32,
-            :yellow  => 33,
-            :blue    => 34,
-            :magenta => 35,
-            :cyan    => 36,
-            :white   => 37,
-            :bold    => 1,
-          }
-        # @private
-        VT100_CODE_VALUES = VT100_CODES.invert
-
-        module_function
-
-        # Fetches the correct code for the supplied symbol, or checks
-        # that a code is valid. Defaults to white (37).
-        #
-        # @param code_or_symbol [Symbol, Fixnum] Symbol or code to check
-        # @return [Fixnum] a console code
-        def console_code_for(code_or_symbol)
-          if RSpec.configuration.respond_to?(:"#{code_or_symbol}_color")
-            console_code_for configuration_color(code_or_symbol)
-          elsif VT100_CODE_VALUES.key?(code_or_symbol)
-            code_or_symbol
-          else
-            VT100_CODES.fetch(code_or_symbol) do
-              console_code_for(:white)
-            end
-          end
-        end
-
-        # Wraps a piece of text in ANSI codes with the supplied code. Will
-        # only apply the control code if `RSpec.configuration.color_enabled?`
-        # returns true.
-        #
-        # @param text [String] the text to wrap
-        # @param code_or_symbol [Symbol, Fixnum] the desired control code
-        # @return [String] the wrapped text
-        def wrap(text, code_or_symbol)
-          if RSpec.configuration.color_enabled?
-            "\e[#{console_code_for(code_or_symbol)}m#{text}\e[0m"
-          else
-            text
-          end
-        end
-
-        # @private
-        def configuration_color(code)
-          RSpec.configuration.__send__(:"#{code}_color")
-        end
-      end
-    end
-  end
-end

data/rspec-core/lib/rspec/core/formatters/deprecation_formatter.rb

@@ -1,222 +0,0 @@
-RSpec::Support.require_rspec_core "formatters/helpers"
-require 'set'
-
-module RSpec
-  module Core
-    module Formatters
-      # @private
-      class DeprecationFormatter
-        Formatters.register self, :deprecation, :deprecation_summary
-
-        attr_reader :count, :deprecation_stream, :summary_stream
-
-        def initialize(deprecation_stream, summary_stream)
-          @deprecation_stream = deprecation_stream
-          @summary_stream = summary_stream
-          @seen_deprecations = Set.new
-          @count = 0
-        end
-        alias :output :deprecation_stream
-
-        def printer
-          @printer ||= case deprecation_stream
-                       when File
-                         ImmediatePrinter.new(FileStream.new(deprecation_stream), summary_stream, self)
-                       when RaiseErrorStream
-                         ImmediatePrinter.new(deprecation_stream, summary_stream, self)
-                       else
-                         DelayedPrinter.new(deprecation_stream, summary_stream, self)
-                       end
-        end
-
-        def deprecation(notification)
-          return if @seen_deprecations.include? notification
-
-          @count += 1
-          printer.print_deprecation_message notification
-          @seen_deprecations << notification
-        end
-
-        def deprecation_summary(_notification)
-          printer.deprecation_summary
-        end
-
-        def deprecation_message_for(data)
-          if data.message
-            SpecifiedDeprecationMessage.new(data)
-          else
-            GeneratedDeprecationMessage.new(data)
-          end
-        end
-
-        RAISE_ERROR_CONFIG_NOTICE = <<-EOS.gsub(/^\s+\|/, '')
-          |
-          |If you need more of the backtrace for any of these deprecations to
-          |identify where to make the necessary changes, you can configure
-          |`config.raise_errors_for_deprecations!`, and it will turn the
-          |deprecation warnings into errors, giving you the full backtrace.
-        EOS
-
-        DEPRECATION_STREAM_NOTICE = "Pass `--deprecation-out` or set " \
-          "`config.deprecation_stream` to a file for full output."
-
-        SpecifiedDeprecationMessage = Struct.new(:type) do
-          def initialize(data)
-            @message = data.message
-            super deprecation_type_for(data)
-          end
-
-          def to_s
-            output_formatted @message
-          end
-
-          def too_many_warnings_message
-            msg = "Too many similar deprecation messages reported, disregarding further reports. "
-            msg << DEPRECATION_STREAM_NOTICE
-            msg
-          end
-
-          private
-
-          def output_formatted(str)
-            return str unless str.lines.count > 1
-            separator = "#{'-' * 80}"
-            "#{separator}\n#{str.chomp}\n#{separator}"
-          end
-
-          def deprecation_type_for(data)
-            data.message.gsub(/(\w+\/)+\w+\.rb:\d+/, '')
-          end
-        end
-
-        GeneratedDeprecationMessage = Struct.new(:type) do
-          def initialize(data)
-            @data = data
-            super data.deprecated
-          end
-
-          def to_s
-            msg =  "#{@data.deprecated} is deprecated."
-            msg << " Use #{@data.replacement} instead." if @data.replacement
-            msg << " Called from #{@data.call_site}." if @data.call_site
-            msg
-          end
-
-          def too_many_warnings_message
-            msg = "Too many uses of deprecated '#{type}'. "
-            msg << DEPRECATION_STREAM_NOTICE
-            msg
-          end
-        end
-
-        # @private
-        class ImmediatePrinter
-          attr_reader :deprecation_stream, :summary_stream, :deprecation_formatter
-
-          def initialize(deprecation_stream, summary_stream, deprecation_formatter)
-            @deprecation_stream = deprecation_stream
-
-            @summary_stream = summary_stream
-            @deprecation_formatter = deprecation_formatter
-          end
-
-          def print_deprecation_message(data)
-            deprecation_message = deprecation_formatter.deprecation_message_for(data)
-            deprecation_stream.puts deprecation_message.to_s
-          end
-
-          def deprecation_summary
-            return if deprecation_formatter.count.zero?
-            deprecation_stream.summarize(summary_stream, deprecation_formatter.count)
-          end
-        end
-
-        # @private
-        class DelayedPrinter
-          TOO_MANY_USES_LIMIT = 4
-
-          attr_reader :deprecation_stream, :summary_stream, :deprecation_formatter
-
-          def initialize(deprecation_stream, summary_stream, deprecation_formatter)
-            @deprecation_stream = deprecation_stream
-            @summary_stream = summary_stream
-            @deprecation_formatter = deprecation_formatter
-            @seen_deprecations = Hash.new { 0 }
-            @deprecation_messages = Hash.new { |h, k| h[k] = [] }
-          end
-
-          def print_deprecation_message(data)
-            deprecation_message = deprecation_formatter.deprecation_message_for(data)
-            @seen_deprecations[deprecation_message] += 1
-
-            stash_deprecation_message(deprecation_message)
-          end
-
-          def stash_deprecation_message(deprecation_message)
-            if @seen_deprecations[deprecation_message] < TOO_MANY_USES_LIMIT
-              @deprecation_messages[deprecation_message] << deprecation_message.to_s
-            elsif @seen_deprecations[deprecation_message] == TOO_MANY_USES_LIMIT
-              @deprecation_messages[deprecation_message] << deprecation_message.too_many_warnings_message
-            end
-          end
-
-          def deprecation_summary
-            return unless @deprecation_messages.any?
-
-            print_deferred_deprecation_warnings
-            deprecation_stream.puts RAISE_ERROR_CONFIG_NOTICE
-
-            summary_stream.puts "\n#{Helpers.pluralize(deprecation_formatter.count, 'deprecation warning')} total"
-          end
-
-          def print_deferred_deprecation_warnings
-            deprecation_stream.puts "\nDeprecation Warnings:\n\n"
-            @deprecation_messages.keys.sort_by(&:type).each do |deprecation|
-              messages = @deprecation_messages[deprecation]
-              messages.each { |msg| deprecation_stream.puts msg }
-              deprecation_stream.puts
-            end
-          end
-        end
-
-        # @private
-        # Not really a stream, but is usable in place of one.
-        class RaiseErrorStream
-          def puts(message)
-            raise DeprecationError, message
-          end
-
-          def summarize(summary_stream, deprecation_count)
-            summary_stream.puts "\n#{Helpers.pluralize(deprecation_count, 'deprecation')} found."
-          end
-        end
-
-        # @private
-        # Wraps a File object and provides file-specific operations.
-        class FileStream
-          def initialize(file)
-            @file = file
-
-            # In one of my test suites, I got lots of duplicate output in the
-            # deprecation file (e.g. 200 of the same deprecation, even though
-            # the `puts` below was only called 6 times). Setting `sync = true`
-            # fixes this (but we really have no idea why!).
-            @file.sync = true
-          end
-
-          def puts(*args)
-            @file.puts(*args)
-          end
-
-          def summarize(summary_stream, deprecation_count)
-            summary_stream.puts "\n#{Helpers.pluralize(deprecation_count, 'deprecation')} logged to #{@file.path}"
-            puts RAISE_ERROR_CONFIG_NOTICE
-          end
-        end
-      end
-    end
-
-    # Deprecation Error
-    DeprecationError = Class.new(StandardError)
-  end
-end

data/rspec-core/lib/rspec/core/formatters/documentation_formatter.rb

@@ -1,68 +0,0 @@
-RSpec::Support.require_rspec_core "formatters/base_text_formatter"
-
-module RSpec
-  module Core
-    module Formatters
-      # @private
-      class DocumentationFormatter < BaseTextFormatter
-        Formatters.register self, :example_group_started, :example_group_finished,
-                            :example_passed, :example_pending, :example_failed
-
-        def initialize(output)
-          super
-          @group_level = 0
-        end
-
-        def example_group_started(notification)
-          output.puts if @group_level == 0
-          output.puts "#{current_indentation}#{notification.group.description.strip}"
-
-          @group_level += 1
-        end
-
-        def example_group_finished(_notification)
-          @group_level -= 1
-        end
-
-        def example_passed(passed)
-          output.puts passed_output(passed.example)
-        end
-
-        def example_pending(pending)
-          output.puts pending_output(pending.example, pending.example.execution_result.pending_message)
-        end
-
-        def example_failed(failure)
-          output.puts failure_output(failure.example, failure.example.execution_result.exception)
-        end
-
-      private
-
-        def passed_output(example)
-          ConsoleCodes.wrap("#{current_indentation}#{example.description.strip}", :success)
-        end
-
-        def pending_output(example, message)
-          ConsoleCodes.wrap("#{current_indentation}#{example.description.strip} (PENDING: #{message})", :pending)
-        end
-
-        def failure_output(example, _exception)
-          ConsoleCodes.wrap("#{current_indentation}#{example.description.strip} (FAILED - #{next_failure_index})", :failure)
-        end
-
-        def next_failure_index
-          @next_failure_index ||= 0
-          @next_failure_index += 1
-        end
-
-        def current_indentation
-          '  ' * @group_level
-        end
-
-        def example_group_chain
-          example_group.parent_groups.reverse
-        end
-      end
-    end
-  end
-end