nodeum_sdk 1.85.1

data/spec/configuration_spec.rb

@@ -0,0 +1,42 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+
+describe Nodeum::Configuration do
+  let(:config) { Nodeum::Configuration.default }
+
+  before(:each) do
+    # uncomment below to setup host and base_path
+    # require 'URI'
+    # uri = URI.parse("http://localhost/api/v2")
+    # Nodeum.configure do |c|
+    #   c.host = uri.host
+    #   c.base_path = uri.path
+    # end
+  end
+
+  describe '#base_url' do
+    it 'should have the default value' do
+      # uncomment below to test default value of the base path
+      # expect(config.base_url).to eq("http://localhost/api/v2")
+    end
+
+    it 'should remove trailing slashes' do
+      [nil, '', '/', '//'].each do |base_path|
+        config.base_path = base_path
+        # uncomment below to test trailing slashes
+        # expect(config.base_url).to eq("http://localhost/api/v2")
+      end
+    end
+  end
+end

data/spec/models/active_job_status_spec.rb

@@ -0,0 +1,63 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ActiveJobStatus
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ActiveJobStatus' do
+  before do
+    # run before each test
+    @instance = Nodeum::ActiveJobStatus.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ActiveJobStatus' do
+    it 'should create an instance of ActiveJobStatus' do
+      expect(@instance).to be_instance_of(Nodeum::ActiveJobStatus)
+    end
+  end
+  describe 'test attribute "job_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "status"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["queued", "working", "completed", "failed"])
+      # validator.allowable_values.each do |value|
+      #   expect { @instance.status = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "progress"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "total"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/api_key_collection_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ApiKeyCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ApiKeyCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::ApiKeyCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ApiKeyCollection' do
+    it 'should create an instance of ApiKeyCollection' do
+      expect(@instance).to be_instance_of(Nodeum::ApiKeyCollection)
+    end
+  end
+  describe 'test attribute "api_keys"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/api_key_full_all_of_spec.rb

@@ -0,0 +1,41 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ApiKeyFullAllOf
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ApiKeyFullAllOf' do
+  before do
+    # run before each test
+    @instance = Nodeum::ApiKeyFullAllOf.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ApiKeyFullAllOf' do
+    it 'should create an instance of ApiKeyFullAllOf' do
+      expect(@instance).to be_instance_of(Nodeum::ApiKeyFullAllOf)
+    end
+  end
+  describe 'test attribute "api_key_scopes"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/api_key_full_spec.rb

@@ -0,0 +1,41 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ApiKeyFull
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ApiKeyFull' do
+  before do
+    # run before each test
+    @instance = Nodeum::ApiKeyFull.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ApiKeyFull' do
+    it 'should create an instance of ApiKeyFull' do
+      expect(@instance).to be_instance_of(Nodeum::ApiKeyFull)
+    end
+  end
+  describe 'test attribute "api_key_scopes"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/api_key_scope_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ApiKeyScope
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ApiKeyScope' do
+  before do
+    # run before each test
+    @instance = Nodeum::ApiKeyScope.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ApiKeyScope' do
+    it 'should create an instance of ApiKeyScope' do
+      expect(@instance).to be_instance_of(Nodeum::ApiKeyScope)
+    end
+  end
+  describe 'test attribute "controller"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "action"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/api_key_spec.rb

@@ -0,0 +1,53 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ApiKey
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ApiKey' do
+  before do
+    # run before each test
+    @instance = Nodeum::ApiKey.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ApiKey' do
+    it 'should create an instance of ApiKey' do
+      expect(@instance).to be_instance_of(Nodeum::ApiKey)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "key"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/attribute_error_spec.rb

@@ -0,0 +1,41 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::AttributeError
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'AttributeError' do
+  before do
+    # run before each test
+    @instance = Nodeum::AttributeError.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of AttributeError' do
+    it 'should create an instance of AttributeError' do
+      expect(@instance).to be_instance_of(Nodeum::AttributeError)
+    end
+  end
+  describe 'test attribute "error"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/blank_spec.rb

@@ -0,0 +1,35 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::Blank
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'Blank' do
+  before do
+    # run before each test
+    @instance = Nodeum::Blank.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of Blank' do
+    it 'should create an instance of Blank' do
+      expect(@instance).to be_instance_of(Nodeum::Blank)
+    end
+  end
+end

data/spec/models/by_date_facet_bucket_all_of_spec.rb

@@ -0,0 +1,41 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ByDateFacetBucketAllOf
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ByDateFacetBucketAllOf' do
+  before do
+    # run before each test
+    @instance = Nodeum::ByDateFacetBucketAllOf.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ByDateFacetBucketAllOf' do
+    it 'should create an instance of ByDateFacetBucketAllOf' do
+      expect(@instance).to be_instance_of(Nodeum::ByDateFacetBucketAllOf)
+    end
+  end
+  describe 'test attribute "val"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end