nodeum_sdk 1.85.1

data/spec/models/tape_drive_collection_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeDriveCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeDriveCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeDriveCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeDriveCollection' do
+    it 'should create an instance of TapeDriveCollection' do
+      expect(@instance).to be_instance_of(Nodeum::TapeDriveCollection)
+    end
+  end
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tape_drives"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/tape_drive_device_collection_spec.rb

@@ -0,0 +1,41 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeDriveDeviceCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeDriveDeviceCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeDriveDeviceCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeDriveDeviceCollection' do
+    it 'should create an instance of TapeDriveDeviceCollection' do
+      expect(@instance).to be_instance_of(Nodeum::TapeDriveDeviceCollection)
+    end
+  end
+  describe 'test attribute "tape_drives"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/tape_drive_device_spec.rb

@@ -0,0 +1,77 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeDriveDevice
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeDriveDevice' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeDriveDevice.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeDriveDevice' do
+    it 'should create an instance of TapeDriveDevice' do
+      expect(@instance).to be_instance_of(Nodeum::TapeDriveDevice)
+    end
+  end
+  describe 'test attribute "serial"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "scsi_address"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "vendor"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "product"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "firmware"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "device"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "sgdevice"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/tape_drive_spec.rb

@@ -0,0 +1,159 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeDrive
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeDrive' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeDrive.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeDrive' do
+    it 'should create an instance of TapeDrive' do
+      expect(@instance).to be_instance_of(Nodeum::TapeDrive)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tape_library_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "comment"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "libso"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "acs"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "lsm"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "panel"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "transport"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "status"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["offline", "online"])
+      # validator.allowable_values.each do |value|
+      #   expect { @instance.status = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "full"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mount_count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "use_to"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "use_by"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "barcode"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "task_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "use_file_processed_size"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "use_file_size_to_process"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "use_file_name_processed"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bandwidth"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/tape_library_all_of_spec.rb

@@ -0,0 +1,75 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeLibraryAllOf
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeLibraryAllOf' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeLibraryAllOf.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeLibraryAllOf' do
+    it 'should create an instance of TapeLibraryAllOf' do
+      expect(@instance).to be_instance_of(Nodeum::TapeLibraryAllOf)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "comment"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "libso"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "status"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["offline", "online"])
+      # validator.allowable_values.each do |value|
+      #   expect { @instance.status = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "price"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/tape_library_collection_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeLibraryCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeLibraryCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeLibraryCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeLibraryCollection' do
+    it 'should create an instance of TapeLibraryCollection' do
+      expect(@instance).to be_instance_of(Nodeum::TapeLibraryCollection)
+    end
+  end
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tape_libraries"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end