nodeum_sdk 1.85.1

data/spec/models/tape_stat_spec.rb

@@ -0,0 +1,335 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TapeStat
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TapeStat' do
+  before do
+    # run before each test
+    @instance = Nodeum::TapeStat.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TapeStat' do
+    it 'should create an instance of TapeStat' do
+      expect(@instance).to be_instance_of(Nodeum::TapeStat)
+    end
+  end
+  describe 'test attribute "log_time"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "barcode"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mounts"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "datasets_written"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "datasets_read"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "recovered_write_data_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "unrecovered_write_data_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "write_servo_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "unrecovered_write_servo_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "recovered_read_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "unrecovered_read_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_mount_unrecovered_write_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_mount_unrecovered_read_errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_mount_mbytes_written"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_mount_mbytes_read"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "lifetime_mbytes_written"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "lifetime_mbytes_read"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_load_write_compression_ratio"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_load_read_compression_ratio"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "medium_mount_time"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "medium_ready_time"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "total_native_capacity"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "total_used_native_capacity"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "write_protect"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "worm"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "beginning_of_medium_passes"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "middle_of_tape_passes"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "read_compression_ratio"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "write_compression_ratio"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mbytes_transferred_to_app_client"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bytes_transferred_to_app_client"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mbytes_read_from_medium"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bytes_read_from_medium"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mbytes_transferred_from_app_client"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bytes_transferred_from_app_client"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mbytes_written_to_medium"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bytes_written_to_medium"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "data_compression_enabled"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "write_retries"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "write_perms"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "suspended_writes"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "fatal_suspended_writes"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "read_retries"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "read_perms"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "suspended_reads"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "fatal_suspended_reads"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "partition_0_remaining_capacity"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "partition_1_remaining_capacity"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "partition_0_maximum_capacity"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "partition_1_maximum_capacity"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/task_callback_collection_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TaskCallbackCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TaskCallbackCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::TaskCallbackCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TaskCallbackCollection' do
+    it 'should create an instance of TaskCallbackCollection' do
+      expect(@instance).to be_instance_of(Nodeum::TaskCallbackCollection)
+    end
+  end
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "task_callbacks"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/task_callback_spec.rb

@@ -0,0 +1,57 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TaskCallback
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TaskCallback' do
+  before do
+    # run before each test
+    @instance = Nodeum::TaskCallback.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TaskCallback' do
+    it 'should create an instance of TaskCallback' do
+      expect(@instance).to be_instance_of(Nodeum::TaskCallback)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "type"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["filter"])
+      # validator.allowable_values.each do |value|
+      #   expect { @instance.type = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "script"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/task_collection_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::TaskCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'TaskCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::TaskCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of TaskCollection' do
+    it 'should create an instance of TaskCollection' do
+      expect(@instance).to be_instance_of(Nodeum::TaskCollection)
+    end
+  end
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tasks"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end