nodeum_sdk 1.85.1

data/spec/models/pool_up_all_of_spec.rb

@@ -0,0 +1,53 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::PoolUpAllOf
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'PoolUpAllOf' do
+  before do
+    # run before each test
+    @instance = Nodeum::PoolUpAllOf.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of PoolUpAllOf' do
+    it 'should create an instance of PoolUpAllOf' do
+      expect(@instance).to be_instance_of(Nodeum::PoolUpAllOf)
+    end
+  end
+  describe 'test attribute "tape_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "nas_share_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "cloud_bucket_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/pool_up_spec.rb

@@ -0,0 +1,53 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::PoolUp
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'PoolUp' do
+  before do
+    # run before each test
+    @instance = Nodeum::PoolUp.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of PoolUp' do
+    it 'should create an instance of PoolUp' do
+      expect(@instance).to be_instance_of(Nodeum::PoolUp)
+    end
+  end
+  describe 'test attribute "tape_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "nas_share_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "cloud_bucket_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/primary_scan_spec.rb

@@ -0,0 +1,69 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::PrimaryScan
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'PrimaryScan' do
+  before do
+    # run before each test
+    @instance = Nodeum::PrimaryScan.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of PrimaryScan' do
+    it 'should create an instance of PrimaryScan' do
+      expect(@instance).to be_instance_of(Nodeum::PrimaryScan)
+    end
+  end
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "pool_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "enabled"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "operand"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "unit"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["minutes", "hours", "days", "weeks", "months", "years"])
+      # validator.allowable_values.each do |value|
+      #   expect { @instance.unit = value }.not_to raise_error
+      # end
+    end
+  end
+
+end

data/spec/models/quota_on_cache_spec.rb

@@ -0,0 +1,35 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::QuotaOnCache
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'QuotaOnCache' do
+  before do
+    # run before each test
+    @instance = Nodeum::QuotaOnCache.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of QuotaOnCache' do
+    it 'should create an instance of QuotaOnCache' do
+      expect(@instance).to be_instance_of(Nodeum::QuotaOnCache)
+    end
+  end
+end

data/spec/models/reset_sections_spec.rb

@@ -0,0 +1,57 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::ResetSections
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'ResetSections' do
+  before do
+    # run before each test
+    @instance = Nodeum::ResetSections.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ResetSections' do
+    it 'should create an instance of ResetSections' do
+      expect(@instance).to be_instance_of(Nodeum::ResetSections)
+    end
+  end
+  describe 'test attribute "value"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["full", "nas_config", "nas_storage", "nas_pools", "tapes_libs", "tapes_drives", "tapes_pools", "clouds_config", "clouds_storage", "clouds_pools", "tasks", "history", "templates", "containers", "catalog", "web_users", "logs", "audits", "statistics", "traces"])
+      # validator.allowable_values.each do |value|
+      #   expect { @instance.value = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "after"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "before"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/reset_spec.rb

@@ -0,0 +1,41 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::Reset
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'Reset' do
+  before do
+    # run before each test
+    @instance = Nodeum::Reset.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of Reset' do
+    it 'should create an instance of Reset' do
+      expect(@instance).to be_instance_of(Nodeum::Reset)
+    end
+  end
+  describe 'test attribute "sections"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/size_to_date_facets_spec.rb

@@ -0,0 +1,83 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::SizeToDateFacets
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'SizeToDateFacets' do
+  before do
+    # run before each test
+    @instance = Nodeum::SizeToDateFacets.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of SizeToDateFacets' do
+    it 'should create an instance of SizeToDateFacets' do
+      expect(@instance).to be_instance_of(Nodeum::SizeToDateFacets)
+    end
+  end
+  describe 'test attribute "less_100_kb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "less_1_mb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "less_10_mb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "less_100_mb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "less_1_gb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "less_10_gb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "less_100_gb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "more_100_gb"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/system_group_collection_spec.rb

@@ -0,0 +1,47 @@
+=begin
+#Nodeum API
+
+## About  This document describes the Nodeum API version 2:  If you are looking for any information about the product itself, reach the product website https://www.nodeum.io. You can also contact us at this email address : info@nodeum.io  # Filter parameters When browsing a list of items, multiple filter parameters may be applied. Some operators can be added to the value as a prefix:  - `=` value is equal. Default operator, may be omitted  - `!=` value is different  - `>` greater than  - `>=` greater than or equal  - `<` lower than  - `>=` lower than or equal  - `><` included in list, items should be separated by `|`  - `!><` not included in list, items should be separated by `|`  - `~` pattern matching, may include `%` (any characters) and `_` (one character)  - `!~` pattern not matching, may include `%` (any characters) and `_` (one character)  
+
+The version of the OpenAPI document: 2.1.0
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 4.3.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Nodeum::SystemGroupCollection
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe 'SystemGroupCollection' do
+  before do
+    # run before each test
+    @instance = Nodeum::SystemGroupCollection.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of SystemGroupCollection' do
+    it 'should create an instance of SystemGroupCollection' do
+      expect(@instance).to be_instance_of(Nodeum::SystemGroupCollection)
+    end
+  end
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "groups"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end