minilab 1.1.0-x86-mswin32-60

data/vendor/ffi-0.4.0-x86-mswin32/ext/ffi_c/libffi/configure.ac

@@ -0,0 +1,365 @@
+dnl Process this with autoconf to create configure
+
+AC_PREREQ(2.59)
+
+AC_INIT([libffi], [3.0.6], [http://gcc.gnu.org/bugs.html])
+AC_CONFIG_HEADERS([fficonfig.h])
+
+AC_CANONICAL_SYSTEM
+target_alias=${target_alias-$host_alias}
+
+. ${srcdir}/configure.host
+
+AM_INIT_AUTOMAKE
+
+# The same as in boehm-gc and libstdc++. Have to borrow it from there.
+# We must force CC to /not/ be precious variables; otherwise
+# the wrong, non-multilib-adjusted value will be used in multilibs.
+# As a side effect, we have to subst CFLAGS ourselves.
+
+m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
+m4_define([_AC_ARG_VAR_PRECIOUS],[])
+AC_PROG_CC
+m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
+
+AC_SUBST(CFLAGS)
+
+AM_PROG_AS
+AM_PROG_CC_C_O
+AC_PROG_LIBTOOL
+
+AM_MAINTAINER_MODE
+
+AC_CHECK_HEADERS(sys/mman.h)
+AC_CHECK_FUNCS(mmap)
+AC_FUNC_MMAP_BLACKLIST
+
+dnl The -no-testsuite modules omit the test subdir.
+AM_CONDITIONAL(TESTSUBDIR, test -d $srcdir/testsuite)
+
+TARGETDIR="unknown"
+case "$host" in
+  alpha*-*-*)
+	TARGET=ALPHA; TARGETDIR=alpha;
+	# Support 128-bit long double, changable via command-line switch.
+	HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
+	;;
+
+  arm*-*-*)
+	TARGET=ARM; TARGETDIR=arm
+	;;
+
+  amd64-*-freebsd*)
+	TARGET=X86_64; TARGETDIR=x86
+  	;;
+
+  cris-*-*)
+	TARGET=LIBFFI_CRIS; TARGETDIR=cris
+	;;
+
+  frv-*-*)
+	TARGET=FRV; TARGETDIR=frv
+	;;
+
+  hppa*-*-linux* | parisc*-*-linux*)
+	TARGET=PA_LINUX; TARGETDIR=pa
+	;;
+  hppa*64-*-hpux*)
+	TARGET=PA64_HPUX; TARGETDIR=pa
+	;;
+  hppa*-*-hpux*)
+	TARGET=PA_HPUX; TARGETDIR=pa
+	;;
+
+  i386-*-freebsd* | i386-*-openbsd*)
+	TARGET=X86_FREEBSD; TARGETDIR=x86
+	;;
+  i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*)
+	TARGET=X86_WIN32; TARGETDIR=x86
+	;;
+  i?86-*-darwin*)
+	TARGET=X86_DARWIN; TARGETDIR=x86
+	;;
+  i?86-*-solaris2.1[[0-9]]*)
+	TARGET=X86_64; TARGETDIR=x86
+	;;
+  i?86-*-*)
+	TARGET=X86; TARGETDIR=x86
+	;;
+
+  ia64*-*-*)
+	TARGET=IA64; TARGETDIR=ia64
+	;;
+
+  m32r*-*-*)
+	TARGET=M32R; TARGETDIR=m32r
+	;;
+
+  m68k-*-*)
+	TARGET=M68K; TARGETDIR=m68k
+	;;
+
+  mips-sgi-irix5.* | mips-sgi-irix6.*)
+	TARGET=MIPS; TARGETDIR=mips
+	;;
+  mips*-*-linux*)
+	TARGET=MIPS; TARGETDIR=mips
+	;;
+
+  powerpc*-*-linux* | powerpc-*-sysv*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
+  powerpc-*-beos*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
+  powerpc-*-darwin*)
+	TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
+	;;
+  powerpc-*-aix* | rs6000-*-aix*)
+	TARGET=POWERPC_AIX; TARGETDIR=powerpc
+	;;
+  powerpc-*-freebsd*)
+	TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
+	;;
+  powerpc*-*-rtems*)
+	TARGET=POWERPC; TARGETDIR=powerpc
+	;;
+
+  s390-*-* | s390x-*-*)
+	TARGET=S390; TARGETDIR=s390
+	;;
+
+  sh-*-* | sh[[34]]*-*-*)
+	TARGET=SH; TARGETDIR=sh
+	;;
+  sh64-*-* | sh5*-*-*)
+	TARGET=SH64; TARGETDIR=sh64
+	;;
+
+  sparc*-*-*)
+	TARGET=SPARC; TARGETDIR=sparc
+	;;
+
+  x86_64-*-darwin*)
+	TARGET=X86_DARWIN; TARGETDIR=x86
+	;;
+  x86_64-*-cygwin* | x86_64-*-mingw*)
+	;;
+  x86_64-*-*)
+	TARGET=X86_64; TARGETDIR=x86
+	;;
+esac
+
+AC_SUBST(AM_RUNTESTFLAGS)
+
+if test $TARGETDIR = unknown; then
+  AC_MSG_ERROR(["libffi has not been ported to $host."])
+fi
+
+AM_CONDITIONAL(MIPS, test x$TARGET = xMIPS)
+AM_CONDITIONAL(SPARC, test x$TARGET = xSPARC)
+AM_CONDITIONAL(X86, test x$TARGET = xX86)
+AM_CONDITIONAL(X86_FREEBSD, test x$TARGET = xX86_FREEBSD)
+AM_CONDITIONAL(X86_WIN32, test x$TARGET = xX86_WIN32)
+AM_CONDITIONAL(X86_DARWIN, test x$TARGET = xX86_DARWIN)
+AM_CONDITIONAL(ALPHA, test x$TARGET = xALPHA)
+AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
+AM_CONDITIONAL(M32R, test x$TARGET = xM32R)
+AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
+AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
+AM_CONDITIONAL(POWERPC_AIX, test x$TARGET = xPOWERPC_AIX)
+AM_CONDITIONAL(POWERPC_DARWIN, test x$TARGET = xPOWERPC_DARWIN)
+AM_CONDITIONAL(POWERPC_FREEBSD, test x$TARGET = xPOWERPC_FREEBSD)
+AM_CONDITIONAL(ARM, test x$TARGET = xARM)
+AM_CONDITIONAL(LIBFFI_CRIS, test x$TARGET = xLIBFFI_CRIS)
+AM_CONDITIONAL(FRV, test x$TARGET = xFRV)
+AM_CONDITIONAL(S390, test x$TARGET = xS390)
+AM_CONDITIONAL(X86_64, test x$TARGET = xX86_64)
+AM_CONDITIONAL(SH, test x$TARGET = xSH)
+AM_CONDITIONAL(SH64, test x$TARGET = xSH64)
+AM_CONDITIONAL(PA_LINUX, test x$TARGET = xPA_LINUX)
+AM_CONDITIONAL(PA_HPUX, test x$TARGET = xPA_HPUX)
+AM_CONDITIONAL(PA64_HPUX, test x$TARGET = xPA64_HPUX)
+
+AC_HEADER_STDC
+AC_CHECK_FUNCS(memcpy)
+AC_FUNC_ALLOCA
+
+AC_CHECK_SIZEOF(double)
+AC_CHECK_SIZEOF(long double)
+
+# Also AC_SUBST this variable for ffi.h.
+if test -z "$HAVE_LONG_DOUBLE"; then
+  HAVE_LONG_DOUBLE=0
+  if test $ac_cv_sizeof_double != $ac_cv_sizeof_long_double; then
+    if test $ac_cv_sizeof_long_double != 0; then
+      HAVE_LONG_DOUBLE=1
+      AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the long double type and it is bigger than a double])
+    fi
+  fi
+fi
+AC_SUBST(HAVE_LONG_DOUBLE)
+
+AC_C_BIGENDIAN
+
+AC_CACHE_CHECK([assembler .cfi pseudo-op support],
+    libffi_cv_as_cfi_pseudo_op, [
+    libffi_cv_as_cfi_pseudo_op=unknown
+    AC_TRY_COMPILE([asm (".cfi_startproc\n\t.cfi_endproc");],,
+		   [libffi_cv_as_cfi_pseudo_op=yes],
+		   [libffi_cv_as_cfi_pseudo_op=no])
+])
+if test "x$libffi_cv_as_cfi_pseudo_op" = xyes; then
+    AC_DEFINE(HAVE_AS_CFI_PSEUDO_OP, 1,
+	      [Define if your assembler supports .cfi_* directives.])
+fi
+
+if test x$TARGET = xSPARC; then
+    AC_CACHE_CHECK([assembler and linker support unaligned pc related relocs],
+	libffi_cv_as_sparc_ua_pcrel, [
+	save_CFLAGS="$CFLAGS"
+	save_LDFLAGS="$LDFLAGS"
+	CFLAGS="$CFLAGS -fpic"
+	LDFLAGS="$LDFLAGS -shared"
+	AC_TRY_LINK([asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text");],,
+		    [libffi_cv_as_sparc_ua_pcrel=yes],
+		    [libffi_cv_as_sparc_ua_pcrel=no])
+	CFLAGS="$save_CFLAGS"
+	LDFLAGS="$save_LDFLAGS"])
+    if test "x$libffi_cv_as_sparc_ua_pcrel" = xyes; then
+	AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
+		  [Define if your assembler and linker support unaligned PC relative relocs.])
+    fi
+
+    AC_CACHE_CHECK([assembler .register pseudo-op support],
+       libffi_cv_as_register_pseudo_op, [
+       libffi_cv_as_register_pseudo_op=unknown
+       # Check if we have .register
+       AC_TRY_COMPILE([asm (".register %g2, #scratch");],,
+		       [libffi_cv_as_register_pseudo_op=yes],
+		       [libffi_cv_as_register_pseudo_op=no])
+    ])
+    if test "x$libffi_cv_as_register_pseudo_op" = xyes; then
+       AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1,
+	       [Define if your assembler supports .register.])
+    fi
+fi
+
+AC_CACHE_CHECK([whether .eh_frame section should be read-only],
+    libffi_cv_ro_eh_frame, [
+	libffi_cv_ro_eh_frame=no
+	echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+	if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
+	    if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
+		libffi_cv_ro_eh_frame=yes
+	    elif grep '.section.*eh_frame.*#alloc' conftest.c \
+		 | grep -v '#write' > /dev/null; then
+		libffi_cv_ro_eh_frame=yes
+	    fi
+	fi
+	rm -f conftest.*
+    ])
+if test "x$libffi_cv_ro_eh_frame" = xyes; then
+    AC_DEFINE(HAVE_RO_EH_FRAME, 1,
+	      [Define if .eh_frame sections should be read-only.])
+    AC_DEFINE(EH_FRAME_FLAGS, "a",
+	      [Define to the flags needed for the .section .eh_frame directive.])
+else
+    AC_DEFINE(EH_FRAME_FLAGS, "aw",
+	      [Define to the flags needed for the .section .eh_frame directive.])
+fi
+
+AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
+    libffi_cv_hidden_visibility_attribute, [
+	echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
+	libffi_cv_hidden_visibility_attribute=no
+	if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
+	    if grep '\.hidden.*foo' conftest.s >/dev/null; then
+		libffi_cv_hidden_visibility_attribute=yes
+	    fi
+	fi
+	rm -f conftest.*
+    ])
+if test $libffi_cv_hidden_visibility_attribute = yes; then
+    AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
+	      [Define if __attribute__((visibility("hidden"))) is supported.])
+fi
+
+AH_BOTTOM([
+#ifdef HAVE_HIDDEN_VISIBILITY_ATTRIBUTE
+#ifdef LIBFFI_ASM
+#define FFI_HIDDEN(name) .hidden name
+#else
+#define FFI_HIDDEN __attribute__ ((visibility ("hidden")))
+#endif
+#else
+#ifdef LIBFFI_ASM
+#define FFI_HIDDEN(name)
+#else
+#define FFI_HIDDEN
+#endif
+#endif
+])
+
+AC_SUBST(TARGET)
+AC_SUBST(TARGETDIR)
+
+AC_SUBST(SHELL)
+
+AC_ARG_ENABLE(debug,
+[  --enable-debug          debugging mode],
+  if test "$enable_debug" = "yes"; then
+    AC_DEFINE(FFI_DEBUG, 1, [Define this if you want extra debugging.])
+  fi)
+
+AC_ARG_ENABLE(structs,
+[  --disable-structs       omit code for struct support],
+  if test "$enable_structs" = "no"; then
+    AC_DEFINE(FFI_NO_STRUCTS, 1, [Define this is you do not want support for aggregate types.])
+  fi)
+
+AC_ARG_ENABLE(raw-api,
+[  --disable-raw-api       make the raw api unavailable],
+  if test "$enable_raw_api" = "no"; then
+    AC_DEFINE(FFI_NO_RAW_API, 1, [Define this is you do not want support for the raw API.])
+  fi)
+
+AC_ARG_ENABLE(purify-safety,
+[  --enable-purify-safety  purify-safe mode],
+  if test "$enable_purify_safety" = "yes"; then
+    AC_DEFINE(USING_PURIFY, 1, [Define this if you are using Purify and want to suppress spurious messages.])
+  fi)
+
+if test -n "$with_cross_host" &&
+   test x"$with_cross_host" != x"no"; then
+  toolexecdir='$(exec_prefix)/$(target_alias)'
+  toolexeclibdir='$(toolexecdir)/lib'
+else
+  toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+  toolexeclibdir='$(libdir)'
+fi
+multi_os_directory=`$CC -print-multi-os-directory`
+case $multi_os_directory in
+  .) ;; # Avoid trailing /.
+  *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+esac
+AC_SUBST(toolexecdir)
+AC_SUBST(toolexeclibdir)
+
+if test "${multilib}" = "yes"; then
+  multilib_arg="--enable-multilib"
+else
+  multilib_arg=
+fi
+
+AC_CONFIG_COMMANDS(include, [test -d include || mkdir include])
+AC_CONFIG_COMMANDS(src, [
+test -d src || mkdir src
+test -d src/$TARGETDIR || mkdir src/$TARGETDIR
+], [TARGETDIR="$TARGETDIR"])
+
+AC_CONFIG_LINKS(include/ffitarget.h:src/$TARGETDIR/ffitarget.h)
+
+AC_CONFIG_FILES(include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile libffi.pc)
+
+AC_OUTPUT

data/vendor/ffi-0.4.0-x86-mswin32/ext/ffi_c/libffi/configure.host

@@ -0,0 +1,11 @@
+# configure.host
+#
+# This shell script handles all host based configuration for libffi.
+# 
+
+# THIS TABLE IS SORTED.  KEEP IT THAT WAY.
+case "${host}" in
+  frv*-elf)
+    LDFLAGS=`echo $LDFLAGS | sed "s/\-B[^ ]*libgloss\/frv\///"`\ -B`pwd`/../libgloss/frv/
+    ;;
+esac

data/vendor/ffi-0.4.0-x86-mswin32/ext/ffi_c/libffi/depcomp

@@ -0,0 +1,584 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2006-10-15.18
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End: