librex 0.0.17 → 0.0.18

data/lib/rex/proto/rfb.rb.ut.rb

@@ -1,37 +0,0 @@
-#!/usr/bin/env ruby
-
-##
-# $Id: $
-##
-
-##
-#
-# RFB protocol support
-#
-# by Joshua J. Drake <jduck>
-#
-# Based on:
-# vnc_auth_none contributed by Matteo Cantoni <goony[at]nothink.org>
-# vnc_auth_login contributed by carstein <carstein.sec[at]gmail.com>
-#
-##
-
-require 'rex/socket'
-require 'rex/proto/rfb'
-
-sd = Rex::Socket::Tcp.create('PeerHost' => ENV["VNCHOST"], 'PeerPort' => Rex::Proto::RFB::DefaultPort)
-
-v = Rex::Proto::RFB::Client.new(sd)
-if not v.connect('password')
-	$stderr.puts v.error
-	exit(1)
-end
-
-loop {
-	sret = select([sd],nil,nil,10)
-	puts sret.inspect
-	if sret and sret[0].include? sd
-		buf = sd.sysread(8192)
-		puts "read #{buf.length} bytes: #{buf.inspect}"
-	end
-}

data/lib/rex/proto/rfb/cipher.rb

@@ -1,84 +0,0 @@
-##
-# $Id: $
-##
-
-##
-#
-# RFB protocol support
-#
-# by Joshua J. Drake <jduck>
-#
-# Based on:
-# vnc_auth_none contributed by Matteo Cantoni <goony[at]nothink.org>
-# vnc_auth_login contributed by carstein <carstein.sec[at]gmail.com>
-#
-##
-
-# Required for VNC authentication
-require 'openssl'
-
-module Rex
-module Proto
-module RFB
-
-##
-# A bit of information about the DES algorithm was found here:
-# http://www.vidarholen.net/contents/junk/vnc.html
-#
-# In addition, VNC uses two individual 8 byte block encryptions rather than
-# using any block mode (like cbc, ecb, etc).
-##
-
-class Cipher
-	
-	def self.mangle_password(password)
-		key = ''
-		key = password.dup if password
-		key.slice!(8,key.length) if key.length > 8
-		key << "\x00" * (8 - key.length) if key.length < 8
-
-		# We have to mangle the key so the LSB are kept vs the MSB
-		[key.unpack('B*').first.scan(/.{8}/).map! { |e| e.reverse }.join].pack('B*')
-	end
-
-	def self.encrypt(plain, password)
-		key = self.mangle_password(password)
-
-		# pad the plain to 16 chars
-		plain << ("\x00" * (16 - plain.length)) if plain.length < 16
-
-		# VNC auth does two 8-byte blocks individually instead supporting some block mode
-		cipher = ''
-		2.times { |x|
-			c = OpenSSL::Cipher::Cipher.new('des')
-			c.encrypt
-			c.key = key
-			cipher << c.update(plain[x*8, 8])
-		}
-
-		cipher
-	end
-
-	#
-	# NOTE: The default password is that of winvnc/etc which is used for
-	# encrypting the password(s) on disk/in registry.
-	#
-	def self.decrypt(cipher, password = "\x17\x52\x6b\x06\x23\x4e\x58\x07")
-		key = self.mangle_password(password)
-
-		# pad the cipher text to 9 bytes
-		cipher << ("\x00" * (9 - cipher.length)) if cipher.length < 9
-
-		# NOTE: This only does one 8 byte block
-		plain = ''
-		c = OpenSSL::Cipher::Cipher.new('des')
-		c.decrypt
-		c.key = key
-		c.update(cipher)
-	end
-
-end
-
-end
-end
-end

data/lib/rex/proto/rfb/client.rb

@@ -1,207 +0,0 @@
-##
-# $Id: $
-##
-
-##
-#
-# RFB protocol support
-#
-# by Joshua J. Drake <jduck>
-#
-# Based on:
-# vnc_auth_none contributed by Matteo Cantoni <goony[at]nothink.org>
-# vnc_auth_login contributed by carstein <carstein.sec[at]gmail.com>
-#
-# TODO: determine how to detect a view-only session.
-##
-
-module Rex
-module Proto
-module RFB
-
-class Client
-
-	def initialize(sock, opts = {})
-		@sock = sock
-		@opts = opts
-
-		@banner = nil
-		@majver = MajorVersion
-		@minver = -1
-		@auth_types = []
-	end
-
-	def read_error_message
-		len = @sock.get_once(4)
-		return 'Unknown error' if not len or len.length != 4
-
-		len = len.unpack("N").first
-		@sock.get_once(len)
-	end
-
-	def handshake
-		@banner = @sock.get_once(12)
-		if not @banner
-			@error = "Unable to obtain banner from server"
-			return false
-		end
-
-		# RFB Protocol Version 3.3 (1998-01)
-		# RFB Protocol Version 3.7 (2003-08)
-		# RFB Protocol Version 3.8 (2007-06)
-
-		if @banner =~ /RFB ([0-9]{3})\.([0-9]{3})/
-			maj = $1.to_i
-			if maj != MajorVersion
-				@error = "Invalid major version number: #{maj}"
-				return false
-			end
-		else
-			@error = "Invalid RFB banner: #{@banner}"
-			return false
-		end
-
-		@minver = $2.to_i
-
-		our_ver = "RFB %03d.%03d\n" % [MajorVersion, @minver]
-		@sock.put(our_ver)
-
-		true
-	end
-
-	def connect(password = nil)
-		return false if not handshake
-		return false if not authenticate(password)
-		return false if not send_client_init
-		true
-	end
-
-	def send_client_init
-		if @opts[:exclusive]
-			@sock.put("\x00") # do share.
-		else
-			@sock.put("\x01") # do share.
-		end
-	end
-
-	def authenticate(password = nil)
-		type = negotiate_authentication
-		return false if not type
-
-		# Authenticate.
-		case type
-		when AuthType::None
-			# Nothing here.
-
-		when AuthType::VNC
-			return false if not negotiate_vnc_auth(password)
-
-		end
-
-		# Handle reading the security result message
-		result = @sock.get_once(4)
-		if not result
-			@error = "Unable to read auth result"
-			return false
-		end
-
-		result = result.unpack('N').first
-		case result
-		when 0
-			return true
-
-		when 1
-			if @minver >= 8
-				msg = read_error_message
-				@error = "Authentication failed: #{msg}"
-			else
-				@error = "Authentication failed"
-			end
-		when 2
-			@error = "Too many authentication attempts"
-		else
-			@error = "Unknown authentication result: #{result}"
-		end
-
-		false
-	end
-
-	def negotiate_authentication
-		# Authentication type negotiation is protocol version specific.
-		if @minver < 7
-			buf = @sock.get_once(4)
-			if not buf
-				@error = "Unable to obtain requested authentication method"
-				return nil
-			end
-			@auth_types = buf.unpack('N')
-			if not @auth_types or @auth_types.first == 0
-				msg = read_error_message
-				@error = "No authentication types available: #{msg}"
-				return nil
-			end
-		else
-			buf = @sock.get_once(1)
-			if not buf
-				@error = "Unable to obtain supported authentication method count"
-				return nil
-			end
-
-			# first byte is number of security types
-			num_types = buf.unpack("C").first
-			if (num_types == 0)
-				msg = read_error_message
-				@error = "No authentication types available: #{msg}"
-				return nil
-			end
-
-			buf = @sock.get_once(num_types)
-			if not buf or buf.length != num_types
-				@error = "Unable to read authentication types"
-				return nil
-			end
-
-			@auth_types = buf.unpack("C*")
-		end
-
-		if not @auth_types or @auth_types.length < 1
-			@error = "No authentication types found"
-			return nil
-		end
-
-		# Select the one we prefer
-		selected = nil
-		selected ||= AuthType::None if @opts[:allow_none] and @auth_types.include? AuthType::None
-		selected ||= AuthType::VNC if @auth_types.include? AuthType::VNC
-
-		if not selected
-			@error = "No supported authentication method found."
-			return nil
-		end
-
-		# For 3.7 and later, clients must state which security-type to use
-		@sock.put([selected].pack('C')) if @minver >= 7
-
-		selected
-	end
-
-	def negotiate_vnc_auth(password = nil)
-		challenge = @sock.get_once(16)
-		if not challenge or challenge.length != 16
-			@error = "Unable to obtain VNC challenge"
-			return false
-		end
-
-		response = Cipher.encrypt(challenge, password)
-		@sock.put(response)
-
-		true
-	end
-
-	attr_reader :error, :majver, :minver, :auth_types
-	attr_reader :view_only
-end
-
-end
-end
-end

data/lib/rex/proto/rfb/constants.rb

@@ -1,52 +0,0 @@
-##
-# $Id: $
-##
-
-##
-#
-# RFB protocol support
-#
-# by Joshua J. Drake <jduck>
-#
-# Based on:
-# vnc_auth_none contributed by Matteo Cantoni <goony[at]nothink.org>
-# vnc_auth_login contributed by carstein <carstein.sec[at]gmail.com>
-#
-##
-
-module Rex
-module Proto
-module RFB
-
-DefaultPort = 5900
-
-# Version information
-MajorVersion = 3
-# NOTE: We will emulate whatever minor version the server reports.
-
-# Security types
-class AuthType
-	Invalid = 0
-	None = 1
-	VNC = 2
-	RA2 = 5
-	RA2ne = 6
-	Tight = 16
-	Ultra = 17
-	TLS = 18
-	VeNCrypt = 19
-	GtkVncSasl = 20
-	MD5Hash = 21
-	ColinDeanXVP = 22
-
-	def self.to_s(num)
-		self.constants.each { |c|
-			return c.to_s if self.const_get(c) == num
-		}
-		'Unknown'
-	end
-end
-
-end
-end
-end

data/lib/rex/proto/smb.rb

@@ -1,7 +0,0 @@
-require 'rex/proto/smb/constants'
-require 'rex/proto/smb/exceptions'
-require 'rex/proto/smb/evasions'
-require 'rex/proto/smb/crypt'
-require 'rex/proto/smb/utils'
-require 'rex/proto/smb/client'
-require 'rex/proto/smb/simpleclient'

data/lib/rex/proto/smb.rb.ts.rb

@@ -1,8 +0,0 @@
-#!/usr/bin/env ruby
-
-require 'rex/test'
-require 'rex/proto/smb/client.rb.ut.rb'
-require 'rex/proto/smb/constants.rb.ut.rb'
-require 'rex/proto/smb/crypt.rb.ut.rb'
-require 'rex/proto/smb/simpleclient.rb.ut.rb'
-require 'rex/proto/smb/utils.rb.ut.rb'

data/lib/rex/proto/smb/client.rb

@@ -1,1952 +0,0 @@
-module Rex
-module Proto
-module SMB
-class Client
-
-require 'rex/text'
-require 'rex/struct2'
-require 'rex/proto/smb/constants'
-require 'rex/proto/smb/exceptions'
-require 'rex/proto/smb/evasions'
-require 'rex/proto/smb/utils'
-require 'rex/proto/smb/crypt'
-require 'rex/proto/ntlm/crypt'
-require 'rex/proto/ntlm/constants'
-require 'rex/proto/ntlm/utils'
-
-
-# Some short-hand class aliases
-CONST = Rex::Proto::SMB::Constants
-CRYPT = Rex::Proto::SMB::Crypt
-UTILS = Rex::Proto::SMB::Utils
-XCEPT = Rex::Proto::SMB::Exceptions
-EVADE = Rex::Proto::SMB::Evasions
-NTLM_CRYPT = Rex::Proto::NTLM::Crypt
-NTLM_CONST = Rex::Proto::NTLM::Constants
-NTLM_UTILS = Rex::Proto::NTLM::Utils
-
-	def initialize(socket)
-		self.socket = socket
-		self.native_os = 'Windows 2000 2195'
-		self.native_lm = 'Windows 2000 5.0'
-		self.encrypt_passwords = true
-		self.extended_security = false
-		self.multiplex_id = rand(0xffff)
-		self.process_id = rand(0xffff)
-		self.read_timeout = 10
-		self.evasion_opts = {
-
-			# Padding is performed between packet headers and data
-			'pad_data' => EVADE::EVASION_NONE,
-
-			# File path padding is performed on all open/create calls
-			'pad_file' => EVADE::EVASION_NONE,
-
-			# Modify the \PIPE\ string in trans_named_pipe calls
-			'obscure_trans_pipe' => EVADE::EVASION_NONE,
-		}
-
-		self.verify_signature = false
-		self.use_ntlmv2 = false
-		self.usentlm2_session = true
-		self.send_lm = true
-		self.use_lanman_key = false
-		self.send_ntlm  = true
-
-		# Signing
-		self.sequence_counter = 0
-		self.signing_key      = ''
-		self.require_signing  = false
-		
-		#Misc
-		self.spnopt = {}
-		
-	end
-
-	# Read a SMB packet from the socket
-	def smb_recv
-
-		data = socket.timed_read(4, self.read_timeout)
-		if (data.nil? or data.length < 4)
-			raise XCEPT::NoReply
-		end
-
-		recv_len = data[2,2].unpack('n')[0]
-		if (recv_len == 0)
-			return data
-		end
-
-		recv_len += 4
-
-		while (data.length != recv_len)
-			buff = ''
-
-			begin
-				buff << self.socket.timed_read(recv_len - data.length, self.read_timeout)
-			rescue Timeout::Error
-			rescue
-				raise XCEPT::ReadPacket
-			end
-
-			if (buff.nil? or buff.length == 0)
-				raise XCEPT::ReadPacket
-			end
-
-			data << buff
-		end
-
-		#signing
-		if self.require_signing && self.signing_key != ''
-			if self.verify_signature		
-				raise XCEPT::IncorrectSigningError if not CRYPT::is_signature_correct?(self.signing_key,self.sequence_counter,data)			
-			end
-			self.sequence_counter += 1
-		end
-
-		return data
-
-
-	end
-
-	# Send a SMB packet down the socket
-	def smb_send(data, evasion_level=0)
-
-		# evasion_level is ignored, since real evasion happens
-		# in the actual socket layer
-
-		size = 0
-		wait = 0
-
-		#signing
-		if self.require_signing && self.signing_key != ''
-			data = CRYPT::sign_smb_packet(self.signing_key, self.sequence_counter, data)
-			self.sequence_counter += 1
-		end
-
-		begin
-			# Just send the packet and return
-			if (size == 0 or size >= data.length)
-				return self.socket.put(data)
-			end
-
-			# Break the packet up into chunks and wait between them
-			ret = 0
-			while ( (chunk = data.slice!(0, size)).length > 0 )
-				ret = self.socket.put(chunk)
-				if (wait > 0)
-					::IO.select(nil, nil, nil, wait)
-				end
-			end
-			return ret
-		end
-	end
-
-	# Set the SMB parameters to some reasonable defaults
-	def smb_defaults(packet)
-		packet.v['MultiplexID'] = self.multiplex_id.to_i
-		packet.v['TreeID'] = self.last_tree_id.to_i
-		packet.v['UserID'] = self.auth_user_id.to_i
-		packet.v['ProcessID'] = self.process_id.to_i
-	end
-
-
-	# The main dispatcher for all incoming SMB packets
-	def smb_recv_parse(expected_type, ignore_errors = false)
-
-		# This will throw an exception if it fails to read the whole packet
-		data = self.smb_recv
-
-		pkt = CONST::SMB_BASE_PKT.make_struct
-		pkt.from_s(data)
-		res  = pkt
-		
-		begin
-			case pkt['Payload']['SMB'].v['Command']
-
-				when CONST::SMB_COM_NEGOTIATE
-					res =  smb_parse_negotiate(pkt, data)
-
-				when CONST::SMB_COM_SESSION_SETUP_ANDX
-					res =  smb_parse_session_setup(pkt, data)
-
-				when CONST::SMB_COM_TREE_CONNECT_ANDX
-					res =  smb_parse_tree_connect(pkt, data)
-
-				when CONST::SMB_COM_TREE_DISCONNECT
-					res =  smb_parse_tree_disconnect(pkt, data)
-
-				when CONST::SMB_COM_NT_CREATE_ANDX
-					res =  smb_parse_create(pkt, data)
-
-				when CONST::SMB_COM_TRANSACTION, CONST::SMB_COM_TRANSACTION2
-					res =  smb_parse_trans(pkt, data)
-
-				when CONST::SMB_COM_NT_TRANSACT
-					res =  smb_parse_nttrans(pkt, data)
-
-				when CONST::SMB_COM_NT_TRANSACT_SECONDARY
-					res =  smb_parse_nttrans(pkt, data)
-
-				when CONST::SMB_COM_OPEN_ANDX
-					res =  smb_parse_open(pkt, data)
-
-				when CONST::SMB_COM_WRITE_ANDX
-					res =  smb_parse_write(pkt, data)
-
-				when CONST::SMB_COM_READ_ANDX
-					res =  smb_parse_read(pkt, data)
-
-				when CONST::SMB_COM_CLOSE
-					res =  smb_parse_close(pkt, data)
-
-				when CONST::SMB_COM_DELETE
-					res =  smb_parse_delete(pkt, data)
-
-				else
-					raise XCEPT::InvalidCommand
-			end
-
-			if (pkt['Payload']['SMB'].v['Command'] != expected_type)
-				raise XCEPT::InvalidType
-			end
-
-			if (ignore_errors == false and pkt['Payload']['SMB'].v['ErrorClass'] != 0)
-				raise XCEPT::ErrorCode
-			end
-
-		rescue XCEPT::InvalidWordCount, XCEPT::InvalidCommand, XCEPT::InvalidType, XCEPT::ErrorCode
-				$!.word_count = pkt['Payload']['SMB'].v['WordCount']
-				$!.command = pkt['Payload']['SMB'].v['Command']
-				$!.error_code = pkt['Payload']['SMB'].v['ErrorClass']
-				raise $!
-		end
-
-		return res
-	end
-
-	# Process incoming SMB_COM_NEGOTIATE packets
-	def smb_parse_negotiate(pkt, data)
-		#Process NTLM negotiate responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 17)
-			res = CONST::SMB_NEG_RES_NT_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process LANMAN negotiate responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 13)
-			res = CONST::SMB_NEG_RES_LM_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process ERROR negotiate responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 1)
-			res = CONST::SMB_NEG_RES_ERR_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_SESSION_SETUP_ANDX packets
-	def smb_parse_session_setup(pkt, data)
-		# Process NTLMSSP negotiate responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 4)
-			res = CONST::SMB_SETUP_NTLMV2_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process LANMAN responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 3)
-			res = CONST::SMB_SETUP_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_TREE_CONNECT_ANDX packets
-	def smb_parse_tree_connect(pkt, data)
-
-		if (pkt['Payload']['SMB'].v['WordCount'] == 3)
-			res = CONST::SMB_TREE_CONN_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_TREE_DISCONNECT packets
-	def smb_parse_tree_disconnect(pkt, data)
-
-		# Process SMB responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			res = CONST::SMB_TREE_DISCONN_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_NT_CREATE_ANDX packets
-	def smb_parse_create(pkt, data)
-
-		# Windows says 42, but Samba says 34, same structure :-/
-		if (pkt['Payload']['SMB'].v['WordCount'] == 42)
-			res = CONST::SMB_CREATE_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		if (pkt['Payload']['SMB'].v['WordCount'] == 34)
-			res = CONST::SMB_CREATE_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_TRANSACTION packets
-	def smb_parse_trans(pkt, data)
-
-		if (pkt['Payload']['SMB'].v['WordCount'] == 10)
-			res = CONST::SMB_TRANS_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_NT_TRANSACT packets
-	def smb_parse_nttrans(pkt, data)
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		if (pkt['Payload']['SMB'].v['WordCount'] >= 18)
-			res = CONST::SMB_NTTRANS_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_OPEN_ANDX packets
-	def smb_parse_open(pkt, data)
-		# Process open responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 15)
-			res = CONST::SMB_OPEN_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_WRITE_ANDX packets
-	def smb_parse_write(pkt, data)
-
-		# Process write responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 6)
-			res = CONST::SMB_WRITE_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_READ_ANDX packets
-	def smb_parse_read(pkt, data)
-
-		# Process read responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 12)
-			res = CONST::SMB_READ_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_CLOSE packets
-	def smb_parse_close(pkt, data)
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			return pkt
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Process incoming SMB_COM_DELETE packets
-	def smb_parse_delete(pkt, data)
-
-		# Process SMB error responses
-		if (pkt['Payload']['SMB'].v['WordCount'] == 0)
-			res = CONST::SMB_DELETE_RES_PKT.make_struct
-			res.from_s(data)
-			return res
-		end
-
-		raise XCEPT::InvalidWordCount
-	end
-
-	# Request a SMB session over NetBIOS
-	def session_request(name = '*SMBSERVER', do_recv = true)
-
-		name ||= '*SMBSERVER'
-
-		data = ''
-		data << "\x20" + UTILS.nbname_encode(name) + "\x00"
-		data << "\x20" + CONST::NETBIOS_REDIR      + "\x00"
-
-		pkt = CONST::NBRAW_PKT.make_struct
-		pkt.v['Type'] = 0x81
-		pkt['Payload'].v['Payload'] = data
-
-		# Most SMB implementations can't handle this being fragmented
-		ret = self.smb_send(pkt.to_s, EVADE::EVASION_NONE)
-		return ret if not do_recv
-
-		res = self.smb_recv
-
-		ack = CONST::NBRAW_PKT.make_struct
-		ack.from_s(res)
-
-		if (ack.v['Type'] != 130)
-			raise XCEPT::NetbiosSessionFailed
-		end
-
-		return ack
-	end
-
-	# Negotiate a SMB dialect
-	def negotiate(smb_extended_security=true, do_recv = true)
-
-		dialects = ['LANMAN1.0', 'LM1.2X002' ]
-
-		if (self.encrypt_passwords)
-			dialects.push('NT LANMAN 1.0', 'NT LM 0.12')
-		end
-
-		data = dialects.collect { |dialect| "\x02" + dialect + "\x00" }.join('')
-
-		pkt = CONST::SMB_NEG_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_NEGOTIATE
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-
-		if(smb_extended_security)
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2801
-		else
-			pkt['Payload']['SMB'].v['Flags2'] = 0xc001
-		end
-
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s, EVADE::EVASION_NONE)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_NEGOTIATE)
-
-		idx = ack['Payload'].v['Dialect']
-
-		# Check for failed dialect selection
-		if (idx < 0 or idx >= dialects.length)
-			return nil
-		end
-
-		# Set the selected dialect
-		self.dialect = dialects[idx]
-
-		# Does the server support extended security negotiation?
-		if (ack['Payload'].v['Capabilities'] & 0x80000000 != 0)
-			self.extended_security = true
-		end
-
-		# Set the security mode
-		self.security_mode = ack['Payload'].v['SecurityMode']
-
-		#set require_signing
-		if (ack['Payload'].v['SecurityMode'] & 0x08 != 0)
-			self.require_signing	= true
-		end
-
-		# Set the challenge key
-		if (ack['Payload'].v['EncryptionKey'] != nil)
-			self.challenge_key = ack['Payload'].v['EncryptionKey']
-		else
-			# Handle Windows NT 4.0 responses
-			if (ack['Payload'].v['KeyLength'] > 0)
-				self.challenge_key = ack['Payload'].v['Payload'][0, ack['Payload'].v['KeyLength']]
-			end
-		end
-
-		# Set the session identifier
-		if (ack['Payload'].v['SessionKey'] != nil)
-			self.session_id = ack['Payload'].v['SessionKey']
-		end
-
-		# Extract the payload (GUID/SecurityBlob)
-		buf = ack['Payload'].v['Payload'] || ''
-
-		# Set the server GUID
-		if (self.extended_security and buf.length >= 16)
-			self.server_guid = buf[0,16]
-		end
-
-		# Set the server SecurityBlob
-		if (self.extended_security and buf.length > 16)
-			# buf[16, buf.length - 16]
-		end
-
-		# The number of 100-nanosecond intervals that have elapsed since January 1, 1601, in
-		# Coordinated Universal Time (UTC) format.
-		# We convert it to a friendly Time object here
-		self.system_time = UTILS.time_smb_to_unix(ack['Payload'].v['SystemTimeHigh'],ack['Payload'].v['SystemTimeLow'])
-		self.system_time = ::Time.at( self.system_time )
-
-		# A signed 16-bit signed integer that represents the server's time zone, in minutes, 
-		# from UTC. The time zone of the server MUST be expressed in minutes, plus or minus, 
-		# from UTC.
-		# NOTE: althought the spec says +/- it doesn't say that it should be inverted :-/
-		system_zone = ack['Payload'].v['ServerTimeZone']
-		# Convert the ServerTimeZone to _seconds_ and back into a signed integer :-/
-		if (system_zone & 0x8000) == 0x8000
-			system_zone = (( (~system_zone)  & 0x0FFF ) + 1 )
-		else
-			system_zone *= -1
-		end
-		self.system_zone = system_zone * 60
-
-		return ack
-	end
-
-
-	# Authenticate and establish a session
-	def session_setup(*args)
-
-		if (self.dialect =~ /^(NT LANMAN 1.0|NT LM 0.12)$/)
-			
-			if (self.challenge_key)
-				return self.session_setup_no_ntlmssp(*args)
-			end
-
-			if ( self.extended_security )
-				return self.session_setup_with_ntlmssp(*args)
-			end
-
-		end
-
-		return self.session_setup_clear(*args)
-	end
-
-	# Authenticate using clear-text passwords
-	def session_setup_clear(user = '', pass = '', domain = '', do_recv = true)
-
-		data = [ pass, user, domain, self.native_os, self.native_lm ].collect{ |a| a + "\x00" }.join('');
-
-		pkt = CONST::SMB_SETUP_LANMAN_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 10
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['PasswordLen'] = pass.length + 1
-		pkt['Payload'].v['Capabilities'] = 64
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX)
-
-		if (ack['Payload'].v['Action'] != 1 and user.length > 0)
-			self.auth_user = user
-		end
-
-		self.auth_user_id = ack['Payload']['SMB'].v['UserID']
-
-		info = ack['Payload'].v['Payload'].split(/\x00/)
-		self.peer_native_os = info[0]
-		self.peer_native_lm = info[1]
-		self.default_domain = info[2]
-
-		return ack
-	end
-
-	# Authenticate without NTLMSSP
-	def session_setup_no_ntlmssp(user = '', pass = '', domain = '', do_recv = true)
-
-		# Requires a challenge key to have been seen during negotiation
-		raise XCEPT::NTLM1MissingChallenge if not self.challenge_key
-
-		#
-		# We can not yet handle signing in this situation
-		# But instead of throwing an exception,we will disable signing, continue and hope for the best.
-		#
-
-		#raise XCEPT::SigningError if self.require_signing
-		self.require_signing = false if self.require_signing
-
-		
-		if NTLM_UTILS.is_pass_ntlm_hash?(pass)
-			arglm = {
-				:lm_hash => [ pass.upcase()[0,32] ].pack('H32'),
-				:challenge =>  self.challenge_key 
-			}
-			hash_lm = NTLM_CRYPT::lm_response(arglm)
-
-			argntlm = {
-				:ntlm_hash =>  [ pass.upcase()[33,65] ].pack('H32'), 
-				:challenge =>  self.challenge_key 
-			}
-			hash_nt = NTLM_CRYPT::ntlm_response(argntlm)
-		else
-			hash_lm = pass.length > 0 ? NTLM_CRYPT.lanman_des(pass, self.challenge_key) : ''
-			hash_nt = pass.length > 0 ? NTLM_CRYPT.ntlm_md4(pass, self.challenge_key)   : ''
-		end
-
-		data = ''
-		data << hash_lm
-		data << hash_nt
-		data << user + "\x00"
-		data << domain + "\x00"
-		data << self.native_os + "\x00"
-		data << self.native_lm + "\x00"
-
-		pkt = CONST::SMB_SETUP_NTLMV1_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		pkt['Payload']['SMB'].v['Flags2'] = 0x2001
-		pkt['Payload']['SMB'].v['WordCount'] = 13
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['PasswordLenLM'] = hash_lm.length
-		pkt['Payload'].v['PasswordLenNT'] = hash_nt.length
-		pkt['Payload'].v['Capabilities'] = 64
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX)
-
-		if (ack['Payload'].v['Action'] != 1 and user.length > 0)
-			self.auth_user = user
-		end
-
-		self.auth_user_id = ack['Payload']['SMB'].v['UserID']
-
-		info = ack['Payload'].v['Payload'].split(/\x00/)
-
-		self.peer_native_os = info[0]
-		self.peer_native_lm = info[1]
-		self.default_domain = info[2]
-
-		return ack
-	end
-
-
-	# Authenticate without ntlmssp with a precomputed hash pair
-	def session_setup_no_ntlmssp_prehash(user, domain, hash_lm, hash_nt, do_recv = true)
-
-		data = ''
-		data << hash_lm
-		data << hash_nt
-		data << user + "\x00"
-		data << domain + "\x00"
-		data << self.native_os + "\x00"
-		data << self.native_lm + "\x00"
-
-		pkt = CONST::SMB_SETUP_NTLMV1_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		pkt['Payload']['SMB'].v['Flags2'] = 0x2001
-		pkt['Payload']['SMB'].v['WordCount'] = 13
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['PasswordLenLM'] = hash_lm.length
-		pkt['Payload'].v['PasswordLenNT'] = hash_nt.length
-		pkt['Payload'].v['Capabilities'] = 64
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX)
-
-		if (ack['Payload'].v['Action'] != 1 and user.length > 0)
-			self.auth_user = user
-		end
-
-		self.auth_user_id = ack['Payload']['SMB'].v['UserID']
-
-		info = ack['Payload'].v['Payload'].split(/\x00/)
-
-		self.peer_native_os = info[0]
-		self.peer_native_lm = info[1]
-		self.default_domain = info[2]
-
-		return ack
-	end
-
-	# Authenticate using extended security negotiation 
-	def session_setup_with_ntlmssp(user = '', pass = '', domain = '', name = nil, do_recv = true)
-
-		ntlm_options = {
-				:signing 		=> self.require_signing,
-				:usentlm2_session 	=> self.usentlm2_session,
-				:use_ntlmv2 		=> self.use_ntlmv2,
-				:send_lm 		=> self.send_lm,
-				:send_ntlm		=> self.send_ntlm,
-				:use_lanman_key		=> self.use_lanman_key
-				}
-
-		ntlmssp_flags = NTLM_UTILS.make_ntlm_flags(ntlm_options)
-
-		if (name == nil)
-			name = Rex::Text.rand_text_alphanumeric(16)
-		end
-
-		blob = NTLM_UTILS.make_ntlmssp_secblob_init(domain, name, ntlmssp_flags)
-
-		native_data = ''
-		native_data << self.native_os + "\x00"
-		native_data << self.native_lm + "\x00"
-
-		pkt = CONST::SMB_SETUP_NTLMV2_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-		pkt['Payload']['SMB'].v['WordCount'] = 12
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['SecurityBlobLen'] = blob.length
-		pkt['Payload'].v['Capabilities'] = 0x800000d4
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['Payload'] = blob + native_data
-
-		ret = self.smb_send(pkt.to_s)
-
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX, true)
-
-
-		# The server doesn't know about NTLM_NEGOTIATE
-		if (ack['Payload']['SMB'].v['ErrorClass'] == 0x00020002)
-			return session_setup_no_ntlmssp(user, pass, domain)
-		end
-
-		# Make sure the error code tells us to continue processing
-		if (ack['Payload']['SMB'].v['ErrorClass'] != 0xc0000016)
-			failure = XCEPT::ErrorCode.new
-			failure.word_count = ack['Payload']['SMB'].v['WordCount']
-			failure.command = ack['Payload']['SMB'].v['Command']
-			failure.error_code = ack['Payload']['SMB'].v['ErrorClass']
-			raise failure
-		end
-
-		# Extract the SecurityBlob from the response
-		data = ack['Payload'].v['Payload']
-		blob = data.slice!(0, ack['Payload'].v['SecurityBlobLen'])
-
-		# Extract the native lanman and os strings
-		info = data.split(/\x00/)
-		self.peer_native_os = info[0]
-		self.peer_native_lm = info[1]
-
-		# Save the temporary UserID for use in the next request
-		temp_user_id = ack['Payload']['SMB'].v['UserID']
-
-		# Get default data
-		blob_data = NTLM_UTILS.parse_ntlm_type_2_blob(blob)
-		self.challenge_key = blob_data[:challenge_key]
-		server_ntlmssp_flags = blob_data[:server_ntlmssp_flags] #else should raise an error
-		#netbios name
-		self.default_name =  blob_data[:default_name] || ''
-		#netbios domain
-		self.default_domain = blob_data[:default_domain] || ''
-		#dns name
-		self.dns_host_name =  blob_data[:dns_host_name] || ''
-		#dns domain
-		self.dns_domain_name =  blob_data[:dns_domain_name] || ''
-		#Client time
-		chall_MsvAvTimestamp = blob_data[:chall_MsvAvTimestamp] || ''
-
-
-		resp_lm, resp_ntlm, client_challenge, ntlm_cli_challenge = NTLM_UTILS.create_lm_ntlm_responses(user, pass, self.challenge_key, domain,
-												default_name, default_domain, dns_host_name,
-												dns_domain_name, chall_MsvAvTimestamp , 
-												self.spnopt, ntlm_options)
-		enc_session_key = ''
-		self.sequence_counter = 0
-
-		if self.require_signing
-			self.signing_key, enc_session_key, ntlmssp_flags = NTLM_UTILS.create_session_key(ntlmssp_flags, server_ntlmssp_flags, user, pass, domain, 
-											self.challenge_key, client_challenge, ntlm_cli_challenge, 
-											ntlm_options)
-		end
-		
-		# Create the security blob data
-		blob = NTLM_UTILS.make_ntlmssp_secblob_auth(domain, name, user, resp_lm, resp_ntlm, enc_session_key, ntlmssp_flags)
-
-		pkt = CONST::SMB_SETUP_NTLMV2_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-		pkt['Payload']['SMB'].v['WordCount'] = 12
-		pkt['Payload']['SMB'].v['UserID'] = temp_user_id
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['Capabilities'] = 0x8000d05c
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['SecurityBlobLen'] = blob.length
-		pkt['Payload'].v['Payload'] = blob + native_data
-
-		# NOTE: if do_recv is set to false, we cant reach here...
-		self.smb_send(pkt.to_s)
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX, true)
-
-		# Make sure that authentication succeeded
-		if (ack['Payload']['SMB'].v['ErrorClass'] != 0)
-		
-			if (user.length == 0)
-				# Ensure that signing is disabled when we hit this corner case
-				self.require_signing = false
-				
-				# Fall back to the non-ntlmssp authentication method
-				return self.session_setup_no_ntlmssp(user, pass, domain)
-			end
-
-			failure = XCEPT::ErrorCode.new
-			failure.word_count = ack['Payload']['SMB'].v['WordCount']
-			failure.command = ack['Payload']['SMB'].v['Command']
-			failure.error_code = ack['Payload']['SMB'].v['ErrorClass']
-			raise failure
-		end
-
-		self.auth_user_id = ack['Payload']['SMB'].v['UserID']
-
-		if (ack['Payload'].v['Action'] != 1 and user.length > 0)
-			self.auth_user = user
-		end
-
-		return ack
-	end
-
-
-	# An exploit helper function for sending arbitrary SPNEGO blobs
-	def session_setup_with_ntlmssp_blob(blob = '', do_recv = true)
-		native_data = ''
-		native_data << self.native_os + "\x00"
-		native_data << self.native_lm + "\x00"
-
-		pkt = CONST::SMB_SETUP_NTLMV2_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		pkt['Payload']['SMB'].v['Flags2'] = 0x2801
-		pkt['Payload']['SMB'].v['WordCount'] = 12
-		pkt['Payload']['SMB'].v['UserID'] = 0
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['SecurityBlobLen'] = blob.length
-		pkt['Payload'].v['Capabilities'] = 0x8000d05c
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['Payload'] = blob + native_data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX, false)
-	end
-
-
-	# Authenticate using extended security negotiation (NTLMSSP), but stop half-way, using the temporary ID
-	def session_setup_with_ntlmssp_temp(domain = '', name = nil, do_recv = true)
-
-		if (name == nil)
-			name = Rex::Text.rand_text_alphanumeric(16)
-		end
-
-		blob = NTLM_UTILS.make_ntlmssp_secblob_init(domain, name)
-
-		native_data = ''
-		native_data << self.native_os + "\x00"
-		native_data << self.native_lm + "\x00"
-
-		pkt = CONST::SMB_SETUP_NTLMV2_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_SESSION_SETUP_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		pkt['Payload']['SMB'].v['Flags2'] = 0x2801
-		pkt['Payload']['SMB'].v['WordCount'] = 12
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['MaxBuff'] = 0xffdf
-		pkt['Payload'].v['MaxMPX'] = 2
-		pkt['Payload'].v['VCNum'] = 1
-		pkt['Payload'].v['SecurityBlobLen'] = blob.length
-		pkt['Payload'].v['Capabilities'] = 0x8000d05c
-		pkt['Payload'].v['SessionKey'] = self.session_id
-		pkt['Payload'].v['Payload'] = blob + native_data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_SESSION_SETUP_ANDX, true)
-
-		# The server doesn't know about NTLM_NEGOTIATE, try ntlmv1
-		if (ack['Payload']['SMB'].v['ErrorClass'] == 0x00020002)
-			return session_setup_no_ntlmssp(user, pass, domain)
-		end
-
-		# Make sure the error code tells us to continue processing
-		if (ack['Payload']['SMB'].v['ErrorClass'] != 0xc0000016)
-			failure = XCEPT::ErrorCode.new
-			failure.word_count = ack['Payload']['SMB'].v['WordCount']
-			failure.command = ack['Payload']['SMB'].v['Command']
-			failure.error_code = ack['Payload']['SMB'].v['ErrorClass']
-			raise failure
-		end
-
-		# Extract the SecurityBlob from the response
-		data = ack['Payload'].v['Payload']
-		blob = data.slice!(0, ack['Payload'].v['SecurityBlobLen'])
-
-		# Extract the native lanman and os strings
-		info = data.split(/\x00/)
-		self.peer_native_os = info[0]
-		self.peer_native_lm = info[1]
-
-		# Save the temporary UserID for use in the next request
-		self.auth_user_id = ack['Payload']['SMB'].v['UserID']
-
-		# Extract the NTLM challenge key the lazy way
-		cidx = blob.index("NTLMSSP\x00\x02\x00\x00\x00")
-
-		if (cidx == -1)
-			raise XCEPT::NTLM2MissingChallenge
-		end
-
-		# Store the challenge key
-		self.challenge_key = blob[cidx + 24, 8]
-
-		return ack
-	end
-
-	# Connect to a specified share with an optional password
-	def tree_connect(share = 'IPC$', pass = '', do_recv = true)
-
-		data = [ pass, share, '?????' ].collect{ |a| a + "\x00" }.join('');
-
-		pkt = CONST::SMB_TREE_CONN_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_TREE_CONNECT_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 4
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['PasswordLen'] = pass.length + 1
-		pkt['Payload'].v['Capabilities'] = 64
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_TREE_CONNECT_ANDX)
-
-		self.last_tree_id = ack['Payload']['SMB'].v['TreeID']
-		# why bother?
-		# info = ack['Payload'].v['Payload'].split(/\x00/)
-
-		return ack
-	end
-
-	# Disconnect from the current tree
-	def tree_disconnect(tree_id = self.last_tree_id, do_recv = true)
-
-		pkt = CONST::SMB_TREE_DISCONN_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_TREE_DISCONNECT
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 0
-		pkt['Payload']['SMB'].v['TreeID'] = tree_id
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_TREE_DISCONNECT)
-
-		if (tree_id == self.last_tree_id)
-			self.last_tree_id = 0
-		end
-
-		return ack
-	end
-
-	# Returns a SMB_CREATE_RES response for a given named pipe
-	def create_pipe(filename, disposition = 1, impersonation = 2)
-		self.create(filename)
-	end
-
-	# Creates a file or opens an existing pipe
-	def create(filename, disposition = 1, impersonation = 2, do_recv = true)
-
-		pkt = CONST::SMB_CREATE_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_NT_CREATE_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 24
-
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['FileNameLen'] = filename.length
-		pkt['Payload'].v['CreateFlags'] = 0x16
-		pkt['Payload'].v['AccessMask'] = 0x02000000 # Maximum Allowed
-		pkt['Payload'].v['ShareAccess'] = 7
-		pkt['Payload'].v['CreateOptions'] = 0
-		pkt['Payload'].v['Impersonation'] = impersonation
-		pkt['Payload'].v['Disposition'] = disposition
-		pkt['Payload'].v['Payload'] = filename + "\x00"
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_NT_CREATE_ANDX)
-
-		# Save off the FileID
-		if (ack['Payload'].v['FileID'] > 0)
-			self.last_file_id = ack['Payload'].v['FileID']
-		end
-
-		return ack
-	end
-
-	# Deletes a file from a share
-	def delete(filename, tree_id = self.last_tree_id, do_recv = true)
-
-		pkt = CONST::SMB_DELETE_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_DELETE
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['TreeID'] = tree_id
-		pkt['Payload']['SMB'].v['WordCount'] = 1
-
-		pkt['Payload'].v['SearchAttributes'] = 0x06
-		pkt['Payload'].v['BufferFormat'] = 4
-		pkt['Payload'].v['Payload'] = filename + "\x00"
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_DELETE)
-
-		return ack
-	end
-
-	# Opens an existing file or creates a new one
-	def open(filename, mode = 0x12, access = 0x42, do_recv = true)
-
-		pkt = CONST::SMB_OPEN_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_OPEN_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 15
-
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['Access'] = access
-		pkt['Payload'].v['SearchAttributes'] = 0x06
-		pkt['Payload'].v['OpenFunction'] = mode
-		pkt['Payload'].v['Payload'] = filename + "\x00"
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_OPEN_ANDX)
-
-		# Save off the FileID
-		if (ack['Payload'].v['FileID'] > 0)
-			self.last_file_id = ack['Payload'].v['FileID']
-		end
-
-		return ack
-	end
-
-	# Closes an open file handle
-	def close(file_id = self.last_file_id, tree_id = self.last_tree_id, do_recv = true)
-
-		pkt = CONST::SMB_CLOSE_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_CLOSE
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['TreeID'] = tree_id
-		pkt['Payload']['SMB'].v['WordCount'] = 3
-
-		pkt['Payload'].v['FileID'] = file_id
-		pkt['Payload'].v['LastWrite'] = -1
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_CLOSE)
-
-		return ack
-	end
-
-	# Writes data to an open file handle
-	def write(file_id = self.last_file_id, offset = 0, data = '', do_recv = true)
-		pkt = CONST::SMB_WRITE_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		data_offset = pkt.to_s.length - 4
-
-		filler = EVADE.make_offset_filler(evasion_opts['pad_data'], 4096 - data.length - data_offset)
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_WRITE_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2805
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 14
-
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['FileID'] = file_id
-		pkt['Payload'].v['Offset'] = offset
-		pkt['Payload'].v['Reserved2'] = -1
-		pkt['Payload'].v['WriteMode'] = 8
-		pkt['Payload'].v['Remaining'] = data.length
-		# pkt['Payload'].v['DataLenHigh'] = (data.length / 65536).to_i
-		pkt['Payload'].v['DataLenLow'] = (data.length % 65536).to_i
-		pkt['Payload'].v['DataOffset'] = data_offset + filler.length
-		pkt['Payload'].v['Payload'] = filler + data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_WRITE_ANDX)
-
-		return ack
-	end
-
-
-	# Reads data from an open file handle
-	def read(file_id = self.last_file_id, offset = 0, data_length = 64000, do_recv = true)
-
-		pkt = CONST::SMB_READ_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_READ_ANDX
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 10
-
-		pkt['Payload'].v['AndX'] = 255
-		pkt['Payload'].v['FileID'] = file_id
-		pkt['Payload'].v['Offset'] = offset
-		# pkt['Payload'].v['MaxCountHigh'] = (data_length / 65536).to_i
-		pkt['Payload'].v['MaxCountLow'] = (data_length % 65536).to_i
-		pkt['Payload'].v['MinCount'] = data_length
-		pkt['Payload'].v['Reserved2'] = -1
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_READ_ANDX, true)
-
-		err = ack['Payload']['SMB'].v['ErrorClass']
-
-		# Catch some non-fatal error codes
-		if (err != 0 && err != CONST::SMB_ERROR_BUFFER_OVERFLOW)
-			failure = XCEPT::ErrorCode.new
-			failure.word_count = ack['Payload']['SMB'].v['WordCount']
-			failure.command = ack['Payload']['SMB'].v['Command']
-			failure.error_code = ack['Payload']['SMB'].v['ErrorClass']
-			raise failure
-		end
-
-		return ack
-	end
-
-
-	# Perform a transaction against a named pipe
-	def trans_named_pipe(file_id, data = '', no_response = nil)
-		pipe = EVADE.make_trans_named_pipe_name(evasion_opts['pad_file'])
-		self.trans(pipe, '', data, 2, [0x26, file_id].pack('vv'), no_response)
-	end
-
-	# Perform a mailslot write over SMB
-	# Warning: This can kill srv.sys unless MS06-035 is applied
-	def trans_mailslot (name, data = '')
-		# Setup data must be:
-		#  Operation: 1 (write)
-		#   Priority: 0
-		#      Class: Reliable
-		self.trans_maxzero(name, '', data, 3, [1, 0, 1].pack('vvv'), true )
-	end
-
-	# Perform a transaction against a given pipe name
-	def trans(pipe, param = '', body = '', setup_count = 0, setup_data = '', no_response = false, do_recv = true)
-
-		# Null-terminate the pipe parameter if needed
-		if (pipe[-1,1] != "\x00")
-			pipe << "\x00"
-		end
-
-		pkt = CONST::SMB_TRANS_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		# Packets larger than mlen will cause XP SP2 to disconnect us ;-(
-		mlen = 4200
-
-		# Figure out how much space is taken up by our current arguments
-		xlen =  pipe.length + param.length + body.length
-
-		filler1 = ''
-		filler2 = ''
-
-		# Fill any available space depending on the evasion settings
-		if (xlen < mlen)
-			filler1 = EVADE.make_offset_filler(evasion_opts['pad_data'], (mlen-xlen)/2)
-			filler2 = EVADE.make_offset_filler(evasion_opts['pad_data'], (mlen-xlen)/2)
-		end
-
-		# Squish the whole thing together
-		data = pipe + filler1 + param + filler2 + body
-
-		# Throw some form of a warning out?
-		if (data.length > mlen)
-			# XXX This call will more than likely fail :-(
-		end
-
-		# Calculate all of the offsets
-		base_offset = pkt.to_s.length + (setup_count * 2) - 4
-		param_offset = base_offset + pipe.length + filler1.length
-		data_offset = param_offset + filler2.length + param.length
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_TRANSACTION
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 14 + setup_count
-
-		pkt['Payload'].v['ParamCountTotal'] = param.length
-		pkt['Payload'].v['DataCountTotal'] = body.length
-		pkt['Payload'].v['ParamCountMax'] = 1024
-		pkt['Payload'].v['DataCountMax'] = 65504
-		pkt['Payload'].v['ParamCount'] = param.length
-		pkt['Payload'].v['ParamOffset'] = param_offset
-		pkt['Payload'].v['DataCount'] = body.length
-		pkt['Payload'].v['DataOffset'] = data_offset
-		pkt['Payload'].v['SetupCount'] = setup_count
-		pkt['Payload'].v['SetupData'] = setup_data
-
-		pkt['Payload'].v['Payload'] = data
-
-		if no_response
-			pkt['Payload'].v['Flags'] = 2
-		end
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if no_response or not do_recv
-
-		self.smb_recv_parse(CONST::SMB_COM_TRANSACTION)
-	end
-
-
-
-	# Perform a transaction against a given pipe name
-	# Difference from trans: sets MaxParam/MaxData to zero
-	# This is required to trigger mailslot bug :-(
-	def trans_maxzero(pipe, param = '', body = '', setup_count = 0, setup_data = '', no_response = false, do_recv = true)
-
-		# Null-terminate the pipe parameter if needed
-		if (pipe[-1] != 0)
-			pipe << "\x00"
-		end
-
-		pkt = CONST::SMB_TRANS_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		# Packets larger than mlen will cause XP SP2 to disconnect us ;-(
-		mlen = 4200
-
-		# Figure out how much space is taken up by our current arguments
-		xlen =  pipe.length + param.length + body.length
-
-		filler1 = ''
-		filler2 = ''
-
-		# Fill any available space depending on the evasion settings
-		if (xlen < mlen)
-			filler1 = EVADE.make_offset_filler(evasion_opts['pad_data'], (mlen-xlen)/2)
-			filler2 = EVADE.make_offset_filler(evasion_opts['pad_data'], (mlen-xlen)/2)
-		end
-
-		# Squish the whole thing together
-		data = pipe + filler1 + param + filler2 + body
-
-		# Throw some form of a warning out?
-		if (data.length > mlen)
-			# XXX This call will more than likely fail :-(
-		end
-
-		# Calculate all of the offsets
-		base_offset = pkt.to_s.length + (setup_count * 2) - 4
-		param_offset = base_offset + pipe.length + filler1.length
-		data_offset = param_offset + filler2.length + param.length
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_TRANSACTION
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 14 + setup_count
-
-		pkt['Payload'].v['ParamCountTotal'] = param.length
-		pkt['Payload'].v['DataCountTotal'] = body.length
-		pkt['Payload'].v['ParamCountMax'] = 0
-		pkt['Payload'].v['DataCountMax'] = 0
-		pkt['Payload'].v['ParamCount'] = param.length
-		pkt['Payload'].v['ParamOffset'] = param_offset
-		pkt['Payload'].v['DataCount'] = body.length
-		pkt['Payload'].v['DataOffset'] = data_offset
-		pkt['Payload'].v['SetupCount'] = setup_count
-		pkt['Payload'].v['SetupData'] = setup_data
-
-		pkt['Payload'].v['Payload'] = data
-
-		if no_response
-			pkt['Payload'].v['Flags'] = 2
-		end
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if no_response or not do_recv
-
-		self.smb_recv_parse(CONST::SMB_COM_TRANSACTION)
-	end
-
-
-	# Perform a transaction against a given pipe name (no null terminator)
-	def trans_nonull(pipe, param = '', body = '', setup_count = 0, setup_data = '', no_response = false, do_recv = true)
-
-		pkt = CONST::SMB_TRANS_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		# Packets larger than mlen will cause XP SP2 to disconnect us ;-(
-		mlen = 4200
-
-		# Figure out how much space is taken up by our current arguments
-		xlen =  pipe.length + param.length + body.length
-
-		filler1 = ''
-		filler2 = ''
-
-		# Fill any available space depending on the evasion settings
-		if (xlen < mlen)
-			filler1 = EVADE.make_offset_filler(evasion_opts['pad_data'], (mlen-xlen)/2)
-			filler2 = EVADE.make_offset_filler(evasion_opts['pad_data'], (mlen-xlen)/2)
-		end
-
-		# Squish the whole thing together
-		data = pipe + filler1 + param + filler2 + body
-
-		# Throw some form of a warning out?
-		if (data.length > mlen)
-			# XXX This call will more than likely fail :-(
-		end
-
-		# Calculate all of the offsets
-		base_offset = pkt.to_s.length + (setup_count * 2) - 4
-		param_offset = base_offset + pipe.length + filler1.length
-		data_offset = param_offset + filler2.length + param.length
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_TRANSACTION
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 14 + setup_count
-
-		pkt['Payload'].v['ParamCountTotal'] = param.length
-		pkt['Payload'].v['DataCountTotal'] = body.length
-		pkt['Payload'].v['ParamCountMax'] = 0
-		pkt['Payload'].v['DataCountMax'] = 0
-		pkt['Payload'].v['ParamCount'] = param.length
-		pkt['Payload'].v['ParamOffset'] = param_offset
-		pkt['Payload'].v['DataCount'] = body.length
-		pkt['Payload'].v['DataOffset'] = data_offset
-		pkt['Payload'].v['SetupCount'] = setup_count
-		pkt['Payload'].v['SetupData'] = setup_data
-
-		pkt['Payload'].v['Payload'] = data
-
-		if no_response
-			pkt['Payload'].v['Flags'] = 2
-		end
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if no_response or not do_recv
-
-		self.smb_recv_parse(CONST::SMB_COM_TRANSACTION)
-	end
-
-	# Perform a transaction2 request using the specified subcommand, parameters, and data
-	def trans2(subcommand, param = '', body = '', do_recv = true)
-
-		setup_count = 1
-		setup_data = [subcommand].pack('v')
-
-		data = param + body
-
-		pkt = CONST::SMB_TRANS2_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		base_offset = pkt.to_s.length + (setup_count * 2) - 4
-		param_offset = base_offset
-		data_offset = param_offset + param.length
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_TRANSACTION2
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 14 + setup_count
-
-		pkt['Payload'].v['ParamCountTotal'] = param.length
-		pkt['Payload'].v['DataCountTotal'] = body.length
-		pkt['Payload'].v['ParamCountMax'] = 1024
-		pkt['Payload'].v['DataCountMax'] = 65504
-		pkt['Payload'].v['ParamCount'] = param.length
-		pkt['Payload'].v['ParamOffset'] = param_offset
-		pkt['Payload'].v['DataCount'] = body.length
-		pkt['Payload'].v['DataOffset'] = data_offset
-		pkt['Payload'].v['SetupCount'] = setup_count
-		pkt['Payload'].v['SetupData'] = setup_data
-
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_TRANSACTION2)
-
-		return ack
-	end
-
-
-	# Perform a nttransaction request using the specified subcommand, parameters, and data
-	def nttrans(subcommand, param = '', body = '', setup_count = 0, setup_data = '', do_recv = true)
-
-		data = param + body
-
-		pkt = CONST::SMB_NTTRANS_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		base_offset = pkt.to_s.length + (setup_count * 2) - 4
-		param_offset = base_offset
-		data_offset = param_offset + param.length
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_NT_TRANSACT
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 19 + setup_count
-
-		pkt['Payload'].v['ParamCountTotal'] = param.length
-		pkt['Payload'].v['DataCountTotal'] = body.length
-		pkt['Payload'].v['ParamCountMax'] = 1024
-		pkt['Payload'].v['DataCountMax'] = 65504
-		pkt['Payload'].v['ParamCount'] = param.length
-		pkt['Payload'].v['ParamOffset'] = param_offset
-		pkt['Payload'].v['DataCount'] = body.length
-		pkt['Payload'].v['DataOffset'] = data_offset
-		pkt['Payload'].v['SetupCount'] = setup_count
-		pkt['Payload'].v['SetupData'] = setup_data
-		pkt['Payload'].v['Subcommand'] = subcommand
-
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_NT_TRANSACT)
-		return ack
-	end
-
-	# Perform a nttransaction request using the specified subcommand, parameters, and data
-	def nttrans_secondary(param = '', body = '', do_recv = true)
-
-		data = param + body
-
-		pkt = CONST::SMB_NTTRANS_SECONDARY_PKT.make_struct
-		self.smb_defaults(pkt['Payload']['SMB'])
-
-		base_offset = pkt.to_s.length - 4
-		param_offset = base_offset
-		data_offset = param_offset + param.length
-
-		pkt['Payload']['SMB'].v['Command'] = CONST::SMB_COM_NT_TRANSACT_SECONDARY
-		pkt['Payload']['SMB'].v['Flags1'] = 0x18
-		if self.require_signing
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] = 0x2807
-		else
-			#ascii
-			pkt['Payload']['SMB'].v['Flags2'] =  0x2801
-		end
-
-		pkt['Payload']['SMB'].v['WordCount'] = 18
-
-		pkt['Payload'].v['ParamCountTotal'] = param.length
-		pkt['Payload'].v['DataCountTotal'] = body.length
-		pkt['Payload'].v['ParamCount'] = param.length
-		pkt['Payload'].v['ParamOffset'] = param_offset
-		pkt['Payload'].v['DataCount'] = body.length
-		pkt['Payload'].v['DataOffset'] = data_offset
-
-		pkt['Payload'].v['Payload'] = data
-
-		ret = self.smb_send(pkt.to_s)
-		return ret if not do_recv
-
-		ack = self.smb_recv_parse(CONST::SMB_COM_NT_TRANSACT_SECONDARY)
-		return ack
-	end
-
-	def queryfs(level)
-		parm = [level].pack('v')
-
-		begin
-			resp = trans2(CONST::TRANS2_QUERY_FS_INFO, parm, '')
-
-			pcnt = resp['Payload'].v['ParamCount']
-			dcnt = resp['Payload'].v['DataCount']
-			poff = resp['Payload'].v['ParamOffset']
-			doff = resp['Payload'].v['DataOffset']
-
-			# Get the raw packet bytes
-			resp_rpkt = resp.to_s
-
-			# Remove the NetBIOS header
-			resp_rpkt.slice!(0, 4)
-
-			resp_parm = resp_rpkt[poff, pcnt]
-			resp_data = resp_rpkt[doff, dcnt]
-			return resp_data
-
-		rescue ::Exception
-			raise $!
-		end
-	end
-
-	def symlink(src,dst)
-		parm = [513, 0x00000000].pack('vV') + src + "\x00"
-
-		begin
-			resp = trans2(CONST::TRANS2_SET_PATH_INFO, parm, dst + "\x00")
-
-			pcnt = resp['Payload'].v['ParamCount']
-			dcnt = resp['Payload'].v['DataCount']
-			poff = resp['Payload'].v['ParamOffset']
-			doff = resp['Payload'].v['DataOffset']
-
-			# Get the raw packet bytes
-			resp_rpkt = resp.to_s
-
-			# Remove the NetBIOS header
-			resp_rpkt.slice!(0, 4)
-
-			resp_parm = resp_rpkt[poff, pcnt]
-			resp_data = resp_rpkt[doff, dcnt]
-			return resp_data
-
-		rescue ::Exception
-			raise $!
-		end
-	end
-
-	# Obtains allocation information on the mounted tree
-	def queryfs_info_allocation
-		data = queryfs(CONST::SMB_INFO_ALLOCATION)
-		head = %w{fs_id sectors_per_unit unit_total units_available bytes_per_sector}
-		vals = data.unpack('VVVVv')
-		info = { }
-		head.each_index {|i| info[head[i]]=vals[i]}
-		return info
-	end
-
-	# Obtains volume information on the mounted tree
-	def queryfs_info_volume
-		data = queryfs(CONST::SMB_INFO_VOLUME)
-		vals = data.unpack('VCA*')
-		return {
-			'serial' => vals[0],
-			'label'  => vals[2][0,vals[1]].gsub("\x00", '')
-		}
-	end
-
-	# Obtains file system volume information on the mounted tree
-	def queryfs_fs_volume
-		data = queryfs(CONST::SMB_QUERY_FS_VOLUME_INFO)
-		vals = data.unpack('VVVVCCA*')
-		return {
-			'create_time' => (vals[1] << 32) + vals[0],
-			'serial'      => vals[2],
-			'label'       => vals[6][0,vals[3]].gsub("\x00", '')
-		}
-	end
-
-	# Obtains file system size information on the mounted tree
-	def queryfs_fs_size
-		data = queryfs(CONST::SMB_QUERY_FS_SIZE_INFO)
-		vals = data.unpack('VVVVVV')
-		return {
-			'total_alloc_units' => (vals[1] << 32) + vals[0],
-			'total_free_units'  => (vals[3] << 32) + vals[2],
-			'sectors_per_unit'  => vals[4],
-			'bytes_per_sector'  => vals[5]
-		}
-	end
-
-	# Obtains file system device information on the mounted tree
-	def queryfs_fs_device
-		data = queryfs(CONST::SMB_QUERY_FS_DEVICE_INFO)
-		vals = data.unpack('VV')
-		return {
-			'device_type'   => vals[0],
-			'device_chars'  => vals[1],
-		}
-	end
-
-	# Obtains file system attribute information on the mounted tree
-	def queryfs_fs_attribute
-		data = queryfs(CONST::SMB_QUERY_FS_ATTRIBUTE_INFO)
-		vals = data.unpack('VVVA*')
-		return {
-			'fs_attributes' => vals[0],
-			'max_file_name' => vals[1],
-			'fs_name'       => vals[3][0, vals[2]].gsub("\x00", '')
-		}
-	end
-
-	# Enumerates a specific path on the mounted tree
-	def find_first(path)
-		files = { }
-		parm = [
-			26,  # Search for ALL files
-			512, # Maximum search count
-			6,   # Resume and Close on End of Search
-			260, # Level of interest
-			0,   # Storage type is zero
-		].pack('vvvvV') + path + "\x00"
-
-		begin
-			resp = trans2(CONST::TRANS2_FIND_FIRST2, parm, '')
-
-			pcnt = resp['Payload'].v['ParamCount']
-			dcnt = resp['Payload'].v['DataCount']
-			poff = resp['Payload'].v['ParamOffset']
-			doff = resp['Payload'].v['DataOffset']
-
-			# Get the raw packet bytes
-			resp_rpkt = resp.to_s
-
-			# Remove the NetBIOS header
-			resp_rpkt.slice!(0, 4)
-
-			resp_parm = resp_rpkt[poff, pcnt]
-			resp_data = resp_rpkt[doff, dcnt]
-
-			# search id, search count, end of search, error offset, last name offset
-			sid, scnt, eos, eoff, loff = resp_parm.unpack('v5')
-
-			didx = 0
-			while (didx < resp_data.length)
-				info_buff = resp_data[didx, 70]
-				break if info_buff.length != 70
-				info = info_buff.unpack(
-					'V'+	# Next Entry Offset
-					'V'+	# File Index
-					'VV'+	# Time Create
-					'VV'+	# Time Last Access
-					'VV'+	# Time Last Write
-					'VV'+	# Time Change
-					'VV'+	# End of File
-					'VV'+	# Allocation Size
-					'V'+	# File Attributes
-					'V'+	# File Name Length
-					'V'+	# Extended Attr List Length
-					'C'+	# Short File Name Length
-					'C' 	# Reserved
-				)
-				name = resp_data[didx + 70 + 24, info[15]].sub!(/\x00+$/, '')
-				files[name] =
-				{
-					'type' => (info[14] & 0x10) ? 'D' : 'F',
-					'attr' => info[14],
-					'info' => info
-				}
-
-				break if info[0] == 0
-				didx += info[0]
-			end
-
-			last_search_id = sid
-
-		rescue ::Exception
-			raise $!
-		end
-
-		return files
-	end
-
-	# TODO: Finish this method... requires search_id, resume_key, and filename from first
-=begin
-	def find_next(path, sid = last_search_id)
-
-		parm = [
-			sid, # Search ID
-			512, # Maximum search count
-			260, # Level of interest
-			0,   # Resume key from previous
-			1,   # Close search if end of search
-		].pack('vvvVv') + path + "\x00"
-
-		return files
-	end
-=end
-
-	# Creates a new directory on the mounted tree
-	def create_directory(name)
-		files = { }
-		parm = [0].pack('V') + name + "\x00"
-		resp = trans2(CONST::TRANS2_CREATE_DIRECTORY, parm, '')
-	end
-
-# public read/write methods
-	attr_accessor	:native_os, :native_lm, :encrypt_passwords, :extended_security, :read_timeout, :evasion_opts
-	attr_accessor	:verify_signature, :use_ntlmv2, :usentlm2_session, :send_lm, :use_lanman_key, :send_ntlm 
-	attr_accessor  	:system_time, :system_zone
-	#misc
-	attr_accessor   :spnopt # used for SPN
-
-# public read methods
-	attr_reader		:dialect, :session_id, :challenge_key, :peer_native_lm, :peer_native_os
-	attr_reader		:default_domain, :default_name, :auth_user, :auth_user_id
-	attr_reader		:multiplex_id, :last_tree_id, :last_file_id, :process_id, :last_search_id
-	attr_reader		:dns_host_name, :dns_domain_name
-	attr_reader		:security_mode, :server_guid
-	#signing related 
-	attr_reader		:sequence_counter,:signing_key, :require_signing
-
-# private methods
-	attr_writer		:dialect, :session_id, :challenge_key, :peer_native_lm, :peer_native_os
-	attr_writer		:default_domain, :default_name, :auth_user, :auth_user_id
-	attr_writer		:dns_host_name, :dns_domain_name
-	attr_writer		:multiplex_id, :last_tree_id, :last_file_id, :process_id, :last_search_id
-	attr_writer		:security_mode, :server_guid
-	#signing related 
-	attr_writer		:sequence_counter,:signing_key, :require_signing
-
-	attr_accessor	:socket
-
-
-end
-end
-end
-end