librex 0.0.17 → 0.0.18

data/lib/rex/constants.rb

@@ -1,113 +0,0 @@
-#
-# Log severities
-#
-LOG_ERROR = 'error'
-LOG_DEBUG = 'debug'
-LOG_INFO  = 'info'
-LOG_WARN  = 'warn'
-LOG_RAW   = 'raw'
-
-##
-#
-# Log levels
-#
-##
-
-# 
-# LEV_0 - Default
-#
-# This log level is the default log level if none is specified.  It should be
-# used when a log message should always be displayed when logging is enabled.
-# Very few log messages should occur at this level aside from necessary
-# information logging and error/warning logging.  Debug logging at level zero
-# is not advised.
-#
-LEV_0     = 0
-
-#
-# LEV_1 - Extra
-#
-# This log level should be used when extra information may be needed to
-# understand the cause of an error or warning message or to get debugging
-# information that might give clues as to why something is happening.  This 
-# log level should be used only when information may be useful to understanding
-# the behavior of something at a basic level.  This log level should not be
-# used in an exhaustively verbose fashion.
-#
-LEV_1     = 1
-
-#
-# LEV_2 - Verbose
-#
-# This log level should be used when verbose information may be needed to
-# analyze the behavior of the framework.  This should be the default log
-# level for all detailed information not falling into LEV_0 or LEV_1.
-# It is recommended that this log level be used by default if you are
-# unsure.
-#
-LEV_2     = 2
-
-#
-# LEV_3 - Insanity
-#
-# This log level should contain very verbose information about the 
-# behavior of the framework, such as detailed information about variable
-# states at certain phases including, but not limited to, loop iterations,
-# function calls, and so on.  This log level will rarely be displayed, 
-# but when it is the information provided should make it easy to analyze
-# any problem.
-#
-LEV_3     = 3
-
-
-#
-# Architecture constants
-#
-ARCH_ANY    = '_any_'
-ARCH_X86    = 'x86'
-ARCH_X86_64 = 'x86_64'
-ARCH_X64    = 'x64' # To be used for compatability with ARCH_X86_64
-ARCH_MIPS   = 'mips'
-ARCH_MIPSLE = 'mipsle'
-ARCH_MIPSBE = 'mipsbe'
-ARCH_PPC    = 'ppc'
-ARCH_PPC64  = 'ppc64'
-ARCH_CBEA   = 'cbea'
-ARCH_CBEA64 = 'cbea64'
-ARCH_SPARC  = 'sparc'
-ARCH_CMD    = 'cmd'
-ARCH_PHP    = 'php'
-ARCH_TTY    = 'tty'
-ARCH_ARMLE  = 'armle'
-ARCH_ARMBE  = 'armbe'
-ARCH_JAVA   = 'java'
-ARCH_TYPES  =
-	[
-		ARCH_X86,
-		ARCH_X86_64,
-		ARCH_MIPS,
-		ARCH_MIPSLE,
-		ARCH_MIPSBE,
-		ARCH_PPC,
-		ARCH_PPC64,
-		ARCH_CBEA,
-		ARCH_CBEA64,
-		ARCH_SPARC,
-		ARCH_ARMLE,
-		ARCH_ARMBE,
-		ARCH_CMD,
-		ARCH_PHP,
-		ARCH_TTY,
-		ARCH_JAVA
-	]
-
-ARCH_ALL = ARCH_TYPES
-
-#
-# Endian constants
-#
-ENDIAN_LITTLE = 0
-ENDIAN_BIG    = 1
-
-IS_ENDIAN_LITTLE = ( [1].pack('s') == "\x01\x00" ) ? true : false
-IS_ENDIAN_BIG    = ( not IS_ENDIAN_LITTLE )

data/lib/rex/elfparsey.rb

@@ -1,11 +0,0 @@
-#!/usr/bin/env ruby
-
-# $Id: elfparsey.rb 5413 2008-02-13 02:43:56Z ramon $
-
-module Rex
-module ElfParsey
-
-end
-end
-
-require 'rex/elfparsey/elf'

data/lib/rex/elfparsey/elf.rb

@@ -1,123 +0,0 @@
-#!/usr/bin/env ruby
-
-# $Id: elf.rb 6615 2009-06-03 01:39:54Z hdm $
-
-require 'rex/elfparsey/elfbase'
-require 'rex/elfparsey/exceptions'
-require 'rex/image_source'
-
-module Rex
-module ElfParsey
-class Elf < ElfBase
-
-	attr_accessor :elf_header, :program_header, :base_addr, :isource
-
-	def initialize(isource)
-		offset = 0
-		base_addr = 0
-
-		# ELF Header
-		elf_header = ElfHeader.new(isource.read(offset, ELF_HEADER_SIZE))
-
-		# Data encoding
-		ei_data = elf_header.e_ident[EI_DATA,1].unpack("C")[0]
-
-		e_phoff = elf_header.e_phoff
-		e_phentsize = elf_header.e_phentsize
-		e_phnum = elf_header.e_phnum
-
-		# Program Header Table
-		program_header = []
-
-		e_phnum.times do |i|
-			offset = e_phoff + (e_phentsize * i)
-
-			program_header << ProgramHeader.new(
-				isource.read(offset, PROGRAM_HEADER_SIZE), ei_data
-			)
-
-			if program_header[-1].p_type == PT_LOAD && base_addr == 0
-				base_addr = program_header[-1].p_vaddr
-			end
-
-		end
-
-		self.elf_header = elf_header
-		self.program_header = program_header
-		self.base_addr = base_addr
-		self.isource = isource
-	end
-
-	def self.new_from_file(filename, disk_backed = false)
-
-		file = ::File.new(filename)
-		# file.binmode # windows... :\
-
-		if disk_backed
-			return self.new(ImageSource::Disk.new(file))
-		else
-			obj = new_from_string(file.read)
-			file.close
-			return obj
-		end
-	end
-
-	def self.new_from_string(data)
-		return self.new(ImageSource::Memory.new(data))
-	end
-
-	#
-	# Returns true if this binary is for a 64-bit architecture.
-	#
-	def ptr_64?
-		unless [ ELFCLASS32, ELFCLASS64 ].include?(
-		elf_header.e_ident[EI_CLASS,1].unpack("C*")[0])
-			raise ElfHeaderError, 'Invalid class', caller
-		end
-
-		elf_header.e_ident[EI_CLASS,1].unpack("C*")[0] == ELFCLASS64
-	end
-
-	#
-	# Returns true if this binary is for a 32-bit architecture.
-	# This check does not take into account 16-bit binaries at the moment.
-	#
-	def ptr_32?
-		ptr_64? == false
-	end
-
-	#
-	# Converts a virtual address to a string representation based on the
-	# underlying architecture.
-	#
-	def ptr_s(rva)
-		(ptr_32?) ? ("0x%.8x" % rva) : ("0x%.16x" % rva)
-	end
-
-	def offset_to_rva(offset)
-		base_addr + offset
-	end
-
-	def rva_to_offset(rva)
-		rva - base_addr
-	end
-
-	def read(offset, len)
-		isource.read(offset, len)
-	end
-
-	def read_rva(rva, len)
-		isource.read(rva_to_offset(rva), len)
-	end
-
-	def index(*args)
-		isource.index(*args)
-	end
-
-	def close
-		isource.close
-	end
-
-end
-end
-end

data/lib/rex/elfparsey/elfbase.rb

@@ -1,258 +0,0 @@
-#!/usr/bin/env ruby
-
-# $Id: elfbase.rb 9937 2010-07-27 18:03:18Z jduck $
-
-require 'rex/struct2'
-
-module Rex
-module ElfParsey
-class ElfBase
-
-	# ELF Header
-
-	ELF_HEADER_SIZE = 52
-
-	EI_NIDENT = 16
-
-	ELF32_EHDR_LSB = Rex::Struct2::CStructTemplate.new(
-		[ 'string',  'e_ident',     EI_NIDENT, '' ],
-		[ 'uint16v', 'e_type',      0 ],
-		[ 'uint16v', 'e_machine',   0 ],
-		[ 'uint32v', 'e_version',   0 ],
-		[ 'uint32v', 'e_entry',     0 ],
-		[ 'uint32v', 'e_phoff',     0 ],
-		[ 'uint32v', 'e_shoff',     0 ],
-		[ 'uint32v', 'e_flags',     0 ],
-		[ 'uint16v', 'e_ehsize',    0 ],
-		[ 'uint16v', 'e_phentsize', 0 ],
-		[ 'uint16v', 'e_phnum',     0 ],
-		[ 'uint16v', 'e_shentsize', 0 ],
-		[ 'uint16v', 'e_shnum',     0 ],
-		[ 'uint16v', 'e_shstrndx',  0 ]
-	)
-
-	ELF32_EHDR_MSB = Rex::Struct2::CStructTemplate.new(
-		[ 'string',  'e_ident',     EI_NIDENT, '' ],
-		[ 'uint16n', 'e_type',      0 ],
-		[ 'uint16n', 'e_machine',   0 ],
-		[ 'uint32n', 'e_version',   0 ],
-		[ 'uint32n', 'e_entry',     0 ],
-		[ 'uint32n', 'e_phoff',     0 ],
-		[ 'uint32n', 'e_shoff',     0 ],
-		[ 'uint32n', 'e_flags',     0 ],
-		[ 'uint16n', 'e_ehsize',    0 ],
-		[ 'uint16n', 'e_phentsize', 0 ],
-		[ 'uint16n', 'e_phnum',     0 ],
-		[ 'uint16n', 'e_shentsize', 0 ],
-		[ 'uint16n', 'e_shnum',     0 ],
-		[ 'uint16n', 'e_shstrndx',  0 ]
-	)
-
-	# e_type  This member identifies the object file type
-
-	ET_NONE   = 0       # No file type
-	ET_REL    = 1       # Relocatable file
-	ET_EXEC   = 2       # Executable file
-	ET_DYN    = 3       # Shared object file
-	ET_CORE   = 4       # Core file
-	ET_LOPROC = 0xff00  # Processor-specific
-	ET_HIPROC = 0xffff  # Processor-specific
-
-	#
-	# e_machine  This member's value specifies the required architecture for an
-	# individual file.
-	#
-
-	# ET_NONE        = 0   # No machine
-	EM_M32         = 1   # AT&T WE 32100
-	EM_SPARC       = 2   # SPARC
-	EM_386         = 3   # Intel Architecture
-	EM_68K         = 4   # Motorola 68000
-	EM_88K         = 5   # Motorola 88000
-	EM_860         = 7   # Intel 80860
-	EM_MIPS        = 8   # MIPS RS3000 Big-Endian
-	EM_MIPS_RS4_BE = 10  # MIPS RS4000 Big-Endian
-
-	# e_version  This member identifies the object file version
-
-	EV_NONE    = 0  # Invalid version
-	EV_CURRENT = 1  # Current version
-
-
-	# ELF Identification
-
-	# e_ident[]  Identification indexes
-
-	EI_MAG0    = 0   # File identification
-	EI_MAG1    = 1   # File identification
-	EI_MAG2    = 2   # File identification
-	EI_MAG3    = 3   # File identification
-	EI_CLASS   = 4   # File class
-	EI_DATA    = 5   # Data encoding
-	EI_VERSION = 6   # File version
-	EI_PAD     = 7   # Start of padding bytes
-	# EI_NIDENT  = 16  # Size of e_ident[]
-
-	#
-	# EI_MAG0 to EI_MAG3  A file's first 4 bytes hold a "magic number",
-	# identifying the file as an ELF object file.
-	#
-
-	ELFMAG0 = 0x7f  # e_ident[EI_MAG0]
-	ELFMAG1 = ?E   # e_ident[EI_MAG1]
-	ELFMAG2 = ?L   # e_ident[EI_MAG2]
-	ELFMAG3 = ?F   # e_ident[EI_MAG3]
-
-	ELFMAG = ELFMAG0.chr + ELFMAG1.chr + ELFMAG2.chr + ELFMAG3.chr
-
-	# EI_CLASS  Identifies the file's class, or capacity
-
-	ELFCLASSNONE = 0  # Invalid class
-	ELFCLASS32   = 1  # 32-bit objects
-	ELFCLASS64   = 2  # 64-bit objects
-
-	#
-	# EI_DATA  Specifies the data encoding of the processor-specific data in
-	# the object file. The following encodings are currently defined.
-	#
-
-	ELFDATANONE = 0  # Invalid data encoding
-	ELFDATA2LSB = 1  # Least significant byte first
-	ELFDATA2MSB = 2  # Most significant byte first
-
-	class GenericStruct
-		attr_accessor :struct
-		def initialize(_struct)
-			self.struct = _struct
-		end
-
-		# The following methods are just pass-throughs for struct
-		
-		# Access a value
-		def v
-			struct.v
-			
-		end
-		
-		# Access a value by array 
-		def [](*args)
-			struct[*args]
-		end
-		
-		# Obtain an array of all fields
-		def keys
-			struct.keys
-		end
-		
-		def method_missing(meth, *args)
-			v[meth.to_s] || (raise NoMethodError.new, meth)
-		end
-	end
-
-	class GenericHeader < GenericStruct
-	end
-
-	class ElfHeader < GenericHeader
-		def initialize(rawdata)
-
-			# Identify the data encoding and parse ELF Header
-			elf_header = ELF32_EHDR_LSB.make_struct
-
-			if !elf_header.from_s(rawdata)
-				raise ElfHeaderError, "Couldn't parse ELF Header", caller
-			end
-
-			if elf_header.v['e_ident'][EI_DATA,1].unpack('C')[0] == ELFDATA2MSB
-				elf_header = ELF32_EHDR_MSB.make_struct
-
-				if !elf_header.from_s(rawdata)
-					raise ElfHeaderError, "Couldn't parse ELF Header", caller
-				end
-			end
-
-			unless [ ELFDATA2LSB, ELFDATA2MSB ].include?(
-			elf_header.v['e_ident'][EI_DATA,1].unpack('C')[0])
-				raise ElfHeaderError, "Invalid data encoding", caller
-			end
-
-			# Identify the file as an ELF object file
-			unless elf_header.v['e_ident'][EI_MAG0, 4] == ELFMAG
-				raise ElfHeaderError, 'Invalid magic number', caller
-			end
-
-			self.struct = elf_header
-		end
-
-		def e_ident
-			struct.v['e_ident']
-		end
-
-	end
-
-
-	# Program Header
-
-	PROGRAM_HEADER_SIZE = 32
-
-	ELF32_PHDR_LSB = Rex::Struct2::CStructTemplate.new(
-		[ 'uint32v', 'p_type',   0 ],
-		[ 'uint32v', 'p_offset', 0 ],
-		[ 'uint32v', 'p_vaddr',  0 ],
-		[ 'uint32v', 'p_paddr',  0 ],
-		[ 'uint32v', 'p_filesz', 0 ],
-		[ 'uint32v', 'p_memsz',  0 ],
-		[ 'uint32v', 'p_flags',  0 ],
-		[ 'uint32v', 'p_align',  0 ]
-	)
-
-	ELF32_PHDR_MSB = Rex::Struct2::CStructTemplate.new(
-		[ 'uint32n', 'p_type',   0 ],
-		[ 'uint32n', 'p_offset', 0 ],
-		[ 'uint32n', 'p_vaddr',  0 ],
-		[ 'uint32n', 'p_paddr',  0 ],
-		[ 'uint32n', 'p_filesz', 0 ],
-		[ 'uint32n', 'p_memsz',  0 ],
-		[ 'uint32n', 'p_flags',  0 ],
-		[ 'uint32n', 'p_align',  0 ]
-	)
-
-	#
-	# p_type  This member tells what kind of segment this array element
-	# describes or how to interpret the array element's information.
-	#
-
-	# Segment Types
-
-	PT_NULL    = 0
-	PT_LOAD    = 1
-	PT_DYNAMIC = 2
-	PT_INTERP  = 3
-	PT_NOTE    = 4
-	PT_SHLIB   = 5
-	PT_PHDR    = 6
-	PT_LOPROC  = 0x70000000
-	PT_HIPROC  = 0x7fffffff
-
-	class ProgramHeader < GenericHeader
-		def initialize(rawdata, ei_data)
-			# Identify the data encoding and parse Program Header
-			if ei_data == ELFDATA2LSB
-				program_header = ELF32_PHDR_LSB.make_struct
-			elsif ei_data == ELFDATA2MSB
-				program_header = ELF32_PHDR_MSB.make_struct
-			else
-				raise ElfHeaderError, "Invalid data encoding", caller
-			end
-
-			if !program_header.from_s(rawdata)
-				raise ProgramHeaderError, "Couldn't parse Program Header", caller
-			end
-
-			self.struct = program_header
-		end
-
-	end
-
-end
-end
-end