grpc 1.50.0-x86_64-linux → 1.52.0.pre2-x86_64-linux

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/ec/internal.h

@@ -1,772 +0,0 @@
-/* Originally written by Bodo Moeller for the OpenSSL project.
- * ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#ifndef OPENSSL_HEADER_EC_INTERNAL_H
-#define OPENSSL_HEADER_EC_INTERNAL_H
-
-#include <openssl/base.h>
-
-#include <openssl/bn.h>
-#include <openssl/ec.h>
-#include <openssl/ex_data.h>
-#include <openssl/type_check.h>
-
-#include "../bn/internal.h"
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-// EC internals.
-
-
-// Cap the size of all field elements and scalars, including custom curves, to
-// 66 bytes, large enough to fit secp521r1 and brainpoolP512r1, which appear to
-// be the largest fields anyone plausibly uses.
-#define EC_MAX_BYTES 66
-#define EC_MAX_WORDS ((EC_MAX_BYTES + BN_BYTES - 1) / BN_BYTES)
-
-OPENSSL_STATIC_ASSERT(EC_MAX_WORDS <= BN_SMALL_MAX_WORDS,
-                      "bn_*_small functions not usable");
-
-
-// Scalars.
-
-// An EC_SCALAR is an integer fully reduced modulo the order. Only the first
-// |order->width| words are used. An |EC_SCALAR| is specific to an |EC_GROUP|
-// and must not be mixed between groups.
-typedef union {
-  // bytes is the representation of the scalar in little-endian order.
-  uint8_t bytes[EC_MAX_BYTES];
-  BN_ULONG words[EC_MAX_WORDS];
-} EC_SCALAR;
-
-// ec_bignum_to_scalar converts |in| to an |EC_SCALAR| and writes it to
-// |*out|. It returns one on success and zero if |in| is out of range.
-OPENSSL_EXPORT int ec_bignum_to_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                       const BIGNUM *in);
-
-// ec_scalar_to_bytes serializes |in| as a big-endian bytestring to |out| and
-// sets |*out_len| to the number of bytes written. The number of bytes written
-// is |BN_num_bytes(&group->order)|, which is at most |EC_MAX_BYTES|.
-OPENSSL_EXPORT void ec_scalar_to_bytes(const EC_GROUP *group, uint8_t *out,
-                                       size_t *out_len, const EC_SCALAR *in);
-
-// ec_scalar_from_bytes deserializes |in| and stores the resulting scalar over
-// group |group| to |out|. It returns one on success and zero if |in| is
-// invalid.
-int ec_scalar_from_bytes(const EC_GROUP *group, EC_SCALAR *out,
-                         const uint8_t *in, size_t len);
-
-// ec_scalar_reduce sets |out| to |words|, reduced modulo the group order.
-// |words| must be less than order^2. |num| must be at most twice the width of
-// group order. This function treats |words| as secret.
-void ec_scalar_reduce(const EC_GROUP *group, EC_SCALAR *out,
-                      const BN_ULONG *words, size_t num);
-
-// ec_random_nonzero_scalar sets |out| to a uniformly selected random value from
-// 1 to |group->order| - 1. It returns one on success and zero on error.
-int ec_random_nonzero_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                             const uint8_t additional_data[32]);
-
-// ec_scalar_equal_vartime returns one if |a| and |b| are equal and zero
-// otherwise. Both values are treated as public.
-int ec_scalar_equal_vartime(const EC_GROUP *group, const EC_SCALAR *a,
-                            const EC_SCALAR *b);
-
-// ec_scalar_is_zero returns one if |a| is zero and zero otherwise.
-int ec_scalar_is_zero(const EC_GROUP *group, const EC_SCALAR *a);
-
-// ec_scalar_add sets |r| to |a| + |b|.
-void ec_scalar_add(const EC_GROUP *group, EC_SCALAR *r, const EC_SCALAR *a,
-                   const EC_SCALAR *b);
-
-// ec_scalar_sub sets |r| to |a| - |b|.
-void ec_scalar_sub(const EC_GROUP *group, EC_SCALAR *r, const EC_SCALAR *a,
-                   const EC_SCALAR *b);
-
-// ec_scalar_neg sets |r| to -|a|.
-void ec_scalar_neg(const EC_GROUP *group, EC_SCALAR *r, const EC_SCALAR *a);
-
-// ec_scalar_to_montgomery sets |r| to |a| in Montgomery form.
-void ec_scalar_to_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                             const EC_SCALAR *a);
-
-// ec_scalar_to_montgomery sets |r| to |a| converted from Montgomery form.
-void ec_scalar_from_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                               const EC_SCALAR *a);
-
-// ec_scalar_mul_montgomery sets |r| to |a| * |b| where inputs and outputs are
-// in Montgomery form.
-void ec_scalar_mul_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                              const EC_SCALAR *a, const EC_SCALAR *b);
-
-// ec_scalar_inv0_montgomery sets |r| to |a|^-1 where inputs and outputs are in
-// Montgomery form. If |a| is zero, |r| is set to zero.
-void ec_scalar_inv0_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                               const EC_SCALAR *a);
-
-// ec_scalar_to_montgomery_inv_vartime sets |r| to |a|^-1 R. That is, it takes
-// in |a| not in Montgomery form and computes the inverse in Montgomery form. It
-// returns one on success and zero if |a| has no inverse. This function assumes
-// |a| is public and may leak information about it via timing.
-//
-// Note this is not the same operation as |ec_scalar_inv0_montgomery|.
-int ec_scalar_to_montgomery_inv_vartime(const EC_GROUP *group, EC_SCALAR *r,
-                                        const EC_SCALAR *a);
-
-// ec_scalar_select, in constant time, sets |out| to |a| if |mask| is all ones
-// and |b| if |mask| is all zeros.
-void ec_scalar_select(const EC_GROUP *group, EC_SCALAR *out, BN_ULONG mask,
-                      const EC_SCALAR *a, const EC_SCALAR *b);
-
-
-// Field elements.
-
-// An EC_FELEM represents a field element. Only the first |field->width| words
-// are used. An |EC_FELEM| is specific to an |EC_GROUP| and must not be mixed
-// between groups. Additionally, the representation (whether or not elements are
-// represented in Montgomery-form) may vary between |EC_METHOD|s.
-typedef union {
-  // bytes is the representation of the field element in little-endian order.
-  uint8_t bytes[EC_MAX_BYTES];
-  BN_ULONG words[EC_MAX_WORDS];
-} EC_FELEM;
-
-// ec_bignum_to_felem converts |in| to an |EC_FELEM|. It returns one on success
-// and zero if |in| is out of range.
-int ec_bignum_to_felem(const EC_GROUP *group, EC_FELEM *out, const BIGNUM *in);
-
-// ec_felem_to_bignum converts |in| to a |BIGNUM|. It returns one on success and
-// zero on allocation failure.
-int ec_felem_to_bignum(const EC_GROUP *group, BIGNUM *out, const EC_FELEM *in);
-
-// ec_felem_to_bytes serializes |in| as a big-endian bytestring to |out| and
-// sets |*out_len| to the number of bytes written. The number of bytes written
-// is |BN_num_bytes(&group->order)|, which is at most |EC_MAX_BYTES|.
-void ec_felem_to_bytes(const EC_GROUP *group, uint8_t *out, size_t *out_len,
-                       const EC_FELEM *in);
-
-// ec_felem_from_bytes deserializes |in| and stores the resulting field element
-// to |out|. It returns one on success and zero if |in| is invalid.
-int ec_felem_from_bytes(const EC_GROUP *group, EC_FELEM *out, const uint8_t *in,
-                        size_t len);
-
-// ec_felem_neg sets |out| to -|a|.
-void ec_felem_neg(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a);
-
-// ec_felem_add sets |out| to |a| + |b|.
-void ec_felem_add(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                  const EC_FELEM *b);
-
-// ec_felem_add sets |out| to |a| - |b|.
-void ec_felem_sub(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                  const EC_FELEM *b);
-
-// ec_felem_non_zero_mask returns all ones if |a| is non-zero and all zeros
-// otherwise.
-BN_ULONG ec_felem_non_zero_mask(const EC_GROUP *group, const EC_FELEM *a);
-
-// ec_felem_select, in constant time, sets |out| to |a| if |mask| is all ones
-// and |b| if |mask| is all zeros.
-void ec_felem_select(const EC_GROUP *group, EC_FELEM *out, BN_ULONG mask,
-                     const EC_FELEM *a, const EC_FELEM *b);
-
-// ec_felem_equal returns one if |a| and |b| are equal and zero otherwise.
-int ec_felem_equal(const EC_GROUP *group, const EC_FELEM *a, const EC_FELEM *b);
-
-
-// Points.
-//
-// Points may represented in affine coordinates as |EC_AFFINE| or Jacobian
-// coordinates as |EC_RAW_POINT|. Affine coordinates directly represent a
-// point on the curve, but point addition over affine coordinates requires
-// costly field inversions, so arithmetic is done in Jacobian coordinates.
-// Converting from affine to Jacobian is cheap, while converting from Jacobian
-// to affine costs a field inversion. (Jacobian coordinates amortize the field
-// inversions needed in a sequence of point operations.)
-//
-// TODO(davidben): Rename |EC_RAW_POINT| to |EC_JACOBIAN|.
-
-// An EC_RAW_POINT represents an elliptic curve point in Jacobian coordinates.
-// Unlike |EC_POINT|, it is a plain struct which can be stack-allocated and
-// needs no cleanup. It is specific to an |EC_GROUP| and must not be mixed
-// between groups.
-typedef struct {
-  // X, Y, and Z are Jacobian projective coordinates. They represent
-  // (X/Z^2, Y/Z^3) if Z != 0 and the point at infinity otherwise.
-  EC_FELEM X, Y, Z;
-} EC_RAW_POINT;
-
-// An EC_AFFINE represents an elliptic curve point in affine coordinates.
-// coordinates. Note the point at infinity cannot be represented in affine
-// coordinates.
-typedef struct {
-  EC_FELEM X, Y;
-} EC_AFFINE;
-
-// ec_affine_to_jacobian converts |p| to Jacobian form and writes the result to
-// |*out|. This operation is very cheap and only costs a few copies.
-void ec_affine_to_jacobian(const EC_GROUP *group, EC_RAW_POINT *out,
-                           const EC_AFFINE *p);
-
-// ec_jacobian_to_affine converts |p| to affine form and writes the result to
-// |*out|. It returns one on success and zero if |p| was the point at infinity.
-// This operation performs a field inversion and should only be done once per
-// point.
-//
-// If only extracting the x-coordinate, use |ec_get_x_coordinate_*| which is
-// slightly faster.
-int ec_jacobian_to_affine(const EC_GROUP *group, EC_AFFINE *out,
-                          const EC_RAW_POINT *p);
-
-// ec_jacobian_to_affine_batch converts |num| points in |in| from Jacobian
-// coordinates to affine coordinates and writes the results to |out|. It returns
-// one on success and zero if any of the input points were infinity.
-//
-// This function is not implemented for all curves. Add implementations as
-// needed.
-int ec_jacobian_to_affine_batch(const EC_GROUP *group, EC_AFFINE *out,
-                                const EC_RAW_POINT *in, size_t num);
-
-// ec_point_set_affine_coordinates sets |out|'s to a point with affine
-// coordinates |x| and |y|. It returns one if the point is on the curve and
-// zero otherwise. If the point is not on the curve, the value of |out| is
-// undefined.
-int ec_point_set_affine_coordinates(const EC_GROUP *group, EC_AFFINE *out,
-                                    const EC_FELEM *x, const EC_FELEM *y);
-
-// ec_point_mul_scalar sets |r| to |p| * |scalar|. Both inputs are considered
-// secret.
-int ec_point_mul_scalar(const EC_GROUP *group, EC_RAW_POINT *r,
-                        const EC_RAW_POINT *p, const EC_SCALAR *scalar);
-
-// ec_point_mul_scalar_base sets |r| to generator * |scalar|. |scalar| is
-// treated as secret.
-int ec_point_mul_scalar_base(const EC_GROUP *group, EC_RAW_POINT *r,
-                             const EC_SCALAR *scalar);
-
-// ec_point_mul_scalar_batch sets |r| to |p0| * |scalar0| + |p1| * |scalar1| +
-// |p2| * |scalar2|. |p2| may be NULL to skip that term.
-//
-// The inputs are treated as secret, however, this function leaks information
-// about whether intermediate computations add a point to itself. Callers must
-// ensure that discrete logs between |p0|, |p1|, and |p2| are uniformly
-// distributed and independent of the scalars, which should be uniformly
-// selected and not under the attackers control. This ensures the doubling case
-// will occur with negligible probability.
-//
-// This function is not implemented for all curves. Add implementations as
-// needed.
-//
-// TODO(davidben): This function does not use base point tables. For now, it is
-// only used with the generic |EC_GFp_mont_method| implementation which has
-// none. If generalizing to tuned curves, this may be useful. However, we still
-// must double up to the least efficient input, so precomputed tables can only
-// save table setup and allow a wider window size.
-int ec_point_mul_scalar_batch(const EC_GROUP *group, EC_RAW_POINT *r,
-                              const EC_RAW_POINT *p0, const EC_SCALAR *scalar0,
-                              const EC_RAW_POINT *p1, const EC_SCALAR *scalar1,
-                              const EC_RAW_POINT *p2, const EC_SCALAR *scalar2);
-
-#define EC_MONT_PRECOMP_COMB_SIZE 5
-
-// An |EC_PRECOMP| stores precomputed information about a point, to optimize
-// repeated multiplications involving it. It is a union so different
-// |EC_METHOD|s can store different information in it.
-typedef union {
-  EC_AFFINE comb[(1 << EC_MONT_PRECOMP_COMB_SIZE) - 1];
-} EC_PRECOMP;
-
-// ec_init_precomp precomputes multiples of |p| and writes the result to |out|.
-// It returns one on success and zero on error. The resulting table may be used
-// with |ec_point_mul_scalar_precomp|. This function will fail if |p| is the
-// point at infinity.
-//
-// This function is not implemented for all curves. Add implementations as
-// needed.
-int ec_init_precomp(const EC_GROUP *group, EC_PRECOMP *out,
-                    const EC_RAW_POINT *p);
-
-// ec_point_mul_scalar_precomp sets |r| to |p0| * |scalar0| + |p1| * |scalar1| +
-// |p2| * |scalar2|. |p1| or |p2| may be NULL to skip the corresponding term.
-// The points are represented as |EC_PRECOMP| and must be initialized with
-// |ec_init_precomp|. This function runs faster than |ec_point_mul_scalar_batch|
-// but requires setup work per input point, so it is only appropriate for points
-// which are used frequently.
-//
-// The inputs are treated as secret, however, this function leaks information
-// about whether intermediate computations add a point to itself. Callers must
-// ensure that discrete logs between |p0|, |p1|, and |p2| are uniformly
-// distributed and independent of the scalars, which should be uniformly
-// selected and not under the attackers control. This ensures the doubling case
-// will occur with negligible probability.
-//
-// This function is not implemented for all curves. Add implementations as
-// needed.
-//
-// TODO(davidben): This function does not use base point tables. For now, it is
-// only used with the generic |EC_GFp_mont_method| implementation which has
-// none. If generalizing to tuned curves, we should add a parameter for the base
-// point and arrange for the generic implementation to have base point tables
-// available.
-int ec_point_mul_scalar_precomp(const EC_GROUP *group, EC_RAW_POINT *r,
-                                const EC_PRECOMP *p0, const EC_SCALAR *scalar0,
-                                const EC_PRECOMP *p1, const EC_SCALAR *scalar1,
-                                const EC_PRECOMP *p2, const EC_SCALAR *scalar2);
-
-// ec_point_mul_scalar_public sets |r| to
-// generator * |g_scalar| + |p| * |p_scalar|. It assumes that the inputs are
-// public so there is no concern about leaking their values through timing.
-OPENSSL_EXPORT int ec_point_mul_scalar_public(const EC_GROUP *group,
-                                              EC_RAW_POINT *r,
-                                              const EC_SCALAR *g_scalar,
-                                              const EC_RAW_POINT *p,
-                                              const EC_SCALAR *p_scalar);
-
-// ec_point_mul_scalar_public_batch sets |r| to the sum of generator *
-// |g_scalar| and |points[i]| * |scalars[i]| where |points| and |scalars| have
-// |num| elements. It assumes that the inputs are public so there is no concern
-// about leaking their values through timing. |g_scalar| may be NULL to skip
-// that term.
-//
-// This function is not implemented for all curves. Add implementations as
-// needed.
-int ec_point_mul_scalar_public_batch(const EC_GROUP *group, EC_RAW_POINT *r,
-                                     const EC_SCALAR *g_scalar,
-                                     const EC_RAW_POINT *points,
-                                     const EC_SCALAR *scalars, size_t num);
-
-// ec_point_select, in constant time, sets |out| to |a| if |mask| is all ones
-// and |b| if |mask| is all zeros.
-void ec_point_select(const EC_GROUP *group, EC_RAW_POINT *out, BN_ULONG mask,
-                     const EC_RAW_POINT *a, const EC_RAW_POINT *b);
-
-// ec_affine_select behaves like |ec_point_select| but acts on affine points.
-void ec_affine_select(const EC_GROUP *group, EC_AFFINE *out, BN_ULONG mask,
-                      const EC_AFFINE *a, const EC_AFFINE *b);
-
-// ec_precomp_select behaves like |ec_point_select| but acts on |EC_PRECOMP|.
-void ec_precomp_select(const EC_GROUP *group, EC_PRECOMP *out, BN_ULONG mask,
-                       const EC_PRECOMP *a, const EC_PRECOMP *b);
-
-// ec_cmp_x_coordinate compares the x (affine) coordinate of |p|, mod the group
-// order, with |r|. It returns one if the values match and zero if |p| is the
-// point at infinity of the values do not match.
-int ec_cmp_x_coordinate(const EC_GROUP *group, const EC_RAW_POINT *p,
-                        const EC_SCALAR *r);
-
-// ec_get_x_coordinate_as_scalar sets |*out| to |p|'s x-coordinate, modulo
-// |group->order|. It returns one on success and zero if |p| is the point at
-// infinity.
-int ec_get_x_coordinate_as_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                  const EC_RAW_POINT *p);
-
-// ec_get_x_coordinate_as_bytes writes |p|'s affine x-coordinate to |out|, which
-// must have at must |max_out| bytes. It sets |*out_len| to the number of bytes
-// written. The value is written big-endian and zero-padded to the size of the
-// field. This function returns one on success and zero on failure.
-int ec_get_x_coordinate_as_bytes(const EC_GROUP *group, uint8_t *out,
-                                 size_t *out_len, size_t max_out,
-                                 const EC_RAW_POINT *p);
-
-// ec_point_to_bytes behaves like |EC_POINT_point2oct| but takes an
-// |EC_AFFINE|.
-size_t ec_point_to_bytes(const EC_GROUP *group, const EC_AFFINE *point,
-                         point_conversion_form_t form, uint8_t *buf,
-                         size_t len);
-
-// ec_point_from_uncompressed parses |in| as a point in uncompressed form and
-// sets the result to |out|. It returns one on success and zero if the input was
-// invalid.
-int ec_point_from_uncompressed(const EC_GROUP *group, EC_AFFINE *out,
-                               const uint8_t *in, size_t len);
-
-// ec_set_to_safe_point sets |out| to an arbitrary point on |group|, either the
-// generator or the point at infinity. This is used to guard against callers of
-// external APIs not checking the return value.
-void ec_set_to_safe_point(const EC_GROUP *group, EC_RAW_POINT *out);
-
-// ec_affine_jacobian_equal returns one if |a| and |b| represent the same point
-// and zero otherwise. It treats both inputs as secret.
-int ec_affine_jacobian_equal(const EC_GROUP *group, const EC_AFFINE *a,
-                             const EC_RAW_POINT *b);
-
-
-// Implementation details.
-
-struct ec_method_st {
-  int (*group_init)(EC_GROUP *);
-  void (*group_finish)(EC_GROUP *);
-  int (*group_set_curve)(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                         const BIGNUM *b, BN_CTX *);
-
-  // point_get_affine_coordinates sets |*x| and |*y| to the affine coordinates
-  // of |p|. Either |x| or |y| may be NULL to omit it. It returns one on success
-  // and zero if |p| is the point at infinity.
-  int (*point_get_affine_coordinates)(const EC_GROUP *, const EC_RAW_POINT *p,
-                                      EC_FELEM *x, EC_FELEM *y);
-
-  // jacobian_to_affine_batch implements |ec_jacobian_to_affine_batch|.
-  int (*jacobian_to_affine_batch)(const EC_GROUP *group, EC_AFFINE *out,
-                                  const EC_RAW_POINT *in, size_t num);
-
-  // add sets |r| to |a| + |b|.
-  void (*add)(const EC_GROUP *group, EC_RAW_POINT *r, const EC_RAW_POINT *a,
-              const EC_RAW_POINT *b);
-  // dbl sets |r| to |a| + |a|.
-  void (*dbl)(const EC_GROUP *group, EC_RAW_POINT *r, const EC_RAW_POINT *a);
-
-  // mul sets |r| to |scalar|*|p|.
-  void (*mul)(const EC_GROUP *group, EC_RAW_POINT *r, const EC_RAW_POINT *p,
-              const EC_SCALAR *scalar);
-  // mul_base sets |r| to |scalar|*generator.
-  void (*mul_base)(const EC_GROUP *group, EC_RAW_POINT *r,
-                   const EC_SCALAR *scalar);
-  // mul_batch implements |ec_mul_scalar_batch|.
-  void (*mul_batch)(const EC_GROUP *group, EC_RAW_POINT *r,
-                    const EC_RAW_POINT *p0, const EC_SCALAR *scalar0,
-                    const EC_RAW_POINT *p1, const EC_SCALAR *scalar1,
-                    const EC_RAW_POINT *p2, const EC_SCALAR *scalar2);
-  // mul_public sets |r| to |g_scalar|*generator + |p_scalar|*|p|. It assumes
-  // that the inputs are public so there is no concern about leaking their
-  // values through timing.
-  //
-  // This function may be omitted if |mul_public_batch| is provided.
-  void (*mul_public)(const EC_GROUP *group, EC_RAW_POINT *r,
-                     const EC_SCALAR *g_scalar, const EC_RAW_POINT *p,
-                     const EC_SCALAR *p_scalar);
-  // mul_public_batch implements |ec_point_mul_scalar_public_batch|.
-  int (*mul_public_batch)(const EC_GROUP *group, EC_RAW_POINT *r,
-                          const EC_SCALAR *g_scalar, const EC_RAW_POINT *points,
-                          const EC_SCALAR *scalars, size_t num);
-
-  // init_precomp implements |ec_init_precomp|.
-  int (*init_precomp)(const EC_GROUP *group, EC_PRECOMP *out,
-                      const EC_RAW_POINT *p);
-  // mul_precomp implements |ec_point_mul_scalar_precomp|.
-  void (*mul_precomp)(const EC_GROUP *group, EC_RAW_POINT *r,
-                      const EC_PRECOMP *p0, const EC_SCALAR *scalar0,
-                      const EC_PRECOMP *p1, const EC_SCALAR *scalar1,
-                      const EC_PRECOMP *p2, const EC_SCALAR *scalar2);
-
-  // felem_mul and felem_sqr implement multiplication and squaring,
-  // respectively, so that the generic |EC_POINT_add| and |EC_POINT_dbl|
-  // implementations can work both with |EC_GFp_mont_method| and the tuned
-  // operations.
-  //
-  // TODO(davidben): This constrains |EC_FELEM|'s internal representation, adds
-  // many indirect calls in the middle of the generic code, and a bunch of
-  // conversions. If p224-64.c were easily convertable to Montgomery form, we
-  // could say |EC_FELEM| is always in Montgomery form. If we routed the rest of
-  // simple.c to |EC_METHOD|, we could give |EC_POINT| an |EC_METHOD|-specific
-  // representation and say |EC_FELEM| is purely a |EC_GFp_mont_method| type.
-  void (*felem_mul)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
-                    const EC_FELEM *b);
-  void (*felem_sqr)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a);
-
-  void (*felem_to_bytes)(const EC_GROUP *group, uint8_t *out, size_t *out_len,
-                         const EC_FELEM *in);
-  int (*felem_from_bytes)(const EC_GROUP *group, EC_FELEM *out,
-                          const uint8_t *in, size_t len);
-
-  // felem_reduce sets |out| to |words|, reduced modulo the field size, p.
-  // |words| must be less than p^2. |num| must be at most twice the width of p.
-  // This function treats |words| as secret.
-  //
-  // This function is only used in hash-to-curve and may be omitted in curves
-  // that do not support it.
-  void (*felem_reduce)(const EC_GROUP *group, EC_FELEM *out,
-                       const BN_ULONG *words, size_t num);
-
-  // felem_exp sets |out| to |a|^|exp|. It treats |a| is secret but |exp| as
-  // public.
-  //
-  // This function is used in hash-to-curve and may be NULL in curves not used
-  // with hash-to-curve.
-  void (*felem_exp)(const EC_GROUP *group, EC_FELEM *out, const EC_FELEM *a,
-                    const BN_ULONG *exp, size_t num_exp);
-
-  // scalar_inv0_montgomery implements |ec_scalar_inv0_montgomery|.
-  void (*scalar_inv0_montgomery)(const EC_GROUP *group, EC_SCALAR *out,
-                                 const EC_SCALAR *in);
-
-  // scalar_to_montgomery_inv_vartime implements
-  // |ec_scalar_to_montgomery_inv_vartime|.
-  int (*scalar_to_montgomery_inv_vartime)(const EC_GROUP *group, EC_SCALAR *out,
-                                          const EC_SCALAR *in);
-
-  // cmp_x_coordinate compares the x (affine) coordinate of |p|, mod the group
-  // order, with |r|. It returns one if the values match and zero if |p| is the
-  // point at infinity of the values do not match.
-  int (*cmp_x_coordinate)(const EC_GROUP *group, const EC_RAW_POINT *p,
-                          const EC_SCALAR *r);
-} /* EC_METHOD */;
-
-const EC_METHOD *EC_GFp_mont_method(void);
-
-struct ec_group_st {
-  const EC_METHOD *meth;
-
-  // Unlike all other |EC_POINT|s, |generator| does not own |generator->group|
-  // to avoid a reference cycle. Additionally, Z is guaranteed to be one, so X
-  // and Y are suitable for use as an |EC_AFFINE|.
-  EC_POINT *generator;
-  BIGNUM order;
-
-  int curve_name;  // optional NID for named curve
-
-  BN_MONT_CTX *order_mont;  // data for ECDSA inverse
-
-  // The following members are handled by the method functions,
-  // even if they appear generic
-
-  BIGNUM field;  // For curves over GF(p), this is the modulus.
-
-  EC_FELEM a, b;  // Curve coefficients.
-
-  // a_is_minus3 is one if |a| is -3 mod |field| and zero otherwise. Point
-  // arithmetic is optimized for -3.
-  int a_is_minus3;
-
-  // field_greater_than_order is one if |field| is greate than |order| and zero
-  // otherwise.
-  int field_greater_than_order;
-
-  // field_minus_order, if |field_greater_than_order| is true, is |field| minus
-  // |order| represented as an |EC_FELEM|. Otherwise, it is zero.
-  //
-  // Note: unlike |EC_FELEM|s used as intermediate values internal to the
-  // |EC_METHOD|, this value is not encoded in Montgomery form.
-  EC_FELEM field_minus_order;
-
-  CRYPTO_refcount_t references;
-
-  BN_MONT_CTX *mont;  // Montgomery structure.
-
-  EC_FELEM one;  // The value one.
-} /* EC_GROUP */;
-
-struct ec_point_st {
-  // group is an owning reference to |group|, unless this is
-  // |group->generator|.
-  EC_GROUP *group;
-  // raw is the group-specific point data. Functions that take |EC_POINT|
-  // typically check consistency with |EC_GROUP| while functions that take
-  // |EC_RAW_POINT| do not. Thus accesses to this field should be externally
-  // checked for consistency.
-  EC_RAW_POINT raw;
-} /* EC_POINT */;
-
-EC_GROUP *ec_group_new(const EC_METHOD *meth);
-
-void ec_GFp_mont_mul(const EC_GROUP *group, EC_RAW_POINT *r,
-                     const EC_RAW_POINT *p, const EC_SCALAR *scalar);
-void ec_GFp_mont_mul_base(const EC_GROUP *group, EC_RAW_POINT *r,
-                          const EC_SCALAR *scalar);
-void ec_GFp_mont_mul_batch(const EC_GROUP *group, EC_RAW_POINT *r,
-                           const EC_RAW_POINT *p0, const EC_SCALAR *scalar0,
-                           const EC_RAW_POINT *p1, const EC_SCALAR *scalar1,
-                           const EC_RAW_POINT *p2, const EC_SCALAR *scalar2);
-int ec_GFp_mont_init_precomp(const EC_GROUP *group, EC_PRECOMP *out,
-                             const EC_RAW_POINT *p);
-void ec_GFp_mont_mul_precomp(const EC_GROUP *group, EC_RAW_POINT *r,
-                             const EC_PRECOMP *p0, const EC_SCALAR *scalar0,
-                             const EC_PRECOMP *p1, const EC_SCALAR *scalar1,
-                             const EC_PRECOMP *p2, const EC_SCALAR *scalar2);
-
-// ec_compute_wNAF writes the modified width-(w+1) Non-Adjacent Form (wNAF) of
-// |scalar| to |out|. |out| must have room for |bits| + 1 elements, each of
-// which will be either zero or odd with an absolute value less than  2^w
-// satisfying
-//     scalar = \sum_j out[j]*2^j
-// where at most one of any  w+1  consecutive digits is non-zero
-// with the exception that the most significant digit may be only
-// w-1 zeros away from that next non-zero digit.
-void ec_compute_wNAF(const EC_GROUP *group, int8_t *out,
-                     const EC_SCALAR *scalar, size_t bits, int w);
-
-int ec_GFp_mont_mul_public_batch(const EC_GROUP *group, EC_RAW_POINT *r,
-                                 const EC_SCALAR *g_scalar,
-                                 const EC_RAW_POINT *points,
-                                 const EC_SCALAR *scalars, size_t num);
-
-// method functions in simple.c
-int ec_GFp_simple_group_init(EC_GROUP *);
-void ec_GFp_simple_group_finish(EC_GROUP *);
-int ec_GFp_simple_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                                  const BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_group_get_curve(const EC_GROUP *, BIGNUM *p, BIGNUM *a,
-                                  BIGNUM *b);
-void ec_GFp_simple_point_init(EC_RAW_POINT *);
-void ec_GFp_simple_point_copy(EC_RAW_POINT *, const EC_RAW_POINT *);
-void ec_GFp_simple_point_set_to_infinity(const EC_GROUP *, EC_RAW_POINT *);
-void ec_GFp_mont_add(const EC_GROUP *, EC_RAW_POINT *r, const EC_RAW_POINT *a,
-                     const EC_RAW_POINT *b);
-void ec_GFp_mont_dbl(const EC_GROUP *, EC_RAW_POINT *r, const EC_RAW_POINT *a);
-void ec_GFp_simple_invert(const EC_GROUP *, EC_RAW_POINT *);
-int ec_GFp_simple_is_at_infinity(const EC_GROUP *, const EC_RAW_POINT *);
-int ec_GFp_simple_is_on_curve(const EC_GROUP *, const EC_RAW_POINT *);
-int ec_GFp_simple_points_equal(const EC_GROUP *, const EC_RAW_POINT *a,
-                               const EC_RAW_POINT *b);
-void ec_simple_scalar_inv0_montgomery(const EC_GROUP *group, EC_SCALAR *r,
-                                      const EC_SCALAR *a);
-
-int ec_simple_scalar_to_montgomery_inv_vartime(const EC_GROUP *group,
-                                               EC_SCALAR *r,
-                                               const EC_SCALAR *a);
-
-int ec_GFp_simple_cmp_x_coordinate(const EC_GROUP *group, const EC_RAW_POINT *p,
-                                   const EC_SCALAR *r);
-
-void ec_GFp_simple_felem_to_bytes(const EC_GROUP *group, uint8_t *out,
-                                  size_t *out_len, const EC_FELEM *in);
-int ec_GFp_simple_felem_from_bytes(const EC_GROUP *group, EC_FELEM *out,
-                                   const uint8_t *in, size_t len);
-
-// method functions in montgomery.c
-int ec_GFp_mont_group_init(EC_GROUP *);
-int ec_GFp_mont_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                                const BIGNUM *b, BN_CTX *);
-void ec_GFp_mont_group_finish(EC_GROUP *);
-void ec_GFp_mont_felem_mul(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
-                           const EC_FELEM *b);
-void ec_GFp_mont_felem_sqr(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a);
-
-void ec_GFp_mont_felem_to_bytes(const EC_GROUP *group, uint8_t *out,
-                                size_t *out_len, const EC_FELEM *in);
-int ec_GFp_mont_felem_from_bytes(const EC_GROUP *group, EC_FELEM *out,
-                                 const uint8_t *in, size_t len);
-
-void ec_GFp_nistp_recode_scalar_bits(crypto_word_t *sign, crypto_word_t *digit,
-                                     crypto_word_t in);
-
-const EC_METHOD *EC_GFp_nistp224_method(void);
-const EC_METHOD *EC_GFp_nistp256_method(void);
-
-// EC_GFp_nistz256_method is a GFp method using montgomery multiplication, with
-// x86-64 optimized P256. See http://eprint.iacr.org/2013/816.
-const EC_METHOD *EC_GFp_nistz256_method(void);
-
-// An EC_WRAPPED_SCALAR is an |EC_SCALAR| with a parallel |BIGNUM|
-// representation. It exists to support the |EC_KEY_get0_private_key| API.
-typedef struct {
-  BIGNUM bignum;
-  EC_SCALAR scalar;
-} EC_WRAPPED_SCALAR;
-
-struct ec_key_st {
-  EC_GROUP *group;
-
-  // Ideally |pub_key| would be an |EC_AFFINE| so serializing it does not pay an
-  // inversion each time, but the |EC_KEY_get0_public_key| API implies public
-  // keys are stored in an |EC_POINT|-compatible form.
-  EC_POINT *pub_key;
-  EC_WRAPPED_SCALAR *priv_key;
-
-  unsigned int enc_flag;
-  point_conversion_form_t conv_form;
-
-  CRYPTO_refcount_t references;
-
-  ECDSA_METHOD *ecdsa_meth;
-
-  CRYPTO_EX_DATA ex_data;
-} /* EC_KEY */;
-
-struct built_in_curve {
-  int nid;
-  const uint8_t *oid;
-  uint8_t oid_len;
-  // comment is a human-readable string describing the curve.
-  const char *comment;
-  // param_len is the number of bytes needed to store a field element.
-  uint8_t param_len;
-  // params points to an array of 6*|param_len| bytes which hold the field
-  // elements of the following (in big-endian order): prime, a, b, generator x,
-  // generator y, order.
-  const uint8_t *params;
-  const EC_METHOD *method;
-};
-
-#define OPENSSL_NUM_BUILT_IN_CURVES 4
-
-struct built_in_curves {
-  struct built_in_curve curves[OPENSSL_NUM_BUILT_IN_CURVES];
-};
-
-// OPENSSL_built_in_curves returns a pointer to static information about
-// standard curves. The array is terminated with an entry where |nid| is
-// |NID_undef|.
-const struct built_in_curves *OPENSSL_built_in_curves(void);
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
-
-#endif  // OPENSSL_HEADER_EC_INTERNAL_H