esruby 0.0.0 → 0.0.2

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/perltest.pl

@@ -1,237 +0,0 @@
-#! /usr/bin/env perl
-
-# Program for testing regular expressions with perl to check that PCRE handles
-# them the same. This version supports /8 for UTF-8 testing. However, it needs
-# to have "use utf8" at the start for running the UTF-8 tests, but *not* for
-# the other tests. The only way I've found for doing this is to cat this line
-# in explicitly in the RunPerlTest script. I've also used this method to supply
-# "require Encode" for the UTF-8 tests, so that the main test will still run
-# where Encode is not installed.
-
-# use locale;  # With this included, \x0b matches \s!
-
-# Function for turning a string into a string of printing chars.
-
-#use utf8;
-#require Encode;
-
-sub pchars {
-my($t) = "";
-
-if ($utf8)
-  {
-  @p = unpack('U*', $_[0]);
-  foreach $c (@p)
-    {
-    if ($c >= 32 && $c < 127) { $t .= chr $c; }
-      else { $t .= sprintf("\\x{%02x}", $c);
-      }
-    }
-  }
-else
-  {
-  foreach $c (split(//, $_[0]))
-    {
-    if (ord $c >= 32 && ord $c < 127) { $t .= $c; }
-      else { $t .= sprintf("\\x%02x", ord $c); }
-    }
-  }
-
-$t;
-}
-
-
-# Read lines from named file or stdin and write to named file or stdout; lines
-# consist of a regular expression, in delimiters and optionally followed by
-# options, followed by a set of test data, terminated by an empty line.
-
-# Sort out the input and output files
-
-if (@ARGV > 0)
-  {
-  open(INFILE, "<$ARGV[0]") || die "Failed to open $ARGV[0]\n";
-  $infile = "INFILE";
-  }
-else { $infile = "STDIN"; }
-
-if (@ARGV > 1)
-  {
-  open(OUTFILE, ">$ARGV[1]") || die "Failed to open $ARGV[1]\n";
-  $outfile = "OUTFILE";
-  }
-else { $outfile = "STDOUT"; }
-
-printf($outfile "Perl $] Regular Expressions\n\n");
-
-# Main loop
-
-NEXT_RE:
-for (;;)
-  {
-  printf "  re> " if $infile eq "STDIN";
-  last if ! ($_ = <$infile>);
-  printf $outfile "$_" if $infile ne "STDIN";
-  next if ($_ eq "");
-
-  $pattern = $_;
-
-  while ($pattern !~ /^\s*(.).*\1/s)
-    {
-    printf "    > " if $infile eq "STDIN";
-    last if ! ($_ = <$infile>);
-    printf $outfile "$_" if $infile ne "STDIN";
-    $pattern .= $_;
-    }
-
-   chomp($pattern);
-   $pattern =~ s/\s+$//;
-
-  # The private /+ modifier means "print $' afterwards".
-
-  $showrest = ($pattern =~ s/\+(?=[a-zA-Z]*$)//);
-
-  # A doubled version is used by pcretest to print remainders after captures
-
-  $pattern =~ s/\+(?=[a-zA-Z]*$)//;
-
-  # Remove /8 from a UTF-8 pattern.
-
-  $utf8 = $pattern =~ s/8(?=[a-zA-Z]*$)//;
-
-  # Remove /J from a pattern with duplicate names.
-
-  $pattern =~ s/J(?=[a-zA-Z]*$)//;
-
-  # Remove /K from a pattern (asks pcretest to check MARK data) */
-
-  $pattern =~ s/K(?=[a-zA-Z]*$)//;
-
-  # Remove /W from a pattern (asks pcretest to set PCRE_UCP)
-
-  $pattern =~ s/W(?=[a-zA-Z]*$)//;
-
-  # Remove /S or /SS from a pattern (asks pcretest to study or not to study)
-
-  $pattern =~ s/S(?=[a-zA-Z]*$)//g;
-
-  # Remove /Y from a pattern (asks pcretest to disable PCRE optimization)
-
-  $pattern =~ s/Y(?=[a-zA-Z]*$)//;
-
-  # Check that the pattern is valid
-
-  eval "\$_ =~ ${pattern}";
-  if ($@)
-    {
-    printf $outfile "Error: $@";
-    next NEXT_RE;
-    }
-
-  # If the /g modifier is present, we want to put a loop round the matching;
-  # otherwise just a single "if".
-
-  $cmd = ($pattern =~ /g[a-z]*$/)? "while" : "if";
-
-  # If the pattern is actually the null string, Perl uses the most recently
-  # executed (and successfully compiled) regex is used instead. This is a
-  # nasty trap for the unwary! The PCRE test suite does contain null strings
-  # in places - if they are allowed through here all sorts of weird and
-  # unexpected effects happen. To avoid this, we replace such patterns with
-  # a non-null pattern that has the same effect.
-
-  $pattern = "/(?#)/$2" if ($pattern =~ /^(.)\1(.*)$/);
-
-  # Read data lines and test them
-
-  for (;;)
-    {
-    printf "data> " if $infile eq "STDIN";
-    last NEXT_RE if ! ($_ = <$infile>);
-    chomp;
-    printf $outfile "$_\n" if $infile ne "STDIN";
-
-    s/\s+$//;  # Remove trailing space
-    s/^\s+//;  # Remove leading space
-    s/\\Y//g;  # Remove \Y (pcretest flag to set PCRE_NO_START_OPTIMIZE)
-
-    last if ($_ eq "");
-    $x = eval "\"$_\"";   # To get escapes processed
-
-    # Empty array for holding results, ensure $REGERROR and $REGMARK are
-    # unset, then do the matching.
-
-    @subs = ();
-
-    $pushes = "push \@subs,\$&;" .
-         "push \@subs,\$1;" .
-         "push \@subs,\$2;" .
-         "push \@subs,\$3;" .
-         "push \@subs,\$4;" .
-         "push \@subs,\$5;" .
-         "push \@subs,\$6;" .
-         "push \@subs,\$7;" .
-         "push \@subs,\$8;" .
-         "push \@subs,\$9;" .
-         "push \@subs,\$10;" .
-         "push \@subs,\$11;" .
-         "push \@subs,\$12;" .
-         "push \@subs,\$13;" .
-         "push \@subs,\$14;" .
-         "push \@subs,\$15;" .
-         "push \@subs,\$16;" .
-         "push \@subs,\$'; }";
-
-    undef $REGERROR;
-    undef $REGMARK;
-
-    eval "${cmd} (\$x =~ ${pattern}) {" . $pushes;
-
-    if ($@)
-      {
-      printf $outfile "Error: $@\n";
-      next NEXT_RE;
-      }
-    elsif (scalar(@subs) == 0)
-      {
-      printf $outfile "No match";
-      if (defined $REGERROR && $REGERROR != 1)
-        { printf $outfile (", mark = %s", &pchars($REGERROR)); }
-      printf $outfile "\n";
-      }
-    else
-      {
-      while (scalar(@subs) != 0)
-        {
-        printf $outfile (" 0: %s\n", &pchars($subs[0]));
-        printf $outfile (" 0+ %s\n", &pchars($subs[17])) if $showrest;
-        $last_printed = 0;
-        for ($i = 1; $i <= 16; $i++)
-          {
-          if (defined $subs[$i])
-            {
-            while ($last_printed++ < $i-1)
-              { printf $outfile ("%2d: <unset>\n", $last_printed); }
-            printf $outfile ("%2d: %s\n", $i, &pchars($subs[$i]));
-            $last_printed = $i;
-            }
-          }
-        splice(@subs, 0, 18);
-        }
-
-      # It seems that $REGMARK is not marked as UTF-8 even when use utf8 is
-      # set and the input pattern was a UTF-8 string. We can, however, force
-      # it to be so marked.
-
-      if (defined $REGMARK && $REGMARK != 1)
-        {
-        $xx = $REGMARK;
-        $xx = Encode::decode_utf8($xx) if $utf8;
-        printf $outfile ("MK: %s\n", &pchars($xx));
-        }
-      }
-    }
-  }
-
-# printf $outfile "\n";
-
-# End

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/sljit/sljitConfig.h

@@ -1,110 +0,0 @@
-/*
- *    Stack-less Just-In-Time compiler
- *
- *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification, are
- * permitted provided that the following conditions are met:
- *
- *   1. Redistributions of source code must retain the above copyright notice, this list of
- *      conditions and the following disclaimer.
- *
- *   2. Redistributions in binary form must reproduce the above copyright notice, this list
- *      of conditions and the following disclaimer in the documentation and/or other materials
- *      provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SLJIT_CONFIG_H_
-#define _SLJIT_CONFIG_H_
-
-/* --------------------------------------------------------------------- */
-/*  Custom defines                                                       */
-/* --------------------------------------------------------------------- */
-
-/* Put your custom defines here. This empty section will never change
-   which helps maintaining patches (with diff / patch utilities). */
-
-/* --------------------------------------------------------------------- */
-/*  Architecture                                                         */
-/* --------------------------------------------------------------------- */
-
-/* Architecture selection. */
-/* #define SLJIT_CONFIG_X86_32 1 */
-/* #define SLJIT_CONFIG_X86_64 1 */
-/* #define SLJIT_CONFIG_ARM_V5 1 */
-/* #define SLJIT_CONFIG_ARM_V7 1 */
-/* #define SLJIT_CONFIG_ARM_THUMB2 1 */
-/* #define SLJIT_CONFIG_PPC_32 1 */
-/* #define SLJIT_CONFIG_PPC_64 1 */
-/* #define SLJIT_CONFIG_MIPS_32 1 */
-/* #define SLJIT_CONFIG_SPARC_32 1 */
-
-/* #define SLJIT_CONFIG_AUTO 1 */
-/* #define SLJIT_CONFIG_UNSUPPORTED 1 */
-
-/* --------------------------------------------------------------------- */
-/*  Utilities                                                            */
-/* --------------------------------------------------------------------- */
-
-/* Useful for thread-safe compiling of global functions. */
-#ifndef SLJIT_UTIL_GLOBAL_LOCK
-/* Enabled by default */
-#define SLJIT_UTIL_GLOBAL_LOCK 1
-#endif
-
-/* Implements a stack like data structure (by using mmap / VirtualAlloc). */
-#ifndef SLJIT_UTIL_STACK
-/* Enabled by default */
-#define SLJIT_UTIL_STACK 1
-#endif
-
-/* Single threaded application. Does not require any locks. */
-#ifndef SLJIT_SINGLE_THREADED
-/* Disabled by default. */
-#define SLJIT_SINGLE_THREADED 0
-#endif
-
-/* --------------------------------------------------------------------- */
-/*  Configuration                                                        */
-/* --------------------------------------------------------------------- */
-
-/* If SLJIT_STD_MACROS_DEFINED is not defined, the application should
-   define SLJIT_MALLOC, SLJIT_FREE, SLJIT_MEMMOVE, and NULL. */
-#ifndef SLJIT_STD_MACROS_DEFINED
-/* Disabled by default. */
-#define SLJIT_STD_MACROS_DEFINED 0
-#endif
-
-/* Executable code allocation:
-   If SLJIT_EXECUTABLE_ALLOCATOR is not defined, the application should
-   define both SLJIT_MALLOC_EXEC and SLJIT_FREE_EXEC. */
-#ifndef SLJIT_EXECUTABLE_ALLOCATOR
-/* Enabled by default. */
-#define SLJIT_EXECUTABLE_ALLOCATOR 1
-#endif
-
-/* Debug checks (assertions, etc.). */
-#ifndef SLJIT_DEBUG
-/* Enabled by default */
-#define SLJIT_DEBUG 1
-#endif
-
-/* Verbose operations */
-#ifndef SLJIT_VERBOSE
-/* Enabled by default */
-#define SLJIT_VERBOSE 1
-#endif
-
-/* See the beginning of sljitConfigInternal.h */
-
-#endif

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/sljit/sljitConfigInternal.h

@@ -1,484 +0,0 @@
-/*
- *    Stack-less Just-In-Time compiler
- *
- *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification, are
- * permitted provided that the following conditions are met:
- *
- *   1. Redistributions of source code must retain the above copyright notice, this list of
- *      conditions and the following disclaimer.
- *
- *   2. Redistributions in binary form must reproduce the above copyright notice, this list
- *      of conditions and the following disclaimer in the documentation and/or other materials
- *      provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SLJIT_CONFIG_INTERNAL_H_
-#define _SLJIT_CONFIG_INTERNAL_H_
-
-/*
-   SLJIT defines the following macros depending on the target architecture:
-
-   Feature detection (boolean) macros:
-   SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
-   SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
-   SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
-   SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing a double array by index
-   SLJIT_LITTLE_ENDIAN : little endian architecture
-   SLJIT_BIG_ENDIAN : big endian architecture
-   SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
-   SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
-   SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
-
-   Types and useful macros:
-   sljit_sb, sljit_ub : signed and unsigned 8 bit byte
-   sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type
-   sljit_si, sljit_ui : signed and unsigned 32 bit integer type
-   sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer
-   sljit_p : unsgined pointer value (usually the same as sljit_uw, but
-             some 64 bit ABIs may use 32 bit pointers)
-   sljit_s : single precision floating point value
-   sljit_d : double precision floating point value
-   SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT
-   SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
-*/
-
-#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
-	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
-	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
-	|| (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED))
-#error "An architecture must be selected"
-#endif
-
-/* Sanity check. */
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
-	+ (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	+ (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
-	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
-	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
-	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2
-#error "Multiple architectures are selected"
-#endif
-
-/* Auto select option (requires compiler support) */
-#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
-
-#ifndef _WIN32
-
-#if defined(__i386__) || defined(__i386)
-#define SLJIT_CONFIG_X86_32 1
-#elif defined(__x86_64__)
-#define SLJIT_CONFIG_X86_64 1
-#elif defined(__arm__) || defined(__ARM__)
-#ifdef __thumb2__
-#define SLJIT_CONFIG_ARM_THUMB2 1
-#elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__)
-#define SLJIT_CONFIG_ARM_V7 1
-#else
-#define SLJIT_CONFIG_ARM_V5 1
-#endif
-#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__))
-#define SLJIT_CONFIG_PPC_64 1
-#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER)
-#define SLJIT_CONFIG_PPC_32 1
-#elif defined(__mips__)
-#define SLJIT_CONFIG_MIPS_32 1
-#elif defined(__sparc__) || defined(__sparc)
-#define SLJIT_CONFIG_SPARC_32 1
-#else
-/* Unsupported architecture */
-#define SLJIT_CONFIG_UNSUPPORTED 1
-#endif
-
-#else /* !_WIN32 */
-
-#if defined(_M_X64) || defined(__x86_64__)
-#define SLJIT_CONFIG_X86_64 1
-#elif defined(_ARM_)
-#define SLJIT_CONFIG_ARM_V5 1
-#else
-#define SLJIT_CONFIG_X86_32 1
-#endif
-
-#endif /* !WIN32 */
-#endif /* SLJIT_CONFIG_AUTO */
-
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-#undef SLJIT_EXECUTABLE_ALLOCATOR
-#endif
-
-#if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED)
-
-/* These libraries are needed for the macros below. */
-#include <stdlib.h>
-#include <string.h>
-
-#endif /* STD_MACROS_DEFINED */
-
-/* General macros:
-   Note: SLJIT is designed to be independent from them as possible.
-
-   In release mode (SLJIT_DEBUG is not defined) only the following macros are needed:
-*/
-
-#ifndef SLJIT_MALLOC
-#define SLJIT_MALLOC(size) malloc(size)
-#endif
-
-#ifndef SLJIT_FREE
-#define SLJIT_FREE(ptr) free(ptr)
-#endif
-
-#ifndef SLJIT_MEMMOVE
-#define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len)
-#endif
-
-#ifndef SLJIT_ZEROMEM
-#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
-#endif
-
-#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
-
-#if defined(__GNUC__) && (__GNUC__ >= 3)
-#define SLJIT_LIKELY(x)		__builtin_expect((x), 1)
-#define SLJIT_UNLIKELY(x)	__builtin_expect((x), 0)
-#else
-#define SLJIT_LIKELY(x)		(x)
-#define SLJIT_UNLIKELY(x)	(x)
-#endif
-
-#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */
-
-#ifndef SLJIT_INLINE
-/* Inline functions. */
-#define SLJIT_INLINE __inline
-#endif
-
-#ifndef SLJIT_CONST
-/* Const variables. */
-#define SLJIT_CONST const
-#endif
-
-#ifndef SLJIT_UNUSED_ARG
-/* Unused arguments. */
-#define SLJIT_UNUSED_ARG(arg) (void)arg
-#endif
-
-#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
-/* Static ABI functions. For all-in-one programs. */
-
-#if defined(__GNUC__)
-/* Disable unused warnings in gcc. */
-#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused))
-#else
-#define SLJIT_API_FUNC_ATTRIBUTE static
-#endif
-
-#else
-#define SLJIT_API_FUNC_ATTRIBUTE
-#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
-
-#ifndef SLJIT_CACHE_FLUSH
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-
-/* Not required to implement on archs with unified caches. */
-#define SLJIT_CACHE_FLUSH(from, to)
-
-#elif defined __APPLE__
-
-/* Supported by all macs since Mac OS 10.5.
-   However, it does not work on non-jailbroken iOS devices,
-   although the compilation is successful. */
-
-#define SLJIT_CACHE_FLUSH(from, to) \
-	sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from))
-
-#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-
-/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	ppc_cache_flush((from), (to))
-
-#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-
-/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	sparc_cache_flush((from), (to))
-
-#else
-
-/* Calls __ARM_NR_cacheflush on ARM-Linux. */
-#define SLJIT_CACHE_FLUSH(from, to) \
-	__clear_cache((char*)(from), (char*)(to))
-
-#endif
-
-#endif /* !SLJIT_CACHE_FLUSH */
-
-/* 8 bit byte type. */
-typedef unsigned char sljit_ub;
-typedef signed char sljit_sb;
-
-/* 16 bit half-word type. */
-typedef unsigned short int sljit_uh;
-typedef signed short int sljit_sh;
-
-/* 32 bit integer type. */
-typedef unsigned int sljit_ui;
-typedef signed int sljit_si;
-
-/* Machine word type. Can encapsulate a pointer.
-     32 bit for 32 bit machines.
-     64 bit for 64 bit machines. */
-#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-/* Just to have something. */
-#define SLJIT_WORD_SHIFT 0
-typedef unsigned long int sljit_uw;
-typedef long int sljit_sw;
-#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_32BIT_ARCHITECTURE 1
-#define SLJIT_WORD_SHIFT 2
-typedef unsigned int sljit_uw;
-typedef int sljit_sw;
-#else
-#define SLJIT_64BIT_ARCHITECTURE 1
-#define SLJIT_WORD_SHIFT 3
-#ifdef _WIN32
-typedef unsigned __int64 sljit_uw;
-typedef __int64 sljit_sw;
-#else
-typedef unsigned long int sljit_uw;
-typedef long int sljit_sw;
-#endif
-#endif
-
-typedef sljit_uw sljit_p;
-
-/* Floating point types. */
-typedef float sljit_s;
-typedef double sljit_d;
-
-/* Shift for pointer sized data. */
-#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT
-
-/* Shift for double precision sized data. */
-#define SLJIT_DOUBLE_SHIFT 3
-
-#ifndef SLJIT_W
-
-/* Defining long constants. */
-#if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE)
-#define SLJIT_W(w)	(w##ll)
-#else
-#define SLJIT_W(w)	(w)
-#endif
-
-#endif /* !SLJIT_W */
-
-#ifndef SLJIT_CALL
-
-/* ABI (Application Binary Interface) types. */
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#if defined(__GNUC__)
-
-#define SLJIT_CALL __attribute__ ((fastcall))
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(_MSC_VER)
-
-#define SLJIT_CALL __fastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(__BORLANDC__)
-
-#define SLJIT_CALL __msfastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#else /* Unknown compiler. */
-
-/* The cdecl attribute is the default. */
-#define SLJIT_CALL
-
-#endif
-
-#else /* Non x86-32 architectures. */
-
-#define SLJIT_CALL
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#endif /* !SLJIT_CALL */
-
-#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
-
-/* These macros are useful for the application. */
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
-	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_BIG_ENDIAN 1
-
-#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
-
-#ifdef __MIPSEL__
-#define SLJIT_LITTLE_ENDIAN 1
-#else
-#define SLJIT_BIG_ENDIAN 1
-#endif
-
-#else
-#define SLJIT_LITTLE_ENDIAN 1
-#endif
-
-#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */
-
-/* Sanity check. */
-#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
-#error "Exactly one endianness must be selected"
-#endif
-
-#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
-#error "Exactly one endianness must be selected"
-#endif
-
-#ifndef SLJIT_INDIRECT_CALL
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32 && defined _AIX)
-/* It seems certain ppc compilers use an indirect addressing for functions
-   which makes things complicated. */
-#define SLJIT_INDIRECT_CALL 1
-#endif
-#endif /* SLJIT_INDIRECT_CALL */
-
-#ifndef SLJIT_RETURN_ADDRESS_OFFSET
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_RETURN_ADDRESS_OFFSET 8
-#else
-#define SLJIT_RETURN_ADDRESS_OFFSET 0
-#endif
-#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
-
-#ifndef SLJIT_SSE2
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-/* Turn on SSE2 support on x86. */
-#define SLJIT_SSE2 1
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-/* Auto detect SSE2 support using CPUID.
-   On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_DETECT_SSE2 1
-#endif
-
-#endif /* (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) */
-
-#endif /* !SLJIT_SSE2 */
-
-#ifndef SLJIT_UNALIGNED
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
-	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
-	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
-	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
-	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
-	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_UNALIGNED 1
-#endif
-
-#endif /* !SLJIT_UNALIGNED */
-
-#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
-SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
-#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size)
-#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
-#endif
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
-#include <stdio.h>
-#endif
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-
-#if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP)
-
-/* SLJIT_HALT_PROCESS must halt the process. */
-#ifndef SLJIT_HALT_PROCESS
-#include <stdlib.h>
-
-#define SLJIT_HALT_PROCESS() \
-	abort();
-#endif /* !SLJIT_HALT_PROCESS */
-
-#include <stdio.h>
-
-#endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */
-
-/* Feel free to redefine these two macros. */
-#ifndef SLJIT_ASSERT
-
-#define SLJIT_ASSERT(x) \
-	do { \
-		if (SLJIT_UNLIKELY(!(x))) { \
-			printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \
-			SLJIT_HALT_PROCESS(); \
-		} \
-	} while (0)
-
-#endif /* !SLJIT_ASSERT */
-
-#ifndef SLJIT_ASSERT_STOP
-
-#define SLJIT_ASSERT_STOP() \
-	do { \
-		printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \
-		SLJIT_HALT_PROCESS(); \
-	} while (0)
-
-#endif /* !SLJIT_ASSERT_STOP */
-
-#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
-
-/* Forcing empty, but valid statements. */
-#undef SLJIT_ASSERT
-#undef SLJIT_ASSERT_STOP
-
-#define SLJIT_ASSERT(x) \
-	do { } while (0)
-#define SLJIT_ASSERT_STOP() \
-	do { } while (0)
-
-#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
-
-#ifndef SLJIT_COMPILE_ASSERT
-
-/* Should be improved eventually. */
-#define SLJIT_COMPILE_ASSERT(x, description) \
-	SLJIT_ASSERT(x)
-
-#endif /* !SLJIT_COMPILE_ASSERT */
-
-#endif