esruby 0.0.0 → 0.0.2

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/RunTest

@@ -1,1015 +0,0 @@
-#! /bin/sh
-
-# Run the PCRE tests using the pcretest program. The appropriate tests are
-# selected, depending on which build-time options were used.
-#
-# All tests are now run both with and without -s, to ensure that everything is
-# tested with and without studying. However, there are some tests that produce
-# different output after studying, typically when we are tracing the actual
-# matching process (for example, using auto-callouts). In these few cases, the
-# tests are duplicated in the files, one with /S to force studying always, and
-# one with /SS to force *not* studying always. The use of -s doesn't then make
-# any difference to their output. There is also one test which compiles invalid
-# UTF-8 with the UTF-8 check turned off; for this, studying must also be
-# disabled with /SS.
-#
-# When JIT support is available, all the tests are also run with -s+ to test
-# (again, almost) everything with studying and the JIT option. There are also
-# two tests for JIT-specific features, one to be run when JIT support is
-# available, and one when it is not.
-#
-# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also
-# possible to select which to test by the arguments -8, -16 or -32.
-#
-# Other arguments for this script can be individual test numbers, or the word
-# "valgrind", "valgrind-log" or "sim" followed by an argument to run cross-
-# compiled executables under a simulator, for example:
-#
-# RunTest 3 sim "qemu-arm -s 8388608"
-#
-#
-# There are two special cases where only one argument is allowed:
-#
-# If the first and only argument is "ebcdic", the script runs the special
-# EBCDIC test that can be useful for checking certain EBCDIC features, even
-# when run in an ASCII environment.
-#
-# If the script is obeyed as "RunTest list", a list of available tests is
-# output, but none of them are run.
-
-
-# Define test titles in variables so that they can be output as a list. Some
-# of them are modified (e.g. with -8 or -16) when used in the actual tests.
-
-title1="Test 1: Main functionality (Compatible with Perl >= 5.10)"
-title2="Test 2: API, errors, internals, and non-Perl stuff"
-title3="Test 3: Locale-specific features"
-title4A="Test 4: UTF"
-title4B=" support (Compatible with Perl >= 5.10)"
-title5="Test 5: API, internals, and non-Perl stuff for UTF"
-title6="Test 6: Unicode property support (Compatible with Perl >= 5.10)"
-title7="Test 7: API, internals, and non-Perl stuff for Unicode property support"
-title8="Test 8: DFA matching main functionality"
-title9="Test 9: DFA matching with UTF"
-title10="Test 10: DFA matching with Unicode properties"
-title11="Test 11: Internal offsets and code size tests"
-title12="Test 12: JIT-specific features (JIT available)"
-title13="Test 13: JIT-specific features (JIT not available)"
-title14="Test 14: Specials for the basic 8-bit library"
-title15="Test 15: Specials for the 8-bit library with UTF-8 support"
-title16="Test 16: Specials for the 8-bit library with Unicode propery support"
-title17="Test 17: Specials for the basic 16/32-bit library"
-title18="Test 18: Specials for the 16/32-bit library with UTF-16/32 support"
-title19="Test 19: Specials for the 16/32-bit library with Unicode property support"
-title20="Test 20: DFA specials for the basic 16/32-bit library"
-title21="Test 21: Reloads for the basic 16/32-bit library"
-title22="Test 22: Reloads for the 16/32-bit library with UTF-16/32 support"
-title23="Test 23: Specials for the 16-bit library"
-title24="Test 24: Specials for the 16-bit library with UTF-16 support"
-title25="Test 25: Specials for the 32-bit library"
-title26="Test 26: Specials for the 32-bit library with UTF-32 support"
-
-if [ $# -eq 1 -a "$1" = "list" ]; then
-  echo $title1
-  echo $title2 "(not UTF)"
-  echo $title3
-  echo $title4A $title4B
-  echo $title5 support
-  echo $title6
-  echo $title7
-  echo $title8
-  echo $title9
-  echo $title10
-  echo $title11
-  echo $title12
-  echo $title13
-  echo $title14
-  echo $title15
-  echo $title16
-  echo $title17
-  echo $title18
-  echo $title19
-  echo $title20
-  echo $title21
-  echo $title22
-  echo $title23
-  echo $title24
-  echo $title25
-  echo $title26
-  exit 0
-fi
-
-# Set up a suitable "diff" command for comparison. Some systems
-# have a diff that lacks a -u option. Try to deal with this.
-
-cf="diff"
-diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u"
-
-# Find the test data
-
-if [ -n "$srcdir" -a -d "$srcdir" ] ; then
-  testdata="$srcdir/testdata"
-elif [ -d "./testdata" ] ; then
-  testdata=./testdata
-elif [ -d "../testdata" ] ; then
-  testdata=../testdata
-else
-  echo "Cannot find the testdata directory"
-  exit 1
-fi
-
-
-# ------ Special EBCDIC Test -------
-
-if [ $# -eq 1 -a "$1" = "ebcdic" ]; then
-  ./pcretest -C ebcdic >/dev/null
-  ebcdic=$?
-  if [ $ebcdic -ne 1 ] ; then
-    echo "Cannot run EBCDIC tests: EBCDIC support not compiled"
-    exit 1
-  fi
-
-  for opt in "" "-s" "-dfa" "-s -dfa"; do
-    ./pcretest -q $opt $testdata/testinputEBC >testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutputEBC testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    if [ "$opt" = "-s" ] ; then echo "  OK with study"
-    elif [ "$opt" = "-dfa" ] ; then echo "  OK using DFA"
-    elif [ "$opt" = "-s -dfa" ] ; then echo "  OK using DFA with study"
-    else echo "  OK"
-    fi
-  done
-
-exit 0
-fi
-
-
-# ------ Normal Tests ------
-
-# Default values
-
-valgrind=
-sim=
-arg8=
-arg16=
-arg32=
-
-# This is in case the caller has set aliases (as I do - PH)
-unset cp ls mv rm
-
-# Select which tests to run; for those that are explicitly requested, check
-# that the necessary optional facilities are available.
-
-do1=no
-do2=no
-do3=no
-do4=no
-do5=no
-do6=no
-do7=no
-do8=no
-do9=no
-do10=no
-do11=no
-do12=no
-do13=no
-do14=no
-do15=no
-do16=no
-do17=no
-do18=no
-do19=no
-do20=no
-do21=no
-do22=no
-do23=no
-do24=no
-do25=no
-do26=no
-
-while [ $# -gt 0 ] ; do
-  case $1 in
-    1) do1=yes;;
-    2) do2=yes;;
-    3) do3=yes;;
-    4) do4=yes;;
-    5) do5=yes;;
-    6) do6=yes;;
-    7) do7=yes;;
-    8) do8=yes;;
-    9) do9=yes;;
-   10) do10=yes;;
-   11) do11=yes;;
-   12) do12=yes;;
-   13) do13=yes;;
-   14) do14=yes;;
-   15) do15=yes;;
-   16) do16=yes;;
-   17) do17=yes;;
-   18) do18=yes;;
-   19) do19=yes;;
-   20) do20=yes;;
-   21) do21=yes;;
-   22) do22=yes;;
-   23) do23=yes;;
-   24) do24=yes;;
-   25) do25=yes;;
-   26) do26=yes;;
-   -8) arg8=yes;;
-  -16) arg16=yes;;
-  -32) arg32=yes;;
-   valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";;
-   valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";;
-   sim) shift; sim=$1;;
-    *) echo "Unknown test number '$1'"; exit 1;;
-  esac
-  shift
-done
-
-# Find which optional facilities are available.
-
-$sim ./pcretest -C linksize >/dev/null
-link_size=$?
-if [ $link_size -lt 2 ] ; then
-  echo "Failed to find internal link size"
-  exit 1
-fi
-if [ $link_size -gt 4 ] ; then
-  echo "Failed to find internal link size"
-  exit 1
-fi
-
-# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only
-# one need be.
-
-$sim ./pcretest -C pcre8 >/dev/null
-support8=$?
-$sim ./pcretest -C pcre16 >/dev/null
-support16=$?
-$sim ./pcretest -C pcre32 >/dev/null
-support32=$?
-
-# Initialize all bitsizes skipped
-
-test8=skip
-test16=skip
-test32=skip
-
-# If no bitsize arguments, select all that are available
-
-if [ "$arg8$arg16$arg32" = "" ] ; then
-  if [ $support8 -ne 0 ] ; then
-    test8=
-  fi
-  if [ $support16 -ne 0 ] ; then
-    test16=-16
-  fi
-  if [ $support32 -ne 0 ] ; then
-    test32=-32
-  fi
-
-# Select requested bit sizes
-
-else
-  if [ "$arg8" = yes ] ; then
-    if [ $support8 -eq 0 ] ; then
-      echo "Cannot run 8-bit library tests: 8-bit library not compiled"
-      exit 1
-    fi
-    test8=
-  fi
-  if [ "$arg16" = yes ] ; then
-    if [ $support16 -eq 0 ] ; then
-      echo "Cannot run 16-bit library tests: 16-bit library not compiled"
-      exit 1
-    fi
-    test16=-16
-  fi
-  if [ "$arg32" = yes ] ; then
-    if [ $support32 -eq 0 ] ; then
-      echo "Cannot run 32-bit library tests: 32-bit library not compiled"
-      exit 1
-    fi
-    test32=-32
-  fi
-fi
-
-# UTF support always applies to all bit sizes if both are supported; we can't
-# have UTF-8 support without UTF-16 support (for example).
-
-$sim ./pcretest -C utf >/dev/null
-utf=$?
-
-$sim ./pcretest -C ucp >/dev/null
-ucp=$?
-
-jitopt=
-$sim ./pcretest -C jit >/dev/null
-jit=$?
-if [ $jit -ne 0 ] ; then
-  jitopt=-s+
-fi
-
-if [ $utf -eq 0 ] ; then
-  if [ $do4 = yes ] ; then
-    echo "Can't run test 4 because UTF support is not configured"
-    exit 1
-  fi
-  if [ $do5 = yes ] ; then
-    echo "Can't run test 5 because UTF support is not configured"
-    exit 1
-  fi
-  if [ $do9 = yes ] ; then
-    echo "Can't run test 8 because UTF support is not configured"
-    exit 1
-  fi
-  if [ $do15 = yes ] ; then
-    echo "Can't run test 15 because UTF support is not configured"
-    exit 1
-  fi
-  if [ $do18 = yes ] ; then
-    echo "Can't run test 18 because UTF support is not configured"
-  fi
-  if [ $do22 = yes ] ; then
-    echo "Can't run test 22 because UTF support is not configured"
-  fi
-fi
-
-if [ $ucp -eq 0 ] ; then
-  if [ $do6 = yes ] ; then
-    echo "Can't run test 6 because Unicode property support is not configured"
-    exit 1
-  fi
-  if [ $do7 = yes ] ; then
-    echo "Can't run test 7 because Unicode property support is not configured"
-    exit 1
-  fi
-  if [ $do10 = yes ] ; then
-    echo "Can't run test 10 because Unicode property support is not configured"
-    exit 1
-  fi
-  if [ $do16 = yes ] ; then
-    echo "Can't run test 16 because Unicode property support is not configured"
-    exit 1
-  fi
-  if [ $do19 = yes ] ; then
-    echo "Can't run test 19 because Unicode property support is not configured"
-    exit 1
-  fi
-fi
-
-if [ $link_size -ne 2 ] ; then
-  if [ $do11 = yes ] ; then
-    echo "Can't run test 11 because the link size ($link_size) is not 2"
-    exit 1
-  fi
-fi
-
-if [ $jit -eq 0 ] ; then
-  if [ $do12 = "yes" ] ; then
-    echo "Can't run test 12 because JIT support is not configured"
-    exit 1
-  fi
-else
-  if [ $do13 = "yes" ] ; then
-    echo "Can't run test 13 because JIT support is configured"
-    exit 1
-  fi
-fi
-
-# If no specific tests were requested, select all. Those that are not
-# relevant will be skipped.
-
-if [ $do1  = no -a $do2  = no -a $do3  = no -a $do4  = no -a \
-     $do5  = no -a $do6  = no -a $do7  = no -a $do8  = no -a \
-     $do9  = no -a $do10 = no -a $do11 = no -a $do12 = no -a \
-     $do13 = no -a $do14 = no -a $do15 = no -a $do16 = no -a \
-     $do17 = no -a $do18 = no -a $do19 = no -a $do20 = no -a \
-     $do21 = no -a $do22 = no -a $do23 = no -a $do24 = no -a \
-     $do25 = no -a $do26 = no ] ; then
-  do1=yes
-  do2=yes
-  do3=yes
-  do4=yes
-  do5=yes
-  do6=yes
-  do7=yes
-  do8=yes
-  do9=yes
-  do10=yes
-  do11=yes
-  do12=yes
-  do13=yes
-  do14=yes
-  do15=yes
-  do16=yes
-  do17=yes
-  do18=yes
-  do19=yes
-  do20=yes
-  do21=yes
-  do22=yes
-  do23=yes
-  do24=yes
-  do25=yes
-  do26=yes
-fi
-
-# Show which release and which test data
-
-echo ""
-echo PCRE C library tests using test data from $testdata
-$sim ./pcretest /dev/null
-
-for bmode in "$test8" "$test16" "$test32"; do
-  case "$bmode" in
-    skip) continue;;
-    -16)  if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi
-          bits=16; echo "---- Testing 16-bit library ----"; echo "";;
-    -32)  if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi
-          bits=32; echo "---- Testing 32-bit library ----"; echo "";;
-    *)    bits=8; echo "---- Testing 8-bit library ----"; echo "";;
-  esac
-
-# Primary test, compatible with JIT and all versions of Perl >= 5.8
-
-if [ $do1 = yes ] ; then
-  echo $title1
-  for opt in "" "-s" $jitopt; do
-    $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput1 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput1 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    if [ "$opt" = "-s" ] ; then echo "  OK with study"
-    elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-    else echo "  OK"
-    fi
-  done
-fi
-
-# PCRE tests that are not JIT or Perl-compatible: API, errors, internals
-
-if [ $do2 = yes ] ; then
-  echo $title2 "(not UTF-$bits)"
-  for opt in "" "-s" $jitopt; do
-    $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput2 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput2 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else
-      echo " "
-      echo "** Test 2 requires a lot of stack. If it has crashed with a"
-      echo "** segmentation fault, it may be that you do not have enough"
-      echo "** stack available by default. Please see the 'pcrestack' man"
-      echo "** page for a discussion of PCRE's stack usage."
-      echo " "
-      exit 1
-    fi
-    if [ "$opt" = "-s" ] ; then echo "  OK with study"
-    elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-    else echo "  OK"
-    fi
-  done
-fi
-
-# Locale-specific tests, provided that either the "fr_FR" or the "french"
-# locale is available. The former is the Unix-like standard; the latter is
-# for Windows. Another possibility is "fr", which needs to be run against
-# the Windows-specific input and output files.
-
-if [ $do3 = yes ] ; then
-  locale -a | grep '^fr_FR$' >/dev/null
-  if [ $? -eq 0 ] ; then
-    locale=fr_FR
-    infile=$testdata/testinput3
-    outfile=$testdata/testoutput3
-  else
-    infile=test3input
-    outfile=test3output
-    locale -a | grep '^french$' >/dev/null
-    if [ $? -eq 0 ] ; then
-      locale=french
-      sed 's/fr_FR/french/' $testdata/testinput3 >test3input
-      sed 's/fr_FR/french/' $testdata/testoutput3 >test3output
-    else
-      locale -a | grep '^fr$' >/dev/null
-      if [ $? -eq 0 ] ; then
-        locale=fr
-        sed 's/fr_FR/fr/' $testdata/wintestinput3 >test3input
-        sed 's/fr_FR/fr/' $testdata/wintestoutput3 >test3output
-      else
-        locale=
-      fi
-    fi
-  fi
-
-  if [ "$locale" != "" ] ; then
-    echo $title3 "(using '$locale' locale)"
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $infile testtry
-      if [ $? = 0 ] ; then
-        $cf $outfile testtry
-        if [ $? != 0 ] ; then
-          echo " "
-          echo "Locale test did not run entirely successfully."
-          echo "This usually means that there is a problem with the locale"
-          echo "settings rather than a bug in PCRE."
-          break;
-        else
-          if [ "$opt" = "-s" ] ; then echo "  OK with study"
-          elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-          else echo "  OK"
-          fi
-        fi
-      else exit 1
-      fi
-    done
-  else
-    echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr' or"
-    echo "'french' locales exist, or the \"locale\" command is not available"
-    echo "to check for them."
-    echo " "
-  fi
-fi
-
-# Additional tests for UTF support
-
-if [ $do4 = yes ] ; then
-  echo ${title4A}-${bits}${title4B}
-  if [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput4 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput4 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-if [ $do5 = yes ] ; then
-  echo ${title5}-${bits} support
-  if [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput5 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput5 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-if [ $do6 = yes ] ; then
-  echo $title6
-  if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
-    echo "  Skipped because Unicode property support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput6 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput6 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Test non-Perl-compatible Unicode property support
-
-if [ $do7 = yes ] ; then
-  echo $title7
-  if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
-    echo "  Skipped because Unicode property support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput7 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput7 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for DFA matching support
-
-if [ $do8 = yes ] ; then
-  echo $title8
-  for opt in "" "-s"; do
-    $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput8 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput8 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
-  done
-fi
-
-if [ $do9 = yes ] ; then
-  echo ${title9}-${bits}
-  if [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    for opt in "" "-s"; do
-      $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput9 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput9 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
-    done
-  fi
-fi
-
-if [ $do10 = yes ] ; then
-  echo $title10
-  if [ $utf -eq 0 -o $ucp -eq 0 ] ; then
-    echo "  Skipped because Unicode property support is not available"
-  else
-    for opt in "" "-s"; do
-      $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput10 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput10 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
-    done
-  fi
-fi
-
-# Test of internal offsets and code sizes. This test is run only when there
-# is Unicode property support and the link size is 2. The actual tests are
-# mostly the same as in some of the above, but in this test we inspect some
-# offsets and sizes that require a known link size. This is a doublecheck for
-# the maintainer, just in case something changes unexpectely. The output from
-# this test is not the same in 8-bit and 16-bit modes.
-
-if [ $do11 = yes ] ; then
-  echo $title11
-  if [ $link_size -ne 2 ] ; then
-    echo "  Skipped because link size is not 2"
-  elif [ $ucp -eq 0 ] ; then
-    echo "  Skipped because Unicode property support is not available"
-  else
-    for opt in "" "-s"; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput11 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput11-$bits testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study" ; else echo "  OK"; fi
-    done
-  fi
-fi
-
-# Test JIT-specific features when JIT is available
-
-if [ $do12 = yes ] ; then
-  echo $title12
-  if [ $jit -eq 0 ] ; then
-    echo "  Skipped because JIT is not available or not usable"
-  else
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput12 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput12 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-# Test JIT-specific features when JIT is not available
-
-if [ $do13 = yes ] ; then
-  echo $title13
-  if [ $jit -ne 0 ] ; then
-    echo "  Skipped because JIT is available"
-  else
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput13 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput13 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-# Tests for 8-bit-specific features
-
-if [ "$do14" = yes ] ; then
-  echo $title14
-  if [ "$bits" = "16" -o "$bits" = "32" ] ; then
-    echo "  Skipped when running 16/32-bit tests"
-  else
-    cp -f $testdata/saved16 testsaved16
-    cp -f $testdata/saved32 testsaved32
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput14 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput14 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for 8-bit-specific features (needs UTF-8 support)
-
-if [ "$do15" = yes ] ; then
-  echo $title15
-  if [ "$bits" = "16" -o "$bits" = "32" ] ; then
-    echo "  Skipped when running 16/32-bit tests"
-  elif [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput15 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput15 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for 8-bit-specific features (Unicode property support)
-
-if [ $do16 = yes ] ; then
-  echo $title16
-  if [ "$bits" = "16" -o "$bits" = "32" ] ; then
-    echo "  Skipped when running 16/32-bit tests"
-  elif [ $ucp -eq 0 ] ; then
-    echo "  Skipped because Unicode property support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput16 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput16 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for 16/32-bit-specific features
-
-if [ $do17 = yes ] ; then
-  echo $title17
-  if [ "$bits" = "8" ] ; then
-    echo "  Skipped when running 8-bit tests"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput17 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput17 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for 16/32-bit-specific features (UTF-16/32 support)
-
-if [ $do18 = yes ] ; then
-  echo $title18
-  if [ "$bits" = "8" ] ; then
-    echo "  Skipped when running 8-bit tests"
-  elif [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput18 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput18-$bits testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for 16/32-bit-specific features (Unicode property support)
-
-if [ $do19 = yes ] ; then
-  echo $title19
-  if [ "$bits" = "8" ] ; then
-    echo "  Skipped when running 8-bit tests"
-  elif [ $ucp -eq 0 ] ; then
-    echo "  Skipped because Unicode property support is not available"
-  else
-    for opt in "" "-s" $jitopt; do
-      $sim $valgrind ./pcretest -q $bmode $opt $testdata/testinput19 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput19 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      elif [ "$opt" = "-s+" ] ; then echo "  OK with JIT study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for 16/32-bit-specific features in DFA non-UTF-16/32 mode
-
-if [ $do20 = yes ] ; then
-  echo $title20
-  if [ "$bits" = "8" ] ; then
-    echo "  Skipped when running 8-bit tests"
-  else
-    for opt in "" "-s"; do
-      $sim $valgrind ./pcretest -q $bmode $opt -dfa $testdata/testinput20 testtry
-      if [ $? = 0 ] ; then
-        $cf $testdata/testoutput20 testtry
-        if [ $? != 0 ] ; then exit 1; fi
-      else exit 1
-      fi
-      if [ "$opt" = "-s" ] ; then echo "  OK with study"
-      else echo "  OK"
-      fi
-    done
-  fi
-fi
-
-# Tests for reloads with 16/32-bit library
-
-if [ $do21 = yes ] ; then
-  echo $title21
-  if [ "$bits" = "8" ] ; then
-    echo "  Skipped when running 8-bit tests"
-  elif [ $link_size -ne 2 ] ; then
-    echo "  Skipped because link size is not 2"
-  else
-    cp -f $testdata/saved8 testsaved8
-    cp -f $testdata/saved16LE-1 testsaved16LE-1
-    cp -f $testdata/saved16BE-1 testsaved16BE-1
-    cp -f $testdata/saved32LE-1 testsaved32LE-1
-    cp -f $testdata/saved32BE-1 testsaved32BE-1
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput21 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput21-$bits testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-# Tests for reloads with 16/32-bit library (UTF-16 support)
-
-if [ $do22 = yes ] ; then
-  echo $title22
-  if [ "$bits" = "8" ] ; then
-    echo "  Skipped when running 8-bit tests"
-  elif [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  elif [ $link_size -ne 2 ] ; then
-    echo "  Skipped because link size is not 2"
-  else
-    cp -f $testdata/saved16LE-2 testsaved16LE-2
-    cp -f $testdata/saved16BE-2 testsaved16BE-2
-    cp -f $testdata/saved32LE-2 testsaved32LE-2
-    cp -f $testdata/saved32BE-2 testsaved32BE-2
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput22 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput22-$bits testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-if [ $do23 = yes ] ; then
-  echo $title23
-  if [ "$bits" = "8" -o "$bits" = "32" ] ; then
-    echo "  Skipped when running 8/32-bit tests"
-  else
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput23 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput23 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-if [ $do24 = yes ] ; then
-  echo $title24
-  if [ "$bits" = "8" -o "$bits" = "32" ] ; then
-    echo "  Skipped when running 8/32-bit tests"
-  elif [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput24 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput24 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-if [ $do25 = yes ] ; then
-  echo $title25
-  if [ "$bits" = "8" -o "$bits" = "16" ] ; then
-    echo "  Skipped when running 8/16-bit tests"
-  else
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput25 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput25 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-if [ $do26 = yes ] ; then
-  echo $title26
-  if [ "$bits" = "8" -o "$bits" = "16" ] ; then
-    echo "  Skipped when running 8/16-bit tests"
-  elif [ $utf -eq 0 ] ; then
-    echo "  Skipped because UTF-$bits support is not available"
-  else
-    $sim $valgrind ./pcretest -q $bmode $testdata/testinput26 testtry
-    if [ $? = 0 ] ; then
-      $cf $testdata/testoutput26 testtry
-      if [ $? != 0 ] ; then exit 1; fi
-    else exit 1
-    fi
-    echo "  OK"
-  fi
-fi
-
-# End of loop for 8/16/32-bit tests
-done
-
-# Clean up local working files
-rm -f test3input test3output testNinput testsaved* teststderr teststdout testtry
-
-# End