esruby 0.0.0 → 0.0.2

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/config.h.in

@@ -1,343 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-
-/* PCRE is written in Standard C, but there are a few non-standard things it
-can cope with, allowing it to run on SunOS4 and other "close to standard"
-systems.
-
-In environments that support the facilities, config.h.in is converted by
-"configure", or config-cmake.h.in is converted by CMake, into config.h. If you
-are going to build PCRE "by hand" without using "configure" or CMake, you
-should copy the distributed config.h.generic to config.h, and then edit the
-macro definitions to be the way you need them. You must then add
--DHAVE_CONFIG_H to all of your compile commands, so that config.h is included
-at the start of every source.
-
-Alternatively, you can avoid editing by using -D on the compiler command line
-to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H.
-
-PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if
-HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set
-them both to 0; an emulation function will be used. */
-
-/* By default, the \R escape sequence matches any Unicode line ending
-   character or sequence of characters. If BSR_ANYCRLF is defined (to any
-   value), this is changed so that backslash-R matches only CR, LF, or CRLF.
-   The build-time default can be overridden by the user of PCRE at runtime. */
-#undef BSR_ANYCRLF
-
-/* If you are compiling for a system that uses EBCDIC instead of ASCII
-   character codes, define this macro to any value. You must also edit the
-   NEWLINE macro below to set a suitable EBCDIC newline, commonly 21 (0x15).
-   On systems that can use "configure" or CMake to set EBCDIC, NEWLINE is
-   automatically adjusted. When EBCDIC is set, PCRE assumes that all input
-   strings are in EBCDIC. If you do not define this macro, PCRE will assume
-   input strings are ASCII or UTF-8/16/32 Unicode. It is not possible to build
-   a version of PCRE that supports both EBCDIC and UTF-8/16/32. */
-#undef EBCDIC
-
-/* In an EBCDIC environment, define this macro to any value to arrange for the
-   NL character to be 0x25 instead of the default 0x15. NL plays the role that
-   LF does in an ASCII/Unicode environment. The value must also be set in the
-   NEWLINE macro below. On systems that can use "configure" or CMake to set
-   EBCDIC_NL25, the adjustment of NEWLINE is automatic. */
-#undef EBCDIC_NL25
-
-/* Define to 1 if you have the `bcopy' function. */
-#undef HAVE_BCOPY
-
-/* Define to 1 if you have the <bits/type_traits.h> header file. */
-#undef HAVE_BITS_TYPE_TRAITS_H
-
-/* Define to 1 if you have the <bzlib.h> header file. */
-#undef HAVE_BZLIB_H
-
-/* Define to 1 if you have the <dirent.h> header file. */
-#undef HAVE_DIRENT_H
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <editline/readline.h> header file. */
-#undef HAVE_EDITLINE_READLINE_H
-
-/* Define to 1 if you have the <edit/readline/readline.h> header file. */
-#undef HAVE_EDIT_READLINE_READLINE_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if the system has the type `long long'. */
-#undef HAVE_LONG_LONG
-
-/* Define to 1 if you have the `memmove' function. */
-#undef HAVE_MEMMOVE
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if you have POSIX threads libraries and header files. */
-#undef HAVE_PTHREAD
-
-/* Have PTHREAD_PRIO_INHERIT. */
-#undef HAVE_PTHREAD_PRIO_INHERIT
-
-/* Define to 1 if you have the <readline/history.h> header file. */
-#undef HAVE_READLINE_HISTORY_H
-
-/* Define to 1 if you have the <readline/readline.h> header file. */
-#undef HAVE_READLINE_READLINE_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strerror' function. */
-#undef HAVE_STRERROR
-
-/* Define to 1 if you have the <string> header file. */
-#undef HAVE_STRING
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have `strtoimax'. */
-#undef HAVE_STRTOIMAX
-
-/* Define to 1 if you have `strtoll'. */
-#undef HAVE_STRTOLL
-
-/* Define to 1 if you have `strtoq'. */
-#undef HAVE_STRTOQ
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <type_traits.h> header file. */
-#undef HAVE_TYPE_TRAITS_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if the system has the type `unsigned long long'. */
-#undef HAVE_UNSIGNED_LONG_LONG
-
-/* Define to 1 or 0, depending whether the compiler supports simple visibility
-   declarations. */
-#undef HAVE_VISIBILITY
-
-/* Define to 1 if you have the <windows.h> header file. */
-#undef HAVE_WINDOWS_H
-
-/* Define to 1 if you have the <zlib.h> header file. */
-#undef HAVE_ZLIB_H
-
-/* Define to 1 if you have `_strtoi64'. */
-#undef HAVE__STRTOI64
-
-/* The value of LINK_SIZE determines the number of bytes used to store links
-   as offsets within the compiled regex. The default is 2, which allows for
-   compiled patterns up to 64K long. This covers the vast majority of cases.
-   However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows
-   for longer patterns in extreme cases. */
-#undef LINK_SIZE
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* The value of MATCH_LIMIT determines the default number of times the
-   internal match() function can be called during a single execution of
-   pcre_exec(). There is a runtime interface for setting a different limit.
-   The limit exists in order to catch runaway regular expressions that take
-   for ever to determine that they do not match. The default is set very large
-   so that it does not accidentally catch legitimate cases. */
-#undef MATCH_LIMIT
-
-/* The above limit applies to all calls of match(), whether or not they
-   increase the recursion depth. In some environments it is desirable to limit
-   the depth of recursive calls of match() more strictly, in order to restrict
-   the maximum amount of stack (or heap, if NO_RECURSE is defined) that is
-   used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of
-   match(). To have any useful effect, it must be less than the value of
-   MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is
-   a runtime method for setting a different limit. */
-#undef MATCH_LIMIT_RECURSION
-
-/* This limit is parameterized just in case anybody ever wants to change it.
-   Care must be taken if it is increased, because it guards against integer
-   overflow caused by enormously large patterns. */
-#undef MAX_NAME_COUNT
-
-/* This limit is parameterized just in case anybody ever wants to change it.
-   Care must be taken if it is increased, because it guards against integer
-   overflow caused by enormously large patterns. */
-#undef MAX_NAME_SIZE
-
-/* The value of NEWLINE determines the default newline character sequence.
-   PCRE client programs can override this by selecting other values at run
-   time. In ASCII environments, the value can be 10 (LF), 13 (CR), or 3338
-   (CRLF); in EBCDIC environments the value can be 21 or 37 (LF), 13 (CR), or
-   3349 or 3365 (CRLF) because there are two alternative codepoints (0x15 and
-   0x25) that are used as the NL line terminator that is equivalent to ASCII
-   LF. In both ASCII and EBCDIC environments the value can also be -1 (ANY),
-   or -2 (ANYCRLF). */
-#undef NEWLINE
-
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
-/* PCRE uses recursive function calls to handle backtracking while matching.
-   This can sometimes be a problem on systems that have stacks of limited
-   size. Define NO_RECURSE to any value to get a version that doesn't use
-   recursion in the match() function; instead it creates its own stack by
-   steam using pcre_recurse_malloc() to obtain memory from the heap. For more
-   detail, see the comments and other stuff just above the match() function.
-   */
-#undef NO_RECURSE
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* to make a symbol visible */
-#undef PCRECPP_EXP_DECL
-
-/* to make a symbol visible */
-#undef PCRECPP_EXP_DEFN
-
-/* The value of PCREGREP_BUFSIZE determines the size of buffer used by
-   pcregrep to hold parts of the file it is searching. This is also the
-   minimum value. The actual amount of memory used by pcregrep is three times
-   this number, because it allows for the buffering of "before" and "after"
-   lines. */
-#undef PCREGREP_BUFSIZE
-
-/* to make a symbol visible */
-#undef PCREPOSIX_EXP_DECL
-
-/* to make a symbol visible */
-#undef PCREPOSIX_EXP_DEFN
-
-/* to make a symbol visible */
-#undef PCRE_EXP_DATA_DEFN
-
-/* to make a symbol visible */
-#undef PCRE_EXP_DECL
-
-
-/* If you are compiling for a system other than a Unix-like system or
-   Win32, and it needs some magic to be inserted before the definition
-   of a function that is exported by the library, define this macro to
-   contain the relevant magic. If you do not define this macro, a suitable
-    __declspec value is used for Windows systems; in other environments
-   "extern" is used for a C compiler and "extern C" for a C++ compiler.
-   This macro apears at the start of every exported function that is part
-   of the external API. It does not appear on functions that are "external"
-   in the C sense, but which are internal to the library. */
-#undef PCRE_EXP_DEFN
-
-/* Define to any value if linking statically (TODO: make nice with Libtool) */
-#undef PCRE_STATIC
-
-/* When calling PCRE via the POSIX interface, additional working storage is
-   required for holding the pointers to capturing substrings because PCRE
-   requires three integers per substring, whereas the POSIX interface provides
-   only two. If the number of expected substrings is small, the wrapper
-   function uses space on the stack, because this is faster than using
-   malloc() for each call. The threshold above which the stack is no longer
-   used is defined by POSIX_MALLOC_THRESHOLD. */
-#undef POSIX_MALLOC_THRESHOLD
-
-/* Define to necessary symbol if this constant uses a non-standard name on
-   your system. */
-#undef PTHREAD_CREATE_JOINABLE
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to allow pcretest and pcregrep to be linked with gcov, so that they
-   are able to generate code coverage reports. */
-#undef SUPPORT_GCOV
-
-/* Define to any value to enable support for Just-In-Time compiling. */
-#undef SUPPORT_JIT
-
-/* Define to any value to allow pcregrep to be linked with libbz2, so that it
-   is able to handle .bz2 files. */
-#undef SUPPORT_LIBBZ2
-
-/* Define to any value to allow pcretest to be linked with libedit. */
-#undef SUPPORT_LIBEDIT
-
-/* Define to any value to allow pcretest to be linked with libreadline. */
-#undef SUPPORT_LIBREADLINE
-
-/* Define to any value to allow pcregrep to be linked with libz, so that it is
-   able to handle .gz files. */
-#undef SUPPORT_LIBZ
-
-/* Define to any value to enable the 16 bit PCRE library. */
-#undef SUPPORT_PCRE16
-
-/* Define to any value to enable the 32 bit PCRE library. */
-#undef SUPPORT_PCRE32
-
-/* Define to any value to enable the 8 bit PCRE library. */
-#undef SUPPORT_PCRE8
-
-/* Define to any value to enable JIT support in pcregrep. */
-#undef SUPPORT_PCREGREP_JIT
-
-/* Define to any value to enable support for Unicode properties. */
-#undef SUPPORT_UCP
-
-/* Define to any value to enable support for the UTF-8/16/32 Unicode encoding.
-   This will work even in an EBCDIC environment, but it is incompatible with
-   the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or*
-   ASCII/UTF-8/16/32, but not both at once. */
-#undef SUPPORT_UTF
-
-/* Valgrind support to find invalid memory reads. */
-#undef SUPPORT_VALGRIND
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to the type of a signed integer type of width exactly 64 bits if
-   such a type exists and the standard includes do not define it. */
-#undef int64_t
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/config.sub

@@ -1,1804 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-08-18'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  android-linux)
-    os=-linux-android
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
-		os=
-		basic_machine=$1
-		;;
-	-bluegene*)
-		os=-cnk
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
-	-chorusrdb)
-		os=-chorusrdb
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*178)
-		os=-lynxos178
-		;;
-	-lynx*5)
-		os=-lynxos5
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| aarch64 | aarch64_be \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-        | be32 | be64 \
-	| bfin \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx | dvp \
-	| epiphany \
-	| fido | fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| hexagon \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| le32 | le64 \
-	| lm32 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64octeon | mips64octeonel \
-	| mips64orion | mips64orionel \
-	| mips64r5900 | mips64r5900el \
-	| mips64vr | mips64vrel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| moxie \
-	| mt \
-	| msp430 \
-	| nds32 | nds32le | nds32be \
-	| nios | nios2 \
-	| ns16k | ns32k \
-	| open8 \
-	| or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle \
-	| pyramid \
-	| rl78 | rx \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu \
-	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
-	| ubicom32 \
-	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| we32k \
-	| x86 | xc16x | xstormy16 | xtensa \
-	| z8k | z80)
-		basic_machine=$basic_machine-unknown
-		;;
-	c54x)
-		basic_machine=tic54x-unknown
-		;;
-	c55x)
-		basic_machine=tic55x-unknown
-		;;
-	c6x)
-		basic_machine=tic6x-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	strongarm | thumb | xscale)
-		basic_machine=arm-unknown
-		;;
-	xgate)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	xscaleeb)
-		basic_machine=armeb-unknown
-		;;
-
-	xscaleel)
-		basic_machine=armel-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| aarch64-* | aarch64_be-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| be32-* | be64-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| clipper-* | craynv-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| hexagon-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| le32-* | le64-* \
-	| lm32-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64octeon-* | mips64octeonel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64r5900-* | mips64r5900el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| open8-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
-	| pyramid-* \
-	| rl78-* | romp-* | rs6000-* | rx-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
-	| tahoe-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tile*-* \
-	| tron-* \
-	| ubicom32-* \
-	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
-	| vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* \
-	| xstormy16-* | xtensa*-* \
-	| ymp-* \
-	| z8k-* | z80-*)
-		;;
-	# Recognize the basic CPU types without company name, with glob match.
-	xtensa*)
-		basic_machine=$basic_machine-unknown
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	blackfin)
-		basic_machine=bfin-unknown
-		os=-linux
-		;;
-	blackfin-*)
-		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	bluegene*)
-		basic_machine=powerpc-ibm
-		os=-cnk
-		;;
-	c54x-*)
-		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c55x-*)
-		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c6x-*)
-		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16 | cr16-*)
-		basic_machine=cr16-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m68knommu)
-		basic_machine=m68k-unknown
-		os=-linux
-		;;
-	m68knommu-*)
-		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	microblaze)
-		basic_machine=microblaze-xilinx
-		;;
-	mingw64)
-		basic_machine=x86_64-pc
-		os=-mingw64
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	mingw32ce)
-		basic_machine=arm-unknown
-		os=-mingw32ce
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mipsEE* | ee | ps2)
-		basic_machine=mips64r5900el-scei
-		case $os in
-		    -linux*)
-			;;
-		    *)
-			os=-elf
-			;;
-		esac
-		;;
-	iop)
-		basic_machine=mipsel-scei
-		os=-irx
-		;;
-	dvp)
-		basic_machine=dvp-scei
-		os=-elf
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
-	msys)
-		basic_machine=i386-pc
-		os=-msys
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	nacl)
-		basic_machine=le32-unknown
-		os=-nacl
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	neo-tandem)
-		basic_machine=neo-tandem
-		;;
-	nse-tandem)
-		basic_machine=nse-tandem
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	parisc)
-		basic_machine=hppa-unknown
-		os=-linux
-		;;
-	parisc-*)
-		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=-linux
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc | ppcbe)	basic_machine=powerpc-unknown
-		;;
-	ppc-* | ppcbe-*)
-		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	strongarm-* | thumb-*)
-		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tile*)
-		basic_machine=$basic_machine-unknown
-		os=-linux-gnu
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	xscale-* | xscalee[bl]-*)
-		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-	# First match some system type aliases
-	# that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-auroraux)
-		os=-auroraux
-		;;
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -bitrig* | -openbsd* | -solidbsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -irx* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-	-os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-dicos*)
-		os=-dicos
-		;;
-	-nacl*)
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	score-*)
-		os=-elf
-		;;
-	spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-	c4x-* | tic4x-*)
-		os=-coff
-		;;
-	hexagon-*)
-		os=-elf
-		;;
-	tic54x-*)
-		os=-coff
-		;;
-	tic55x-*)
-		os=-coff
-		;;
-	tic6x-*)
-		os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-	mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-haiku)
-		os=-haiku
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-cnk*|-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End: