cybersource_rest_client 0.0.22 → 0.0.28

data/lib/cybersource_rest_client/models/riskv1decisions_travel_information_legs.rb

@@ -20,15 +20,19 @@ module CyberSource
     # Use to specify the airport code for the destination of the leg of the trip, which is designated by the pound (#) symbol in the field name. This code is usually three digits long, for example: SFO = San Francisco. Do not use the colon (:) or the dash (-). For airport codes, see [IATA Airline and Airport Code Search](https://www.iata.org/publications/Pages/code-search.aspx). The leg number can be a positive integer from 0 to N. For example:  `travelInformation.legs.0.destination=SFO` `travelInformation.legs.1.destination=SFO`  **Note** In your request, send either the complete route or the individual legs (`legs.0.origination` and `legs.n.destination`). If you send all the fields, the complete route takes precedence over the individual legs.  For details, see the `decision_manager_travel_leg#_dest` field description in _Decision Manager Using the SCMP API Developer Guide_ on the [CyberSource Business Center.](https://ebc2.cybersource.com/ebc2/) Click **Decision Manager** > **Documentation** > **Guides** > _Decision Manager Using the SCMP API Developer Guide_ (PDF link). 
     attr_accessor :destination
 
-    # Departure date and time for the each leg of the trip. Use one of the following formats: - `yyyy-MM-dd HH:mm z` - `yyyy-MM-dd hh:mm a z` - `yyyy-MM-dd hh:mma z`  Where:\\ `HH` = hour in 24-hour format\\ `hh` = hour in 12-hour format\\ `a` = am or pm (case insensitive)\\ `z` = time zone of the departing flight. For example, if the airline is based in city A, but the flight departs from city B, `z` is the time zone of city B at the time of departure.\\ **Important** For travel information, use GMT instead of UTC, or use the local time zone.  #### Examples  2011-03-20 11:30 PM PDT\\ 2011-03-20 11:30pm GMT\\ 2011-03-20 11:30pm GMT-05:00\\ Eastern Standard Time: GMT-05:00 or EST\\  **Note** When specifying an offset from GMT, the format must be exactly as specified in the example. Insert no spaces between the time zone and the offset. 
-    attr_accessor :departure_date_time
+    # International Air Transport Association (IATA) code for the carrier for this leg of the trip. Required for each leg. Required for American Express SafeKey (U.S.) for travel-related requests. 
+    attr_accessor :carrier_code
+
+    # Departure date for the first leg of the trip. Format: YYYYMMDD. Required for American Express SafeKey (U.S.) for travel-related requests. 
+    attr_accessor :departure_date
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
         :'origination' => :'origination',
         :'destination' => :'destination',
-        :'departure_date_time' => :'departureDateTime'
+        :'carrier_code' => :'carrierCode',
+        :'departure_date' => :'departureDate'
       }
     end
 
@@ -37,7 +41,8 @@ module CyberSource
       {
         :'origination' => :'String',
         :'destination' => :'String',
-        :'departure_date_time' => :'String'
+        :'carrier_code' => :'String',
+        :'departure_date' => :'String'
       }
     end
 
@@ -57,8 +62,12 @@ module CyberSource
         self.destination = attributes[:'destination']
       end
 
-      if attributes.has_key?(:'departureDateTime')
-        self.departure_date_time = attributes[:'departureDateTime']
+      if attributes.has_key?(:'carrierCode')
+        self.carrier_code = attributes[:'carrierCode']
+      end
+
+      if attributes.has_key?(:'departureDate')
+        self.departure_date = attributes[:'departureDate']
       end
     end
 
@@ -66,58 +75,31 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@origination.nil? && @origination.to_s.length > 3
-        invalid_properties.push('invalid value for "origination", the character length must be smaller than or equal to 3.')
-      end
-
-      if !@destination.nil? && @destination.to_s.length > 3
-        invalid_properties.push('invalid value for "destination", the character length must be smaller than or equal to 3.')
-      end
-
-      if !@departure_date_time.nil? && @departure_date_time.to_s.length > 25
-        invalid_properties.push('invalid value for "departure_date_time", the character length must be smaller than or equal to 25.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@origination.nil? && @origination.to_s.length > 3
-      return false if !@destination.nil? && @destination.to_s.length > 3
-      return false if !@departure_date_time.nil? && @departure_date_time.to_s.length > 25
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] origination Value to be assigned
     def origination=(origination)
-      if !origination.nil? && origination.to_s.length > 3
-        fail ArgumentError, 'invalid value for "origination", the character length must be smaller than or equal to 3.'
-      end
-
       @origination = origination
     end
 
     # Custom attribute writer method with validation
     # @param [Object] destination Value to be assigned
     def destination=(destination)
-      if !destination.nil? && destination.to_s.length > 3
-        fail ArgumentError, 'invalid value for "destination", the character length must be smaller than or equal to 3.'
-      end
-
       @destination = destination
     end
 
     # Custom attribute writer method with validation
-    # @param [Object] departure_date_time Value to be assigned
-    def departure_date_time=(departure_date_time)
-      if !departure_date_time.nil? && departure_date_time.to_s.length > 25
-        fail ArgumentError, 'invalid value for "departure_date_time", the character length must be smaller than or equal to 25.'
-      end
-
-      @departure_date_time = departure_date_time
+    # @param [Object] carrier_code Value to be assigned
+    def carrier_code=(carrier_code)
+      @carrier_code = carrier_code
     end
 
     # Checks equality by comparing each attribute.
@@ -127,7 +109,8 @@ module CyberSource
       self.class == o.class &&
           origination == o.origination &&
           destination == o.destination &&
-          departure_date_time == o.departure_date_time
+          carrier_code == o.carrier_code &&
+          departure_date == o.departure_date
     end
 
     # @see the `==` method
@@ -139,7 +122,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [origination, destination, departure_date_time].hash
+      [origination, destination, carrier_code, departure_date].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/{riskv1authentications_travel_information_passengers.rb → riskv1decisions_travel_information_passengers.rb}

@@ -13,7 +13,7 @@ Swagger Codegen version: 2.2.3
 require 'date'
 
 module CyberSource
-  class Riskv1authenticationsTravelInformationPassengers
+  class Riskv1decisionsTravelInformationPassengers
     # First name of the passenger to whom the ticket was issued. If there are multiple passengers, include all listed on the ticket. Do not include special characters such as commas, hyphens, or apostrophes. Only ASCII characters are supported. Required for American Express SafeKey (U.S.) for travel-related requests. 
     attr_accessor :first_name
 
@@ -57,42 +57,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@first_name.nil? && @first_name.to_s.length > 60
-        invalid_properties.push('invalid value for "first_name", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@last_name.nil? && @last_name.to_s.length > 60
-        invalid_properties.push('invalid value for "last_name", the character length must be smaller than or equal to 60.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@first_name.nil? && @first_name.to_s.length > 60
-      return false if !@last_name.nil? && @last_name.to_s.length > 60
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] first_name Value to be assigned
     def first_name=(first_name)
-      if !first_name.nil? && first_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "first_name", the character length must be smaller than or equal to 60.'
-      end
-
       @first_name = first_name
     end
 
     # Custom attribute writer method with validation
     # @param [Object] last_name Value to be assigned
     def last_name=(last_name)
-      if !last_name.nil? && last_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "last_name", the character length must be smaller than or equal to 60.'
-      end
-
       @last_name = last_name
     end
 

data/lib/cybersource_rest_client/models/riskv1decisionsidmarking_risk_information_marking_details.rb

@@ -78,42 +78,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@notes.nil? && @notes.to_s.length > 120
-        invalid_properties.push('invalid value for "notes", the character length must be smaller than or equal to 120.')
-      end
-
-      if !@reason.nil? && @reason.to_s.length > 25
-        invalid_properties.push('invalid value for "reason", the character length must be smaller than or equal to 25.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@notes.nil? && @notes.to_s.length > 120
-      return false if !@reason.nil? && @reason.to_s.length > 25
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] notes Value to be assigned
     def notes=(notes)
-      if !notes.nil? && notes.to_s.length > 120
-        fail ArgumentError, 'invalid value for "notes", the character length must be smaller than or equal to 120.'
-      end
-
       @notes = notes
     end
 
     # Custom attribute writer method with validation
     # @param [Object] reason Value to be assigned
     def reason=(reason)
-      if !reason.nil? && reason.to_s.length > 25
-        fail ArgumentError, 'invalid value for "reason", the character length must be smaller than or equal to 25.'
-      end
-
       @reason = reason
     end
 

data/lib/cybersource_rest_client/models/riskv1exportcomplianceinquiries_device_information.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class Riskv1exportcomplianceinquiriesDeviceInformation
-    # IP address of the customer. 
+    # IP address of the customer.  #### Used by **Authorization, Capture, and Credit** Optional field. 
     attr_accessor :ip_address
 
     # DNS resolved hostname from `ipAddress`.
@@ -57,42 +57,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@ip_address.nil? && @ip_address.to_s.length > 48
-        invalid_properties.push('invalid value for "ip_address", the character length must be smaller than or equal to 48.')
-      end
-
-      if !@host_name.nil? && @host_name.to_s.length > 60
-        invalid_properties.push('invalid value for "host_name", the character length must be smaller than or equal to 60.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@ip_address.nil? && @ip_address.to_s.length > 48
-      return false if !@host_name.nil? && @host_name.to_s.length > 60
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] ip_address Value to be assigned
     def ip_address=(ip_address)
-      if !ip_address.nil? && ip_address.to_s.length > 48
-        fail ArgumentError, 'invalid value for "ip_address", the character length must be smaller than or equal to 48.'
-      end
-
       @ip_address = ip_address
     end
 
     # Custom attribute writer method with validation
     # @param [Object] host_name Value to be assigned
     def host_name=(host_name)
-      if !host_name.nil? && host_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "host_name", the character length must be smaller than or equal to 60.'
-      end
-
       @host_name = host_name
     end
 

data/lib/cybersource_rest_client/models/riskv1exportcomplianceinquiries_export_compliance_information_weights.rb

@@ -66,57 +66,30 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@address.nil? && @address.to_s.length > 6
-        invalid_properties.push('invalid value for "address", the character length must be smaller than or equal to 6.')
-      end
-
-      if !@company.nil? && @company.to_s.length > 6
-        invalid_properties.push('invalid value for "company", the character length must be smaller than or equal to 6.')
-      end
-
-      if !@name.nil? && @name.to_s.length > 6
-        invalid_properties.push('invalid value for "name", the character length must be smaller than or equal to 6.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@address.nil? && @address.to_s.length > 6
-      return false if !@company.nil? && @company.to_s.length > 6
-      return false if !@name.nil? && @name.to_s.length > 6
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address Value to be assigned
     def address=(address)
-      if !address.nil? && address.to_s.length > 6
-        fail ArgumentError, 'invalid value for "address", the character length must be smaller than or equal to 6.'
-      end
-
       @address = address
     end
 
     # Custom attribute writer method with validation
     # @param [Object] company Value to be assigned
     def company=(company)
-      if !company.nil? && company.to_s.length > 6
-        fail ArgumentError, 'invalid value for "company", the character length must be smaller than or equal to 6.'
-      end
-
       @company = company
     end
 
     # Custom attribute writer method with validation
     # @param [Object] name Value to be assigned
     def name=(name)
-      if !name.nil? && name.to_s.length > 6
-        fail ArgumentError, 'invalid value for "name", the character length must be smaller than or equal to 6.'
-      end
-
       @name = name
     end
 

data/lib/cybersource_rest_client/models/riskv1exportcomplianceinquiries_order_information_bill_to.rb

@@ -14,10 +14,10 @@ require 'date'
 
 module CyberSource
   class Riskv1exportcomplianceinquiriesOrderInformationBillTo
-    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_address1` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate orderInformation.billTo.address1 and orderInformation.billTo.address2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville When the street name is numeric, it must be sent in numeric format. For example, if the address is _One First Street_, it must be sent as _1 1st Street_.  Required if keyed; not used if swiped.  String (20)  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional. String (60)  #### For Payouts This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
     attr_accessor :address1
 
-    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_address2` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Used for additional address information. For example: _Attention: Accounts Payable_ Optional field.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate `orderInformation.billTo.address1` and `orderInformation.billTo.address2`, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### FDMS Nashville `orderInformation.billTo.address1` and `orderInformation.billTo.address2` together cannot exceed 20 characters. String (20)  #### All Other Processors String (60) 
     attr_accessor :address2
 
     # Additional address information (third line of the billing address) 
@@ -26,27 +26,27 @@ module CyberSource
     # Additional address information (fourth line of the billing address) 
     attr_accessor :address4
 
-    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_state` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # State or province of the billing address. Use the [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :administrative_area
 
-    # Payment card billing country. Use the two-character ISO Standard Country Codes.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_country` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing country. Use the two-character [ISO Standard Country Codes](http://apps.cybersource.com/library/documentation/sbc/quickref/countries_alpha_list.pdf).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :country
 
-    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the `bill_city` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :locality
 
-    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_zip` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 
     attr_accessor :postal_code
 
     attr_accessor :company
 
-    # Customer’s first name. This name must be the same as the name on the card.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called _CyberSource Latin American Processing_. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_firstname` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Customer’s first name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called _CyberSource Latin American Processing_. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :first_name
 
-    # Customer’s last name. This name must be the same as the name on the card.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the `customer_lastname` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Customer’s last name. This name must be the same as the name on the card.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### CyberSource Latin American Processing **Important** For an authorization request, CyberSource Latin American Processing concatenates `orderInformation.billTo.firstName` and `orderInformation.billTo.lastName`. If the concatenated value exceeds 30 characters, CyberSource Latin American Processing declines the authorization request.\\ **Note** CyberSource Latin American Processing is the name of a specific processing connection that CyberSource supports. In the CyberSource API documentation, CyberSource Latin American Processing does not refer to the general topic of processing in Latin America. The information in this field description is for the specific processing connection called CyberSource Latin American Processing. It is not for any other Latin American processors that CyberSource supports.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### OmniPay Direct Optional field.  #### RBS WorldPay Atlanta Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :last_name
 
-    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link. 
+    # Customer's email address, including the full domain name.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `customer_email` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html)  #### Invoicing Email address for the customer for sending the invoice. If the invoice is in SENT status and email is updated, the old email customer payment link won't work and you must resend the invoice with the new payment link.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :email
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -150,66 +150,22 @@ module CyberSource
         invalid_properties.push('invalid value for "address1", address1 cannot be nil.')
       end
 
-      if @address1.to_s.length > 60
-        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address2.nil? && @address2.to_s.length > 60
-        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address3.nil? && @address3.to_s.length > 60
-        invalid_properties.push('invalid value for "address3", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address4.nil? && @address4.to_s.length > 60
-        invalid_properties.push('invalid value for "address4", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@administrative_area.nil? && @administrative_area.to_s.length > 20
-        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 20.')
-      end
-
       if @country.nil?
         invalid_properties.push('invalid value for "country", country cannot be nil.')
       end
 
-      if @country.to_s.length > 2
-        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
-      end
-
       if @locality.nil?
         invalid_properties.push('invalid value for "locality", locality cannot be nil.')
       end
 
-      if @locality.to_s.length > 50
-        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 50.')
-      end
-
       if @postal_code.nil?
         invalid_properties.push('invalid value for "postal_code", postal_code cannot be nil.')
       end
 
-      if @postal_code.to_s.length > 10
-        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
-      end
-
-      if !@first_name.nil? && @first_name.to_s.length > 60
-        invalid_properties.push('invalid value for "first_name", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@last_name.nil? && @last_name.to_s.length > 60
-        invalid_properties.push('invalid value for "last_name", the character length must be smaller than or equal to 60.')
-      end
-
       if @email.nil?
         invalid_properties.push('invalid value for "email", email cannot be nil.')
       end
 
-      if @email.to_s.length > 255
-        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 255.')
-      end
-
       invalid_properties
     end
 
@@ -217,21 +173,10 @@ module CyberSource
     # @return true if the model is valid
     def valid?
       return false if @address1.nil?
-      return false if @address1.to_s.length > 60
-      return false if !@address2.nil? && @address2.to_s.length > 60
-      return false if !@address3.nil? && @address3.to_s.length > 60
-      return false if !@address4.nil? && @address4.to_s.length > 60
-      return false if !@administrative_area.nil? && @administrative_area.to_s.length > 20
       return false if @country.nil?
-      return false if @country.to_s.length > 2
       return false if @locality.nil?
-      return false if @locality.to_s.length > 50
       return false if @postal_code.nil?
-      return false if @postal_code.to_s.length > 10
-      return false if !@first_name.nil? && @first_name.to_s.length > 60
-      return false if !@last_name.nil? && @last_name.to_s.length > 60
       return false if @email.nil?
-      return false if @email.to_s.length > 255
       true
     end
 
@@ -242,50 +187,30 @@ module CyberSource
         fail ArgumentError, 'address1 cannot be nil'
       end
 
-      if address1.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 60.'
-      end
-
       @address1 = address1
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address2 Value to be assigned
     def address2=(address2)
-      if !address2.nil? && address2.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 60.'
-      end
-
       @address2 = address2
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address3 Value to be assigned
     def address3=(address3)
-      if !address3.nil? && address3.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address3", the character length must be smaller than or equal to 60.'
-      end
-
       @address3 = address3
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address4 Value to be assigned
     def address4=(address4)
-      if !address4.nil? && address4.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address4", the character length must be smaller than or equal to 60.'
-      end
-
       @address4 = address4
     end
 
     # Custom attribute writer method with validation
     # @param [Object] administrative_area Value to be assigned
     def administrative_area=(administrative_area)
-      if !administrative_area.nil? && administrative_area.to_s.length > 20
-        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 20.'
-      end
-
       @administrative_area = administrative_area
     end
 
@@ -296,10 +221,6 @@ module CyberSource
         fail ArgumentError, 'country cannot be nil'
       end
 
-      if country.to_s.length > 2
-        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
-      end
-
       @country = country
     end
 
@@ -310,10 +231,6 @@ module CyberSource
         fail ArgumentError, 'locality cannot be nil'
       end
 
-      if locality.to_s.length > 50
-        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 50.'
-      end
-
       @locality = locality
     end
 
@@ -324,30 +241,18 @@ module CyberSource
         fail ArgumentError, 'postal_code cannot be nil'
       end
 
-      if postal_code.to_s.length > 10
-        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
-      end
-
       @postal_code = postal_code
     end
 
     # Custom attribute writer method with validation
     # @param [Object] first_name Value to be assigned
     def first_name=(first_name)
-      if !first_name.nil? && first_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "first_name", the character length must be smaller than or equal to 60.'
-      end
-
       @first_name = first_name
     end
 
     # Custom attribute writer method with validation
     # @param [Object] last_name Value to be assigned
     def last_name=(last_name)
-      if !last_name.nil? && last_name.to_s.length > 60
-        fail ArgumentError, 'invalid value for "last_name", the character length must be smaller than or equal to 60.'
-      end
-
       @last_name = last_name
     end
 
@@ -358,10 +263,6 @@ module CyberSource
         fail ArgumentError, 'email cannot be nil'
       end
 
-      if email.to_s.length > 255
-        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 255.'
-      end
-
       @email = email
     end