cybersource_rest_client 0.0.22 → 0.0.28

data/lib/cybersource_rest_client/models/risk_v1_export_compliance_inquiries_post201_response.rb

@@ -16,10 +16,10 @@ module CyberSource
   class RiskV1ExportComplianceInquiriesPost201Response
     attr_accessor :_links
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # Time that the transaction was submitted in local time.
@@ -28,9 +28,6 @@ module CyberSource
     # The status for the call can be: - COMPLETED - INVALID_REQUEST - DECLINED 
     attr_accessor :status
 
-    # The reason of the status. Value can be   - CUSTOMER_WATCHLIST_MATCH   - ADDRESS_COUNTRY_WATCHLIST_MATCH   - EMAIL_COUNTRY_WATCHLIST_MATCH   - IP_COUNTRY_WATCHLIST_MATCH 
-    attr_accessor :reason
-
     # The message describing the reason of the status. Value can be   - The customer matched the Denied Parties List   - The Export bill_country/ship_country  match   - Export email_country match   - Export hostname_country/ip_country match 
     attr_accessor :message
 
@@ -48,7 +45,6 @@ module CyberSource
         :'submit_time_utc' => :'submitTimeUtc',
         :'submit_time_local' => :'submitTimeLocal',
         :'status' => :'status',
-        :'reason' => :'reason',
         :'message' => :'message',
         :'client_reference_information' => :'clientReferenceInformation',
         :'export_compliance_information' => :'exportComplianceInformation',
@@ -64,11 +60,10 @@ module CyberSource
         :'submit_time_utc' => :'String',
         :'submit_time_local' => :'String',
         :'status' => :'String',
-        :'reason' => :'String',
         :'message' => :'String',
-        :'client_reference_information' => :'PtsV2IncrementalAuthorizationPatch201ResponseClientReferenceInformation',
+        :'client_reference_information' => :'RiskV1DecisionsPost201ResponseClientReferenceInformation',
         :'export_compliance_information' => :'RiskV1ExportComplianceInquiriesPost201ResponseExportComplianceInformation',
-        :'error_information' => :'PtsV2PaymentsPost201ResponseErrorInformation'
+        :'error_information' => :'RiskV1ExportComplianceInquiriesPost201ResponseErrorInformation'
       }
     end
 
@@ -100,10 +95,6 @@ module CyberSource
         self.status = attributes[:'status']
       end
 
-      if attributes.has_key?(:'reason')
-        self.reason = attributes[:'reason']
-      end
-
       if attributes.has_key?(:'message')
         self.message = attributes[:'message']
       end
@@ -125,27 +116,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] id Value to be assigned
     def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
       @id = id
     end
 
@@ -159,7 +141,6 @@ module CyberSource
           submit_time_utc == o.submit_time_utc &&
           submit_time_local == o.submit_time_local &&
           status == o.status &&
-          reason == o.reason &&
           message == o.message &&
           client_reference_information == o.client_reference_information &&
           export_compliance_information == o.export_compliance_information &&
@@ -175,7 +156,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [_links, id, submit_time_utc, submit_time_local, status, reason, message, client_reference_information, export_compliance_information, error_information].hash
+      [_links, id, submit_time_utc, submit_time_local, status, message, client_reference_information, export_compliance_information, error_information].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/risk_v1_export_compliance_inquiries_post201_response_error_information.rb

@@ -0,0 +1,205 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class RiskV1ExportComplianceInquiriesPost201ResponseErrorInformation
+    # The reason of the status. Value can be   - `CUSTOMER_WATCHLIST_MATCH`   - `ADDRESS_COUNTRY_WATCHLIST_MATCH`   - `EMAIL_COUNTRY_WATCHLIST_MATCH`   - `IP_COUNTRY_WATCHLIST_MATCH`   - `INVALID_MERCHANT_CONFIGURATION` 
+    attr_accessor :reason
+
+    # The detail message related to the status and reason listed above.
+    attr_accessor :message
+
+    attr_accessor :details
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'reason' => :'reason',
+        :'message' => :'message',
+        :'details' => :'details'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'reason' => :'String',
+        :'message' => :'String',
+        :'details' => :'Array<PtsV2PaymentsPost201ResponseErrorInformationDetails>'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'reason')
+        self.reason = attributes[:'reason']
+      end
+
+      if attributes.has_key?(:'message')
+        self.message = attributes[:'message']
+      end
+
+      if attributes.has_key?(:'details')
+        if (value = attributes[:'details']).is_a?(Array)
+          self.details = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          reason == o.reason &&
+          message == o.message &&
+          details == o.details
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [reason, message, details].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end

data/lib/cybersource_rest_client/models/risk_v1_export_compliance_inquiries_post201_response_watch_list_matches.rb

@@ -81,27 +81,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@sanction_list.nil? && @sanction_list.to_s.length > 255
-        invalid_properties.push('invalid value for "sanction_list", the character length must be smaller than or equal to 255.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@sanction_list.nil? && @sanction_list.to_s.length > 255
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] sanction_list Value to be assigned
     def sanction_list=(sanction_list)
-      if !sanction_list.nil? && sanction_list.to_s.length > 255
-        fail ArgumentError, 'invalid value for "sanction_list", the character length must be smaller than or equal to 255.'
-      end
-
       @sanction_list = sanction_list
     end
 

data/lib/cybersource_rest_client/models/risk_v1_update_post201_response.rb

@@ -18,13 +18,13 @@ module CyberSource
 
     attr_accessor :client_reference_informaton
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
     # The status for risk update 201 calls. Possible values are: - INVALID_REQUEST - COMPLETED 
     attr_accessor :status
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -42,7 +42,7 @@ module CyberSource
     def self.swagger_types
       {
         :'_links' => :'PtsV2IncrementalAuthorizationPatch201ResponseLinks',
-        :'client_reference_informaton' => :'PtsV2IncrementalAuthorizationPatch201ResponseClientReferenceInformation',
+        :'client_reference_informaton' => :'RiskV1DecisionsPost201ResponseClientReferenceInformation',
         :'id' => :'String',
         :'status' => :'String',
         :'submit_time_utc' => :'String'
@@ -82,27 +82,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] id Value to be assigned
     def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
       @id = id
     end
 

data/lib/cybersource_rest_client/models/riskv1addressverifications_buyer_information.rb

@@ -48,27 +48,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@merchant_customer_id.nil? && @merchant_customer_id.to_s.length > 100
-        invalid_properties.push('invalid value for "merchant_customer_id", the character length must be smaller than or equal to 100.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@merchant_customer_id.nil? && @merchant_customer_id.to_s.length > 100
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] merchant_customer_id Value to be assigned
     def merchant_customer_id=(merchant_customer_id)
-      if !merchant_customer_id.nil? && merchant_customer_id.to_s.length > 100
-        fail ArgumentError, 'invalid value for "merchant_customer_id", the character length must be smaller than or equal to 100.'
-      end
-
       @merchant_customer_id = merchant_customer_id
     end
 

data/lib/cybersource_rest_client/models/riskv1addressverifications_order_information_bill_to.rb

@@ -14,10 +14,10 @@ require 'date'
 
 module CyberSource
   class Riskv1addressverificationsOrderInformationBillTo
-    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_address1` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing street address as it appears on the credit card issuer’s records.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate orderInformation.billTo.address1 and orderInformation.billTo.address2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville When the street name is numeric, it must be sent in numeric format. For example, if the address is _One First Street_, it must be sent as _1 1st Street_.  Required if keyed; not used if swiped.  String (20)  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional. String (60)  #### For Payouts This field may be sent only for FDC Compass.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
     attr_accessor :address1
 
-    # Additional address information.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### CyberSource through VisaNet **Important** When you populate billing street address 1 and billing street address 2, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_address2` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Used for additional address information. For example: _Attention: Accounts Payable_ Optional field.  For Payouts: This field may be sent only for FDC Compass.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet **Important** When you populate `orderInformation.billTo.address1` and `orderInformation.billTo.address2`, CyberSource through VisaNet concatenates the two values. If the concatenated value exceeds 40 characters, CyberSource through VisaNet truncates the value at 40 characters before sending it to Visa and the issuing bank. Truncating this value affects AVS results and therefore might also affect risk decisions and chargebacks. Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### Chase Paymentech Solutions, FDC Compass, and TSYS Acquiring Solutions This value is used for AVS.  #### FDMS Nashville `orderInformation.billTo.address1` and `orderInformation.billTo.address2` together cannot exceed 20 characters. String (20)  #### All Other Processors String (60) 
     attr_accessor :address2
 
     # Additional address information (third line of the billing address) 
@@ -26,16 +26,16 @@ module CyberSource
     # Additional address information (fourth line of the billing address) 
     attr_accessor :address4
 
-    # State or province of the billing address. Use the State, Province, and Territory Codes for the United States and Canada.  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_state` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # State or province of the billing address. Use the [State, Province, and Territory Codes for the United States and Canada](https://developer.cybersource.com/library/documentation/sbc/quickref/states_and_provinces.pdf).  For Payouts: This field may be sent only for FDC Compass.  ##### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :administrative_area
 
-    # Payment card billing country. Use the two-character ISO Standard Country Codes.  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  For processor-specific information, see the `bill_country` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing country. Use the two-character [ISO Standard Country Codes](http://apps.cybersource.com/library/documentation/sbc/quickref/countries_alpha_list.pdf).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :country
 
-    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  For processor-specific information, see the `bill_city` field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Payment card billing city.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### For Payouts: This field may be sent only for FDC Compass.  #### Chase Paymentech Solutions Optional field.  ####  Credit Mutuel-CIC Optional field.  #### OmniPay Direct Optional field.  #### SIX Optional field.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### Worldpay VAP Optional field.  #### All other processors Not used. 
     attr_accessor :locality
 
-    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  For processor-specific information, see the `bill_zip` request-level field description in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Postal code for the billing address. The postal code must consist of 5 to 9 digits.  When the billing country is the U.S., the 9-digit postal code must follow this format: [5 digits][dash][4 digits]  **Example** `12345-6789`  When the billing country is Canada, the 6-digit postal code must follow this format: [alpha][numeric][alpha][space][numeric][alpha][numeric]  **Example** `A1B 2C3`  **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### For Payouts:  This field may be sent only for FDC Compass.  #### American Express Direct Before sending the postal code to the processor, CyberSource removes all nonalphanumeric characters and, if the remaining value is longer than nine characters, truncates the value starting from the right side.  #### Atos This field must not contain colons (:).  #### CyberSource through VisaNet Credit card networks cannot process transactions that contain non-ASCII characters. CyberSource through VisaNet accepts and stores non-ASCII characters correctly and displays them correctly in reports. However, the limitations of the credit card networks prevent CyberSource through VisaNet from transmitting non-ASCII characters to the credit card networks. Therefore, CyberSource through VisaNet replaces non-ASCII characters with meaningless ASCII characters for transmission to the credit card networks.  #### FDMS Nashville Required if `pointOfSaleInformation.entryMode=keyed` and the address is in the U.S. or Canada. Optional if `pointOfSaleInformation.entryMode=keyed` and the address is **not** in the U.S. or Canada. Not used if swiped.  #### RBS WorldPay Atlanta: For best card-present keyed rates, send the postal code if `pointOfSaleInformation.entryMode=keyed`.  #### TSYS Acquiring Solutions Required when `processingInformation.billPaymentOptions.billPayment=true` and `pointOfSaleInformation.entryMode=keyed`.  #### All other processors: Optional field. 
     attr_accessor :postal_code
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -115,50 +115,18 @@ module CyberSource
         invalid_properties.push('invalid value for "address1", address1 cannot be nil.')
       end
 
-      if @address1.to_s.length > 60
-        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address2.nil? && @address2.to_s.length > 60
-        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address3.nil? && @address3.to_s.length > 60
-        invalid_properties.push('invalid value for "address3", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@address4.nil? && @address4.to_s.length > 60
-        invalid_properties.push('invalid value for "address4", the character length must be smaller than or equal to 60.')
-      end
-
-      if !@administrative_area.nil? && @administrative_area.to_s.length > 20
-        invalid_properties.push('invalid value for "administrative_area", the character length must be smaller than or equal to 20.')
-      end
-
       if @country.nil?
         invalid_properties.push('invalid value for "country", country cannot be nil.')
       end
 
-      if @country.to_s.length > 2
-        invalid_properties.push('invalid value for "country", the character length must be smaller than or equal to 2.')
-      end
-
       if @locality.nil?
         invalid_properties.push('invalid value for "locality", locality cannot be nil.')
       end
 
-      if @locality.to_s.length > 50
-        invalid_properties.push('invalid value for "locality", the character length must be smaller than or equal to 50.')
-      end
-
       if @postal_code.nil?
         invalid_properties.push('invalid value for "postal_code", postal_code cannot be nil.')
       end
 
-      if @postal_code.to_s.length > 10
-        invalid_properties.push('invalid value for "postal_code", the character length must be smaller than or equal to 10.')
-      end
-
       invalid_properties
     end
 
@@ -166,17 +134,9 @@ module CyberSource
     # @return true if the model is valid
     def valid?
       return false if @address1.nil?
-      return false if @address1.to_s.length > 60
-      return false if !@address2.nil? && @address2.to_s.length > 60
-      return false if !@address3.nil? && @address3.to_s.length > 60
-      return false if !@address4.nil? && @address4.to_s.length > 60
-      return false if !@administrative_area.nil? && @administrative_area.to_s.length > 20
       return false if @country.nil?
-      return false if @country.to_s.length > 2
       return false if @locality.nil?
-      return false if @locality.to_s.length > 50
       return false if @postal_code.nil?
-      return false if @postal_code.to_s.length > 10
       true
     end
 
@@ -187,50 +147,30 @@ module CyberSource
         fail ArgumentError, 'address1 cannot be nil'
       end
 
-      if address1.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 60.'
-      end
-
       @address1 = address1
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address2 Value to be assigned
     def address2=(address2)
-      if !address2.nil? && address2.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 60.'
-      end
-
       @address2 = address2
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address3 Value to be assigned
     def address3=(address3)
-      if !address3.nil? && address3.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address3", the character length must be smaller than or equal to 60.'
-      end
-
       @address3 = address3
     end
 
     # Custom attribute writer method with validation
     # @param [Object] address4 Value to be assigned
     def address4=(address4)
-      if !address4.nil? && address4.to_s.length > 60
-        fail ArgumentError, 'invalid value for "address4", the character length must be smaller than or equal to 60.'
-      end
-
       @address4 = address4
     end
 
     # Custom attribute writer method with validation
     # @param [Object] administrative_area Value to be assigned
     def administrative_area=(administrative_area)
-      if !administrative_area.nil? && administrative_area.to_s.length > 20
-        fail ArgumentError, 'invalid value for "administrative_area", the character length must be smaller than or equal to 20.'
-      end
-
       @administrative_area = administrative_area
     end
 
@@ -241,10 +181,6 @@ module CyberSource
         fail ArgumentError, 'country cannot be nil'
       end
 
-      if country.to_s.length > 2
-        fail ArgumentError, 'invalid value for "country", the character length must be smaller than or equal to 2.'
-      end
-
       @country = country
     end
 
@@ -255,10 +191,6 @@ module CyberSource
         fail ArgumentError, 'locality cannot be nil'
       end
 
-      if locality.to_s.length > 50
-        fail ArgumentError, 'invalid value for "locality", the character length must be smaller than or equal to 50.'
-      end
-
       @locality = locality
     end
 
@@ -269,10 +201,6 @@ module CyberSource
         fail ArgumentError, 'postal_code cannot be nil'
       end
 
-      if postal_code.to_s.length > 10
-        fail ArgumentError, 'invalid value for "postal_code", the character length must be smaller than or equal to 10.'
-      end
-
       @postal_code = postal_code
     end