cybersource_rest_client 0.0.22 → 0.0.28

data/lib/cybersource_rest_client/models/riskv1authentications_payment_information_tokenized_card.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class Riskv1authenticationsPaymentInformationTokenizedCard
-    # Three-digit value that indicates the card type.  Type of card to authorize. - 001 Visa - 002 Mastercard - 003 Amex - 004 Discover - 005: Diners Club - 007: JCB - 024: Maestro (UK Domestic) - 036: Cartes Bancaires - 039 Encoded account number - 042: Maestro (International)  For the complete list of possible values, see `card_type` field description in the [Credit Card Services Using the SCMP API Guide.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
+    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
     attr_accessor :type
 
     # One of two possible meanings: - The two-digit month in which a token expires. - The two-digit month in which a card expires. Format: `MM` Possible values: `01` through `12`  **NOTE** The meaning of this field is dependent on the payment processor that is returning the value in an authorization reply. Please see the processor-specific details below.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`01` through `12`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (`card_type=039`), if there is no expiration date on the card, use `12`.\\ **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### Samsung Pay and Apple Pay Month in which the token expires. CyberSource includes this field in the reply message when it decrypts the payment blob for the tokenized transaction.  For processor-specific information, see the `customer_cc_expmo` field in [Credit Card Services Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html) 
@@ -83,26 +83,14 @@ module CyberSource
         invalid_properties.push('invalid value for "expiration_month", expiration_month cannot be nil.')
       end
 
-      if @expiration_month.to_s.length > 2
-        invalid_properties.push('invalid value for "expiration_month", the character length must be smaller than or equal to 2.')
-      end
-
       if @expiration_year.nil?
         invalid_properties.push('invalid value for "expiration_year", expiration_year cannot be nil.')
       end
 
-      if @expiration_year.to_s.length > 4
-        invalid_properties.push('invalid value for "expiration_year", the character length must be smaller than or equal to 4.')
-      end
-
       if @number.nil?
         invalid_properties.push('invalid value for "number", number cannot be nil.')
       end
 
-      if @number.to_s.length > 20
-        invalid_properties.push('invalid value for "number", the character length must be smaller than or equal to 20.')
-      end
-
       invalid_properties
     end
 
@@ -111,11 +99,8 @@ module CyberSource
     def valid?
       return false if @type.nil?
       return false if @expiration_month.nil?
-      return false if @expiration_month.to_s.length > 2
       return false if @expiration_year.nil?
-      return false if @expiration_year.to_s.length > 4
       return false if @number.nil?
-      return false if @number.to_s.length > 20
       true
     end
 
@@ -126,10 +111,6 @@ module CyberSource
         fail ArgumentError, 'expiration_month cannot be nil'
       end
 
-      if expiration_month.to_s.length > 2
-        fail ArgumentError, 'invalid value for "expiration_month", the character length must be smaller than or equal to 2.'
-      end
-
       @expiration_month = expiration_month
     end
 
@@ -140,10 +121,6 @@ module CyberSource
         fail ArgumentError, 'expiration_year cannot be nil'
       end
 
-      if expiration_year.to_s.length > 4
-        fail ArgumentError, 'invalid value for "expiration_year", the character length must be smaller than or equal to 4.'
-      end
-
       @expiration_year = expiration_year
     end
 
@@ -154,10 +131,6 @@ module CyberSource
         fail ArgumentError, 'number cannot be nil'
       end
 
-      if number.to_s.length > 20
-        fail ArgumentError, 'invalid value for "number", the character length must be smaller than or equal to 20.'
-      end
-
       @number = number
     end
 

data/lib/cybersource_rest_client/models/riskv1authentications_travel_information.rb

@@ -33,9 +33,9 @@ module CyberSource
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'legs' => :'Array<Riskv1authenticationsTravelInformationLegs>',
+        :'legs' => :'Array<Riskv1decisionsTravelInformationLegs>',
         :'number_of_passengers' => :'Integer',
-        :'passengers' => :'Array<Riskv1authenticationsTravelInformationPassengers>'
+        :'passengers' => :'Array<Riskv1decisionsTravelInformationPassengers>'
       }
     end
 

data/lib/cybersource_rest_client/models/{instrument_identifier_enrollable_card.rb → riskv1authenticationsetups_payment_information.rb}

@@ -13,33 +13,32 @@ Swagger Codegen version: 2.2.3
 require 'date'
 
 module CyberSource
-  class InstrumentIdentifierEnrollableCard
-    # Enrol card for a Network Token
-    attr_accessor :type
-
+  class Riskv1authenticationsetupsPaymentInformation
     attr_accessor :card
 
-    attr_accessor :bank_account
+    attr_accessor :tokenized_card
+
+    attr_accessor :fluid_data
 
-    attr_accessor :bill_to
+    attr_accessor :customer
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'type' => :'type',
         :'card' => :'card',
-        :'bank_account' => :'BankAccount',
-        :'bill_to' => :'billTo'
+        :'tokenized_card' => :'tokenizedCard',
+        :'fluid_data' => :'fluidData',
+        :'customer' => :'customer'
       }
     end
 
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'type' => :'String',
-        :'card' => :'Tmsv1instrumentidentifiersCard',
-        :'bank_account' => :'Tmsv1instrumentidentifiersBankAccount',
-        :'bill_to' => :'Tmsv1instrumentidentifiersBillTo'
+        :'card' => :'Riskv1authenticationsetupsPaymentInformationCard',
+        :'tokenized_card' => :'Riskv1authenticationsetupsPaymentInformationTokenizedCard',
+        :'fluid_data' => :'Riskv1authenticationsetupsPaymentInformationFluidData',
+        :'customer' => :'Riskv1authenticationsetupsPaymentInformationCustomer'
       }
     end
 
@@ -51,20 +50,20 @@ module CyberSource
       # convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
 
-      if attributes.has_key?(:'type')
-        self.type = attributes[:'type']
-      end
-
       if attributes.has_key?(:'card')
         self.card = attributes[:'card']
       end
 
-      if attributes.has_key?(:'BankAccount')
-        self.bank_account = attributes[:'BankAccount']
+      if attributes.has_key?(:'tokenizedCard')
+        self.tokenized_card = attributes[:'tokenizedCard']
+      end
+
+      if attributes.has_key?(:'fluidData')
+        self.fluid_data = attributes[:'fluidData']
       end
 
-      if attributes.has_key?(:'billTo')
-        self.bill_to = attributes[:'billTo']
+      if attributes.has_key?(:'customer')
+        self.customer = attributes[:'customer']
       end
     end
 
@@ -86,10 +85,10 @@ module CyberSource
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          type == o.type &&
           card == o.card &&
-          bank_account == o.bank_account &&
-          bill_to == o.bill_to
+          tokenized_card == o.tokenized_card &&
+          fluid_data == o.fluid_data &&
+          customer == o.customer
     end
 
     # @see the `==` method
@@ -101,7 +100,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [type, card, bank_account, bill_to].hash
+      [card, tokenized_card, fluid_data, customer].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/riskv1authenticationsetups_payment_information_card.rb

@@ -0,0 +1,259 @@
+=begin
+#CyberSource Merged Spec
+
+#All CyberSource API specs merged together. These are available at https://developer.cybersource.com/api/reference/api-reference.html
+
+OpenAPI spec version: 0.0.1
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.2.3
+
+=end
+
+require 'date'
+
+module CyberSource
+  class Riskv1authenticationsetupsPaymentInformationCard
+    # Three-digit value that indicates the card type.  **IMPORTANT** It is strongly recommended that you include the card type field in request messages even if it is optional for your processor and card type. Omitting the card type can cause the transaction to be processed with the wrong card type.  Possible values: - `001`: Visa. For card-present transactions on all processors except SIX, the Visa Electron card type is processed the same way that the Visa debit card is processed. Use card type value `001` for Visa Electron. - `002`: Mastercard, Eurocard[^1], which is a European regional brand of Mastercard. - `003`: American Express - `004`: Discover - `005`: Diners Club - `006`: Carte Blanche[^1] - `007`: JCB[^1] - `014`: Enroute[^1] - `021`: JAL[^1] - `024`: Maestro (UK Domestic)[^1] - `031`: Delta[^1]: Use this value only for Ingenico ePayments. For other processors, use `001` for all Visa card types. - `033`: Visa Electron[^1]. Use this value only for Ingenico ePayments and SIX. For other processors, use `001` for all Visa card types. - `034`: Dankort[^1] - `036`: Cartes Bancaires[^1] - `037`: Carta Si[^1] - `039`: Encoded account number[^1] - `040`: UATP[^1] - `042`: Maestro (International)[^1] - `050`: Hipercard[^2,3] - `051`: Aura - `054`: Elo[^3] - `062`: China UnionPay  [^1]: For this card type, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in your request for an authorization or a stand-alone credit. [^2]: For this card type on Cielo 3.0, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit. This card type is not supported on Cielo 1.5. [^3]: For this card type on Getnet and Rede, you must include the `paymentInformation.card.type` or `paymentInformation.tokenizedCard.type` field in a request for an authorization or a stand-alone credit.  #### Used by **Authorization** Required for Carte Blanche and JCB. Optional for all other card types.  #### Card Present reply This field is included in the reply message when the client software that is installed on the POS terminal uses the token management service (TMS) to retrieve tokenized payment details. You must contact customer support to have your account enabled to receive these fields in the credit reply message.  Returned by the Credit service.  This reply field is only supported by the following processors: - American Express Direct - Credit Mutuel-CIC - FDC Nashville Global - OmniPay Direct - SIX  #### GPX This field only supports transactions from the following card types: - Visa - Mastercard - AMEX - Discover - Diners - JCB - Union Pay International 
+    attr_accessor :type
+
+    # Two-digit month in which the payment card expires.  Format: `MM`.  Valid values: `01` through `12`. Leading 0 is required.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`01` through `12`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (_type_=039), if there is no expiration date on the card, use `12`.  #### FDMS Nashville Required field.  #### GPX Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### All other processors Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
+    attr_accessor :expiration_month
+
+    # Four-digit year in which the payment card expires.  Format: `YYYY`.  #### Barclays and Streamline For Maestro (UK Domestic) and Maestro (International) cards on Barclays and Streamline, this must be a valid value (`1900` through `3000`) but is not required to be a valid expiration date. In other words, an expiration date that is in the past does not cause CyberSource to reject your request. However, an invalid expiration date might cause the issuer to reject your request.  #### Encoded Account Numbers For encoded account numbers (**_type_**`=039`), if there is no expiration date on the card, use `2021`.  #### FDMS Nashville Required field.  #### FDC Nashville Global and FDMS South You can send in 2 digits or 4 digits. If you send in 2 digits, they must be the last 2 digits of the year.  #### GPX Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### All other processors Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
+    attr_accessor :expiration_year
+
+    # The customer’s payment card number, also known as the Primary Account Number (PAN). You can also use this field for encoded account numbers.  #### FDMS Nashville Required. String (19)  #### GPX Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting.  #### All other processors Required if `pointOfSaleInformation.entryMode=keyed`. However, this field is optional if your account is configured for relaxed requirements for address data and expiration date. **Important** It is your responsibility to determine whether a field is required for the transaction you are requesting. 
+    attr_accessor :number
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'type' => :'type',
+        :'expiration_month' => :'expirationMonth',
+        :'expiration_year' => :'expirationYear',
+        :'number' => :'number'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'type' => :'String',
+        :'expiration_month' => :'String',
+        :'expiration_year' => :'String',
+        :'number' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
+
+      if attributes.has_key?(:'type')
+        self.type = attributes[:'type']
+      end
+
+      if attributes.has_key?(:'expirationMonth')
+        self.expiration_month = attributes[:'expirationMonth']
+      end
+
+      if attributes.has_key?(:'expirationYear')
+        self.expiration_year = attributes[:'expirationYear']
+      end
+
+      if attributes.has_key?(:'number')
+        self.number = attributes[:'number']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @expiration_month.nil?
+        invalid_properties.push('invalid value for "expiration_month", expiration_month cannot be nil.')
+      end
+
+      if @expiration_year.nil?
+        invalid_properties.push('invalid value for "expiration_year", expiration_year cannot be nil.')
+      end
+
+      if @number.nil?
+        invalid_properties.push('invalid value for "number", number cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @expiration_month.nil?
+      return false if @expiration_year.nil?
+      return false if @number.nil?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] expiration_month Value to be assigned
+    def expiration_month=(expiration_month)
+      if expiration_month.nil?
+        fail ArgumentError, 'expiration_month cannot be nil'
+      end
+
+      @expiration_month = expiration_month
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] expiration_year Value to be assigned
+    def expiration_year=(expiration_year)
+      if expiration_year.nil?
+        fail ArgumentError, 'expiration_year cannot be nil'
+      end
+
+      @expiration_year = expiration_year
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] number Value to be assigned
+    def number=(number)
+      if number.nil?
+        fail ArgumentError, 'number cannot be nil'
+      end
+
+      @number = number
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          type == o.type &&
+          expiration_month == o.expiration_month &&
+          expiration_year == o.expiration_year &&
+          number == o.number
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [type, expiration_month, expiration_year, number].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = CyberSource.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+  end
+end

data/lib/cybersource_rest_client/models/{file_bean.rb → riskv1authenticationsetups_payment_information_customer.rb}

@@ -13,29 +13,21 @@ Swagger Codegen version: 2.2.3
 require 'date'
 
 module CyberSource
-  class FileBean
-    # Unique identifier for each file
-    attr_accessor :file_id
-
-    attr_accessor :href
-
-    attr_accessor :method
+  class Riskv1authenticationsetupsPaymentInformationCustomer
+    # Unique identifier for the legacy Secure Storage token used in the transaction. When you include this value in your request, many of the fields that are normally required for an authorization or credit become optional. 
+    attr_accessor :customer_id
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'file_id' => :'fileId',
-        :'href' => :'href',
-        :'method' => :'method'
+        :'customer_id' => :'customerId'
       }
     end
 
     # Attribute type mapping.
     def self.swagger_types
       {
-        :'file_id' => :'String',
-        :'href' => :'String',
-        :'method' => :'String'
+        :'customer_id' => :'String'
       }
     end
 
@@ -47,16 +39,8 @@ module CyberSource
       # convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h| h[k.to_sym] = v }
 
-      if attributes.has_key?(:'fileId')
-        self.file_id = attributes[:'fileId']
-      end
-
-      if attributes.has_key?(:'href')
-        self.href = attributes[:'href']
-      end
-
-      if attributes.has_key?(:'method')
-        self.method = attributes[:'method']
+      if attributes.has_key?(:'customerId')
+        self.customer_id = attributes[:'customerId']
       end
     end
 
@@ -73,14 +57,18 @@ module CyberSource
       true
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] customer_id Value to be assigned
+    def customer_id=(customer_id)
+      @customer_id = customer_id
+    end
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          file_id == o.file_id &&
-          href == o.href &&
-          method == o.method
+          customer_id == o.customer_id
     end
 
     # @see the `==` method
@@ -92,7 +80,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [file_id, href, method].hash
+      [customer_id].hash
     end
 
     # Builds the object from hash