cybersource_rest_client 0.0.22 → 0.0.28

data/lib/cybersource_rest_client/models/pts_v2_incremental_authorization_patch400_response.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class PtsV2IncrementalAuthorizationPatch400Response
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # The status of the submitted transaction.  Possible values:  - INVALID_REQUEST 

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response.rb

@@ -16,16 +16,16 @@ module CyberSource
   class PtsV2PaymentsCapturesPost201Response
     attr_accessor :_links
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # The status of the submitted transaction.  Possible values:  - PENDING 
     attr_accessor :status
 
-    # The reconciliation id for the submitted transaction. This value is not returned for all processors. 
+    # Reference number for the transaction. This value is not returned for all processors.  Returned by authorization service.  ##### PIN debit Returned by PIN debit credit, PIN debit purchase, and PIN debit reversal.  #### Atos Positive string (6)  #### All other processors String (60) 
     attr_accessor :reconciliation_id
 
     attr_accessor :client_reference_information
@@ -34,10 +34,10 @@ module CyberSource
 
     attr_accessor :order_information
 
-    attr_accessor :processing_information
-
     attr_accessor :point_of_sale_information
 
+    attr_accessor :processing_information
+
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
@@ -49,8 +49,8 @@ module CyberSource
         :'client_reference_information' => :'clientReferenceInformation',
         :'processor_information' => :'processorInformation',
         :'order_information' => :'orderInformation',
-        :'processing_information' => :'processingInformation',
-        :'point_of_sale_information' => :'pointOfSaleInformation'
+        :'point_of_sale_information' => :'pointOfSaleInformation',
+        :'processing_information' => :'processingInformation'
       }
     end
 
@@ -65,8 +65,8 @@ module CyberSource
         :'client_reference_information' => :'PtsV2PaymentsPost201ResponseClientReferenceInformation',
         :'processor_information' => :'PtsV2PaymentsCapturesPost201ResponseProcessorInformation',
         :'order_information' => :'PtsV2PaymentsCapturesPost201ResponseOrderInformation',
-        :'processing_information' => :'PtsV2PaymentsCapturesPost201ResponseProcessingInformation',
-        :'point_of_sale_information' => :'PtsV2PaymentsCapturesPost201ResponsePointOfSaleInformation'
+        :'point_of_sale_information' => :'PtsV2PaymentsCapturesPost201ResponsePointOfSaleInformation',
+        :'processing_information' => :'PtsV2PaymentsCapturesPost201ResponseProcessingInformation'
       }
     end
 
@@ -110,55 +110,37 @@ module CyberSource
         self.order_information = attributes[:'orderInformation']
       end
 
-      if attributes.has_key?(:'processingInformation')
-        self.processing_information = attributes[:'processingInformation']
-      end
-
       if attributes.has_key?(:'pointOfSaleInformation')
         self.point_of_sale_information = attributes[:'pointOfSaleInformation']
       end
+
+      if attributes.has_key?(:'processingInformation')
+        self.processing_information = attributes[:'processingInformation']
+      end
     end
 
     # Show invalid properties with the reasons. Usually used together with valid?
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
-      if !@reconciliation_id.nil? && @reconciliation_id.to_s.length > 60
-        invalid_properties.push('invalid value for "reconciliation_id", the character length must be smaller than or equal to 60.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
-      return false if !@reconciliation_id.nil? && @reconciliation_id.to_s.length > 60
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] id Value to be assigned
     def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
       @id = id
     end
 
     # Custom attribute writer method with validation
     # @param [Object] reconciliation_id Value to be assigned
     def reconciliation_id=(reconciliation_id)
-      if !reconciliation_id.nil? && reconciliation_id.to_s.length > 60
-        fail ArgumentError, 'invalid value for "reconciliation_id", the character length must be smaller than or equal to 60.'
-      end
-
       @reconciliation_id = reconciliation_id
     end
 
@@ -175,8 +157,8 @@ module CyberSource
           client_reference_information == o.client_reference_information &&
           processor_information == o.processor_information &&
           order_information == o.order_information &&
-          processing_information == o.processing_information &&
-          point_of_sale_information == o.point_of_sale_information
+          point_of_sale_information == o.point_of_sale_information &&
+          processing_information == o.processing_information
     end
 
     # @see the `==` method
@@ -188,7 +170,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [_links, id, submit_time_utc, status, reconciliation_id, client_reference_information, processor_information, order_information, processing_information, point_of_sale_information].hash
+      [_links, id, submit_time_utc, status, reconciliation_id, client_reference_information, processor_information, order_information, point_of_sale_information, processing_information].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response_order_information_amount_details.rb

@@ -17,7 +17,7 @@ module CyberSource
     # Amount you requested for the capture. 
     attr_accessor :total_amount
 
-    # Currency used for the order. Use the three-character I[ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  For details about currency as used in partial authorizations, see \"Features for Debit Cards and Prepaid Cards\" in the [Credit Card Services Using the SCMP API Guide](https://apps.cybersource.com/library/documentation/dev_guides/CC_Svcs_SCMP_API/html/)  For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf). 
+    # Currency used for the order. Use the three-character [ISO Standard Currency Codes.](http://apps.cybersource.com/library/documentation/sbc/quickref/currencies.pdf)  #### Used by **Authorization** Required field.  **Authorization Reversal** For an authorization reversal (`reversalInformation`) or a capture (`processingOptions.capture` is set to `true`), you must use the same currency that you used in your payment authorization request.  #### PIN Debit Currency for the amount you requested for the PIN debit purchase. This value is returned for partial authorizations. The issuing bank can approve a partial amount if the balance on the debit card is less than the requested transaction amount. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf). Returned by PIN debit purchase.  For PIN debit reversal requests, you must use the same currency that was used for the PIN debit purchase or PIN debit credit that you are reversing. For the possible values, see the [ISO Standard Currency Codes](https://developer.cybersource.com/library/documentation/sbc/quickref/currencies.pdf).  Required field for PIN Debit purchase and PIN Debit credit requests. Optional field for PIN Debit reversal requests.  #### GPX This field is optional for reversing an authorization or credit.  #### DCC for First Data Your local currency. For details, see the `currency` field description in [Dynamic Currency Conversion For First Data Using the SCMP API](http://apps.cybersource.com/library/documentation/dev_guides/DCC_FirstData_SCMP/DCC_FirstData_SCMP_API.pdf).  #### Tax Calculation Required for international tax and value added tax only. Optional for U.S. and Canadian taxes. Your local currency. 
     attr_accessor :currency
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -57,42 +57,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@total_amount.nil? && @total_amount.to_s.length > 15
-        invalid_properties.push('invalid value for "total_amount", the character length must be smaller than or equal to 15.')
-      end
-
-      if !@currency.nil? && @currency.to_s.length > 3
-        invalid_properties.push('invalid value for "currency", the character length must be smaller than or equal to 3.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@total_amount.nil? && @total_amount.to_s.length > 15
-      return false if !@currency.nil? && @currency.to_s.length > 3
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] total_amount Value to be assigned
     def total_amount=(total_amount)
-      if !total_amount.nil? && total_amount.to_s.length > 15
-        fail ArgumentError, 'invalid value for "total_amount", the character length must be smaller than or equal to 15.'
-      end
-
       @total_amount = total_amount
     end
 
     # Custom attribute writer method with validation
     # @param [Object] currency Value to be assigned
     def currency=(currency)
-      if !currency.nil? && currency.to_s.length > 3
-        fail ArgumentError, 'invalid value for "currency", the character length must be smaller than or equal to 3.'
-      end
-
       @currency = currency
     end
 

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response_order_information_invoice_details.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class PtsV2PaymentsCapturesPost201ResponseOrderInformationInvoiceDetails
-    # Indicates whether CyberSource sent the Level III information to the processor. The possible values are:  If your account is not enabled for Level III data or if you did not include the purchasing level field in your request, CyberSource does not include the Level III data in the request sent to the processor.  For processor-specific information, see the `bill_purchasing_level3_enabled` field description in [Level II and Level III Processing Using the SCMP API.](http://apps.cybersource.com/library/documentation/dev_guides/Level_2_3_SCMP_API/html)  Possible values: - **true** - **false** 
+    # Indicates whether CyberSource sent the Level III information to the processor. The possible values are:  If your account is not enabled for Level III data or if you did not include the purchasing level field in your request, CyberSource does not include the Level III data in the request sent to the processor.  Possible values: - **true** - **false** 
     attr_accessor :level3_transmission_status
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response_point_of_sale_information.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class PtsV2PaymentsCapturesPost201ResponsePointOfSaleInformation
-    # Identifier for the terminal at your retail location. You can define this value yourself, but consult the processor for requirements.  #### FDC Nashville Global To have your account configured to support this field, contact CyberSource Customer Support. This value must be a value that FDC Nashville Global issued to you.  For details, see the `terminal_id` field description in [Card-Present Processing Using the SCMP API.](https://apps.cybersource.com/library/documentation/dev_guides/Retail_SCMP_API/html/)  **For Payouts**: This field is applicable for CtV. 
+    # Identifier for the terminal at your retail location. You can define this value yourself, but consult the processor for requirements.  #### CyberSource through VisaNet A list of all possible values is stored in your CyberSource account. If terminal ID validation is enabled for your CyberSource account, the value you send for this field is validated against the list each time you include the field in a request. To enable or disable terminal ID validation, contact CyberSource Customer Support.  When you do not include this field in a request, CyberSource uses the default value that is defined in your CyberSource account.  #### FDC Nashville Global To have your account configured to support this field, contact CyberSource Customer Support. This value must be a value that FDC Nashville Global issued to you.  #### For Payouts This field is applicable for CyberSource through VisaNet.  #### GPX Identifier for the terminal at your retail location. A list of all possible values is stored in your account. If terminal ID validation is enabled for your account, the value you send for this field is validated against the list each time you include the field in a request. To enable or disable terminal ID validation, contact customer support.  When you do not include this field in a request, the default value that is defined in your account is used.  Optional for authorizations.  #### Used by **Authorization** Optional for the following processors. When you do not include this field in a request, the default value that is defined in your account is used.   - American Express Direct   - Credit Mutuel-CIC   - FDC Nashville Global   - SIX - Chase Paymentech Solutions: Optional field. If you include this field in your request, you must also include `pointOfSaleInformation.catLevel`. - FDMS Nashville: The default value that is defined in your account is used. - GPX - OmniPay Direct: Optional field.  For the following processors, this field is not used. - GPN - JCN Gateway - RBS WorldPay Atlanta - TSYS Acquiring Solutions - Worldpay VAP  #### Card Present reply Terminal identifier assigned by the acquirer. This value must be printed on the receipt. 
     attr_accessor :terminal_id
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -48,27 +48,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@terminal_id.nil? && @terminal_id.to_s.length > 8
-        invalid_properties.push('invalid value for "terminal_id", the character length must be smaller than or equal to 8.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@terminal_id.nil? && @terminal_id.to_s.length > 8
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] terminal_id Value to be assigned
     def terminal_id=(terminal_id)
-      if !terminal_id.nil? && terminal_id.to_s.length > 8
-        fail ArgumentError, 'invalid value for "terminal_id", the character length must be smaller than or equal to 8.'
-      end
-
       @terminal_id = terminal_id
     end
 

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response_processing_information.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class PtsV2PaymentsCapturesPost201ResponseProcessingInformation
-    # - true : the airline data was included in the request to the processor. - false : the airline data was not included in the request to the processor. 
+    # The possible values for the reply field are: - `true` : the airline data was included in the request to the processor. - `false` : the airline data was not included in the request to the processor.  Returned by authorization, capture, or credit services. 
     attr_accessor :enhanced_data_enabled
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post201_response_processor_information.rb

@@ -48,27 +48,18 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@transaction_id.nil? && @transaction_id.to_s.length > 18
-        invalid_properties.push('invalid value for "transaction_id", the character length must be smaller than or equal to 18.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@transaction_id.nil? && @transaction_id.to_s.length > 18
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] transaction_id Value to be assigned
     def transaction_id=(transaction_id)
-      if !transaction_id.nil? && transaction_id.to_s.length > 18
-        fail ArgumentError, 'invalid value for "transaction_id", the character length must be smaller than or equal to 18.'
-      end
-
       @transaction_id = transaction_id
     end
 

data/lib/cybersource_rest_client/models/pts_v2_payments_captures_post400_response.rb

@@ -14,7 +14,7 @@ require 'date'
 
 module CyberSource
   class PtsV2PaymentsCapturesPost400Response
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
     # The status of the submitted transaction.  Possible values:  - INVALID_REQUEST 

data/lib/cybersource_rest_client/models/pts_v2_payments_post201_response.rb

@@ -16,16 +16,16 @@ module CyberSource
   class PtsV2PaymentsPost201Response
     attr_accessor :_links
 
-    # An unique identification number assigned by CyberSource to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response. 
+    # An unique identification number to identify the submitted request. It is also appended to the endpoint of the resource.  On incremental authorizations, this value with be the same as the identification number returned in the original authorization response.  #### PIN debit Returned for all PIN debit services. 
     attr_accessor :id
 
-    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` Example `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC. 
+    # Time of request in UTC. Format: `YYYY-MM-DDThh:mm:ssZ` **Example** `2016-08-11T22:47:57Z` equals August 11, 2016, at 22:47:57 (10:47:57 p.m.). The `T` separates the date and the time. The `Z` indicates UTC.  Returned by authorization service.  #### PIN debit Time when the PIN debit credit, PIN debit purchase or PIN debit reversal was requested.  Returned by PIN debit credit, PIN debit purchase or PIN debit reversal. 
     attr_accessor :submit_time_utc
 
-    # The status of the submitted transaction.  Possible values:  - AUTHORIZED  - PARTIAL_AUTHORIZED  - AUTHORIZED_PENDING_REVIEW  - DECLINED  - INVALID_REQUEST 
+    # The status of the submitted transaction.  Possible values:  - AUTHORIZED  - PARTIAL_AUTHORIZED  - AUTHORIZED_PENDING_REVIEW  - AUTHORIZED_RISK_DECLINED  - PENDING_AUTHENTICATION  - PENDING_REVIEW  - DECLINED  - INVALID_REQUEST 
     attr_accessor :status
 
-    # The reconciliation id for the submitted transaction. This value is not returned for all processors. 
+    # Reference number for the transaction. This value is not returned for all processors.  Returned by authorization service.  ##### PIN debit Returned by PIN debit credit, PIN debit purchase, and PIN debit reversal.  #### Atos Positive string (6)  #### All other processors String (60) 
     attr_accessor :reconciliation_id
 
     attr_accessor :error_information
@@ -46,6 +46,8 @@ module CyberSource
 
     attr_accessor :installment_information
 
+    attr_accessor :token_information
+
     attr_accessor :risk_information
 
     attr_accessor :consumer_authentication_information
@@ -67,6 +69,7 @@ module CyberSource
         :'order_information' => :'orderInformation',
         :'point_of_sale_information' => :'pointOfSaleInformation',
         :'installment_information' => :'installmentInformation',
+        :'token_information' => :'tokenInformation',
         :'risk_information' => :'riskInformation',
         :'consumer_authentication_information' => :'consumerAuthenticationInformation'
       }
@@ -89,6 +92,7 @@ module CyberSource
         :'order_information' => :'PtsV2PaymentsPost201ResponseOrderInformation',
         :'point_of_sale_information' => :'PtsV2PaymentsPost201ResponsePointOfSaleInformation',
         :'installment_information' => :'PtsV2PaymentsPost201ResponseInstallmentInformation',
+        :'token_information' => :'PtsV2PaymentsPost201ResponseTokenInformation',
         :'risk_information' => :'PtsV2PaymentsPost201ResponseRiskInformation',
         :'consumer_authentication_information' => :'PtsV2PaymentsPost201ResponseConsumerAuthenticationInformation'
       }
@@ -158,6 +162,10 @@ module CyberSource
         self.installment_information = attributes[:'installmentInformation']
       end
 
+      if attributes.has_key?(:'tokenInformation')
+        self.token_information = attributes[:'tokenInformation']
+      end
+
       if attributes.has_key?(:'riskInformation')
         self.risk_information = attributes[:'riskInformation']
       end
@@ -171,42 +179,24 @@ module CyberSource
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@id.nil? && @id.to_s.length > 26
-        invalid_properties.push('invalid value for "id", the character length must be smaller than or equal to 26.')
-      end
-
-      if !@reconciliation_id.nil? && @reconciliation_id.to_s.length > 60
-        invalid_properties.push('invalid value for "reconciliation_id", the character length must be smaller than or equal to 60.')
-      end
-
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@id.nil? && @id.to_s.length > 26
-      return false if !@reconciliation_id.nil? && @reconciliation_id.to_s.length > 60
       true
     end
 
     # Custom attribute writer method with validation
     # @param [Object] id Value to be assigned
     def id=(id)
-      if !id.nil? && id.to_s.length > 26
-        fail ArgumentError, 'invalid value for "id", the character length must be smaller than or equal to 26.'
-      end
-
       @id = id
     end
 
     # Custom attribute writer method with validation
     # @param [Object] reconciliation_id Value to be assigned
     def reconciliation_id=(reconciliation_id)
-      if !reconciliation_id.nil? && reconciliation_id.to_s.length > 60
-        fail ArgumentError, 'invalid value for "reconciliation_id", the character length must be smaller than or equal to 60.'
-      end
-
       @reconciliation_id = reconciliation_id
     end
 
@@ -229,6 +219,7 @@ module CyberSource
           order_information == o.order_information &&
           point_of_sale_information == o.point_of_sale_information &&
           installment_information == o.installment_information &&
+          token_information == o.token_information &&
           risk_information == o.risk_information &&
           consumer_authentication_information == o.consumer_authentication_information
     end
@@ -242,7 +233,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [_links, id, submit_time_utc, status, reconciliation_id, error_information, client_reference_information, processing_information, processor_information, issuer_information, payment_information, order_information, point_of_sale_information, installment_information, risk_information, consumer_authentication_information].hash
+      [_links, id, submit_time_utc, status, reconciliation_id, error_information, client_reference_information, processing_information, processor_information, issuer_information, payment_information, order_information, point_of_sale_information, installment_information, token_information, risk_information, consumer_authentication_information].hash
     end
 
     # Builds the object from hash

data/lib/cybersource_rest_client/models/pts_v2_payments_post201_response__links.rb

@@ -20,12 +20,24 @@ module CyberSource
 
     attr_accessor :capture
 
+    attr_accessor :customer
+
+    attr_accessor :payment_instrument
+
+    attr_accessor :shipping_address
+
+    attr_accessor :instrument_identifier
+
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
         :'_self' => :'self',
         :'reversal' => :'reversal',
-        :'capture' => :'capture'
+        :'capture' => :'capture',
+        :'customer' => :'customer',
+        :'payment_instrument' => :'paymentInstrument',
+        :'shipping_address' => :'shippingAddress',
+        :'instrument_identifier' => :'instrumentIdentifier'
       }
     end
 
@@ -34,7 +46,11 @@ module CyberSource
       {
         :'_self' => :'PtsV2PaymentsPost201ResponseLinksSelf',
         :'reversal' => :'PtsV2PaymentsPost201ResponseLinksSelf',
-        :'capture' => :'PtsV2PaymentsPost201ResponseLinksSelf'
+        :'capture' => :'PtsV2PaymentsPost201ResponseLinksSelf',
+        :'customer' => :'PtsV2PaymentsPost201ResponseLinksSelf',
+        :'payment_instrument' => :'PtsV2PaymentsPost201ResponseLinksSelf',
+        :'shipping_address' => :'PtsV2PaymentsPost201ResponseLinksSelf',
+        :'instrument_identifier' => :'PtsV2PaymentsPost201ResponseLinksSelf'
       }
     end
 
@@ -57,6 +73,22 @@ module CyberSource
       if attributes.has_key?(:'capture')
         self.capture = attributes[:'capture']
       end
+
+      if attributes.has_key?(:'customer')
+        self.customer = attributes[:'customer']
+      end
+
+      if attributes.has_key?(:'paymentInstrument')
+        self.payment_instrument = attributes[:'paymentInstrument']
+      end
+
+      if attributes.has_key?(:'shippingAddress')
+        self.shipping_address = attributes[:'shippingAddress']
+      end
+
+      if attributes.has_key?(:'instrumentIdentifier')
+        self.instrument_identifier = attributes[:'instrumentIdentifier']
+      end
     end
 
     # Show invalid properties with the reasons. Usually used together with valid?
@@ -79,7 +111,11 @@ module CyberSource
       self.class == o.class &&
           _self == o._self &&
           reversal == o.reversal &&
-          capture == o.capture
+          capture == o.capture &&
+          customer == o.customer &&
+          payment_instrument == o.payment_instrument &&
+          shipping_address == o.shipping_address &&
+          instrument_identifier == o.instrument_identifier
     end
 
     # @see the `==` method
@@ -91,7 +127,7 @@ module CyberSource
     # Calculates hash code according to all attributes.
     # @return [Fixnum] Hash code
     def hash
-      [_self, reversal, capture].hash
+      [_self, reversal, capture, customer, payment_instrument, shipping_address, instrument_identifier].hash
     end
 
     # Builds the object from hash