cvss-suite 1.0.8 → 1.1.0

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/test_unit_basic.feature

@@ -1,34 +0,0 @@
-@test_unit
-Feature:
-
-  Simply adding the basic simplecov lines to a project should get
-  the user a coverage report after running `rake test`
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 91.38%   | 6     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | test/meta_magic_test.rb                 | 100.0 %  |
-      | test/some_class_test.rb                 | 100.0 %  |
-
-      # Note: faked_test.rb is not appearing here since that's the first unit test file
-      # loaded by Rake, and only there test_helper is required, which then loads simplecov
-      # and triggers tracking of all other loaded files! Solution for this would be to
-      # configure simplecov in this first test instead of test_helper.
-
-    And the report should be based upon:
-      | Unit Tests |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/test_unit_groups_and_filters_basic.feature

@@ -1,29 +0,0 @@
-@test_unit
-Feature:
-
-  Defining some groups and filters should give a corresponding
-  coverage report that respects those settings after running tests
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-        add_filter '/test/'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 88.1%    | 4     |
-      | Libs      | 86.11%   | 3     |
-      | Ungrouped | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         |  80.0 %  |
-      | lib/faked_project/framework_specific.rb |  75.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/test_unit_groups_and_filters_complex.feature

@@ -1,35 +0,0 @@
-@test_unit
-Feature: Sophisticated grouping and filtering on Test/Unit
-
-  Defining groups and filters can be done by passing blocks or strings.
-  Blocks get each SimpleCov::SourceFile instance passed an can use arbitrary
-  and potentially weird conditions to remove files from the report or add them
-  to specific groups.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'By block' do |src_file|
-          src_file.filename =~ /MaGiC/i
-        end
-        add_group 'By string', 'project/meta_magic'
-
-        add_filter 'faked_project.rb'
-        # Remove all files that include "describe" in their source
-        add_filter {|src_file| src_file.lines.any? {|line| line.src =~ /TestCase/ } }
-        add_filter {|src_file| src_file.covered_percent < 100 }
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 100.0%   | 1     |
-      | By block  | 100.0%   | 1     |
-      | By string | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                            | coverage |
-      | lib/faked_project/meta_magic.rb | 100.0 %  |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/test_unit_groups_using_filter_class.feature

@@ -1,40 +0,0 @@
-@test_unit
-Feature: Grouping on Test/Unit using a custom filter class
-
-  Next to passing a block or a string to define a group, you can also pass
-  a filter class. The filter class inherits from SimpleCov::Filter and
-  must implement the matches? method, which is used to determine whether
-  or not a file should be added to the group.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      class CoverageFilter < SimpleCov::Filter
-        def matches?(source_file)
-          source_file.covered_percent < filter_argument
-        end
-      end
-      SimpleCov.start do
-        add_group 'By filter class', CoverageFilter.new(90)
-        add_group 'By string', 'project/meta_magic'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name             | coverage | files |
-      | All Files        | 91.38%   | 6     |
-      | By filter class  | 78.26%   | 2     |
-      | By string        | 100.0%   | 1     |
-      | Ungrouped        | 100.0%   | 3     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | test/meta_magic_test.rb                 | 100.0 %  |
-      | test/some_class_test.rb                 | 100.0 %  |
-

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/test_unit_without_simplecov.feature

@@ -1,20 +0,0 @@
-@test_unit
-Feature:
-
-  Running unit tests without simplecov configuration
-
-  Scenario: No config at all
-    When I successfully run `bundle exec rake test`
-    Then no coverage report should have been generated
-
-  Scenario: Configured, but not started
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.configure do
-        add_filter 'somefilter'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then no coverage report should have been generated

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/unicode_compatiblity.feature

@@ -1,67 +0,0 @@
-@test_unit @unicode
-Feature:
-
-  Files with unicode in their source should be no problem at all for
-  generating a proper coverage report.
-
-  Background:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks'
-      """
-
-  Scenario: Snowman inside method string
-    Given a file named "lib/faked_project/unicode.rb" with:
-      """
-      # encoding: UTF-8
-      class SourceCodeWithUnicode
-        def self.yell!
-          puts "☃"
-        end
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 86.67%   | 5     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/unicode.rb            | 66.67 %  |
-
-    And the report should be based upon:
-      | Unit Tests |
-
-  Scenario: Author name in comment
-    Given a file named "lib/faked_project/unicode.rb" with:
-      """
-      # encoding: UTF-8
-      # author:  Javiér Hernández
-      class SomeClassWrittenByAForeigner
-        def self.yell!
-          foo
-        end
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 86.67%   | 5     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/unicode.rb            | 66.67 %  |
-
-    And the report should be based upon:
-      | Unit Tests |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/lib/simplecov.rb

@@ -1,183 +0,0 @@
-#
-# Code coverage for ruby 1.9. Please check out README for a full introduction.
-#
-# Coverage may be inaccurate under JRUBY.
-if defined?(JRUBY_VERSION) && defined?(JRuby)
-
-  # @see https://github.com/jruby/jruby/issues/1196
-  # @see https://github.com/metricfu/metric_fu/pull/226
-  # @see https://github.com/colszowka/simplecov/issues/420
-  # @see https://github.com/colszowka/simplecov/issues/86
-  # @see https://jira.codehaus.org/browse/JRUBY-6106
-
-  unless JRuby.runtime.debug?
-    warn 'Coverage may be inaccurate; set "cli.debug=true" ("-Xcli.debug=true") in your .jrubyrc or' \
-      ' do JRUBY_OPTS="-d"'
-  end
-end
-module SimpleCov
-  class << self
-    attr_accessor :running
-    attr_accessor :pid
-
-    #
-    # Sets up SimpleCov to run against your project.
-    # You can optionally specify a profile to use as well as configuration with a block:
-    #   SimpleCov.start
-    #    OR
-    #   SimpleCov.start 'rails' # using rails profile
-    #    OR
-    #   SimpleCov.start do
-    #     add_filter 'test'
-    #   end
-    #     OR
-    #   SimpleCov.start 'rails' do
-    #     add_filter 'test'
-    #   end
-    #
-    # Please check out the RDoc for SimpleCov::Configuration to find about available config options
-    #
-    def start(profile = nil, &block)
-      if SimpleCov.usable?
-        load_profile(profile) if profile
-        configure(&block) if block_given?
-        @result = nil
-        self.running = true
-        self.pid = Process.pid
-        Coverage.start
-      else
-        warn "WARNING: SimpleCov is activated, but you're not running Ruby 1.9+ - no coverage analysis will happen"
-        warn "Starting with SimpleCov 1.0.0, even no-op compatibility with Ruby <= 1.8 will be entirely dropped."
-        false
-      end
-    end
-
-    #
-    # Finds files that were to be tracked but were not loaded and initializes
-    # their coverage to zero.
-    #
-    def add_not_loaded_files(result)
-      if track_files
-        result = result.dup
-        Dir[track_files].each do |file|
-          absolute = File.expand_path(file)
-
-          result[absolute] ||= [0] * File.foreach(absolute).count
-        end
-      end
-
-      result
-    end
-
-    #
-    # Returns the result for the current coverage run, merging it across test suites
-    # from cache using SimpleCov::ResultMerger if use_merging is activated (default)
-    #
-    def result
-      # Ensure the variable is defined to avoid ruby warnings
-      @result = nil unless defined?(@result)
-
-      # Collect our coverage result
-      if running && !result?
-        @result = SimpleCov::Result.new add_not_loaded_files(Coverage.result)
-      end
-
-      # If we're using merging of results, store the current result
-      # first, then merge the results and return those
-      if use_merging
-        SimpleCov::ResultMerger.store_result(@result) if result?
-
-        SimpleCov::ResultMerger.merged_result
-      else
-        @result
-      end
-    ensure
-      self.running = false
-    end
-
-    #
-    # Returns nil if the result has not been computed
-    # Otherwise, returns the result
-    #
-    def result?
-      defined?(@result) && @result
-    end
-
-    #
-    # Applies the configured filters to the given array of SimpleCov::SourceFile items
-    #
-    def filtered(files)
-      result = files.clone
-      filters.each do |filter|
-        result = result.reject { |source_file| filter.matches?(source_file) }
-      end
-      SimpleCov::FileList.new result
-    end
-
-    #
-    # Applies the configured groups to the given array of SimpleCov::SourceFile items
-    #
-    def grouped(files)
-      grouped = {}
-      grouped_files = []
-      groups.each do |name, filter|
-        grouped[name] = SimpleCov::FileList.new(files.select { |source_file| filter.matches?(source_file) })
-        grouped_files += grouped[name]
-      end
-      if groups.length > 0 && (other_files = files.reject { |source_file| grouped_files.include?(source_file) }).length > 0
-        grouped["Ungrouped"] = SimpleCov::FileList.new(other_files)
-      end
-      grouped
-    end
-
-    #
-    # Applies the profile of given name on SimpleCov configuration
-    #
-    def load_profile(name)
-      profiles.load(name)
-    end
-
-    def load_adapter(name)
-      warn "#{Kernel.caller.first}: [DEPRECATION] #load_adapter is deprecated. Use #load_profile instead."
-      load_profile(name)
-    end
-
-    #
-    # Checks whether we're on a proper version of Ruby (likely 1.9+) which
-    # provides coverage support
-    #
-    def usable?
-      return @usable if defined?(@usable) && !@usable.nil?
-
-      @usable = begin
-        require "coverage"
-        require "simplecov/jruby_fix"
-        true
-      rescue LoadError
-        false
-      end
-    end
-  end
-end
-
-$LOAD_PATH.unshift(File.join(File.dirname(__FILE__)))
-require "simplecov/configuration"
-SimpleCov.send :extend, SimpleCov::Configuration
-require "simplecov/exit_codes"
-require "simplecov/profiles"
-require "simplecov/source_file"
-require "simplecov/file_list"
-require "simplecov/result"
-require "simplecov/filter"
-require "simplecov/formatter"
-require "simplecov/last_run"
-require "simplecov/merge_helpers"
-require "simplecov/result_merger"
-require "simplecov/command_guesser"
-require "simplecov/version"
-
-# Load default config
-require "simplecov/defaults" unless ENV["SIMPLECOV_NO_DEFAULTS"]
-
-# Load Rails integration (only for Rails 3, see #113)
-require "simplecov/railtie" if defined? Rails::Railtie

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/lib/simplecov/command_guesser.rb

@@ -1,59 +0,0 @@
-#
-# Helper that tries to find out what test suite is running (for SimpleCov.command_name)
-#
-module SimpleCov
-  module CommandGuesser
-    class << self
-      # Storage for the original command line call that invoked the test suite.
-      # This has got to be stored as early as possible because i.e. rake and test/unit 2
-      # have a habit of tampering with ARGV, which makes i.e. the automatic distinction
-      # between rails unit/functional/integration tests impossible without this cached
-      # item.
-      attr_accessor :original_run_command
-
-      def guess
-        from_env || from_command_line_options || from_defined_constants
-      end
-
-    private
-
-      def from_env
-        # If being run from inside parallel_tests set the command name according to the process number
-        return unless ENV["PARALLEL_TEST_GROUPS"] && ENV["TEST_ENV_NUMBER"]
-        number = ENV["TEST_ENV_NUMBER"]
-        number = "1" if number.empty?
-        "(#{number}/#{ENV['PARALLEL_TEST_GROUPS']})"
-      end
-
-      def from_command_line_options
-        case original_run_command
-        when /test\/functional\//, /test\/\{.*functional.*\}\//
-          "Functional Tests"
-        when /test\/integration\//
-          "Integration Tests"
-        when /test\//
-          "Unit Tests"
-        when /spec/
-          "RSpec"
-        when /cucumber/, /features/
-          "Cucumber Features"
-        end
-      end
-
-      def from_defined_constants
-        # If the command regexps fail, let's try checking defined constants.
-        if defined?(RSpec)
-          "RSpec"
-        elsif defined?(Test::Unit)
-          "Unit Tests"
-        elsif defined?(MiniTest)
-          "MiniTest"
-        else
-          # TODO: Provide link to docs/wiki article
-          warn "SimpleCov failed to recognize the test framework and/or suite used. Please specify manually using SimpleCov.command_name 'Unit Tests'."
-          "Unknown Test Framework"
-        end
-      end
-    end
-  end
-end