cvss-suite 1.0.8 → 1.1.0

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/rspec_fails_on_initialization.feature

@@ -1,14 +0,0 @@
-@rspec
-Feature:
-
-  Running specs with a failing rspec setup
-
-  Scenario: Fail if rspec fails before starting its tests
-    Given a file named "spec/spec_helper.rb" with:
-      """
-      require 'simplecov'
-      SimpleCov.start
-      raise "some exception in the class loading before the tests start"
-      """
-    When I run `bundle exec rspec spec`
-    Then the exit status should not be 0

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/rspec_groups_and_filters_basic.feature

@@ -1,29 +0,0 @@
-@rspec
-Feature:
-
-  Defining some groups and filters should give a corresponding
-  coverage report that respects those settings after running rspec
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-        add_filter '/spec/'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    And I should see the groups:
-      | name      | coverage | files |
-      | All Files | 88.1%    | 4     |
-      | Libs      | 86.11%   | 3     |
-      | Ungrouped | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %  |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/rspec_groups_and_filters_complex.feature

@@ -1,37 +0,0 @@
-@rspec
-Feature: Sophisticated grouping and filtering on RSpec
-
-  Defining groups and filters can be done by passing blocks or strings.
-  Blocks get each SimpleCov::SourceFile instance passed an can use arbitrary
-  and potentially weird conditions to remove files from the report or add them
-  to specific groups.
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        add_group 'By block' do |src_file|
-          src_file.filename =~ /MaGiC/i
-        end
-        add_group 'By string', 'project/meta_magic'
-        add_group 'By array', ['project/meta_magic']
-
-        add_filter 'faked_project.rb'
-        # Remove all files that include "describe" in their source
-        add_filter {|src_file| src_file.lines.any? {|line| line.src =~ /describe/ } }
-        add_filter {|src_file| src_file.covered_percent < 100 }
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then I should see the groups:
-      | name      | coverage | files |
-      | All Files | 100.0%   | 1     |
-      | By block  | 100.0%   | 1     |
-      | By string | 100.0%   | 1     |
-      | By array  | 100.0%   | 1     |
-
-    And I should see the source files:
-      | name                            | coverage |
-      | lib/faked_project/meta_magic.rb | 100.0 %  |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/rspec_groups_using_filter_class.feature

@@ -1,41 +0,0 @@
-@rspec
-Feature: Grouping on RSpec using a custom filter class
-
-  Next to passing a block or a string to define a group, you can also pass
-  a filter class. The filter class inherits from SimpleCov::Filter and
-  must implement the matches? method, which is used to determine whether
-  or not a file should be added to the group.
-
-  Scenario:
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      class CoverageFilter < SimpleCov::Filter
-        def matches?(source_file)
-          source_file.covered_percent < filter_argument
-        end
-      end
-      SimpleCov.start do
-        add_group 'By filter class', CoverageFilter.new(90)
-        add_group 'By string', 'project/meta_magic'
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then I should see the groups:
-      | name             | coverage | files |
-      | All Files        | 91.8%    | 7     |
-      | By filter class  | 78.26%   | 2     |
-      | By string        | 100.0%   | 1     |
-      | Ungrouped        | 100.0%   | 4     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | spec/forking_spec.rb                    | 100.0 %  |
-      | spec/meta_magic_spec.rb                 | 100.0 %  |
-      | spec/some_class_spec.rb                 | 100.0 %  |
-

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/rspec_without_simplecov.feature

@@ -1,20 +0,0 @@
-@rspec
-Feature:
-
-  Running specs without simplecov configuration
-
-  Scenario: No config at all
-    When I successfully run `bundle exec rspec spec`
-    Then no coverage report should have been generated
-
-  Scenario: Configured, but not started
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.configure do
-        add_filter 'somefilter'
-      end
-      """
-
-    When I successfully run `bundle exec rspec spec`
-    Then no coverage report should have been generated

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/skipping_code_blocks_manually.feature

@@ -1,70 +0,0 @@
-@test_unit @nocov
-Feature:
-
-  When code is wrapped in :nocov: comment blocks, it does not count
-  against the coverage numbers.
-
-  Background:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks'
-      """
-
-  Scenario: Plain run with a nocov'd method
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-        #:nocov:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-        #:nocov:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 5 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |
-
-  Scenario: Number of spaces should not mix up nocov results
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-           #    :nocov:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-          #   :nocov:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 5 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/step_definitions/html_steps.rb

@@ -1,44 +0,0 @@
-module GroupHelpers
-  def available_groups
-    all("#content .file_list_container")
-  end
-
-  def available_source_files
-    all(".source_files .source_table")
-  end
-end
-World(GroupHelpers)
-
-Then /^I should see the groups:$/ do |table|
-  expected_groups = table.hashes
-  # Given group names should be the same number than those rendered in report
-  expect(expected_groups.count).to eq(available_groups.count)
-
-  # Verify each of the expected groups has a file list container and corresponding title and coverage number
-  # as well as the correct number of links to files.
-  expected_groups.each do |group|
-    with_scope "#content ##{group['name'].gsub(/[^a-z]/i, '')}.file_list_container" do
-      file_count_in_group = page.all("a.src_link").count
-      expect(file_count_in_group).to eq(group["files"].to_i)
-
-      with_scope "h2" do
-        expect(page).to have_content(group["name"])
-        expect(page).to have_content(group["coverage"])
-      end
-    end
-  end
-end
-
-Then /^I should see the source files:$/ do |table|
-  expected_files = table.hashes
-  expect(expected_files.length).to eq(available_source_files.count)
-
-  # Find all filenames and their coverage present in coverage report
-  files = available_source_files.map { |f| {"name" => f.find("h3").text, "coverage" => f.find("h4 > span").text} }
-
-  expect(files.sort_by { |hsh| hsh["name"] }).to eq(expected_files.sort_by { |hsh| hsh["name"] })
-end
-
-Then /^there should be (\d+) skipped lines in the source files$/ do |expected_count|
-  expect(all(".source_table ol li.skipped").count).to eq(expected_count.to_i)
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/step_definitions/simplecov_steps.rb

@@ -1,68 +0,0 @@
-# Just a shortcut to make framework setup more readable
-# The test project is using separate config files to avoid specifying all of
-# test/spec_helper in the features every time.
-Given /^SimpleCov for (.*) is configured with:$/ do |framework, config_body|
-  framework_dir = begin
-    case framework
-    when /RSpec/i
-      "spec"
-    when /Test\/Unit/i
-      "test"
-    when /Cucumber/i
-      "features/support"
-    else
-      fail ArgumentError, "Could not identify test framework #{framework}!"
-    end
-  end
-
-  steps %(
-    Given a file named "#{framework_dir}/simplecov_config.rb" with:
-      """
-      #{config_body}
-      """
-    )
-end
-
-When /^I open the coverage report generated with `([^`]+)`$/ do |command|
-  steps %(
-    When I successfully run `#{command}`
-    Then a coverage report should have been generated
-    When I open the coverage report
-    )
-end
-
-Then /^a coverage report should have been generated(?: in "([^"]*)")?$/ do |coverage_dir|
-  coverage_dir ||= "coverage"
-  steps %(
-    Then the output should contain "Coverage report generated"
-    And a directory named "#{coverage_dir}" should exist
-    And the following files should exist:
-      | #{coverage_dir}/index.html      |
-      | #{coverage_dir}/.resultset.json |
-    )
-end
-
-Then /^no coverage report should have been generated(?: in "([^"]*)")?$/ do |coverage_dir|
-  coverage_dir ||= "coverage"
-  steps %(
-    Then the output should not contain "Coverage report generated"
-    And a directory named "#{coverage_dir}" should not exist
-    And the following files should not exist:
-      | #{coverage_dir}/index.html      |
-      | #{coverage_dir}/.resultset.json |
-    )
-end
-
-Then /^the report should be based upon:$/ do |table|
-  frameworks = table.raw.flatten
-  steps %(
-    Then the output should contain "Coverage report generated for #{frameworks.join(', ')}"
-    And I should see "using #{frameworks.join(', ')}" within "#footer"
-    )
-end
-
-# This is neccessary to ensure timing-dependant tests like the merge timeout
-# do not fail on powerful machines.
-When /^I wait for (\d+) seconds$/ do |seconds|
-  sleep seconds.to_i
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/step_definitions/transformers.rb

@@ -1,13 +0,0 @@
-#
-# Enforce the alphabetical execution of specs because rspec 2+ executes them
-# randomly with `rspec spec` while we need them in an accurate order for coverage
-# reports that include the spec files.
-#
-# This is due to the fact that coverage will not include the first loaded spec/test file.
-# To get predictable coverage results, we need to know which one that is...
-#
-Transform "bundle exec rspec spec" do |_|
-  files = nil # Avoid shadowing
-  in_current_directory { files = Dir["spec/**/*_spec.rb"] }
-  "bundle exec rspec #{files.sort.join(' ')}"
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/step_definitions/web_steps.rb

@@ -1,64 +0,0 @@
-module WithinHelpers
-  def with_scope(locator)
-    locator ? within(locator) { yield } : yield
-  end
-end
-World(WithinHelpers)
-
-When /^I open the coverage report$/ do
-  visit "/"
-end
-
-Given /^(?:|I )am on (.+)$/ do |path|
-  visit path
-end
-
-When /^(?:|I )go to (.+)$/ do |path|
-  visit path
-end
-
-When /^(?:|I )press "([^"]*)"(?: within "([^"]*)")?$/ do |button, selector|
-  with_scope(selector) do
-    click_button(button)
-  end
-end
-
-When /^(?:|I )follow "([^"]*)"(?: within "([^"]*)")?$/ do |link, selector|
-  with_scope(selector) do
-    click_link(link)
-  end
-end
-
-Then /^(?:|I )should see "([^"]*)"(?: within "([^"]*)")?$/ do |text, selector|
-  with_scope(selector) do
-    expect(page).to have_content(text)
-  end
-end
-
-Then /^(?:|I )should see \/([^\/]*)\/(?: within "([^"]*)")?$/ do |regexp, selector|
-  regexp = Regexp.new(regexp)
-  with_scope(selector) do
-    expect(page).to have_xpath("//*", :text => regexp)
-  end
-end
-
-Then /^(?:|I )should not see "([^"]*)"(?: within "([^"]*)")?$/ do |text, selector|
-  with_scope(selector) do
-    expect(page).to have_no_content(text)
-  end
-end
-
-Then /^(?:|I )should not see \/([^\/]*)\/(?: within "([^"]*)")?$/ do |regexp, selector|
-  regexp = Regexp.new(regexp)
-  with_scope(selector) do
-    expect(page).to have_no_xpath("//*", :text => regexp)
-  end
-end
-
-Then /^show me the page$/ do
-  save_and_open_page # rubocop:disable Lint/Debugger
-end
-
-Then /^print the page$/ do
-  puts page.body
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/features/support/env.rb

@@ -1,50 +0,0 @@
-if RUBY_VERSION < "1.9"
-  $stderr.puts "Sorry, Cucumber features are only meant to run on Ruby 1.9+ :("
-  exit 0
-end
-
-require "bundler"
-Bundler.setup
-require "aruba/cucumber"
-require "aruba/jruby" if RUBY_ENGINE == "jruby"
-require "capybara/cucumber"
-require "phantomjs/poltergeist"
-
-# Fake rack app for capybara that just returns the latest coverage report from aruba temp project dir
-Capybara.app = lambda { |env|
-  request_path = env["REQUEST_PATH"] || "/"
-  request_path = "/index.html" if request_path == "/"
-  [
-    200,
-    {"Content-Type" => "text/html"},
-    [File.read(File.join(File.dirname(__FILE__), "../../tmp/aruba/project/coverage", request_path))],
-  ]
-}
-
-Capybara.default_driver = Capybara.javascript_driver = :poltergeist
-
-Capybara.configure do |config|
-  config.ignore_hidden_elements = false
-end
-
-Before do
-  # JRuby takes it's time... See https://github.com/cucumber/aruba/issues/134
-  @aruba_timeout_seconds = RUBY_ENGINE == "jruby" ? 60 : 20
-
-  this_dir = File.dirname(__FILE__)
-
-  # Clean up and create blank state for fake project
-  in_current_directory do
-    FileUtils.rm_rf "project"
-    FileUtils.cp_r File.join(this_dir, "../../spec/faked_project/"), "project"
-  end
-
-  step 'I cd to "project"'
-end
-
-# Workaround for https://github.com/cucumber/aruba/pull/125
-Aruba.configure do |config|
-  config.before_cmd do
-    set_env("JRUBY_OPTS", "-X-C --1.9")
-  end
-end