cvss-suite 1.0.8 → 1.1.0

data/vendor/cache/ruby/2.2.0/gems/rspec-support-3.4.0/lib/rspec/support/spec/with_isolated_directory.rb

@@ -1,9 +0,0 @@
-require 'tmpdir'
-
-RSpec.shared_context "isolated directory", :isolated_directory => true do
-  around do |ex|
-    Dir.mktmpdir do |tmp_dir|
-      Dir.chdir(tmp_dir, &ex)
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/rspec-support-3.4.0/lib/rspec/support/spec/with_isolated_stderr.rb

@@ -1,13 +0,0 @@
-module RSpec
-  module Support
-    module WithIsolatedStdErr
-      def with_isolated_stderr
-        original = $stderr
-        $stderr = StringIO.new
-        yield
-      ensure
-        $stderr = original
-      end
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/rspec-support-3.4.0/lib/rspec/support/version.rb

@@ -1,7 +0,0 @@
-module RSpec
-  module Support
-    module Version
-      STRING = '3.4.0'
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/rspec-support-3.4.0/lib/rspec/support/version_checker.rb

@@ -1,53 +0,0 @@
-module RSpec
-  module Support
-    LibraryVersionTooLowError = Class.new(StandardError)
-
-    # @private
-    class VersionChecker
-      def initialize(library_name, library_version, min_patch_level)
-        @library_name, @library_version = library_name, library_version
-        @min_patch_level = min_patch_level
-
-        @major,     @minor,     @patch     = parse_version(library_version)
-        @min_major, @min_minor, @min_patch = parse_version(min_patch_level)
-
-        @comparison_result = compare_version
-      end
-
-      def check_version!
-        raise_too_low_error if too_low?
-      end
-
-    private
-
-      def too_low?
-        @comparison_result == :too_low
-      end
-
-      def raise_too_low_error
-        raise LibraryVersionTooLowError,
-              "You are using #{@library_name} #{@library_version}. " \
-              "RSpec requires version #{version_requirement}."
-      end
-
-      def compare_version
-        case
-        when @major < @min_major then :too_low
-        when @major > @min_major then :ok
-        when @minor < @min_minor then :too_low
-        when @minor > @min_minor then :ok
-        when @patch < @min_patch then :too_low
-        else :ok
-        end
-      end
-
-      def version_requirement
-        ">= #{@min_patch_level}"
-      end
-
-      def parse_version(version)
-        version.split('.').map { |v| v.to_i }
-      end
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/rspec-support-3.4.0/lib/rspec/support/warnings.rb

@@ -1,39 +0,0 @@
-require 'rspec/support'
-RSpec::Support.require_rspec_support "caller_filter"
-
-module RSpec
-  module Support
-    module Warnings
-      def deprecate(deprecated, options={})
-        warn_with "DEPRECATION: #{deprecated} is deprecated.", options
-      end
-
-      # @private
-      #
-      # Used internally to print deprecation warnings
-      # when rspec-core isn't loaded
-      def warn_deprecation(message, options={})
-        warn_with "DEPRECATION: \n #{message}", options
-      end
-
-      # @private
-      #
-      # Used internally to print warnings
-      def warning(text, options={})
-        warn_with "WARNING: #{text}.", options
-      end
-
-      # @private
-      #
-      # Used internally to print longer warnings
-      def warn_with(message, options={})
-        call_site = options.fetch(:call_site) { CallerFilter.first_non_rspec_line }
-        message << " Use #{options[:replacement]} instead." if options[:replacement]
-        message << " Called from #{call_site}." if call_site
-        Support.warning_notifier.call message
-      end
-    end
-  end
-
-  extend RSpec::Support::Warnings
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/.gitignore

@@ -1,31 +0,0 @@
-.bundle
-Gemfile.lock
-gemfiles/*.lock
-
-## MAC OS
-.DS_Store
-.document
-
-## TEXTMATE
-*.tmproj
-tmtags
-
-## EMACS
-*~
-\#*
-.\#*
-
-## VIM
-*.swp
-
-## PROJECT::GENERAL
-coverage
-rdoc
-pkg
-tmp
-capybara*.html
-.rvmrc
-
-## PROJECT::SPECIFIC
-
-.yardoc

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/.rspec

@@ -1,3 +0,0 @@
---color
---order random
---warning

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/.rubocop.yml

@@ -1,73 +0,0 @@
-AllCops:
-  Exclude:
-    - 'spec/fixtures/iso-8859.rb'
-    - 'tmp/**/*'
-    - 'vendor/bundle/**/*'
-
-Lint/AmbiguousRegexpLiteral:
-  Exclude:
-    - 'features/**/*_steps.rb'
-    - 'spec/**/*_steps.rb'
-    - 'tmp/**/*_steps.rb'
-
-Metrics/AbcSize:
-  Max: 25 # TODO: Lower to 15
-
-Metrics/BlockNesting:
-  Max: 2
-
-Metrics/LineLength:
-  AllowURI: true
-  Enabled: false
-
-Metrics/MethodLength:
-  CountComments: false
-  Max: 12 # TODO: Lower to 10
-
-Metrics/ParameterLists:
-  Max: 4
-  CountKeywordArgs: true
-
-Style/AccessModifierIndentation:
-  EnforcedStyle: outdent
-
-Style/CollectionMethods:
-  PreferredMethods:
-    map:      'collect'
-    reduce:   'inject'
-    find:     'detect'
-    find_all: 'select'
-
-Style/Documentation:
-  Enabled: false
-
-Style/DoubleNegation:
-  Enabled: false
-
-Style/HashSyntax:
-  EnforcedStyle: hash_rockets
-
-Style/RegexpLiteral:
-  Enabled: false
-
-Style/SpaceInsideHashLiteralBraces:
-  EnforcedStyle: no_space
-
-Style/SpecialGlobalVars:
-  Exclude:
-    - 'spec/deleted_source_spec.rb'
-    - 'spec/return_codes_spec.rb'
-    - 'lib/simplecov/defaults.rb'
-
-Style/StringLiterals:
-  EnforcedStyle: double_quotes
-
-Style/FileName:
-  Exclude:
-    - 'spec/fixtures/utf-8.rb'
-
-Style/TrailingCommaInLiteral:
-  EnforcedStyleForMultiline: comma
-
-Style/GuardClause:
-  Enabled: false

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/.travis.yml

@@ -1,27 +0,0 @@
-language: ruby
-
-before_install:
-  - gem install bundler
-
-bundler_args: --without development --jobs=3 --retry=3
-
-cache: bundler
-
-sudo: false
-
-rvm:
-  - 1.8.7
-  - 1.9.3
-  - 2.0.0
-  - 2.1
-  - 2.2
-  - ruby-head
-  - jruby
-  - rbx-2
-
-matrix:
-  allow_failures:
-    - rvm: ruby-head
-    - rvm: jruby
-    - rvm: rbx-2
-  fast_finish: true

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/.yardopts

@@ -1 +0,0 @@
-- **/*.md

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/CHANGELOG.md

@@ -1,391 +0,0 @@
-Unreleased ([changes](https://github.com/colszowka/simplecov/compare/v0.11.2...master))
-=================
-
-## Enhancements
-
-## Bugfixes
-
-0.11.2 2016-02-03 ([changes](https://github.com/colszowka/simplecov/compare/v0.11.1...v0.11.2))
-=================
-
-## Enhancements
-
-* Do not globally pollute Array and Hash with `merge_resultset` utility methods. See [#449](https://github.com/colszowka/simplecov/pull/449) (thanks @amatsuda)
-* Do not `mkdir_p` the `coverage_path` on every access of the method (See [#453](https://github.com/colszowka/simplecov/pull/453) (thanks @paddor)
-* Fixes a Ruby warning related to the `track_files` configuration. See [#447](https://github.com/colszowka/simplecov/pull/447) (thanks @craiglittle)
-* Add a group for background jobs to default Rails profile. See [#442](https://github.com/colszowka/simplecov/pull/442) (thanks @stve)
-
-## Bugfixes
-
-* Fix root_filter evaluates SimpleCov.root before initialization. See [#437](https://github.com/colszowka/simplecov/pull/437) (thanks @tmtm)
-
-0.11.1 2015-12-01 ([changes](https://github.com/colszowka/simplecov/compare/v0.11.0...v0.11.1))
-=================
-
-## Enhancements
-
-## Bugfixes
-
-* Fixed regression in `MultiFormatter.[]` with multiple arguments. See [#431](https://github.com/colszowka/simplecov/pull/431) (thanks @dillondrobena)
-
-0.11.0 2015-11-29 ([changes](https://github.com/colszowka/simplecov/compare/v0.10.0...v0.11.0))
-=================
-
-## Enhancements
-
-* Added `SimpleCov.minimum_coverage_by_file` for per-file coverage thresholds. See [#392](https://github.com/colszowka/simplecov/pull/392) (thanks @ptashman)
-* Added `track_files` configuration option to specify a glob to always include in coverage results, whether or not those files are required. By default, this is enabled in the Rails profile for common Rails directories. See [#422](https://github.com/colszowka/simplecov/pull/422) (thanks @hugopeixoto)
-* Speed up `root_filter` by an order of magnitude. See [#396](https://github.com/colszowka/simplecov/pull/396) (thanks @raszi)
-
-## Bugfixes
-
-* Fix warning about global variable `$ERROR_INFO`. See [#400](https://github.com/colszowka/simplecov/pull/400) (thanks @amatsuda)
-* Actually recurse upward looking for `.simplecov`, as claimed by the documentation, rather than only the working directory. See [#423](https://github.com/colszowka/simplecov/pull/423) (thanks @alexdowad)
-
-0.10.0 2015-04-18 ([changes](https://github.com/colszowka/simplecov/compare/v0.9.2...v0.10.0))
-=================
-
-## Enhancements
-
- * Add writeup about using with Spring to README. See [#341](https://github.com/colszowka/simplecov/issues/341) (thanks @swrobel and @onebree)
- * Add support to pass in an Array when creating filter groups (original PR #104)
- * Filter `/vendor/bundle` by default. See [#331](https://github.com/colszowka/simplecov/pull/331) (thanks @andyw8)
- * Add some helpful singleton methods to the version string.
- * Allow array to be passed in a filter. See [375](https://github.com/colszowka/simplecov/pull/375) (thanks @JanStevens)
- * Enforce consistent code formatting with RuboCop.
-
-## Bugfixes
-
- * Fix order dependencies in unit tests. See [#376](https://github.com/colszowka/simplecov/pull/376) (thanks @hugopeixoto)
- * Only run the at_exit behaviors if the current PID matches the PID that called SimpleCov.start. See [#377](https://github.com/colszowka/simplecov/pull/377) (thanks @coderanger)
-
-0.9.2, 2015-02-18 ([changes](https://github.com/colszowka/simplecov/compare/v0.9.1...v0.9.2))
-=================
-
-This is a minor bugfix release for simplecov-html, released as `0.9.0`. Due to the tight version constraint in the gemspec
-a new release of simplecov had to be shipped to allow using simplecov-html `~> 0.9.0`.
-
-  * The browser back / forward button should now work again. See [#36](https://github.com/colszowka/simplecov-html/pull/36) and
-    [#35](https://github.com/colszowka/simplecov-html/pull/35). Thanks @whatasunnyday and @justinsteele for submitting PRs to fix this.
-  * Fix "warning: possibly useless use of a variable in void context" See [#31](https://github.com/colszowka/simplecov-html/pull/31). Thanks @cbandy
-  * Always use binary file format. See [#32](https://github.com/colszowka/simplecov-html/pull/32). Thanks @andy128k
-  * Avoid slow file output with JRuby/Windows. See [#16](https://github.com/colszowka/simplecov-html/pull/16). Thanks @pschambacher
-
-Other than the release includes a bunch of mostly documentation improvements:
-
-  * Update Rails path for Rails 4+. See [#336](https://github.com/colszowka/simplecov/pull/336). Thanks @yazinsai
-  * Encourage use of .simplecov to avoid lost files. See [#338](https://github.com/colszowka/simplecov/pull/338). thanks @dankohn
-  * Specified in the gemspec that simplecov needs ruby 1.8.7. See [#343](https://github.com/colszowka/simplecov/pull/343). thanks @iainbeeston
-  * Fix mispointed link in CHANGELOG.md. See [#353](https://github.com/colszowka/simplecov/pull/353). Thanks @dleve123
-  * Improve command name docs. See [#356](https://github.com/colszowka/simplecov/pull/356). Thanks @gtd
-
-
-
-0.9.1, 2014-09-21 ([changes](https://github.com/colszowka/simplecov/compare/v0.9.0...v0.9.1))
-=================
-
-## Bugfixes
-
- * In 0.9.0, we introduced a regression that made SimpleCov no-op mode fail on Ruby 1.8, while
-   dropping 1.8 support altogether is announced only for v1.0. This has been fixed.
-   See [#333](https://github.com/colszowka/simplecov/issues/333) (thanks (@sferik)
-
-
-0.9.0, 2014-07-17 ([changes](https://github.com/colszowka/simplecov/compare/v0.8.2...v0.9.0))
-=================
-
-**A warm welcome and big thank you to the new contributors [@xaviershay](https://github.com/xaviershay), [@sferik](https://github.com/sferik) and especially [@bf4](https://github.com/bf4) for tackling a whole lot of issues and pull requests for this release!**
-
-## Enhancements
-
-  * New interface to specify multiple formatters.
-    See [#317](https://github.com/colszowka/simplecov/pull/317) (thanks @sferik)
-  * Document in the README how to exclude code from coverage reports,
-    and that the feature shouldn't be abused for skipping untested
-    private code.
-    See [#304](https://github.com/colszowka/simplecov/issues/304)
-  * Clarify Ruby version support.
-    See [#279](https://github.com/colszowka/simplecov/pull/279) (thanks @deivid-rodriguez)
-
-## Bugfixes
-
-  * Ensure calculations return Floats, not Fixnum or Rational. Fixes segfaults with mathn.
-    See [#245](https://github.com/colszowka/simplecov/pull/245) (thanks to @bf4)
-  * Using `Kernel.exit` instead of exit to avoid uncaught throw :IRB_EXIT when
-    exiting irb sessions.
-    See [#287](https://github.com/colszowka/simplecov/pull/287) (thanks @wless1)
-    See [#285](https://github.com/colszowka/simplecov/issues/285)
-  * Does not look for .simplecov in ~/ when $HOME is not set.
-    See [#311](https://github.com/colszowka/simplecov/pull/311) (thanks @lasseebert)
-  * Exit with code only if it's Numeric > 0.
-    See [#302](https://github.com/colszowka/simplecov/pull/302) (thanks @hajder)
-  * Make default filter case insensitive.
-    See [#280](https://github.com/colszowka/simplecov/pull/280) (thanks @ryanatball)
-  * Improve regexp that matches functional tests.
-    See [#276](https://github.com/colszowka/simplecov/pull/276) (thanks @sferik)
-  * Fix TravisCI [#272](https://github.com/colszowka/simplecov/pull/272) [#278](https://github.com/colszowka/simplecov/pull/278), [#302](https://github.com/colszowka/simplecov/pull/302)
-  * Fix global config load.
-    See [#311](https://github.com/colszowka/simplecov/pull/311) (thanks @lasseebert)
-
-v0.8.2, 2013-11-20 ([changes](https://github.com/colszowka/simplecov/compare/v0.8.1...v0.8.2))
-==================
-
-## Bugfixes
-
-  * Replaced the locking behaviour [via lockfile gem](https://github.com/colszowka/simplecov/pull/185) with
-    plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well
-    on Windows again.
-    See [#258](https://github.com/colszowka/simplecov/issues/258) and
-    [#223](https://github.com/colszowka/simplecov/pull/223) (thanks to @tomykaira)
-
-v0.8.1, 2013-11-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.8.0...v0.8.1))
-==================
-
-## Bugfixes
-
-  * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly.
-    See [#256](https://github.com/colszowka/simplecov/pull/256) (thanks to @kylev)
-
-v0.8.0, 2013-11-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.7.1...v0.8.0))
-==================
-
-**Note: Yanked the same day because of the regression that 0.8.1 fixes, see above**
-
-## TL;DR
-
-It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself
-quite stable in most circumstances. This release brings various further stability improvements to result set merging
-(especially when working with parallel_tests), the configuration, source file encodings, and command name guessing.
-
-The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in
-Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning
-has been added.
-
-## Features
-
-  * Configuration blocks now have access to variables and methods outside of the block's scope.
-    See [#238](https://github.com/colszowka/simplecov/pull/238) (thanks to @ms-tg)
-  * You can now have a global `~/.simplecov` configuration file.
-    See [#195](https://github.com/colszowka/simplecov/pull/195) (thanks to @spagalloco)
-  * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files,
-    including retaining the currently open file on refresh have been added.
-    See [simplecov-html #15](https://github.com/colszowka/simplecov-html/pull/15) (thanks to @chetan)
-  * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`.
-    See [#181](https://github.com/colszowka/simplecov/pull/181) and
-    [#203](https://github.com/colszowka/simplecov/pull/203) (thanks to @semanticart and @phallstrom)
-  * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'`
-    or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting
-    dropped by using this. See [#209](https://github.com/colszowka/simplecov/pull/209) (thanks to @ileitch)
-  * The result set merging now uses the `lockfile` gem to avoid race conditions.
-    See [#185](https://github.com/colszowka/simplecov/pull/185) (thanks to @jshraibman-mdsol).
-  * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly,
-    See [#64](https://github.com/colszowka/simplecov/issues/64) and
-    [#185](https://github.com/colszowka/simplecov/pull/185) (thanks to @jshraibman-mdsol).
-
-## Enhancements
-
-  * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are
-    deprecated, but remain available for now.
-    See [#207](https://github.com/colszowka/simplecov/pull/207) (thanks to @mikerobe)
-  * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now
-    be correctly attributed to RSpec, not Cucumber.
-    See [#212](https://github.com/colszowka/simplecov/pull/212) (thanks to @ersatzryan and @betelgeuse)
-  * MiniTest should now be identified correctly by the command name guesser.
-    See [#244](https://github.com/colszowka/simplecov/pull/244) (thanks to @envygeeks)
-  * Makes SimpleCov resilient to inclusion of mathn library.
-    See [#175](https://github.com/colszowka/simplecov/pull/175) and
-    [#140](https://github.com/colszowka/simplecov/issues/140) (thanks to @scotje)
-  * Allow coverage_dir to be an absolute path.
-  * See [#190](https://github.com/colszowka/simplecov/pull/190) (thanks to @jshraibman-mdsol)
-  * The internal cucumber test suite now uses Capybara 2.
-    See [#206](https://github.com/colszowka/simplecov/pull/206) (thanks to @infertux)
-  * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI.
-    See [#174](https://github.com/colszowka/simplecov/pull/174) (thanks to @grddev)
-  * Fix warning: instance variable @exit_status not initialized.
-    See [#242](https://github.com/colszowka/simplecov/pull/242) and
-    [#213](https://github.com/colszowka/simplecov/pull/213) (thanks to @sferik and @infertux)
-
-## Bugfixes
-
-  * Correct result calculations for people using :nocov: tags.
-    See [#215](https://github.com/colszowka/simplecov/pull/215) (thanks to @aokolish)
-  * Average hits per line for groups of files is now computed correctly.
-    See [#192](http://github.com/colszowka/simplecov/pull/192) and
-    [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @graysonwright)
-  * Compatability with BINARY internal encoding.
-    See [#194](https://github.com/colszowka/simplecov/pull/194) and
-    [#127](https://github.com/colszowka/simplecov/issues/127) (thanks to @justfalter)
-  * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp.
-    See [#204](https://github.com/colszowka/simplecov/issues/204) and
-    [#237](https://github.com/colszowka/simplecov/pull/237) (thanks to @rli9)
-
-v0.7.1, 2012-10-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.7.0...v0.7.1))
-==================
-
-  * [BUGFIX] The gem packages of 0.7.0 (both simplecov and simplecov-html) pushed to Rubygems had some file
-    permission issues, leading to problems when installing SimpleCov in a root/system Rubygems install and then
-    trying to use it as a normal user (see https://github.com/colszowka/simplecov/issues/171, thanks @envygeeks
-    for bringing it up). The gem build process has been changed to always enforce proper permissions before packaging
-    to avoid this issue in the future.
-
-
-v0.7.0, 2012-10-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.4...v0.7.0))
-==================
-
-  * [FEATURE] The new `maximum_coverage_drop` and `minimum_coverage` now allow you to fail your build when the
-    coverage dropped by more than what you allowed or is below a minimum value required. Also, `refuse_coverage_drop` disallows
-    any coverage drops between test runs.
-    See https://github.com/colszowka/simplecov/pull/151, https://github.com/colszowka/simplecov/issues/11,
-    https://github.com/colszowka/simplecov/issues/90, and https://github.com/colszowka/simplecov/issues/96 (thanks to @infertux)
-  * [FEATURE] SimpleCov now ships with a built-in MultiFormatter which allows the easy usage of multiple result formatters at
-    the same time without the need to write custom wrapper code.
-    See https://github.com/colszowka/simplecov/pull/158 (thanks to @nikitug)
-  * [BUGFIX] The usage of digits, hyphens and underscores in group names could lead to broken tab navigation
-    in the default simplecov-html reports. See https://github.com/colszowka/simplecov-html/pull/14 (thanks to @ebelgarts)
-  * [REFACTORING] A few more ruby warnings removed. See https://github.com/colszowka/simplecov/issues/106 and
-    https://github.com/colszowka/simplecov/pull/139. (thanks to @lukejahnke)
-  * A [Pledgie button](https://github.com/colszowka/simplecov/commit/63cfa99f8658fa5cc66a38c83b3195fdf71b9e93) for those that
-    feel generous :)
-  * The usual bunch of README fixes and documentation tweaks. Thanks to everyone who contributed those!
-
-v0.6.4, 2012-05-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.3...v0.6.4))
-==================
-
-  * [BUGFIX] Encoding issues with ISO-8859-encoded source files fixed.
-    See https://github.com/colszowka/simplecov/pull/117. (thanks to @Deradon)
-  * [BUGFIX] Ensure ZeroDivisionErrors won't occur when calculating the coverage result, which previously
-    could happen in certain cases. See https://github.com/colszowka/simplecov/pull/128. (thanks to @japgolly)
-  * [REFACTORING] Changed a couple instance variable lookups so SimpleCov does not cause a lot of warnings when
-    running ruby at a higher warning level. See https://github.com/colszowka/simplecov/issues/106 and
-    https://github.com/colszowka/simplecov/pull/119. (thanks to @mvz and @gioele)
-
-
-v0.6.3, 2012-05-10 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.2...v0.6.3))
-==================
-
-  * [BUGFIX] Modified the API-changes for newer multi_json versions introduced with #122 and v0.6.2 so
-    they are backwards-compatible with older multi_json gems in order to avoid simplecov polluting
-    the multi_json minimum version requirement for entire applications.
-    See https://github.com/colszowka/simplecov/issues/132
-  * Added appraisal gem to the test setup in order to run the test suite against both 1.0 and 1.3
-    multi_json gems and ensure the above actually works :)
-
-v0.6.2, 2012-04-20 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.1...v0.6.2))
-==================
-
-  * [Updated to latest version of MultiJSON and its new API (thanks to @sferik and @ronen).
-    See https://github.com/colszowka/simplecov/pull/122
-
-v0.6.1, 2012-02-24 ([changes](https://github.com/colszowka/simplecov/compare/v0.6.0...v0.6.1))
-==================
-
-  * [BUGFIX] Don't force-load Railtie on Rails < 3. Fixes regression introduced with
-    #83. See https://github.com/colszowka/simplecov/issues/113
-
-v0.6.0, 2012-02-22 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.4...v0.6.0))
-==================
-
-  * [FEATURE] Auto-magic `rake simplecov` task for rails
-    (see https://github.com/colszowka/simplecov/pull/83, thanks @sunaku)
-  * [BUGFIX] Treat source files as UTF-8 to avoid encoding errors
-    (see https://github.com/colszowka/simplecov/pull/103, thanks @joeyates)
-  * [BUGFIX] Store the invoking terminal command right after loading so they are safe from
-    other libraries tampering with ARGV. Among other makes automatic Rails test suite splitting
-    (Unit/Functional/Integration) work with recent rake versions again
-    (see https://github.com/colszowka/simplecov/issues/110)
-  * [FEATURE] If guessing command name from the terminal command fails, try guessing from defined constants
-    (see https://github.com/colszowka/simplecov/commit/37afca54ef503c33d888e910f950b3b943cb9a6c)
-  * Some refactorings and cleanups as usual. Please refer to the github compare view for a full
-    list of changes: https://github.com/colszowka/simplecov/compare/v0.5.4...v0.6.0
-
-v0.5.4, 2011-10-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.3...v0.5.4))
-==================
-
-  * Do not give exit code 0 when there are exceptions prior to tests
-    (see https://github.com/colszowka/simplecov/issues/41, thanks @nbogie)
-  * The API for building custom filter classes is now more obvious, using #matches? instead of #passes? too.
-    (see https://github.com/colszowka/simplecov/issues/85, thanks @robinroestenburg)
-  * Mailers are now part of the Rails adapter as their own group (see
-    https://github.com/colszowka/simplecov/issues/79, thanks @geetarista)
-  * Removed fix for JRuby 1.6 RC1 float bug because it's been fixed
-    (see https://github.com/colszowka/simplecov/issues/86)
-  * Readme formatted in Markdown :)
-
-v0.5.3, 2011-09-13 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.2...v0.5.3))
-==================
-
-  * Fix for encoding issues that came from the nocov processing mechanism
-    (see https://github.com/colszowka/simplecov/issues/71)
-  * :nocov: lines are now actually being reflected in the HTML report and are marked in yellow.
-
-  * The Favicon in the HTML report is now determined by the overall coverage and will have the color
-    that the coverage percentage gets as a css class to immediately indicate coverage status on first sight.
-
-  * Introduced SimpleCov::SourceFile::Line#status method that returns the coverage status
-    as a string for this line - made SimpleCov::HTML use that.
-  * Refactored nocov processing and made it configurable using SimpleCov.ncov_token (or it's
-    alias SimpleCov.skip_token)
-
-v0.5.2, 2011-09-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.1...v0.5.2))
-==================
-
-  * Another fix for a bug in JSON processing introduced with MultiJSON in 0.5.1
-    (see https://github.com/colszowka/simplecov/pull/75, thanks @sferik)
-
-v0.5.1, 2011-09-12 ([changes](https://github.com/colszowka/simplecov/compare/v0.5.0...v0.5.1))
-==================
-**Note: Yanked 2011-09-12 because the MultiJSON-patch had a crucial bug**
-
-  * Fix for invalid gemspec dependency string (see https://github.com/colszowka/simplecov/pull/70,
-    http://blog.rubygems.org/2011/08/31/shaving-the-yaml-yacc.html, thanks @jspradlin)
-
-  * Added JSON in the form of the multi_json gem as dependency for those cases when built-in JSON
-    is unavailable (see https://github.com/colszowka/simplecov/issues/72
-    and https://github.com/colszowka/simplecov/pull/74, thanks @sferik)
-
-v0.5.0, 2011-09-09 ([changes](https://github.com/colszowka/simplecov/compare/v0.4.2...v0.5.4))
-==================
-**Note: Yanked 2011-09-09 because of trouble with the gemspec.**
-
-  * JSON is now used instead of YAML for resultset caching (used for merging). Should resolve
-    a lot of problems people used to have because of YAML parser errors.
-
-  * There's a new adapter 'test_frameworks'. Use it outside of Rails to remove `test/`,
-    `spec/`, `features/` and `autotest/` dirs from your coverage reports, either directly
-    with `SimpleCov.start 'test_frameworks'` or with `SimpleCov.load_adapter 'test_frameworks'`
-
-  * SimpleCov configuration can now be placed centrally in a text file `.simplecov`, which will
-    be automatically read on `require 'simplecov'`. This makes using custom configuration like
-    groups and filters across your test suites much easier as you only have to specify your config
-    once. Just put the whole `SimpleCov.start (...)` code into `APP_ROOT/.simplecov`
-
-  * Lines can now be skipped by using the :nocov: flag in comments that wrap the code that should be
-    skipped, like in this example (thanks @phillipkoebbe)
-
-    <pre>
-      #:nocov:
-      def skipped
-        @foo * 2
-      end
-      #:nocov:
-    </pre>
-
-  * Moved file set coverage analytics from simplecov-html to SimpleCov::FileList, a new subclass
-    of Array that is always returned for SourceFile lists (i.e. in groups) and can now be used
-    in all formatters without the need to roll your own.
-
-  * The exceptions you used to get after removing some code and re-running your tests because SimpleCov
-    couldn't find the cached source lines should be resolved (thanks @goneflyin)
-
-  * Coverage strength metric: Average hits/line per source file and result group (thanks @trans)
-
-  * Finally, SimpleCov has an extensive Cucumber test suite
-
-  * Full compatibility with Ruby 1.9.3.preview1
-
-### HTML Formatter:
-
-  * The display of source files has been improved a lot. Weird scrolling trouble, out-of-scope line hit counts
-    and such should be a thing of the past. Also, it is prettier now.
-  * Source files are now syntax highlighted
-  * File paths no longer have that annoying './' in front of them