cvss-suite 1.0.8 → 1.1.0

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/lib/simplecov/source_file.rb

@@ -1,190 +0,0 @@
-module SimpleCov
-  #
-  # Representation of a source file including it's coverage data, source code,
-  # source lines and featuring helpers to interpret that data.
-  #
-  class SourceFile
-    # Representation of a single line in a source file including
-    # this specific line's source code, line_number and code coverage,
-    # with the coverage being either nil (coverage not applicable, e.g. comment
-    # line), 0 (line not covered) or >1 (the amount of times the line was
-    # executed)
-    class Line
-      # The source code for this line. Aliased as :source
-      attr_reader :src
-      # The line number in the source file. Aliased as :line, :number
-      attr_reader :line_number
-      # The coverage data for this line: either nil (never), 0 (missed) or >=1 (times covered)
-      attr_reader :coverage
-      # Whether this line was skipped
-      attr_reader :skipped
-
-      # Lets grab some fancy aliases, shall we?
-      alias source src
-      alias line line_number
-      alias number line_number
-
-      def initialize(src, line_number, coverage)
-        fail ArgumentError, "Only String accepted for source" unless src.is_a?(String)
-        fail ArgumentError, "Only Fixnum accepted for line_number" unless line_number.is_a?(Fixnum)
-        fail ArgumentError, "Only Fixnum and nil accepted for coverage" unless coverage.is_a?(Fixnum) || coverage.nil?
-        @src         = src
-        @line_number = line_number
-        @coverage    = coverage
-        @skipped     = false
-      end
-
-      # Returns true if this is a line that should have been covered, but was not
-      def missed?
-        !never? && !skipped? && coverage.zero?
-      end
-
-      # Returns true if this is a line that has been covered
-      def covered?
-        !never? && !skipped? && coverage > 0
-      end
-
-      # Returns true if this line is not relevant for coverage
-      def never?
-        !skipped? && coverage.nil?
-      end
-
-      # Flags this line as skipped
-      def skipped!
-        @skipped = true
-      end
-
-      # Returns true if this line was skipped, false otherwise. Lines are skipped if they are wrapped with
-      # # :nocov: comment lines.
-      def skipped?
-        !!skipped
-      end
-
-      # The status of this line - either covered, missed, skipped or never. Useful i.e. for direct use
-      # as a css class in report generation
-      def status
-        return "skipped" if skipped?
-        return "never" if never?
-        return "missed" if missed?
-        return "covered" if covered?
-      end
-    end
-
-    # The full path to this source file (e.g. /User/colszowka/projects/simplecov/lib/simplecov/source_file.rb)
-    attr_reader :filename
-    # The array of coverage data received from the Coverage.result
-    attr_reader :coverage
-    # The source code for this file. Aliased as :source
-    attr_reader :src
-    alias source src
-
-    def initialize(filename, coverage)
-      @filename = filename
-      @coverage = coverage
-      File.open(filename, "rb") { |f| @src = f.readlines }
-    end
-
-    # Returns all source lines for this file as instances of SimpleCov::SourceFile::Line,
-    # and thus including coverage data. Aliased as :source_lines
-    def lines
-      return @lines if defined? @lines
-
-      # Warning to identify condition from Issue #56
-      if coverage.size > src.size
-        $stderr.puts "Warning: coverage data provided by Coverage [#{coverage.size}] exceeds number of lines in #{filename} [#{src.size}]"
-      end
-
-      # Initialize lines
-      @lines = []
-      src.each_with_index do |src, i|
-        @lines << SimpleCov::SourceFile::Line.new(src, i + 1, coverage[i])
-      end
-      process_skipped_lines!
-      @lines
-    end
-    alias source_lines lines
-
-    # Access SimpleCov::SourceFile::Line source lines by line number
-    def line(number)
-      lines[number - 1]
-    end
-
-    # The coverage for this file in percent. 0 if the file has no relevant lines
-    def covered_percent
-      return 100.0 if lines.length.zero? || lines.length == never_lines.count
-      relevant_lines = lines.count - never_lines.count - skipped_lines.count
-      if relevant_lines.zero?
-        0.0
-      else
-        Float(covered_lines.count * 100.0 / relevant_lines.to_f)
-      end
-    end
-
-    def covered_strength
-      return 0.0 if lines.length.zero? || lines.length == never_lines.count
-
-      lines_strength = 0
-      lines.each do |c|
-        lines_strength += c.coverage if c.coverage
-      end
-
-      effective_lines_count = Float(lines.count - never_lines.count - skipped_lines.count)
-
-      if effective_lines_count.zero?
-        0.0
-      else
-        strength = lines_strength / effective_lines_count
-        round_float(strength, 1)
-      end
-    end
-
-    # Returns all covered lines as SimpleCov::SourceFile::Line
-    def covered_lines
-      @covered_lines ||= lines.select(&:covered?)
-    end
-
-    # Returns all lines that should have been, but were not covered
-    # as instances of SimpleCov::SourceFile::Line
-    def missed_lines
-      @missed_lines ||= lines.select(&:missed?)
-    end
-
-    # Returns all lines that are not relevant for coverage as
-    # SimpleCov::SourceFile::Line instances
-    def never_lines
-      @never_lines ||= lines.select(&:never?)
-    end
-
-    # Returns all lines that were skipped as SimpleCov::SourceFile::Line instances
-    def skipped_lines
-      @skipped_lines ||= lines.select(&:skipped?)
-    end
-
-    # Returns the number of relevant lines (covered + missed)
-    def lines_of_code
-      covered_lines.count + missed_lines.count
-    end
-
-    # Will go through all source files and mark lines that are wrapped within # :nocov: comment blocks
-    # as skipped.
-    def process_skipped_lines!
-      skipping = false
-      lines.each do |line|
-        if line.src =~ /^([\s]*)#([\s]*)(\:#{SimpleCov.nocov_token}\:)/
-          skipping = !skipping
-        elsif skipping
-          line.skipped!
-        end
-      end
-    end
-
-  private
-
-    # ruby 1.9 could use Float#round(places) instead
-    # @return [Float]
-    def round_float(float, places)
-      factor = Float(10 * places)
-      Float((float * factor).round / factor)
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/lib/simplecov/version.rb

@@ -1,25 +0,0 @@
-module SimpleCov
-  version = "0.11.2"
-
-  def version.to_a
-    split(".").map(&:to_i)
-  end
-
-  def version.major
-    to_a[0]
-  end
-
-  def version.minor
-    to_a[1]
-  end
-
-  def version.patch
-    to_a[2]
-  end
-
-  def version.pre
-    to_a[3]
-  end
-
-  VERSION = version.freeze
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/simplecov.gemspec

@@ -1,27 +0,0 @@
-$LOAD_PATH.push File.expand_path("../lib", __FILE__)
-require "simplecov/version"
-
-Gem::Specification.new do |gem|
-  gem.name        = "simplecov"
-  gem.version     = SimpleCov::VERSION
-  gem.platform    = Gem::Platform::RUBY
-  gem.authors     = ["Christoph Olszowka"]
-  gem.email       = ["christoph at olszowka de"]
-  gem.homepage    = "http://github.com/colszowka/simplecov"
-  gem.description = %(Code coverage for Ruby 1.9+ with a powerful configuration library and automatic merging of coverage across test suites)
-  gem.summary     = gem.description
-  gem.license     = "MIT"
-
-  gem.required_ruby_version = ">= 1.8.7"
-
-  gem.add_dependency "json", "~> 1.8"
-  gem.add_dependency "simplecov-html", "~> 0.10.0"
-  gem.add_dependency "docile", "~> 1.1.0"
-
-  gem.add_development_dependency "bundler", "~> 1.9"
-
-  gem.files         = `git ls-files`.split("\n")
-  gem.test_files    = `git ls-files -- {test,spec,features}/*`.split("\n")
-  gem.executables   = `git ls-files -- bin/*`.split("\n").map { |f| File.basename(f) }
-  gem.require_paths = ["lib"]
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/1_8_fallbacks_spec.rb

@@ -1,29 +0,0 @@
-require "helper"
-
-# Tests that verify that on 1.8 versions of ruby, simplecov simply
-# does not launch and does not cause errors on the way
-#
-# TODO: This should be expanded upon all methods that could potentially
-# be called in a test/spec-helper simplecov config block
-#
-describe "Ruby 1.8 fallback" do
-  it "return false when calling SimpleCov.start" do
-    expect(SimpleCov.start).to be false
-  end
-
-  it "return false when calling SimpleCov.start with a block" do
-    expect(SimpleCov.start { fail "Shouldn't reach this!" }).to be false
-  end
-
-  it "return false when calling SimpleCov.configure with a block" do
-    expect(SimpleCov.configure { fail "Shouldn't reach this!" }).to be false
-  end
-
-  it "allow to define a profile" do
-    expect do
-      SimpleCov.profiles.define "testprofile" do
-        add_filter "/config/"
-      end
-    end.not_to raise_error
-  end
-end if RUBY_VERSION.start_with? "1.8"

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/command_guesser_spec.rb

@@ -1,46 +0,0 @@
-require "helper"
-
-describe SimpleCov::CommandGuesser do
-  subject { SimpleCov::CommandGuesser }
-  it 'correctly guesses "Unit Tests" for unit tests' do
-    subject.original_run_command = "/some/path/test/units/foo_bar_test.rb"
-    expect(subject.guess).to eq("Unit Tests")
-    subject.original_run_command = "test/units/foo.rb"
-    expect(subject.guess).to eq("Unit Tests")
-    subject.original_run_command = "test/foo.rb"
-    expect(subject.guess).to eq("Unit Tests")
-    subject.original_run_command = "test/{models,helpers,unit}/**/*_test.rb"
-    expect(subject.guess).to eq("Unit Tests")
-  end
-
-  it 'correctly guesses "Functional Tests" for functional tests' do
-    subject.original_run_command = "/some/path/test/functional/foo_bar_controller_test.rb"
-    expect(subject.guess).to eq("Functional Tests")
-    subject.original_run_command = "test/{controllers,mailers,functional}/**/*_test.rb"
-    expect(subject.guess).to eq("Functional Tests")
-  end
-
-  it 'correctly guesses "Integration Tests" for integration tests' do
-    subject.original_run_command = "/some/path/test/integration/foo_bar_controller_test.rb"
-    expect(subject.guess).to eq("Integration Tests")
-    subject.original_run_command = "test/integration/**/*_test.rb"
-    expect(subject.guess).to eq("Integration Tests")
-  end
-
-  it 'correctly guesses "Cucumber Features" for cucumber features' do
-    subject.original_run_command = "features"
-    expect(subject.guess).to eq("Cucumber Features")
-    subject.original_run_command = "cucumber"
-    expect(subject.guess).to eq("Cucumber Features")
-  end
-
-  it 'correctly guesses "RSpec" for RSpec' do
-    subject.original_run_command = "/some/path/spec/foo.rb"
-    expect(subject.guess).to eq("RSpec")
-  end
-
-  it "defaults to RSpec because RSpec constant is defined" do
-    subject.original_run_command = "some_arbitrary_command with arguments"
-    expect(subject.guess).to eq("RSpec")
-  end
-end if SimpleCov.usable?

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/deleted_source_spec.rb

@@ -1,12 +0,0 @@
-require "helper"
-
-# Test to verify correct handling of deleted files
-# See https://github.com/colszowka/simplecov/issues/9
-describe "A source file which is subsequently deleted" do
-  it "does not cause an error" do
-    Dir.chdir(File.join(File.dirname(__FILE__), "fixtures")) do
-      `ruby deleted_source_sample.rb`
-      expect($?.exitstatus).to be_zero
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/Gemfile

@@ -1,6 +0,0 @@
-source "https://rubygems.org"
-
-gem "simplecov", :path => "../../../"
-gem "rake"
-gem "rspec", ">= 2.6.0"
-gem "cucumber"

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/Rakefile

@@ -1,8 +0,0 @@
-require "bundler"
-
-require "rake/testtask"
-Rake::TestTask.new(:test) do |test|
-  test.libs << "lib" << "test"
-  test.test_files = FileList["test/**/*_test.rb"].sort
-  test.verbose = true
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/cucumber.yml

@@ -1,13 +0,0 @@
-<%
-rerun = File.file?('rerun.txt') ? IO.read('rerun.txt') : ""
-rerun_opts = rerun.to_s.strip.empty? ? "--format #{ENV['CUCUMBER_FORMAT'] || 'progress'} features" : "--format #{ENV['CUCUMBER_FORMAT'] || 'pretty'} #{rerun}"
-std_opts = "--format #{ENV['CUCUMBER_FORMAT'] || 'progress'} --strict --tags ~@wip"
-interp_opts = if defined?(RUBY_ENGINE)
-  " --tags ~@exclude-#{RUBY_ENGINE}"
-else
-  ''
-end
-%>
-default: <%= std_opts %><%= interp_opts %> features
-wip: --tags @wip:30 --wip features<%= interp_opts %>
-rerun: <%= rerun_opts %> --format rerun --out rerun.txt --strict --tags ~@wip<%= interp_opts %>

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/features/step_definitions/my_steps.rb

@@ -1,22 +0,0 @@
-Given /^I want to keep stuff simple$/ do
-  expect(1).to eq(1)
-end
-
-When /^I write my cukes for the fake project$/ do
-  expect(1).to eq(1)
-end
-
-Then /^I make all neccessary tests in a single step$/ do
-  expect(FakedProject.foo).to eq("bar")
-
-  expect(FrameworkSpecific.cucumber).to eq("Only tested in Cucumber")
-
-  expect(FakedProject.a_class_method).to eq("this is a mixed-in class method")
-
-  expect(FakedProject.new.an_instance_method).to eq("this is a mixed-in instance method")
-  expect(FakedProject.new.dynamic).to eq("A dynamically defined instance method")
-
-  something = SomeClass.new("foo")
-  expect(something.reverse).to eq("oof")
-  expect(something.compare_with("foo")).to be true
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/features/support/env.rb

@@ -1,12 +0,0 @@
-require "bundler/setup"
-
-# We're injecting simplecov_config via aruba in cucumber here
-# depending on what the test case is...
-begin
-  require File.join(File.dirname(__FILE__), "simplecov_config")
-rescue LoadError
-  $stderr.puts "No SimpleCov config file found!"
-end
-
-$LOAD_PATH.unshift(File.join(File.dirname(__FILE__), "/../../lib"))
-require "faked_project"

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/features/test_stuff.feature

@@ -1,6 +0,0 @@
-Feature: Foo
-
-  Scenario: Test stuff
-    Given I want to keep stuff simple
-    When I write my cukes for the fake project
-    Then I make all neccessary tests in a single step

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/lib/faked_project.rb

@@ -1,11 +0,0 @@
-class FakedProject
-  def self.foo
-    "bar"
-  end
-end
-
-Dir[File.join(File.dirname(__FILE__), "faked_project/*.rb")].reject { |f| /untested/.match(f) }.each do |file|
-  require file # Require all source files in project dynamically so we can inject some stuff depending on test situation
-end
-
-FakedProject.send :include, MetaMagic

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/lib/faked_project/framework_specific.rb

@@ -1,18 +0,0 @@
-# A pile of methods that only get tested in their frameworks
-# and thus make this file only 100% covered when all framework test
-# results are merged
-module FrameworkSpecific
-  class << self
-    def cucumber
-      "Only tested in Cucumber"
-    end
-
-    def rspec
-      "Only tested in RSpec"
-    end
-
-    def test_unit
-      "Only tested in Test/Unit"
-    end
-  end
-end

data/vendor/cache/ruby/2.2.0/gems/simplecov-0.11.2/spec/faked_project/lib/faked_project/meta_magic.rb

@@ -1,24 +0,0 @@
-module MetaMagic
-  module ClassMethods
-    def a_class_method
-      "this is a mixed-in class method"
-    end
-  end
-
-  module InstanceMethods
-    def an_instance_method
-      "this is a mixed-in instance method"
-    end
-  end
-
-  def self.included(base)
-    base.send :extend, ClassMethods
-    base.send :include, InstanceMethods
-
-    base.class_eval do
-      define_method :dynamic do
-        "A dynamically defined instance method"
-      end
-    end
-  end
-end