citypay_api_client 1.0.3 → 1.1.2

data/spec/models/paylink_token_created_spec.rb

@@ -0,0 +1,111 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkTokenCreated
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkTokenCreated do
+  let(:instance) { CityPayApiClient::PaylinkTokenCreated.new }
+
+  describe 'test an instance of PaylinkTokenCreated' do
+    it 'should create an instance of PaylinkTokenCreated' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkTokenCreated)
+    end
+  end
+  describe 'test attribute "attachments"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bps"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "date_created"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "errors"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "identifier"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mode"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "qr_code"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "result"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "server_version"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "source"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "token"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "url"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "usc"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_token_request_model_spec.rb

@@ -0,0 +1,91 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkTokenRequestModel
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkTokenRequestModel do
+
+  describe 'test an instance of PaylinkTokenRequestModel' do
+    it 'should create an instance of PaylinkTokenRequestModel' do
+    end
+  end
+  describe 'test attribute "accountno"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "amount"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "cardholder"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "cart"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "client_version"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "config"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "email"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "identifier"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "merchantid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "subscription_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tx_type"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_token_status_change_request_spec.rb

@@ -0,0 +1,57 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkTokenStatusChangeRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkTokenStatusChangeRequest do
+  let(:instance) { CityPayApiClient::PaylinkTokenStatusChangeRequest.new }
+
+  describe 'test an instance of PaylinkTokenStatusChangeRequest' do
+    it 'should create an instance of PaylinkTokenStatusChangeRequest' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkTokenStatusChangeRequest)
+    end
+  end
+  describe 'test attribute "after"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "max_results"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "merchantid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "next_token"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "order_by"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_token_status_change_response_spec.rb

@@ -0,0 +1,39 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkTokenStatusChangeResponse
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkTokenStatusChangeResponse do
+  let(:instance) { CityPayApiClient::PaylinkTokenStatusChangeResponse.new }
+
+  describe 'test an instance of PaylinkTokenStatusChangeResponse' do
+    it 'should create an instance of PaylinkTokenStatusChangeResponse' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkTokenStatusChangeResponse)
+    end
+  end
+  describe 'test attribute "next_token"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tokens"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_token_status_spec.rb

@@ -0,0 +1,195 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkTokenStatus
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkTokenStatus do
+  let(:instance) { CityPayApiClient::PaylinkTokenStatus.new }
+
+  describe 'test an instance of PaylinkTokenStatus' do
+    it 'should create an instance of PaylinkTokenStatus' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkTokenStatus)
+    end
+  end
+  describe 'test attribute "amount_paid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "auth_code"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "card"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "created"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "datetime"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "identifier"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_attachment"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_cancelled"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_closed"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_customer_receipt_email_sent"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_email_sent"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_expired"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_form_viewed"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_merchant_notification_email_sent"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_open_for_payment"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_paid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_payment_attempted"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_postback_ok"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_request_challenged"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_sms_sent"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "is_validated"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_event_date_time"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "last_payment_result"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "payment_attempts_count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "state_history"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "token"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "trans_no"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_ui_spec.rb

@@ -0,0 +1,51 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkUI
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkUI do
+  let(:instance) { CityPayApiClient::PaylinkUI.new }
+
+  describe 'test an instance of PaylinkUI' do
+    it 'should create an instance of PaylinkUI' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkUI)
+    end
+  end
+  describe 'test attribute "address_mandatory"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "form_auto_complete"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "ordering"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "postcode_mandatory"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/process_batch_request_spec.rb

@@ -0,0 +1,49 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.3.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::ProcessBatchRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::ProcessBatchRequest do
+
+  describe 'test an instance of ProcessBatchRequest' do
+    it 'should create an instance of ProcessBatchRequest' do
+    end
+  end
+  describe 'test attribute "account_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "batch_date"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "batch_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "transactions"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/process_batch_response_spec.rb

@@ -0,0 +1,39 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.3.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::ProcessBatchResponse
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::ProcessBatchResponse do
+  let(:instance) { CityPayApiClient::ProcessBatchResponse.new }
+
+  describe 'test an instance of ProcessBatchResponse' do
+    it 'should create an instance of ProcessBatchResponse' do
+      expect(instance).to be_instance_of(CityPayApiClient::ProcessBatchResponse)
+    end
+  end
+  describe 'test attribute "message"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "valid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end