citypay_api_client 1.0.3 → 1.1.2

data/lib/citypay_api_client/models/paylink_token_status_change_request.rb

@@ -0,0 +1,269 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is an HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokenized payments using cardholder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](https://citypay.github.io/api-docs/payment-api/#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive cardholder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 7.2.0
+
+=end
+
+require 'date'
+require 'time'
+
+module CityPayApiClient
+  class PaylinkTokenStatusChangeRequest
+    # identifies the date and time to lookup changes after.
+    attr_accessor :after
+
+    # the maximum number of results between 5 and 250 to return. Default is 50.
+    attr_accessor :max_results
+
+    # the merchant id to review tokens for.
+    attr_accessor :merchantid
+
+    # the next token value when more results are available.
+    attr_accessor :next_token
+
+    attr_accessor :order_by
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'after' => :'after',
+        :'max_results' => :'maxResults',
+        :'merchantid' => :'merchantid',
+        :'next_token' => :'nextToken',
+        :'order_by' => :'orderBy'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'after' => :'Time',
+        :'max_results' => :'Integer',
+        :'merchantid' => :'Integer',
+        :'next_token' => :'String',
+        :'order_by' => :'Array<String>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `CityPayApiClient::PaylinkTokenStatusChangeRequest` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `CityPayApiClient::PaylinkTokenStatusChangeRequest`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'after')
+        self.after = attributes[:'after']
+      else
+        self.after = nil
+      end
+
+      if attributes.key?(:'max_results')
+        self.max_results = attributes[:'max_results']
+      end
+
+      if attributes.key?(:'merchantid')
+        self.merchantid = attributes[:'merchantid']
+      else
+        self.merchantid = nil
+      end
+
+      if attributes.key?(:'next_token')
+        self.next_token = attributes[:'next_token']
+      end
+
+      if attributes.key?(:'order_by')
+        if (value = attributes[:'order_by']).is_a?(Array)
+          self.order_by = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      if @after.nil?
+        invalid_properties.push('invalid value for "after", after cannot be nil.')
+      end
+
+      if @merchantid.nil?
+        invalid_properties.push('invalid value for "merchantid", merchantid cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      return false if @after.nil?
+      return false if @merchantid.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          after == o.after &&
+          max_results == o.max_results &&
+          merchantid == o.merchantid &&
+          next_token == o.next_token &&
+          order_by == o.order_by
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [after, max_results, merchantid, next_token, order_by].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def self._deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_any_of) || klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/citypay_api_client/models/paylink_token_status_change_response.rb

@@ -0,0 +1,232 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is an HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokenized payments using cardholder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](https://citypay.github.io/api-docs/payment-api/#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive cardholder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 7.2.0
+
+=end
+
+require 'date'
+require 'time'
+
+module CityPayApiClient
+  class PaylinkTokenStatusChangeResponse
+    # If nextToken is returned, there are more results available. The value of nextToken is a unique pagination token for each page. Make the call again using the returned token to retrieve the next page. Keep all other arguments unchanged. 
+    attr_accessor :next_token
+
+    attr_accessor :tokens
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'next_token' => :'nextToken',
+        :'tokens' => :'tokens'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'next_token' => :'String',
+        :'tokens' => :'Array<PaylinkTokenStatus>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `CityPayApiClient::PaylinkTokenStatusChangeResponse` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `CityPayApiClient::PaylinkTokenStatusChangeResponse`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'next_token')
+        self.next_token = attributes[:'next_token']
+      end
+
+      if attributes.key?(:'tokens')
+        if (value = attributes[:'tokens']).is_a?(Array)
+          self.tokens = value
+        end
+      else
+        self.tokens = nil
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      if @tokens.nil?
+        invalid_properties.push('invalid value for "tokens", tokens cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      return false if @tokens.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          next_token == o.next_token &&
+          tokens == o.tokens
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [next_token, tokens].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def self._deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_any_of) || klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end