citypay_api_client 1.0.3 → 1.1.2

data/lib/citypay_api_client/models/paylink_token_request_model.rb

@@ -0,0 +1,427 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is an HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokenized payments using cardholder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](https://citypay.github.io/api-docs/payment-api/#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive cardholder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 7.2.0
+
+=end
+
+require 'date'
+require 'time'
+
+module CityPayApiClient
+  class PaylinkTokenRequestModel
+    # Specifies an alpha-numeric account number that the Paylink service uses when creating a Cardholder Account. The value should be no longer than 20 characters in length.
+    attr_accessor :accountno
+
+    # Specifies the intended value of the transaction in the lowest denomination with no spacing characters or decimal point. This is the net total to be processed. An example of £74.95 would be presented as 7495.
+    attr_accessor :amount
+
+    attr_accessor :cardholder
+
+    attr_accessor :cart
+
+    # The clientVersion field is used to specify the version of your application that has invoked the Paylink payment process. This feature is typically used for tracing issues relating to application deployments, or any Paylink integration module or plugin.
+    attr_accessor :client_version
+
+    attr_accessor :config
+
+    # A currency for the token. This value should be only used on multi-currency accounts and be an appropriate currency which the account is configured for.
+    attr_accessor :currency
+
+    # The email field is used for the Merchant to be notified on completion of the transaction . The value may be supplied to override the default stored value. Emails sent to this address by the Paylink service should not be forwarded on to the cardholder as it may contain certain information that is used by the Paylink service to validate and authenticate Paylink Token Requests: for example, the Merchant ID and the licence key. 
+    attr_accessor :email
+
+    # Identifies a particular transaction linked to a Merchant account. It enables accurate duplicate checking within a pre-configured time period, as well as transaction reporting and tracing. The identifier should be unique to prevent payment card processing attempts from being rejected due to duplication. 
+    attr_accessor :identifier
+
+    # The merchant id you wish to process this transaction with.
+    attr_accessor :merchantid
+
+    # True if the intent of this cardholder initiated transaction is to establish a recurring payment model, processable as merchant initiated transactions.
+    attr_accessor :recurring
+
+    # an id associated with a subscription to link the token request against.
+    attr_accessor :subscription_id
+
+    # A value to override the transaction type if requested by your account manager.
+    attr_accessor :tx_type
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'accountno' => :'accountno',
+        :'amount' => :'amount',
+        :'cardholder' => :'cardholder',
+        :'cart' => :'cart',
+        :'client_version' => :'client_version',
+        :'config' => :'config',
+        :'currency' => :'currency',
+        :'email' => :'email',
+        :'identifier' => :'identifier',
+        :'merchantid' => :'merchantid',
+        :'recurring' => :'recurring',
+        :'subscription_id' => :'subscription_id',
+        :'tx_type' => :'tx_type'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'accountno' => :'String',
+        :'amount' => :'Integer',
+        :'cardholder' => :'PaylinkCardHolder',
+        :'cart' => :'PaylinkCart',
+        :'client_version' => :'String',
+        :'config' => :'PaylinkConfig',
+        :'currency' => :'String',
+        :'email' => :'String',
+        :'identifier' => :'String',
+        :'merchantid' => :'Integer',
+        :'recurring' => :'Boolean',
+        :'subscription_id' => :'String',
+        :'tx_type' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `CityPayApiClient::PaylinkTokenRequestModel` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `CityPayApiClient::PaylinkTokenRequestModel`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'accountno')
+        self.accountno = attributes[:'accountno']
+      end
+
+      if attributes.key?(:'amount')
+        self.amount = attributes[:'amount']
+      else
+        self.amount = nil
+      end
+
+      if attributes.key?(:'cardholder')
+        self.cardholder = attributes[:'cardholder']
+      end
+
+      if attributes.key?(:'cart')
+        self.cart = attributes[:'cart']
+      end
+
+      if attributes.key?(:'client_version')
+        self.client_version = attributes[:'client_version']
+      end
+
+      if attributes.key?(:'config')
+        self.config = attributes[:'config']
+      end
+
+      if attributes.key?(:'currency')
+        self.currency = attributes[:'currency']
+      end
+
+      if attributes.key?(:'email')
+        self.email = attributes[:'email']
+      end
+
+      if attributes.key?(:'identifier')
+        self.identifier = attributes[:'identifier']
+      else
+        self.identifier = nil
+      end
+
+      if attributes.key?(:'merchantid')
+        self.merchantid = attributes[:'merchantid']
+      else
+        self.merchantid = nil
+      end
+
+      if attributes.key?(:'recurring')
+        self.recurring = attributes[:'recurring']
+      end
+
+      if attributes.key?(:'subscription_id')
+        self.subscription_id = attributes[:'subscription_id']
+      end
+
+      if attributes.key?(:'tx_type')
+        self.tx_type = attributes[:'tx_type']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      if @amount.nil?
+        invalid_properties.push('invalid value for "amount", amount cannot be nil.')
+      end
+
+      if !@currency.nil? && @currency.to_s.length > 3
+        invalid_properties.push('invalid value for "currency", the character length must be smaller than or equal to 3.')
+      end
+
+      if !@currency.nil? && @currency.to_s.length < 3
+        invalid_properties.push('invalid value for "currency", the character length must be great than or equal to 3.')
+      end
+
+      if !@email.nil? && @email.to_s.length > 254
+        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 254.')
+      end
+
+      if @identifier.nil?
+        invalid_properties.push('invalid value for "identifier", identifier cannot be nil.')
+      end
+
+      if @identifier.to_s.length > 50
+        invalid_properties.push('invalid value for "identifier", the character length must be smaller than or equal to 50.')
+      end
+
+      if @identifier.to_s.length < 4
+        invalid_properties.push('invalid value for "identifier", the character length must be great than or equal to 4.')
+      end
+
+      if @merchantid.nil?
+        invalid_properties.push('invalid value for "merchantid", merchantid cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      return false if @amount.nil?
+      return false if !@currency.nil? && @currency.to_s.length > 3
+      return false if !@currency.nil? && @currency.to_s.length < 3
+      return false if !@email.nil? && @email.to_s.length > 254
+      return false if @identifier.nil?
+      return false if @identifier.to_s.length > 50
+      return false if @identifier.to_s.length < 4
+      return false if @merchantid.nil?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] currency Value to be assigned
+    def currency=(currency)
+      if currency.nil?
+        fail ArgumentError, 'currency cannot be nil'
+      end
+
+      if currency.to_s.length > 3
+        fail ArgumentError, 'invalid value for "currency", the character length must be smaller than or equal to 3.'
+      end
+
+      if currency.to_s.length < 3
+        fail ArgumentError, 'invalid value for "currency", the character length must be great than or equal to 3.'
+      end
+
+      @currency = currency
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] email Value to be assigned
+    def email=(email)
+      if email.nil?
+        fail ArgumentError, 'email cannot be nil'
+      end
+
+      if email.to_s.length > 254
+        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 254.'
+      end
+
+      @email = email
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] identifier Value to be assigned
+    def identifier=(identifier)
+      if identifier.nil?
+        fail ArgumentError, 'identifier cannot be nil'
+      end
+
+      if identifier.to_s.length > 50
+        fail ArgumentError, 'invalid value for "identifier", the character length must be smaller than or equal to 50.'
+      end
+
+      if identifier.to_s.length < 4
+        fail ArgumentError, 'invalid value for "identifier", the character length must be great than or equal to 4.'
+      end
+
+      @identifier = identifier
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          accountno == o.accountno &&
+          amount == o.amount &&
+          cardholder == o.cardholder &&
+          cart == o.cart &&
+          client_version == o.client_version &&
+          config == o.config &&
+          currency == o.currency &&
+          email == o.email &&
+          identifier == o.identifier &&
+          merchantid == o.merchantid &&
+          recurring == o.recurring &&
+          subscription_id == o.subscription_id &&
+          tx_type == o.tx_type
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [accountno, amount, cardholder, cart, client_version, config, currency, email, identifier, merchantid, recurring, subscription_id, tx_type].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def self._deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_any_of) || klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end