citypay_api_client 1.0.3 → 1.1.2

data/spec/models/bin_spec.rb

@@ -0,0 +1,81 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.3.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::Bin
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::Bin do
+  let(:instance) { CityPayApiClient::Bin.new }
+
+  describe 'test an instance of Bin' do
+    it 'should create an instance of Bin' do
+      expect(instance).to be_instance_of(CityPayApiClient::Bin)
+    end
+  end
+  describe 'test attribute "bin_commercial"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_corporate"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_country_issued"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_credit"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_currency"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_debit"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_description"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bin_eu"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "scheme"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/capture_request_spec.rb

@@ -19,7 +19,6 @@ require 'date'
 describe 'CaptureRequest' do
   before do
     # run before each test
-    @instance = CityPayApiClient::CaptureRequest.new
   end
 
   after do
@@ -28,7 +27,6 @@ describe 'CaptureRequest' do
 
   describe 'test an instance of CaptureRequest' do
     it 'should create an instance of CaptureRequest' do
-      expect(@instance).to be_instance_of(CityPayApiClient::CaptureRequest)
     end
   end
   describe 'test attribute "airline_data"' do

data/spec/models/card_holder_account_spec.rb

@@ -19,8 +19,8 @@ require 'date'
 describe 'CardHolderAccount' do
   before do
     # run before each test
-    @instance = CityPayApiClient::CardHolderAccount.new
-    json = '{"CardHolderAccount": {
+
+    json = '{
         "account_id": "abc123",
         "cards": [{
                       "bin_commercial": false,
@@ -58,7 +58,8 @@ describe 'CardHolderAccount' do
         "default_card_index": 0,
         "status": "ACTIVE",
         "unique_id": "Ew3BKeWNdL3qKQU7XK7Sbt2eAL5WFW4AfoASDSA"
-    }}'
+    }'
+
     data = JSON.parse(json, :symbolize_names => true)
     @account = CityPayApiClient::ApiClient.new.convert_to_type(data, "CardHolderAccount")
   end
@@ -75,7 +76,6 @@ describe 'CardHolderAccount' do
 
   describe 'test an instance of CardHolderAccount' do
     it 'should create an instance of CardHolderAccount' do
-      expect(@instance).to be_instance_of(CityPayApiClient::CardHolderAccount)
     end
   end
   describe 'test attribute "account_id"' do
@@ -103,6 +103,7 @@ describe 'CardHolderAccount' do
       expect(@c.label2).to eq("TestVisa/0002,Exp:7/2022")
       expect(@c.scheme).to eq("TestVisa")
       expect(@c.token).to eq("ctPCzxq4WxEwWbkG7whRPLRCG27vYFNzsEDNihYmDwqsBc5QEXnFRvq2j5oRyb56ErRVEQaBN7PFMEDtjQQXDQpfxKkp3AxbyeGo61RhKBjFTFegaP4LBZUxFZimsXW8Deae9VyhWSgS2o8AXzTJU9UP3bo8kRcpataxuH3fJj3JHDnyeZt")
+      expect(@account.cards.length).to eq(1)
     end
   end
 
@@ -127,7 +128,7 @@ describe 'CardHolderAccount' do
 
   describe 'test attribute "date_created"' do
     it 'should work' do
-      expect(@account.date_created).to eq(DateTime.parse("2020-08-01T09:15:24Z"))
+      expect(@account.date_created).to eq(Time.parse("2020-08-01T09:15:24Z"))
     end
   end
 
@@ -139,7 +140,7 @@ describe 'CardHolderAccount' do
 
   describe 'test attribute "default_card_index"' do
     it 'should work' do
-      expect(@account.default_card_index).to eq("0")
+      expect(@account.default_card_index).to eq(0)
     end
   end
 
@@ -155,4 +156,4 @@ describe 'CardHolderAccount' do
     end
   end
 
-end
+end

data/spec/models/charge_request_spec.rb

@@ -19,7 +19,6 @@ require 'date'
 describe 'ChargeRequest' do
   before do
     # run before each test
-    @instance = CityPayApiClient::ChargeRequest.new
   end
 
   after do
@@ -28,7 +27,6 @@ describe 'ChargeRequest' do
 
   describe 'test an instance of ChargeRequest' do
     it 'should create an instance of ChargeRequest' do
-      expect(@instance).to be_instance_of(CityPayApiClient::ChargeRequest)
     end
   end
   describe 'test attribute "amount"' do

data/spec/models/check_batch_status_response_spec.rb

@@ -0,0 +1,45 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.3.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::CheckBatchStatusResponse
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::CheckBatchStatusResponse do
+  let(:instance) { CityPayApiClient::CheckBatchStatusResponse.new }
+
+  describe 'test an instance of CheckBatchStatusResponse' do
+    it 'should create an instance of CheckBatchStatusResponse' do
+      expect(instance).to be_instance_of(CityPayApiClient::CheckBatchStatusResponse)
+    end
+  end
+  describe 'test attribute "batch_date"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "batch_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "batch_status"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/check_batch_status_spec.rb

@@ -0,0 +1,39 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.3.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::CheckBatchStatus
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::CheckBatchStatus do
+  let(:instance) { CityPayApiClient::CheckBatchStatus.new }
+
+  describe 'test an instance of CheckBatchStatus' do
+    it 'should create an instance of CheckBatchStatus' do
+      expect(instance).to be_instance_of(CityPayApiClient::CheckBatchStatus)
+    end
+  end
+  describe 'test attribute "account_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "batch_id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/decision_spec.rb

@@ -125,7 +125,7 @@ describe 'Decision' do
       expect(response.context).to eq("20200812075906AAAGV4")
       expect(response.csc_result).to eq("C")
       expect(response.currency).to eq("GBP")
-      expect(response.datetime).to eq(DateTime.parse("2020-08-12T07:59:11Z"))
+      expect(response.datetime).to eq(Time.parse("2020-08-12T07:59:11Z"))
       expect(response.eci).to eq("0")
       expect(response.identifier).to eq("ident1")
       expect(response.live).to eq(true)

data/spec/models/direct_post_request_spec.rb

@@ -0,0 +1,151 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::DirectPostRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::DirectPostRequest do
+
+  describe 'test an instance of DirectPostRequest' do
+    it 'should create an instance of DirectPostRequest' do
+    end
+  end
+  describe 'test attribute "amount"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "avs_postcode_policy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "bill_to"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "cardnumber"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "csc"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "csc_policy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "currency"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "duplicate_policy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "expmonth"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "expyear"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "identifier"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mac"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "match_avsa"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name_on_card"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "nonce"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_failure"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_success"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "ship_to"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "threedsecure"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "trans_info"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "trans_type"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/direct_token_auth_request_spec.rb

@@ -0,0 +1,51 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::DirectTokenAuthRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::DirectTokenAuthRequest do
+  let(:instance) { CityPayApiClient::DirectTokenAuthRequest.new }
+
+  describe 'test an instance of DirectTokenAuthRequest' do
+    it 'should create an instance of DirectTokenAuthRequest' do
+      expect(instance).to be_instance_of(CityPayApiClient::DirectTokenAuthRequest)
+    end
+  end
+  describe 'test attribute "nonce"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_failure"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_success"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "token"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/domain_key_check_request_spec.rb

@@ -0,0 +1,31 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::DomainKeyCheckRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::DomainKeyCheckRequest do
+
+  describe 'test an instance of DomainKeyCheckRequest' do
+    it 'should create an instance of DomainKeyCheckRequest' do
+    end
+  end
+  describe 'test attribute "domain_key"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/domain_key_request_spec.rb

@@ -0,0 +1,45 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::DomainKeyRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::DomainKeyRequest do
+  let(:instance) { CityPayApiClient::DomainKeyRequest.new }
+
+  describe 'test an instance of DomainKeyRequest' do
+    it 'should create an instance of DomainKeyRequest' do
+      expect(instance).to be_instance_of(CityPayApiClient::DomainKeyRequest)
+    end
+  end
+  describe 'test attribute "domain"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "live"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "merchantid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/domain_key_response_spec.rb

@@ -0,0 +1,57 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::DomainKeyResponse
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::DomainKeyResponse do
+  let(:instance) { CityPayApiClient::DomainKeyResponse.new }
+
+  describe 'test an instance of DomainKeyResponse' do
+    it 'should create an instance of DomainKeyResponse' do
+      expect(instance).to be_instance_of(CityPayApiClient::DomainKeyResponse)
+    end
+  end
+  describe 'test attribute "date_created"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "domain"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "domain_key"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "live"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "merchantid"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end