ceedling 0.28.3 → 0.29.0

data/vendor/cmock/vendor/unity/examples/example_4/src/ProductionCode.h

@@ -0,0 +1,3 @@
+
+int FindFunction_WhichIsBroken(int NumberToFind);
+int FunctionWhichReturnsLocalVariable(void);

data/vendor/cmock/vendor/unity/examples/example_4/src/ProductionCode2.c

@@ -0,0 +1,11 @@
+
+#include "ProductionCode2.h"
+
+char* ThisFunctionHasNotBeenTested(int Poor, char* LittleFunction)
+{
+  (void)Poor;
+  (void)LittleFunction;
+  /* Since There Are No Tests Yet, This Function Could Be Empty For All We Know.
+   * Which isn't terribly useful... but at least we put in a TEST_IGNORE so we won't forget */
+  return (char*)0;
+}

data/vendor/cmock/vendor/unity/examples/example_4/src/ProductionCode2.h

@@ -0,0 +1,2 @@
+
+char* ThisFunctionHasNotBeenTested(int Poor, char* LittleFunction);

data/vendor/cmock/vendor/unity/examples/example_4/src/meson.build

@@ -0,0 +1,21 @@
+###################################################################################
+#                                                                                 #
+# NAME: meson.build                                                               #
+#                                                                                 #
+# AUTHOR: Mike Karlesky, Mark VanderVoord, Greg Williams.                         #
+# WRITTEN BY: Michael Brockus.                                                    #
+#                                                                                 #
+# License: MIT                                                                    #
+#                                                                                 #
+###################################################################################
+
+inc_dir = include_directories('.')
+lib_list = {'a': ['ProductionCode.c' ], 'b': ['ProductionCode2.c']}
+
+foreach lib, src : lib_list
+    set_variable(lib + '_lib', 
+        static_library(lib + '_lib', sources: src, include_directories: inc_dir))
+endforeach
+
+a_dep = declare_dependency(link_with: a_lib, include_directories: inc_dir)
+b_dep = declare_dependency(link_with: b_lib, include_directories: inc_dir)

data/vendor/cmock/vendor/unity/examples/example_4/subprojects/unity.wrap

@@ -0,0 +1,4 @@
+[wrap-git]
+directory = unity
+url = https://github.com/ThrowTheSwitch/Unity.git
+revision = head

data/vendor/cmock/vendor/unity/examples/example_4/test/TestProductionCode.c

@@ -0,0 +1,63 @@
+
+#include "ProductionCode.h"
+#include "unity.h"
+
+/* sometimes you may want to get at local data in a module.
+ * for example: If you plan to pass by reference, this could be useful
+ * however, it should often be avoided */
+extern int Counter;
+
+void setUp(void)
+{
+  /* This is run before EACH TEST */
+  Counter = 0x5a5a;
+}
+
+void tearDown(void)
+{
+}
+
+
+void test_FindFunction_WhichIsBroken_ShouldReturnZeroIfItemIsNotInList_WhichWorksEvenInOurBrokenCode(void)
+{
+  /* All of these should pass */
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(78));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(2));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(33));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(999));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(-1));
+}
+
+void test_FindFunction_WhichIsBroken_ShouldReturnTheIndexForItemsInList_WhichWillFailBecauseOurFunctionUnderTestIsBroken(void)
+{
+  /* You should see this line fail in your test summary */
+  TEST_ASSERT_EQUAL(1, FindFunction_WhichIsBroken(34));
+
+  /* Notice the rest of these didn't get a chance to run because the line above failed.
+   * Unit tests abort each test function on the first sign of trouble.
+   * Then NEXT test function runs as normal. */
+  TEST_ASSERT_EQUAL(8, FindFunction_WhichIsBroken(8888));
+}
+
+void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValue(void)
+{
+    /* This should be true because setUp set this up for us before this test */
+    TEST_ASSERT_EQUAL_HEX(0x5a5a, FunctionWhichReturnsLocalVariable());
+
+    /* This should be true because we can still change our answer */
+    Counter = 0x1234;
+    TEST_ASSERT_EQUAL_HEX(0x1234, FunctionWhichReturnsLocalVariable());
+}
+
+void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValueAgain(void)
+{
+    /* This should be true again because setup was rerun before this test (and after we changed it to 0x1234) */
+    TEST_ASSERT_EQUAL_HEX(0x5a5a, FunctionWhichReturnsLocalVariable());
+}
+
+void test_FunctionWhichReturnsLocalVariable_ShouldReturnCurrentCounter_ButFailsBecauseThisTestIsActuallyFlawed(void)
+{
+    /* Sometimes you get the test wrong.  When that happens, you get a failure too... and a quick look should tell
+     * you what actually happened...which in this case was a failure to setup the initial condition. */
+    TEST_ASSERT_EQUAL_HEX(0x1234, FunctionWhichReturnsLocalVariable());
+}

data/vendor/cmock/vendor/unity/examples/example_4/test/TestProductionCode2.c

@@ -0,0 +1,35 @@
+
+#include "ProductionCode2.h"
+#include "unity.h"
+
+/* These should be ignored because they are commented out in various ways:
+#include "whatever.h" 
+#include "somethingelse.h"
+*/
+
+void setUp(void)
+{
+}
+
+void tearDown(void)
+{
+}
+
+void test_IgnoredTest(void);
+void test_AnotherIgnoredTest(void);
+void test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented(void);
+
+void test_IgnoredTest(void)
+{
+    TEST_IGNORE_MESSAGE("This Test Was Ignored On Purpose");
+}
+
+void test_AnotherIgnoredTest(void)
+{
+    TEST_IGNORE_MESSAGE("These Can Be Useful For Leaving Yourself Notes On What You Need To Do Yet");
+}
+
+void test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented(void)
+{
+    TEST_IGNORE(); /* Like This */
+}

data/vendor/cmock/vendor/unity/examples/example_4/test/meson.build

@@ -0,0 +1,12 @@
+###################################################################################
+#                                                                                 #
+# NAME: meson.build                                                               #
+#                                                                                 #
+# AUTHOR: Mike Karlesky, Mark VanderVoord, Greg Williams.                         #
+# WRITTEN BY: Michael Brockus.                                                    #
+#                                                                                 #
+# License: MIT                                                                    #
+#                                                                                 #
+###################################################################################
+
+subdir('test_runners')

data/vendor/cmock/vendor/unity/examples/example_4/test/test_runners/TestProductionCode2_Runner.c

@@ -0,0 +1,53 @@
+/* AUTOGENERATED FILE. DO NOT EDIT. */
+
+/*=======Test Runner Used To Run Each Test Below=====*/
+#define RUN_TEST(TestFunc, TestLineNum) \
+{ \
+  Unity.CurrentTestName = #TestFunc; \
+  Unity.CurrentTestLineNumber = TestLineNum; \
+  Unity.NumberOfTests++; \
+  if (TEST_PROTECT()) \
+  { \
+      setUp(); \
+      TestFunc(); \
+  } \
+  if (TEST_PROTECT()) \
+  { \
+    tearDown(); \
+  } \
+  UnityConcludeTest(); \
+}
+
+/*=======Automagically Detected Files To Include=====*/
+#include "unity.h"
+#include <setjmp.h>
+#include <stdio.h>
+#include "ProductionCode2.h"
+
+/*=======External Functions This Runner Calls=====*/
+extern void setUp(void);
+extern void tearDown(void);
+extern void test_IgnoredTest(void);
+extern void test_AnotherIgnoredTest(void);
+extern void test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented(void);
+
+
+/*=======Test Reset Option=====*/
+void resetTest(void);
+void resetTest(void)
+{
+  tearDown();
+  setUp();
+}
+
+
+/*=======MAIN=====*/
+int main(void)
+{
+  UnityBegin("test/TestProductionCode2.c");
+  RUN_TEST(test_IgnoredTest, 18);
+  RUN_TEST(test_AnotherIgnoredTest, 23);
+  RUN_TEST(test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented, 28);
+
+  return (UnityEnd());
+}

data/vendor/cmock/vendor/unity/examples/example_4/test/test_runners/TestProductionCode_Runner.c

@@ -0,0 +1,57 @@
+/* AUTOGENERATED FILE. DO NOT EDIT. */
+
+/*=======Test Runner Used To Run Each Test Below=====*/
+#define RUN_TEST(TestFunc, TestLineNum) \
+{ \
+  Unity.CurrentTestName = #TestFunc; \
+  Unity.CurrentTestLineNumber = TestLineNum; \
+  Unity.NumberOfTests++; \
+  if (TEST_PROTECT()) \
+  { \
+      setUp(); \
+      TestFunc(); \
+  } \
+  if (TEST_PROTECT()) \
+  { \
+    tearDown(); \
+  } \
+  UnityConcludeTest(); \
+}
+
+/*=======Automagically Detected Files To Include=====*/
+#include "unity.h"
+#include <setjmp.h>
+#include <stdio.h>
+#include "ProductionCode.h"
+
+/*=======External Functions This Runner Calls=====*/
+extern void setUp(void);
+extern void tearDown(void);
+extern void test_FindFunction_WhichIsBroken_ShouldReturnZeroIfItemIsNotInList_WhichWorksEvenInOurBrokenCode(void);
+extern void test_FindFunction_WhichIsBroken_ShouldReturnTheIndexForItemsInList_WhichWillFailBecauseOurFunctionUnderTestIsBroken(void);
+extern void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValue(void);
+extern void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValueAgain(void);
+extern void test_FunctionWhichReturnsLocalVariable_ShouldReturnCurrentCounter_ButFailsBecauseThisTestIsActuallyFlawed(void);
+
+
+/*=======Test Reset Option=====*/
+void resetTest(void);
+void resetTest(void)
+{
+  tearDown();
+  setUp();
+}
+
+
+/*=======MAIN=====*/
+int main(void)
+{
+  UnityBegin("test/TestProductionCode.c");
+  RUN_TEST(test_FindFunction_WhichIsBroken_ShouldReturnZeroIfItemIsNotInList_WhichWorksEvenInOurBrokenCode, 20);
+  RUN_TEST(test_FindFunction_WhichIsBroken_ShouldReturnTheIndexForItemsInList_WhichWillFailBecauseOurFunctionUnderTestIsBroken, 30);
+  RUN_TEST(test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValue, 41);
+  RUN_TEST(test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValueAgain, 51);
+  RUN_TEST(test_FunctionWhichReturnsLocalVariable_ShouldReturnCurrentCounter_ButFailsBecauseThisTestIsActuallyFlawed, 57);
+
+  return (UnityEnd());
+}

data/vendor/cmock/vendor/unity/examples/example_4/test/test_runners/meson.build

@@ -0,0 +1,16 @@
+###################################################################################
+#                                                                                 #
+# NAME: meson.build                                                               #
+#                                                                                 #
+# AUTHOR: Mike Karlesky, Mark VanderVoord, Greg Williams.                         #
+# WRITTEN BY: Michael Brockus.                                                    #
+#                                                                                 #
+# License: MIT                                                                    #
+#                                                                                 #
+###################################################################################
+
+cases = [['TestProductionCode_Runner.c',  join_paths('..' ,'TestProductionCode.c')], 
+        ['TestProductionCode2_Runner.c', join_paths('..' ,'TestProductionCode2.c')]]
+
+test('Running: 01-test-case', executable('01-test-case', cases[0], dependencies: [ a_dep, unity_dep ]))
+test('Running: 02-test-case', executable('02-test-case', cases[1], dependencies: [ b_dep, unity_dep ]))

data/vendor/cmock/vendor/unity/examples/unity_config.h

@@ -1,247 +1,263 @@
-/* Unity Configuration
- * As of May 11th, 2016 at ThrowTheSwitch/Unity commit 837c529
- * Update: December 29th, 2016
- * See Also: Unity/docs/UnityConfigurationGuide.pdf
- *
- * Unity is designed to run on almost anything that is targeted by a C compiler.
- * It would be awesome if this could be done with zero configuration. While
- * there are some targets that come close to this dream, it is sadly not
- * universal. It is likely that you are going to need at least a couple of the
- * configuration options described in this document.
- *
- * All of Unity's configuration options are `#defines`. Most of these are simple
- * definitions. A couple are macros with arguments. They live inside the
- * unity_internals.h header file. We don't necessarily recommend opening that
- * file unless you really need to. That file is proof that a cross-platform
- * library is challenging to build. From a more positive perspective, it is also
- * proof that a great deal of complexity can be centralized primarily to one
- * place in order to provide a more consistent and simple experience elsewhere.
- *
- * Using These Options
- * It doesn't matter if you're using a target-specific compiler and a simulator
- * or a native compiler. In either case, you've got a couple choices for
- * configuring these options:
- *
- *  1. Because these options are specified via C defines, you can pass most of
- *     these options to your compiler through command line compiler flags. Even
- *     if you're using an embedded target that forces you to use their
- *     overbearing IDE for all configuration, there will be a place somewhere in
- *     your project to configure defines for your compiler.
- *  2. You can create a custom `unity_config.h` configuration file (present in
- *     your toolchain's search paths). In this file, you will list definitions
- *     and macros specific to your target. All you must do is define
- *     `UNITY_INCLUDE_CONFIG_H` and Unity will rely on `unity_config.h` for any
- *     further definitions it may need.
- */
-
-#ifndef UNITY_CONFIG_H
-#define UNITY_CONFIG_H
-
-/* ************************* AUTOMATIC INTEGER TYPES ***************************
- * C's concept of an integer varies from target to target. The C Standard has
- * rules about the `int` matching the register size of the target
- * microprocessor. It has rules about the `int` and how its size relates to
- * other integer types. An `int` on one target might be 16 bits while on another
- * target it might be 64. There are more specific types in compilers compliant
- * with C99 or later, but that's certainly not every compiler you are likely to
- * encounter. Therefore, Unity has a number of features for helping to adjust
- * itself to match your required integer sizes. It starts off by trying to do it
- * automatically.
- **************************************************************************** */
-
-/* The first attempt to guess your types is to check `limits.h`. Some compilers
- * that don't support `stdint.h` could include `limits.h`. If you don't
- * want Unity to check this file, define this to make it skip the inclusion.
- * Unity looks at UINT_MAX & ULONG_MAX, which were available since C89.
- */
-/* #define UNITY_EXCLUDE_LIMITS_H */
-
-/* The second thing that Unity does to guess your types is check `stdint.h`.
- * This file defines `UINTPTR_MAX`, since C99, that Unity can make use of to
- * learn about your system. It's possible you don't want it to do this or it's
- * possible that your system doesn't support `stdint.h`. If that's the case,
- * you're going to want to define this. That way, Unity will know to skip the
- * inclusion of this file and you won't be left with a compiler error.
- */
-/* #define UNITY_EXCLUDE_STDINT_H */
-
-/* ********************** MANUAL INTEGER TYPE DEFINITION ***********************
- * If you've disabled all of the automatic options above, you're going to have
- * to do the configuration yourself. There are just a handful of defines that
- * you are going to specify if you don't like the defaults.
- **************************************************************************** */
-
- /* Define this to be the number of bits an `int` takes up on your system. The
- * default, if not auto-detected, is 32 bits.
- *
- * Example:
- */
-/* #define UNITY_INT_WIDTH 16 */
-
-/* Define this to be the number of bits a `long` takes up on your system. The
- * default, if not autodetected, is 32 bits. This is used to figure out what
- * kind of 64-bit support your system can handle.  Does it need to specify a
- * `long` or a `long long` to get a 64-bit value. On 16-bit systems, this option
- * is going to be ignored.
- *
- * Example:
- */
-/* #define UNITY_LONG_WIDTH 16 */
-
-/* Define this to be the number of bits a pointer takes up on your system. The
- * default, if not autodetected, is 32-bits. If you're getting ugly compiler
- * warnings about casting from pointers, this is the one to look at.
- *
- * Example:
- */
-/* #define UNITY_POINTER_WIDTH 64 */
-
-/* Unity will automatically include 64-bit support if it auto-detects it, or if
- * your `int`, `long`, or pointer widths are greater than 32-bits. Define this
- * to enable 64-bit support if none of the other options already did it for you.
- * There can be a significant size and speed impact to enabling 64-bit support
- * on small targets, so don't define it if you don't need it.
- */
-/* #define UNITY_INCLUDE_64 */
-
-
-/* *************************** FLOATING POINT TYPES ****************************
- * In the embedded world, it's not uncommon for targets to have no support for
- * floating point operations at all or to have support that is limited to only
- * single precision. We are able to guess integer sizes on the fly because
- * integers are always available in at least one size. Floating point, on the
- * other hand, is sometimes not available at all. Trying to include `float.h` on
- * these platforms would result in an error. This leaves manual configuration as
- * the only option.
- **************************************************************************** */
-
- /* By default, Unity guesses that you will want single precision floating point
-  * support, but not double precision. It's easy to change either of these using
-  * the include and exclude options here. You may include neither, just float,
-  * or both, as suits your needs.
-  */
-/* #define UNITY_EXCLUDE_FLOAT  */
-/* #define UNITY_INCLUDE_DOUBLE */
-/* #define UNITY_EXCLUDE_DOUBLE */
-
-/* For features that are enabled, the following floating point options also
- * become available.
- */
-
-/* Unity aims for as small of a footprint as possible and avoids most standard
- * library calls (some embedded platforms don't have a standard library!).
- * Because of this, its routines for printing integer values are minimalist and
- * hand-coded. To keep Unity universal, though, we eventually chose to develop
- * our own floating point print routines. Still, the display of floating point
- * values during a failure are optional. By default, Unity will print the
- * actual results of floating point assertion failures. So a failed assertion
- * will produce a message like "Expected 4.0 Was 4.25". If you would like less
- * verbose failure messages for floating point assertions, use this option to
- * give a failure message `"Values Not Within Delta"` and trim the binary size.
- */
-/* #define UNITY_EXCLUDE_FLOAT_PRINT */
-
-/* If enabled, Unity assumes you want your `FLOAT` asserts to compare standard C
- * floats. If your compiler supports a specialty floating point type, you can
- * always override this behavior by using this definition.
- *
- * Example:
- */
-/* #define UNITY_FLOAT_TYPE float16_t */
-
-/* If enabled, Unity assumes you want your `DOUBLE` asserts to compare standard
- * C doubles. If you would like to change this, you can specify something else
- * by using this option. For example, defining `UNITY_DOUBLE_TYPE` to `long
- * double` could enable gargantuan floating point types on your 64-bit processor
- * instead of the standard `double`.
- *
- * Example:
- */
-/* #define UNITY_DOUBLE_TYPE long double */
-
-/* If you look up `UNITY_ASSERT_EQUAL_FLOAT` and `UNITY_ASSERT_EQUAL_DOUBLE` as
- * documented in the Unity Assertion Guide, you will learn that they are not
- * really asserting that two values are equal but rather that two values are
- * "close enough" to equal. "Close enough" is controlled by these precision
- * configuration options. If you are working with 32-bit floats and/or 64-bit
- * doubles (the normal on most processors), you should have no need to change
- * these options. They are both set to give you approximately 1 significant bit
- * in either direction. The float precision is 0.00001 while the double is
- * 10^-12. For further details on how this works, see the appendix of the Unity
- * Assertion Guide.
- *
- * Example:
- */
-/* #define UNITY_FLOAT_PRECISION 0.001f  */
-/* #define UNITY_DOUBLE_PRECISION 0.001f */
-
-
-/* *************************** TOOLSET CUSTOMIZATION ***************************
- * In addition to the options listed above, there are a number of other options
- * which will come in handy to customize Unity's behavior for your specific
- * toolchain. It is possible that you may not need to touch any of these but
- * certain platforms, particularly those running in simulators, may need to jump
- * through extra hoops to operate properly. These macros will help in those
- * situations.
- **************************************************************************** */
-
-/* By default, Unity prints its results to `stdout` as it runs. This works
- * perfectly fine in most situations where you are using a native compiler for
- * testing. It works on some simulators as well so long as they have `stdout`
- * routed back to the command line. There are times, however, where the
- * simulator will lack support for dumping results or you will want to route
- * results elsewhere for other reasons. In these cases, you should define the
- * `UNITY_OUTPUT_CHAR` macro. This macro accepts a single character at a time
- * (as an `int`, since this is the parameter type of the standard C `putchar`
- * function most commonly used). You may replace this with whatever function
- * call you like.
- *
- * Example:
- * Say you are forced to run your test suite on an embedded processor with no
- * `stdout` option. You decide to route your test result output to a custom
- * serial `RS232_putc()` function you wrote like thus:
- */
-/* #define UNITY_OUTPUT_CHAR(a)                    RS232_putc(a) */
-/* #define UNITY_OUTPUT_CHAR_HEADER_DECLARATION    RS232_putc(int) */
-/* #define UNITY_OUTPUT_FLUSH()                    RS232_flush() */
-/* #define UNITY_OUTPUT_FLUSH_HEADER_DECLARATION   RS232_flush(void) */
-/* #define UNITY_OUTPUT_START()                    RS232_config(115200,1,8,0) */
-/* #define UNITY_OUTPUT_COMPLETE()                 RS232_close() */
-
-/* For some targets, Unity can make the otherwise required `setUp()` and
- * `tearDown()` functions optional. This is a nice convenience for test writers
- * since `setUp` and `tearDown` don't often actually _do_ anything. If you're
- * using gcc or clang, this option is automatically defined for you. Other
- * compilers can also support this behavior, if they support a C feature called
- * weak functions. A weak function is a function that is compiled into your
- * executable _unless_ a non-weak version of the same function is defined
- * elsewhere. If a non-weak version is found, the weak version is ignored as if
- * it never existed. If your compiler supports this feature, you can let Unity
- * know by defining `UNITY_SUPPORT_WEAK` as the function attributes that would
- * need to be applied to identify a function as weak. If your compiler lacks
- * support for weak functions, you will always need to define `setUp` and
- * `tearDown` functions (though they can be and often will be just empty). The
- * most common options for this feature are:
- */
-/* #define UNITY_SUPPORT_WEAK weak */
-/* #define UNITY_SUPPORT_WEAK __attribute__((weak)) */
-/* #define UNITY_NO_WEAK */
-
-/* Some compilers require a custom attribute to be assigned to pointers, like
- * `near` or `far`. In these cases, you can give Unity a safe default for these
- * by defining this option with the attribute you would like.
- *
- * Example:
- */
-/* #define UNITY_PTR_ATTRIBUTE __attribute__((far)) */
-/* #define UNITY_PTR_ATTRIBUTE near */
-
-/* Print execution time of each test when executed in verbose mode
- *
- * Example:
- *
- * TEST - PASS (10 ms)
- */
-/* #define UNITY_INCLUDE_EXEC_TIME */
-
-#endif /* UNITY_CONFIG_H */
+/* Unity Configuration
+ * As of May 11th, 2016 at ThrowTheSwitch/Unity commit 837c529
+ * Update: December 29th, 2016
+ * See Also: Unity/docs/UnityConfigurationGuide.pdf
+ *
+ * Unity is designed to run on almost anything that is targeted by a C compiler.
+ * It would be awesome if this could be done with zero configuration. While
+ * there are some targets that come close to this dream, it is sadly not
+ * universal. It is likely that you are going to need at least a couple of the
+ * configuration options described in this document.
+ *
+ * All of Unity's configuration options are `#defines`. Most of these are simple
+ * definitions. A couple are macros with arguments. They live inside the
+ * unity_internals.h header file. We don't necessarily recommend opening that
+ * file unless you really need to. That file is proof that a cross-platform
+ * library is challenging to build. From a more positive perspective, it is also
+ * proof that a great deal of complexity can be centralized primarily to one
+ * place in order to provide a more consistent and simple experience elsewhere.
+ *
+ * Using These Options
+ * It doesn't matter if you're using a target-specific compiler and a simulator
+ * or a native compiler. In either case, you've got a couple choices for
+ * configuring these options:
+ *
+ *  1. Because these options are specified via C defines, you can pass most of
+ *     these options to your compiler through command line compiler flags. Even
+ *     if you're using an embedded target that forces you to use their
+ *     overbearing IDE for all configuration, there will be a place somewhere in
+ *     your project to configure defines for your compiler.
+ *  2. You can create a custom `unity_config.h` configuration file (present in
+ *     your toolchain's search paths). In this file, you will list definitions
+ *     and macros specific to your target. All you must do is define
+ *     `UNITY_INCLUDE_CONFIG_H` and Unity will rely on `unity_config.h` for any
+ *     further definitions it may need.
+ */
+
+#ifndef UNITY_CONFIG_H
+#define UNITY_CONFIG_H
+
+/* ************************* AUTOMATIC INTEGER TYPES ***************************
+ * C's concept of an integer varies from target to target. The C Standard has
+ * rules about the `int` matching the register size of the target
+ * microprocessor. It has rules about the `int` and how its size relates to
+ * other integer types. An `int` on one target might be 16 bits while on another
+ * target it might be 64. There are more specific types in compilers compliant
+ * with C99 or later, but that's certainly not every compiler you are likely to
+ * encounter. Therefore, Unity has a number of features for helping to adjust
+ * itself to match your required integer sizes. It starts off by trying to do it
+ * automatically.
+ **************************************************************************** */
+
+/* The first attempt to guess your types is to check `limits.h`. Some compilers
+ * that don't support `stdint.h` could include `limits.h`. If you don't
+ * want Unity to check this file, define this to make it skip the inclusion.
+ * Unity looks at UINT_MAX & ULONG_MAX, which were available since C89.
+ */
+/* #define UNITY_EXCLUDE_LIMITS_H */
+
+/* The second thing that Unity does to guess your types is check `stdint.h`.
+ * This file defines `UINTPTR_MAX`, since C99, that Unity can make use of to
+ * learn about your system. It's possible you don't want it to do this or it's
+ * possible that your system doesn't support `stdint.h`. If that's the case,
+ * you're going to want to define this. That way, Unity will know to skip the
+ * inclusion of this file and you won't be left with a compiler error.
+ */
+/* #define UNITY_EXCLUDE_STDINT_H */
+
+/* ********************** MANUAL INTEGER TYPE DEFINITION ***********************
+ * If you've disabled all of the automatic options above, you're going to have
+ * to do the configuration yourself. There are just a handful of defines that
+ * you are going to specify if you don't like the defaults.
+ **************************************************************************** */
+
+ /* Define this to be the number of bits an `int` takes up on your system. The
+ * default, if not auto-detected, is 32 bits.
+ *
+ * Example:
+ */
+/* #define UNITY_INT_WIDTH 16 */
+
+/* Define this to be the number of bits a `long` takes up on your system. The
+ * default, if not autodetected, is 32 bits. This is used to figure out what
+ * kind of 64-bit support your system can handle.  Does it need to specify a
+ * `long` or a `long long` to get a 64-bit value. On 16-bit systems, this option
+ * is going to be ignored.
+ *
+ * Example:
+ */
+/* #define UNITY_LONG_WIDTH 16 */
+
+/* Define this to be the number of bits a pointer takes up on your system. The
+ * default, if not autodetected, is 32-bits. If you're getting ugly compiler
+ * warnings about casting from pointers, this is the one to look at.
+ *
+ * Example:
+ */
+/* #define UNITY_POINTER_WIDTH 64 */
+
+/* Unity will automatically include 64-bit support if it auto-detects it, or if
+ * your `int`, `long`, or pointer widths are greater than 32-bits. Define this
+ * to enable 64-bit support if none of the other options already did it for you.
+ * There can be a significant size and speed impact to enabling 64-bit support
+ * on small targets, so don't define it if you don't need it.
+ */
+/* #define UNITY_INCLUDE_64 */
+
+
+/* *************************** FLOATING POINT TYPES ****************************
+ * In the embedded world, it's not uncommon for targets to have no support for
+ * floating point operations at all or to have support that is limited to only
+ * single precision. We are able to guess integer sizes on the fly because
+ * integers are always available in at least one size. Floating point, on the
+ * other hand, is sometimes not available at all. Trying to include `float.h` on
+ * these platforms would result in an error. This leaves manual configuration as
+ * the only option.
+ **************************************************************************** */
+
+ /* By default, Unity guesses that you will want single precision floating point
+  * support, but not double precision. It's easy to change either of these using
+  * the include and exclude options here. You may include neither, just float,
+  * or both, as suits your needs.
+  */
+/* #define UNITY_EXCLUDE_FLOAT  */
+/* #define UNITY_INCLUDE_DOUBLE */
+/* #define UNITY_EXCLUDE_DOUBLE */
+
+/* For features that are enabled, the following floating point options also
+ * become available.
+ */
+
+/* Unity aims for as small of a footprint as possible and avoids most standard
+ * library calls (some embedded platforms don't have a standard library!).
+ * Because of this, its routines for printing integer values are minimalist and
+ * hand-coded. To keep Unity universal, though, we eventually chose to develop
+ * our own floating point print routines. Still, the display of floating point
+ * values during a failure are optional. By default, Unity will print the
+ * actual results of floating point assertion failures. So a failed assertion
+ * will produce a message like "Expected 4.0 Was 4.25". If you would like less
+ * verbose failure messages for floating point assertions, use this option to
+ * give a failure message `"Values Not Within Delta"` and trim the binary size.
+ */
+/* #define UNITY_EXCLUDE_FLOAT_PRINT */
+
+/* If enabled, Unity assumes you want your `FLOAT` asserts to compare standard C
+ * floats. If your compiler supports a specialty floating point type, you can
+ * always override this behavior by using this definition.
+ *
+ * Example:
+ */
+/* #define UNITY_FLOAT_TYPE float16_t */
+
+/* If enabled, Unity assumes you want your `DOUBLE` asserts to compare standard
+ * C doubles. If you would like to change this, you can specify something else
+ * by using this option. For example, defining `UNITY_DOUBLE_TYPE` to `long
+ * double` could enable gargantuan floating point types on your 64-bit processor
+ * instead of the standard `double`.
+ *
+ * Example:
+ */
+/* #define UNITY_DOUBLE_TYPE long double */
+
+/* If you look up `UNITY_ASSERT_EQUAL_FLOAT` and `UNITY_ASSERT_EQUAL_DOUBLE` as
+ * documented in the Unity Assertion Guide, you will learn that they are not
+ * really asserting that two values are equal but rather that two values are
+ * "close enough" to equal. "Close enough" is controlled by these precision
+ * configuration options. If you are working with 32-bit floats and/or 64-bit
+ * doubles (the normal on most processors), you should have no need to change
+ * these options. They are both set to give you approximately 1 significant bit
+ * in either direction. The float precision is 0.00001 while the double is
+ * 10^-12. For further details on how this works, see the appendix of the Unity
+ * Assertion Guide.
+ *
+ * Example:
+ */
+/* #define UNITY_FLOAT_PRECISION 0.001f  */
+/* #define UNITY_DOUBLE_PRECISION 0.001f */
+
+
+/* *************************** MISCELLANEOUS ***********************************
+ * Miscellaneous configuration options for Unity
+ **************************************************************************** */
+
+/* Unity uses the stddef.h header included in the C standard library for the
+ * "NULL" macro. Define this in order to disable the include of stddef.h. If you
+ * do this, you have to make sure to provide your own "NULL" definition.
+ */
+/* #define UNITY_EXCLUDE_STDDEF_H */
+
+/* Define this to enable the unity formatted print function:
+ * "UnityPrintFormatted"
+ */
+/* #define UNITY_INCLUDE_PRINT_FORMATTED */
+
+
+/* *************************** TOOLSET CUSTOMIZATION ***************************
+ * In addition to the options listed above, there are a number of other options
+ * which will come in handy to customize Unity's behavior for your specific
+ * toolchain. It is possible that you may not need to touch any of these but
+ * certain platforms, particularly those running in simulators, may need to jump
+ * through extra hoops to operate properly. These macros will help in those
+ * situations.
+ **************************************************************************** */
+
+/* By default, Unity prints its results to `stdout` as it runs. This works
+ * perfectly fine in most situations where you are using a native compiler for
+ * testing. It works on some simulators as well so long as they have `stdout`
+ * routed back to the command line. There are times, however, where the
+ * simulator will lack support for dumping results or you will want to route
+ * results elsewhere for other reasons. In these cases, you should define the
+ * `UNITY_OUTPUT_CHAR` macro. This macro accepts a single character at a time
+ * (as an `int`, since this is the parameter type of the standard C `putchar`
+ * function most commonly used). You may replace this with whatever function
+ * call you like.
+ *
+ * Example:
+ * Say you are forced to run your test suite on an embedded processor with no
+ * `stdout` option. You decide to route your test result output to a custom
+ * serial `RS232_putc()` function you wrote like thus:
+ */
+/* #define UNITY_OUTPUT_CHAR(a)                    RS232_putc(a) */
+/* #define UNITY_OUTPUT_CHAR_HEADER_DECLARATION    RS232_putc(int) */
+/* #define UNITY_OUTPUT_FLUSH()                    RS232_flush() */
+/* #define UNITY_OUTPUT_FLUSH_HEADER_DECLARATION   RS232_flush(void) */
+/* #define UNITY_OUTPUT_START()                    RS232_config(115200,1,8,0) */
+/* #define UNITY_OUTPUT_COMPLETE()                 RS232_close() */
+
+/* For some targets, Unity can make the otherwise required `setUp()` and
+ * `tearDown()` functions optional. This is a nice convenience for test writers
+ * since `setUp` and `tearDown` don't often actually _do_ anything. If you're
+ * using gcc or clang, this option is automatically defined for you. Other
+ * compilers can also support this behavior, if they support a C feature called
+ * weak functions. A weak function is a function that is compiled into your
+ * executable _unless_ a non-weak version of the same function is defined
+ * elsewhere. If a non-weak version is found, the weak version is ignored as if
+ * it never existed. If your compiler supports this feature, you can let Unity
+ * know by defining `UNITY_SUPPORT_WEAK` as the function attributes that would
+ * need to be applied to identify a function as weak. If your compiler lacks
+ * support for weak functions, you will always need to define `setUp` and
+ * `tearDown` functions (though they can be and often will be just empty). The
+ * most common options for this feature are:
+ */
+/* #define UNITY_SUPPORT_WEAK weak */
+/* #define UNITY_SUPPORT_WEAK __attribute__((weak)) */
+/* #define UNITY_NO_WEAK */
+
+/* Some compilers require a custom attribute to be assigned to pointers, like
+ * `near` or `far`. In these cases, you can give Unity a safe default for these
+ * by defining this option with the attribute you would like.
+ *
+ * Example:
+ */
+/* #define UNITY_PTR_ATTRIBUTE __attribute__((far)) */
+/* #define UNITY_PTR_ATTRIBUTE near */
+
+/* Print execution time of each test when executed in verbose mode
+ *
+ * Example:
+ *
+ * TEST - PASS (10 ms)
+ */
+/* #define UNITY_INCLUDE_EXEC_TIME */
+
+#endif /* UNITY_CONFIG_H */