ceedling 0.28.3 → 0.29.0

data/examples/blinky/test/support/stub_sfr_defs.h

@@ -1,269 +1,269 @@
-/* Copyright (c) 2002, Marek Michalkiewicz <marekm@amelek.gda.pl>
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-   * Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   * Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   * Neither the name of the copyright holders nor the names of
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.  */
-
-/* avr/sfr_defs.h - macros for accessing AVR special function registers */
-
-/* $Id: sfr_defs.h,v 1.18.2.1 2008/04/28 22:05:42 arcanum Exp $ */
-
-#ifndef _AVR_SFR_DEFS_H_
-#define _AVR_SFR_DEFS_H_ 1
-
-/** \defgroup avr_sfr_notes Additional notes from <avr/sfr_defs.h>
-    \ingroup avr_sfr
-
-   The \c <avr/sfr_defs.h> file is included by all of the \c <avr/ioXXXX.h>
-   files, which use macros defined here to make the special function register
-   definitions look like C variables or simple constants, depending on the
-   <tt>_SFR_ASM_COMPAT</tt> define.  Some examples from \c <avr/iocanxx.h> to
-   show how to define such macros:
-
-\code
-#define PORTA   _SFR_IO8(0x02)
-#define EEAR    _SFR_IO16(0x21)
-#define UDR0    _SFR_MEM8(0xC6)
-#define TCNT3   _SFR_MEM16(0x94)
-#define CANIDT  _SFR_MEM32(0xF0)
-\endcode
-
-   If \c _SFR_ASM_COMPAT is not defined, C programs can use names like
-   <tt>PORTA</tt> directly in C expressions (also on the left side of
-   assignment operators) and GCC will do the right thing (use short I/O
-   instructions if possible).  The \c __SFR_OFFSET definition is not used in
-   any way in this case.
-
-   Define \c _SFR_ASM_COMPAT as 1 to make these names work as simple constants
-   (addresses of the I/O registers).  This is necessary when included in
-   preprocessed assembler (*.S) source files, so it is done automatically if
-   \c __ASSEMBLER__ is defined.  By default, all addresses are defined as if
-   they were memory addresses (used in \c lds/sts instructions).  To use these
-   addresses in \c in/out instructions, you must subtract 0x20 from them.
-
-   For more backwards compatibility, insert the following at the start of your
-   old assembler source file:
-
-\code
-#define __SFR_OFFSET 0
-\endcode
-
-   This automatically subtracts 0x20 from I/O space addresses, but it's a
-   hack, so it is recommended to change your source: wrap such addresses in
-   macros defined here, as shown below.  After this is done, the
-   <tt>__SFR_OFFSET</tt> definition is no longer necessary and can be removed.
-
-   Real example - this code could be used in a boot loader that is portable
-   between devices with \c SPMCR at different addresses.
-
-\verbatim
-<avr/iom163.h>: #define SPMCR _SFR_IO8(0x37)
-<avr/iom128.h>: #define SPMCR _SFR_MEM8(0x68)
-\endverbatim
-
-\code
-#if _SFR_IO_REG_P(SPMCR)
-  out _SFR_IO_ADDR(SPMCR), r24
-#else
-  sts _SFR_MEM_ADDR(SPMCR), r24
-#endif
-\endcode
-
-   You can use the \c in/out/cbi/sbi/sbic/sbis instructions, without the
-   <tt>_SFR_IO_REG_P</tt> test, if you know that the register is in the I/O
-   space (as with \c SREG, for example).  If it isn't, the assembler will
-   complain (I/O address out of range 0...0x3f), so this should be fairly
-   safe.
-
-   If you do not define \c __SFR_OFFSET (so it will be 0x20 by default), all
-   special register addresses are defined as memory addresses (so \c SREG is
-   0x5f), and (if code size and speed are not important, and you don't like
-   the ugly \#if above) you can always use lds/sts to access them.  But, this
-   will not work if <tt>__SFR_OFFSET</tt> != 0x20, so use a different macro
-   (defined only if <tt>__SFR_OFFSET</tt> == 0x20) for safety:
-
-\code
-  sts _SFR_ADDR(SPMCR), r24
-\endcode
-
-   In C programs, all 3 combinations of \c _SFR_ASM_COMPAT and
-   <tt>__SFR_OFFSET</tt> are supported - the \c _SFR_ADDR(SPMCR) macro can be
-   used to get the address of the \c SPMCR register (0x57 or 0x68 depending on
-   device). */
-
-#ifdef __ASSEMBLER__
-#define _SFR_ASM_COMPAT 1
-#elif !defined(_SFR_ASM_COMPAT)
-#define _SFR_ASM_COMPAT 0
-#endif
-
-#ifndef __ASSEMBLER__
-/* These only work in C programs.  */
-#include <inttypes.h>
-
-#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
-#define _MMIO_WORD(mem_addr) (*(volatile uint16_t *)(mem_addr))
-#define _MMIO_DWORD(mem_addr) (*(volatile uint32_t *)(mem_addr))
-#endif
-
-#if _SFR_ASM_COMPAT
-
-#ifndef __SFR_OFFSET
-/* Define as 0 before including this file for compatibility with old asm
-   sources that don't subtract __SFR_OFFSET from symbolic I/O addresses.  */
-#  if __AVR_ARCH__ >= 100
-#    define __SFR_OFFSET 0x00
-#  else
-#    define __SFR_OFFSET 0x20
-#  endif
-#endif
-
-#if (__SFR_OFFSET != 0) && (__SFR_OFFSET != 0x20)
-#error "__SFR_OFFSET must be 0 or 0x20"
-#endif
-
-#define _SFR_MEM8(mem_addr) (mem_addr)
-#define _SFR_MEM16(mem_addr) (mem_addr)
-#define _SFR_MEM32(mem_addr) (mem_addr)
-#define _SFR_IO8(io_addr) ((io_addr) + __SFR_OFFSET)
-#define _SFR_IO16(io_addr) ((io_addr) + __SFR_OFFSET)
-
-#define _SFR_IO_ADDR(sfr) ((sfr) - __SFR_OFFSET)
-#define _SFR_MEM_ADDR(sfr) (sfr)
-#define _SFR_IO_REG_P(sfr) ((sfr) < 0x40 + __SFR_OFFSET)
-
-#if (__SFR_OFFSET == 0x20)
-/* No need to use ?: operator, so works in assembler too.  */
-#define _SFR_ADDR(sfr) _SFR_MEM_ADDR(sfr)
-#elif !defined(__ASSEMBLER__)
-#define _SFR_ADDR(sfr) (_SFR_IO_REG_P(sfr) ? (_SFR_IO_ADDR(sfr) + 0x20) : _SFR_MEM_ADDR(sfr))
-#endif
-
-#else  /* !_SFR_ASM_COMPAT */
-
-#ifndef __SFR_OFFSET
-#  if __AVR_ARCH__ >= 100
-#    define __SFR_OFFSET 0x00
-#  else
-#    define __SFR_OFFSET 0x20
-#  endif
-#endif
-
-#define _SFR_MEM8(mem_addr) _MMIO_BYTE(mem_addr)
-#define _SFR_MEM16(mem_addr) _MMIO_WORD(mem_addr)
-#define _SFR_MEM32(mem_addr) _MMIO_DWORD(mem_addr)
-#define _SFR_IO8(io_addr) _MMIO_BYTE((io_addr) + __SFR_OFFSET)
-#define _SFR_IO16(io_addr) _MMIO_WORD((io_addr) + __SFR_OFFSET)
-
-#define _SFR_MEM_ADDR(sfr) ((uint16_t) &(sfr))
-#define _SFR_IO_ADDR(sfr) (_SFR_MEM_ADDR(sfr) - __SFR_OFFSET)
-#define _SFR_IO_REG_P(sfr) (_SFR_MEM_ADDR(sfr) < 0x40 + __SFR_OFFSET)
-
-#define _SFR_ADDR(sfr) _SFR_MEM_ADDR(sfr)
-
-#endif /* !_SFR_ASM_COMPAT */
-
-#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr))
-#define _SFR_WORD(sfr) _MMIO_WORD(_SFR_ADDR(sfr))
-#define _SFR_DWORD(sfr) _MMIO_DWORD(_SFR_ADDR(sfr))
-
-/** \name Bit manipulation */
-
-/*@{*/
-/** \def _BV
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Converts a bit number into a byte value.
-
-    \note The bit shift is performed by the compiler which then inserts the
-    result into the code. Thus, there is no run-time overhead when using
-    _BV(). */
-    
-#define _BV(bit) (1 << (bit))
-
-/*@}*/
-
-#ifndef _VECTOR
-#define _VECTOR(N) __vector_ ## N
-#endif
-
-#ifndef __ASSEMBLER__
-
-
-/** \name IO register bit manipulation */
-
-/*@{*/
-
-
-
-/** \def bit_is_set
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Test whether bit \c bit in IO register \c sfr is set. 
-    This will return a 0 if the bit is clear, and non-zero
-    if the bit is set. */
-
-#define bit_is_set(sfr, bit) (_SFR_BYTE(sfr) & _BV(bit))
-
-/** \def bit_is_clear
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Test whether bit \c bit in IO register \c sfr is clear. 
-    This will return non-zero if the bit is clear, and a 0
-    if the bit is set. */
-
-#define bit_is_clear(sfr, bit) (!(_SFR_BYTE(sfr) & _BV(bit)))
-
-/** \def loop_until_bit_is_set
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Wait until bit \c bit in IO register \c sfr is set. */
-
-#define loop_until_bit_is_set(sfr, bit) do { } while (bit_is_clear(sfr, bit))
-
-/** \def loop_until_bit_is_clear
-    \ingroup avr_sfr
-
-    \code #include <avr/io.h>\endcode
-
-    Wait until bit \c bit in IO register \c sfr is clear. */
-
-#define loop_until_bit_is_clear(sfr, bit) do { } while (bit_is_set(sfr, bit))
-
-/*@}*/
-
-#endif /* !__ASSEMBLER__ */
-
-#endif  /* _SFR_DEFS_H_ */
+/* Copyright (c) 2002, Marek Michalkiewicz <marekm@amelek.gda.pl>
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* avr/sfr_defs.h - macros for accessing AVR special function registers */
+
+/* $Id: sfr_defs.h,v 1.18.2.1 2008/04/28 22:05:42 arcanum Exp $ */
+
+#ifndef _AVR_SFR_DEFS_H_
+#define _AVR_SFR_DEFS_H_ 1
+
+/** \defgroup avr_sfr_notes Additional notes from <avr/sfr_defs.h>
+    \ingroup avr_sfr
+
+   The \c <avr/sfr_defs.h> file is included by all of the \c <avr/ioXXXX.h>
+   files, which use macros defined here to make the special function register
+   definitions look like C variables or simple constants, depending on the
+   <tt>_SFR_ASM_COMPAT</tt> define.  Some examples from \c <avr/iocanxx.h> to
+   show how to define such macros:
+
+\code
+#define PORTA   _SFR_IO8(0x02)
+#define EEAR    _SFR_IO16(0x21)
+#define UDR0    _SFR_MEM8(0xC6)
+#define TCNT3   _SFR_MEM16(0x94)
+#define CANIDT  _SFR_MEM32(0xF0)
+\endcode
+
+   If \c _SFR_ASM_COMPAT is not defined, C programs can use names like
+   <tt>PORTA</tt> directly in C expressions (also on the left side of
+   assignment operators) and GCC will do the right thing (use short I/O
+   instructions if possible).  The \c __SFR_OFFSET definition is not used in
+   any way in this case.
+
+   Define \c _SFR_ASM_COMPAT as 1 to make these names work as simple constants
+   (addresses of the I/O registers).  This is necessary when included in
+   preprocessed assembler (*.S) source files, so it is done automatically if
+   \c __ASSEMBLER__ is defined.  By default, all addresses are defined as if
+   they were memory addresses (used in \c lds/sts instructions).  To use these
+   addresses in \c in/out instructions, you must subtract 0x20 from them.
+
+   For more backwards compatibility, insert the following at the start of your
+   old assembler source file:
+
+\code
+#define __SFR_OFFSET 0
+\endcode
+
+   This automatically subtracts 0x20 from I/O space addresses, but it's a
+   hack, so it is recommended to change your source: wrap such addresses in
+   macros defined here, as shown below.  After this is done, the
+   <tt>__SFR_OFFSET</tt> definition is no longer necessary and can be removed.
+
+   Real example - this code could be used in a boot loader that is portable
+   between devices with \c SPMCR at different addresses.
+
+\verbatim
+<avr/iom163.h>: #define SPMCR _SFR_IO8(0x37)
+<avr/iom128.h>: #define SPMCR _SFR_MEM8(0x68)
+\endverbatim
+
+\code
+#if _SFR_IO_REG_P(SPMCR)
+  out _SFR_IO_ADDR(SPMCR), r24
+#else
+  sts _SFR_MEM_ADDR(SPMCR), r24
+#endif
+\endcode
+
+   You can use the \c in/out/cbi/sbi/sbic/sbis instructions, without the
+   <tt>_SFR_IO_REG_P</tt> test, if you know that the register is in the I/O
+   space (as with \c SREG, for example).  If it isn't, the assembler will
+   complain (I/O address out of range 0...0x3f), so this should be fairly
+   safe.
+
+   If you do not define \c __SFR_OFFSET (so it will be 0x20 by default), all
+   special register addresses are defined as memory addresses (so \c SREG is
+   0x5f), and (if code size and speed are not important, and you don't like
+   the ugly \#if above) you can always use lds/sts to access them.  But, this
+   will not work if <tt>__SFR_OFFSET</tt> != 0x20, so use a different macro
+   (defined only if <tt>__SFR_OFFSET</tt> == 0x20) for safety:
+
+\code
+  sts _SFR_ADDR(SPMCR), r24
+\endcode
+
+   In C programs, all 3 combinations of \c _SFR_ASM_COMPAT and
+   <tt>__SFR_OFFSET</tt> are supported - the \c _SFR_ADDR(SPMCR) macro can be
+   used to get the address of the \c SPMCR register (0x57 or 0x68 depending on
+   device). */
+
+#ifdef __ASSEMBLER__
+#define _SFR_ASM_COMPAT 1
+#elif !defined(_SFR_ASM_COMPAT)
+#define _SFR_ASM_COMPAT 0
+#endif
+
+#ifndef __ASSEMBLER__
+/* These only work in C programs.  */
+#include <inttypes.h>
+
+#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
+#define _MMIO_WORD(mem_addr) (*(volatile uint16_t *)(mem_addr))
+#define _MMIO_DWORD(mem_addr) (*(volatile uint32_t *)(mem_addr))
+#endif
+
+#if _SFR_ASM_COMPAT
+
+#ifndef __SFR_OFFSET
+/* Define as 0 before including this file for compatibility with old asm
+   sources that don't subtract __SFR_OFFSET from symbolic I/O addresses.  */
+#  if __AVR_ARCH__ >= 100
+#    define __SFR_OFFSET 0x00
+#  else
+#    define __SFR_OFFSET 0x20
+#  endif
+#endif
+
+#if (__SFR_OFFSET != 0) && (__SFR_OFFSET != 0x20)
+#error "__SFR_OFFSET must be 0 or 0x20"
+#endif
+
+#define _SFR_MEM8(mem_addr) (mem_addr)
+#define _SFR_MEM16(mem_addr) (mem_addr)
+#define _SFR_MEM32(mem_addr) (mem_addr)
+#define _SFR_IO8(io_addr) ((io_addr) + __SFR_OFFSET)
+#define _SFR_IO16(io_addr) ((io_addr) + __SFR_OFFSET)
+
+#define _SFR_IO_ADDR(sfr) ((sfr) - __SFR_OFFSET)
+#define _SFR_MEM_ADDR(sfr) (sfr)
+#define _SFR_IO_REG_P(sfr) ((sfr) < 0x40 + __SFR_OFFSET)
+
+#if (__SFR_OFFSET == 0x20)
+/* No need to use ?: operator, so works in assembler too.  */
+#define _SFR_ADDR(sfr) _SFR_MEM_ADDR(sfr)
+#elif !defined(__ASSEMBLER__)
+#define _SFR_ADDR(sfr) (_SFR_IO_REG_P(sfr) ? (_SFR_IO_ADDR(sfr) + 0x20) : _SFR_MEM_ADDR(sfr))
+#endif
+
+#else  /* !_SFR_ASM_COMPAT */
+
+#ifndef __SFR_OFFSET
+#  if __AVR_ARCH__ >= 100
+#    define __SFR_OFFSET 0x00
+#  else
+#    define __SFR_OFFSET 0x20
+#  endif
+#endif
+
+#define _SFR_MEM8(mem_addr) _MMIO_BYTE(mem_addr)
+#define _SFR_MEM16(mem_addr) _MMIO_WORD(mem_addr)
+#define _SFR_MEM32(mem_addr) _MMIO_DWORD(mem_addr)
+#define _SFR_IO8(io_addr) _MMIO_BYTE((io_addr) + __SFR_OFFSET)
+#define _SFR_IO16(io_addr) _MMIO_WORD((io_addr) + __SFR_OFFSET)
+
+#define _SFR_MEM_ADDR(sfr) ((uint16_t) &(sfr))
+#define _SFR_IO_ADDR(sfr) (_SFR_MEM_ADDR(sfr) - __SFR_OFFSET)
+#define _SFR_IO_REG_P(sfr) (_SFR_MEM_ADDR(sfr) < 0x40 + __SFR_OFFSET)
+
+#define _SFR_ADDR(sfr) _SFR_MEM_ADDR(sfr)
+
+#endif /* !_SFR_ASM_COMPAT */
+
+#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr))
+#define _SFR_WORD(sfr) _MMIO_WORD(_SFR_ADDR(sfr))
+#define _SFR_DWORD(sfr) _MMIO_DWORD(_SFR_ADDR(sfr))
+
+/** \name Bit manipulation */
+
+/*@{*/
+/** \def _BV
+    \ingroup avr_sfr
+
+    \code #include <avr/io.h>\endcode
+
+    Converts a bit number into a byte value.
+
+    \note The bit shift is performed by the compiler which then inserts the
+    result into the code. Thus, there is no run-time overhead when using
+    _BV(). */
+    
+#define _BV(bit) (1 << (bit))
+
+/*@}*/
+
+#ifndef _VECTOR
+#define _VECTOR(N) __vector_ ## N
+#endif
+
+#ifndef __ASSEMBLER__
+
+
+/** \name IO register bit manipulation */
+
+/*@{*/
+
+
+
+/** \def bit_is_set
+    \ingroup avr_sfr
+
+    \code #include <avr/io.h>\endcode
+
+    Test whether bit \c bit in IO register \c sfr is set. 
+    This will return a 0 if the bit is clear, and non-zero
+    if the bit is set. */
+
+#define bit_is_set(sfr, bit) (_SFR_BYTE(sfr) & _BV(bit))
+
+/** \def bit_is_clear
+    \ingroup avr_sfr
+
+    \code #include <avr/io.h>\endcode
+
+    Test whether bit \c bit in IO register \c sfr is clear. 
+    This will return non-zero if the bit is clear, and a 0
+    if the bit is set. */
+
+#define bit_is_clear(sfr, bit) (!(_SFR_BYTE(sfr) & _BV(bit)))
+
+/** \def loop_until_bit_is_set
+    \ingroup avr_sfr
+
+    \code #include <avr/io.h>\endcode
+
+    Wait until bit \c bit in IO register \c sfr is set. */
+
+#define loop_until_bit_is_set(sfr, bit) do { } while (bit_is_clear(sfr, bit))
+
+/** \def loop_until_bit_is_clear
+    \ingroup avr_sfr
+
+    \code #include <avr/io.h>\endcode
+
+    Wait until bit \c bit in IO register \c sfr is clear. */
+
+#define loop_until_bit_is_clear(sfr, bit) do { } while (bit_is_set(sfr, bit))
+
+/*@}*/
+
+#endif /* !__ASSEMBLER__ */
+
+#endif  /* _SFR_DEFS_H_ */