ceedling 0.28.2 → 0.28.3

data/vendor/cmock/vendor/unity/auto/test_file_filter.rb

@@ -0,0 +1,25 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ==========================================
+
+require'yaml'
+
+module RakefileHelpers
+  class TestFileFilter
+    def initialize(all_files = false)
+      @all_files = all_files
+
+      return false unless @all_files
+      return false unless File.exist?('test_file_filter.yml')
+
+      filters = YAML.load_file('test_file_filter.yml')
+      @all_files = filters[:all_files]
+      @only_files = filters[:only_files]
+      @exclude_files = filters[:exclude_files]
+    end
+
+    attr_accessor :all_files, :only_files, :exclude_files
+  end
+end

data/vendor/cmock/vendor/unity/auto/type_sanitizer.rb

@@ -0,0 +1,6 @@
+module TypeSanitizer
+  def self.sanitize_c_identifier(unsanitized)
+    # convert filename to valid C identifier by replacing invalid chars with '_'
+    unsanitized.gsub(/[-\/\\\.\,\s]/, '_')
+  end
+end

data/vendor/cmock/vendor/unity/auto/unity_test_summary.py

@@ -0,0 +1,139 @@
+#! python3
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2015 Alexander Mueller / XelaRellum@web.de
+#   [Released under MIT License. Please refer to license.txt for details]
+#   Based on the ruby script by  Mike Karlesky, Mark VanderVoord, Greg Williams
+# ==========================================
+import sys
+import os
+import re
+from glob import glob
+
+class UnityTestSummary:
+    def __init__(self):
+        self.report = ''
+        self.total_tests = 0
+        self.failures = 0
+        self.ignored = 0
+
+    def run(self):
+        # Clean up result file names
+        results = []
+        for target in self.targets:
+            results.append(target.replace('\\', '/'))
+
+        # Dig through each result file, looking for details on pass/fail:
+        failure_output = []
+        ignore_output = []
+
+        for result_file in results:
+            lines = list(map(lambda line: line.rstrip(), open(result_file, "r").read().split('\n')))
+            if len(lines) == 0:
+                raise Exception("Empty test result file: %s" % result_file)
+
+            details = self.get_details(result_file, lines)
+            failures = details['failures']
+            ignores = details['ignores']
+            if len(failures) > 0: failure_output.append('\n'.join(failures))
+            if len(ignores) > 0: ignore_output.append('n'.join(ignores))
+            tests,failures,ignored = self.parse_test_summary('\n'.join(lines))
+            self.total_tests += tests
+            self.failures += failures
+            self.ignored += ignored
+
+        if self.ignored > 0:
+            self.report += "\n"
+            self.report += "--------------------------\n"
+            self.report += "UNITY IGNORED TEST SUMMARY\n"
+            self.report += "--------------------------\n"
+            self.report += "\n".join(ignore_output)
+
+        if self.failures > 0:
+            self.report += "\n"
+            self.report += "--------------------------\n"
+            self.report += "UNITY FAILED TEST SUMMARY\n"
+            self.report += "--------------------------\n"
+            self.report += '\n'.join(failure_output)
+
+        self.report += "\n"
+        self.report += "--------------------------\n"
+        self.report += "OVERALL UNITY TEST SUMMARY\n"
+        self.report += "--------------------------\n"
+        self.report += "{total_tests} TOTAL TESTS {failures} TOTAL FAILURES {ignored} IGNORED\n".format(total_tests = self.total_tests, failures=self.failures, ignored=self.ignored)
+        self.report += "\n"
+
+        return self.report
+
+    def set_targets(self, target_array):
+            self.targets = target_array
+
+    def set_root_path(self, path):
+        self.root = path
+
+    def usage(self, err_msg=None):
+        print("\nERROR: ")
+        if err_msg:
+            print(err_msg)
+        print("\nUsage: unity_test_summary.py result_file_directory/ root_path/")
+        print("     result_file_directory - The location of your results files.")
+        print("                             Defaults to current directory if not specified.")
+        print("                             Should end in / if specified.")
+        print("     root_path - Helpful for producing more verbose output if using relative paths.")
+        sys.exit(1)
+
+    def get_details(self, result_file, lines):
+        results = { 'failures': [], 'ignores': [], 'successes': [] }
+        for line in lines:
+            parts = line.split(':')
+            if len(parts) == 5:
+                src_file,src_line,test_name,status,msg = parts
+            elif len(parts) == 4:
+                src_file,src_line,test_name,status = parts
+                msg = ''
+            else:
+                continue
+            if len(self.root) > 0:
+                line_out = "%s%s" % (self.root, line)
+            else:
+                line_out = line
+            if status == 'IGNORE':
+                results['ignores'].append(line_out)
+            elif status == 'FAIL':
+                results['failures'].append(line_out)
+            elif status == 'PASS':
+                results['successes'].append(line_out)
+        return results
+
+    def parse_test_summary(self, summary):
+        m = re.search(r"([0-9]+) Tests ([0-9]+) Failures ([0-9]+) Ignored", summary)
+        if not m:
+            raise Exception("Couldn't parse test results: %s" % summary)
+
+        return int(m.group(1)), int(m.group(2)), int(m.group(3))
+
+
+if __name__ == '__main__':
+  uts = UnityTestSummary()
+  try:
+    #look in the specified or current directory for result files
+    if len(sys.argv) > 1:
+        targets_dir = sys.argv[1]
+    else:
+        targets_dir = './'
+    targets = list(map(lambda x: x.replace('\\', '/'), glob(targets_dir + '*.test*')))
+    if len(targets) == 0:
+        raise Exception("No *.testpass or *.testfail files found in '%s'" % targets_dir)
+    uts.set_targets(targets)
+
+    #set the root path
+    if len(sys.argv) > 2:
+        root_path = sys.argv[2]
+    else:
+        root_path = os.path.split(__file__)[0]
+    uts.set_root_path(root_path)
+
+    #run the summarizer
+    print(uts.run())
+  except Exception as e:
+    uts.usage(e)

data/vendor/cmock/vendor/unity/auto/unity_test_summary.rb

@@ -0,0 +1,136 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ==========================================
+
+# !/usr/bin/ruby
+#
+# unity_test_summary.rb
+#
+require 'fileutils'
+require 'set'
+
+class UnityTestSummary
+  include FileUtils::Verbose
+
+  attr_reader :report, :total_tests, :failures, :ignored
+  attr_writer :targets, :root
+
+  def initialize(_opts = {})
+    @report = ''
+    @total_tests = 0
+    @failures = 0
+    @ignored = 0
+  end
+
+  def run
+    # Clean up result file names
+    results = @targets.map { |target| target.tr('\\', '/') }
+
+    # Dig through each result file, looking for details on pass/fail:
+    failure_output = []
+    ignore_output = []
+
+    results.each do |result_file|
+      lines = File.readlines(result_file).map(&:chomp)
+
+      raise "Empty test result file: #{result_file}" if lines.empty?
+
+      output = get_details(result_file, lines)
+      failure_output << output[:failures] unless output[:failures].empty?
+      ignore_output  << output[:ignores]  unless output[:ignores].empty?
+      tests, failures, ignored = parse_test_summary(lines)
+      @total_tests += tests
+      @failures += failures
+      @ignored += ignored
+    end
+
+    if @ignored > 0
+      @report += "\n"
+      @report += "--------------------------\n"
+      @report += "UNITY IGNORED TEST SUMMARY\n"
+      @report += "--------------------------\n"
+      @report += ignore_output.flatten.join("\n")
+    end
+
+    if @failures > 0
+      @report += "\n"
+      @report += "--------------------------\n"
+      @report += "UNITY FAILED TEST SUMMARY\n"
+      @report += "--------------------------\n"
+      @report += failure_output.flatten.join("\n")
+    end
+
+    @report += "\n"
+    @report += "--------------------------\n"
+    @report += "OVERALL UNITY TEST SUMMARY\n"
+    @report += "--------------------------\n"
+    @report += "#{@total_tests} TOTAL TESTS #{@failures} TOTAL FAILURES #{@ignored} IGNORED\n"
+    @report += "\n"
+  end
+
+  def usage(err_msg = nil)
+    puts "\nERROR: "
+    puts err_msg if err_msg
+    puts "\nUsage: unity_test_summary.rb result_file_directory/ root_path/"
+    puts '     result_file_directory - The location of your results files.'
+    puts '                             Defaults to current directory if not specified.'
+    puts '                             Should end in / if specified.'
+    puts '     root_path - Helpful for producing more verbose output if using relative paths.'
+    exit 1
+  end
+
+  protected
+
+  def get_details(_result_file, lines)
+    results = { failures: [], ignores: [], successes: [] }
+    lines.each do |line|
+      _src_file, _src_line, _test_name, status, _msg = line.split(/:/)
+      line_out = (@root && (@root != 0) ? "#{@root}#{line}" : line).gsub(/\//, '\\')
+      case status
+      when 'IGNORE' then results[:ignores]   << line_out
+      when 'FAIL'   then results[:failures]  << line_out
+      when 'PASS'   then results[:successes] << line_out
+      end
+    end
+    results
+  end
+
+  def parse_test_summary(summary)
+    raise "Couldn't parse test results: #{summary}" unless summary.find { |v| v =~ /(\d+) Tests (\d+) Failures (\d+) Ignored/ }
+    [Regexp.last_match(1).to_i, Regexp.last_match(2).to_i, Regexp.last_match(3).to_i]
+  end
+
+  def here
+    File.expand_path(File.dirname(__FILE__))
+  end
+end
+
+if $0 == __FILE__
+
+  # parse out the command options
+  opts, args = ARGV.partition { |v| v =~ /^--\w+/ }
+  opts.map! { |v| v[2..-1].to_sym }
+
+  # create an instance to work with
+  uts = UnityTestSummary.new(opts)
+
+  begin
+    # look in the specified or current directory for result files
+    args[0] ||= './'
+    targets = "#{ARGV[0].tr('\\', '/')}**/*.test*"
+    results = Dir[targets]
+    raise "No *.testpass, *.testfail, or *.testresults files found in '#{targets}'" if results.empty?
+    uts.targets = results
+
+    # set the root path
+    args[1] ||= Dir.pwd + '/'
+    uts.root = ARGV[1]
+
+    # run the summarizer
+    puts uts.run
+  rescue StandardError => e
+    uts.usage e.message
+  end
+end

data/vendor/cmock/vendor/unity/auto/unity_to_junit.py

@@ -0,0 +1,146 @@
+import sys
+import os
+from glob import glob
+
+from pyparsing import *
+from junit_xml import TestSuite, TestCase
+
+
+class UnityTestSummary:
+    def __init__(self):
+        self.report = ''
+        self.total_tests = 0
+        self.failures = 0
+        self.ignored = 0
+        self.targets = 0
+        self.root = None
+        self.test_suites = dict()
+
+    def run(self):
+        # Clean up result file names
+        results = []
+        for target in self.targets:
+            results.append(target.replace('\\', '/'))
+
+        # Dig through each result file, looking for details on pass/fail:
+        for result_file in results:
+            lines = list(map(lambda line: line.rstrip(), open(result_file, "r").read().split('\n')))
+            if len(lines) == 0:
+                raise Exception("Empty test result file: %s" % result_file)
+
+            # define an expression for your file reference
+            entry_one = Combine(
+                oneOf(list(alphas)) + ':/' +
+                Word(alphanums + '_-./'))
+
+            entry_two = Word(printables + ' ', excludeChars=':')
+            entry = entry_one | entry_two
+
+            delimiter = Literal(':').suppress()
+            tc_result_line = Group(entry.setResultsName('tc_file_name') + delimiter + entry.setResultsName(
+                'tc_line_nr') + delimiter + entry.setResultsName('tc_name') + delimiter + entry.setResultsName(
+                'tc_status') + Optional(
+                delimiter + entry.setResultsName('tc_msg'))).setResultsName("tc_line")
+
+            eol = LineEnd().suppress()
+            sol = LineStart().suppress()
+            blank_line = sol + eol
+
+            tc_summary_line = Group(Word(nums).setResultsName("num_of_tests") + "Tests" + Word(nums).setResultsName(
+                "num_of_fail") + "Failures" + Word(nums).setResultsName("num_of_ignore") + "Ignored").setResultsName(
+                "tc_summary")
+            tc_end_line = Or(Literal("FAIL"), Literal('Ok')).setResultsName("tc_result")
+
+            # run it and see...
+            pp1 = tc_result_line | Optional(tc_summary_line | tc_end_line)
+            pp1.ignore(blank_line | OneOrMore("-"))
+
+            result = list()
+            for l in lines:
+                result.append((pp1.parseString(l)).asDict())
+            # delete empty results
+            result = filter(None, result)
+
+            tc_list = list()
+            for r in result:
+                if 'tc_line' in r:
+                    tmp_tc_line = r['tc_line']
+
+                    # get only the file name which will be used as the classname
+                    file_name = tmp_tc_line['tc_file_name'].split('\\').pop().split('/').pop().rsplit('.', 1)[0]
+                    tmp_tc = TestCase(name=tmp_tc_line['tc_name'], classname=file_name)
+                    if 'tc_status' in tmp_tc_line:
+                        if str(tmp_tc_line['tc_status']) == 'IGNORE':
+                            if 'tc_msg' in tmp_tc_line:
+                                tmp_tc.add_skipped_info(message=tmp_tc_line['tc_msg'],
+                                                        output=r'[File]={0}, [Line]={1}'.format(
+                                                            tmp_tc_line['tc_file_name'], tmp_tc_line['tc_line_nr']))
+                            else:
+                                tmp_tc.add_skipped_info(message=" ")
+                        elif str(tmp_tc_line['tc_status']) == 'FAIL':
+                            if 'tc_msg' in tmp_tc_line:
+                                tmp_tc.add_failure_info(message=tmp_tc_line['tc_msg'],
+                                                        output=r'[File]={0}, [Line]={1}'.format(
+                                                            tmp_tc_line['tc_file_name'], tmp_tc_line['tc_line_nr']))
+                            else:
+                                tmp_tc.add_failure_info(message=" ")
+
+                    tc_list.append((str(result_file), tmp_tc))
+
+            for k, v in tc_list:
+                try:
+                    self.test_suites[k].append(v)
+                except KeyError:
+                    self.test_suites[k] = [v]
+        ts = []
+        for suite_name in self.test_suites:
+            ts.append(TestSuite(suite_name, self.test_suites[suite_name]))
+
+        with open('result.xml', 'w') as f:
+            TestSuite.to_file(f, ts, prettyprint='True', encoding='utf-8')
+
+        return self.report
+
+    def set_targets(self, target_array):
+        self.targets = target_array
+
+    def set_root_path(self, path):
+        self.root = path
+
+    @staticmethod
+    def usage(err_msg=None):
+        print("\nERROR: ")
+        if err_msg:
+            print(err_msg)
+        print("\nUsage: unity_test_summary.py result_file_directory/ root_path/")
+        print("     result_file_directory - The location of your results files.")
+        print("                             Defaults to current directory if not specified.")
+        print("                             Should end in / if specified.")
+        print("     root_path - Helpful for producing more verbose output if using relative paths.")
+        sys.exit(1)
+
+
+if __name__ == '__main__':
+    uts = UnityTestSummary()
+    try:
+        # look in the specified or current directory for result files
+        if len(sys.argv) > 1:
+            targets_dir = sys.argv[1]
+        else:
+            targets_dir = './'
+        targets = list(map(lambda x: x.replace('\\', '/'), glob(targets_dir + '*.test*')))
+        if len(targets) == 0:
+            raise Exception("No *.testpass or *.testfail files found in '%s'" % targets_dir)
+        uts.set_targets(targets)
+
+        # set the root path
+        if len(sys.argv) > 2:
+            root_path = sys.argv[2]
+        else:
+            root_path = os.path.split(__file__)[0]
+        uts.set_root_path(root_path)
+
+        # run the summarizer
+        print(uts.run())
+    except Exception as e:
+        UnityTestSummary.usage(e)