ceedling 0.0.2 → 0.0.3

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/settings/cmock_demo.cspy.bat

@@ -1,32 +0,0 @@
-@REM This bat file has been generated by the IAR Embeddded Workbench
-@REM C-SPY interactive debugger,as an aid to preparing a command
-@REM line for running the cspybat command line utility with the
-@REM appropriate settings.
-@REM
-@REM After making some adjustments to this file, you can launch cspybat
-@REM by typing the name of this file followed by the name of the debug
-@REM file (usually an ubrof file). Note that this file is generated
-@REM every time a new debug session is initialized, so you may want to
-@REM move or rename the file before making changes.
-@REM
-@REM Note: some command line arguments cannot be properly generated
-@REM by this process. Specifically, the plugin which is responsible
-@REM for the Terminal I/O window (and other C runtime functionality)
-@REM comes in a special version for cspybat, and the name of that
-@REM plugin dll is not known when generating this file. It resides in
-@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
-@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
-@REM tool chain. Replace the '<libsupport_plugin>' parameter
-@REM below with the appropriate file name. Other plugins loaded by
-@REM C-SPY are usually not needed by, or will not work in, cspybat
-@REM but they are listed at the end of this file for reference.
-
-
-"C:\Program Files\IAR Systems\Embedded Workbench 4.0\common\bin\cspybat" "C:\Program Files\IAR Systems\Embedded Workbench 4.0\ARM\bin\armproc.dll" "C:\Program Files\IAR Systems\Embedded Workbench 4.0\ARM\bin\armjlink.dll"  %1 --plugin "C:\Program Files\IAR Systems\Embedded Workbench 4.0\ARM\bin\<libsupport_plugin>" --macro "C:\svn\cmock\iar\iar_v4\Resource\SAM7_FLASH.mac" --backend -B "--endian" "little" "--cpu" "ARM7TDMI" "--fpu" "None" "--proc_device_desc_file" "C:\Program Files\IAR Systems\Embedded Workbench 4.0\ARM\CONFIG\ioAT91SAM7X256.ddf" "--drv_verify_download" "all" "--proc_driver" "jlink" "--jlink_connection" "USB:0" "--jlink_initial_speed" "32" 
-
-
-@REM loaded plugins:
-@REM    armlibsupport.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 4.0\common\plugins\CodeCoverage\CodeCoverage.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 4.0\common\plugins\Profiling\Profiling.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 4.0\common\plugins\stack\stack.dll

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/settings/cmock_demo.dbgdt

@@ -1,86 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<Project>
-  <Desktop>
-    <Static>
-      <Debug-Log/>
-      <Workspace>
-        <ColumnWidths>
-          
-          
-          
-          
-        <Column0>185</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
-      </Workspace>
-      <Disassembly>
-        
-        
-        
-      <MixedMode>1</MixedMode><CodeCovEnabled>0</CodeCovEnabled><CodeCovShow>0</CodeCovShow></Disassembly>
-      <Build>
-        <ColumnWidth0>20</ColumnWidth0>
-        <ColumnWidth1>1115</ColumnWidth1>
-        <ColumnWidth2>297</ColumnWidth2>
-        <ColumnWidth3>74</ColumnWidth3>
-      </Build>
-    <TerminalIO><InputSource>1</InputSource><InputMode>10</InputMode><Filename>$PROJ_DIR$\TermIOInput.txt</Filename><InputEcho>1</InputEcho><ShowReset>0</ShowReset></TerminalIO></Static>
-    <Windows>
-      
-      
-      
-    <Wnd0>
-        <Tabs>
-          <Tab>
-            <Identity>TabID-23656-3537</Identity>
-            <TabName>Debug Log</TabName>
-            <Factory>Debug-Log</Factory>
-            <Session/>
-          </Tab>
-          <Tab>
-            <Identity>TabID-22088-3567</Identity>
-            <TabName>Build</TabName>
-            <Factory>Build</Factory>
-            <Session/>
-          </Tab>
-        <Tab><Identity>TabID-16970-5692</Identity><TabName>Terminal I/O</TabName><Factory>TerminalIO</Factory><Session/></Tab></Tabs>
-        
-      <SelectedTab>0</SelectedTab></Wnd0><Wnd1>
-        <Tabs>
-          <Tab>
-            <Identity>TabID-1637-3541</Identity>
-            <TabName>Workspace</TabName>
-            <Factory>Workspace</Factory>
-            <Session>
-              
-            <NodeDict><ExpandedNode>cmock_demo</ExpandedNode><ExpandedNode>cmock_demo/source</ExpandedNode></NodeDict></Session>
-          </Tab>
-        </Tabs>
-        
-      <SelectedTab>0</SelectedTab></Wnd1><Wnd2>
-        <Tabs>
-          <Tab>
-            <Identity>TabID-12385-3544</Identity>
-            <TabName>Disassembly</TabName>
-            <Factory>Disassembly</Factory>
-            <Session/>
-          </Tab>
-        </Tabs>
-        
-      <SelectedTab>0</SelectedTab></Wnd2></Windows>
-    <Editor>
-      
-      
-      
-      
-    <Pane><Tab><Factory>TextEditor</Factory><Filename>C:\svn\cmock\examples\src\Main.c</Filename><XPos>0</XPos><YPos>27</YPos><SelStart>806</SelStart><SelEnd>806</SelEnd></Tab><ActiveTab>0</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
-    <Positions>
-      
-      
-      
-      
-      
-    <Top><Row0><Sizes><Toolbar-008fe8c8><key>iaridepm1</key></Toolbar-008fe8c8></Sizes></Row0><Row1><Sizes><Toolbar-02331890><key>debuggergui1</key></Toolbar-02331890></Sizes></Row1></Top><Left><Row0><Sizes><Wnd1><Rect><Top>-2</Top><Left>-2</Left><Bottom>509</Bottom><Right>276</Right><x>-2</x><y>-2</y><xscreen>179</xscreen><yscreen>148</yscreen><sizeHorzCX>129149</sizeHorzCX><sizeHorzCY>173302</sizeHorzCY><sizeVertCX>200577</sizeVertCX><sizeVertCY>598361</sizeVertCY></Rect></Wnd1></Sizes></Row0></Left><Right><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>509</Bottom><Right>177</Right><x>-2</x><y>-2</y><xscreen>179</xscreen><yscreen>148</yscreen><sizeHorzCX>129149</sizeHorzCX><sizeHorzCY>173302</sizeHorzCY><sizeVertCX>129149</sizeVertCX><sizeVertCY>598361</sizeVertCY></Rect></Wnd2></Sizes></Row0></Right><Bottom><Row0><Sizes><Wnd0><Rect><Top>-2</Top><Left>-2</Left><Bottom>277</Bottom><Right>1388</Right><x>-2</x><y>-2</y><xscreen>1390</xscreen><yscreen>279</yscreen><sizeHorzCX>1002886</sizeHorzCX><sizeHorzCY>326698</sizeHorzCY><sizeVertCX>129149</sizeVertCX><sizeVertCY>173302</sizeVertCY></Rect></Wnd0></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>
-  </Desktop>
-</Project>
-
-

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/settings/cmock_demo.dni

@@ -1,42 +0,0 @@
-[JLinkDriver]
-WatchCond=_ 0
-Watch0=_ 0 "" 0 "" 0 "" 0 "" 0 0 0 0
-Watch1=_ 0 "" 0 "" 0 "" 0 "" 0 0 0 0
-[DisAssemblyWindow]
-NumStates=_ 1
-State 1=_ 1
-[StackPlugin]
-Enabled=1
-OverflowWarningsEnabled=1
-WarningThreshold=90
-SpWarningsEnabled=1
-WarnHow=0
-UseTrigger=1
-TriggerName=main
-LimitSize=0
-ByteLimit=50
-[Log file]
-LoggingEnabled=_ 0
-LogFile=_ ""
-Category=_ 0
-[TermIOLog]
-LoggingEnabled=_ 0
-LogFile=_ ""
-[Interrupts]
-Enabled=1
-Irq0=_ 0 480549 0 480549 0 0 0 100 0 1 "IRQ 1 0x18 CPSR.I"
-Count=1
-[MemoryMap]
-Enabled=0
-Base=0
-UseAuto=0
-TypeViolation=1
-UnspecRange=1
-ActionState=1
-[Disassemble mode]
-mode=0
-[Breakpoints]
-Count=0
-[TraceHelper]
-Enabled=0
-ShowSource=1

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/settings/cmock_demo.wsdt

@@ -1,76 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<Workspace>
-  <ConfigDictionary>
-    
-  <CurrentConfigs><Project>cmock_demo/Debug</Project></CurrentConfigs></ConfigDictionary>
-  <Desktop>
-    <Static>
-      <Workspace>
-        <ColumnWidths>
-          
-          
-          
-          
-        <Column0>237</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>
-      </Workspace>
-      <Build>
-        
-        
-        
-        
-      <ColumnWidth0>20</ColumnWidth0><ColumnWidth1>1115</ColumnWidth1><ColumnWidth2>297</ColumnWidth2><ColumnWidth3>74</ColumnWidth3></Build>
-      <Debug-Log/>
-      <TerminalIO/>
-      <CodeCoveragePlugin/>
-      <Profiling/>
-    <Disassembly><MixedMode>1</MixedMode><CodeCovEnabled>0</CodeCovEnabled><CodeCovShow>0</CodeCovShow></Disassembly></Static>
-    <Windows>
-      
-      
-    <Wnd1>
-        <Tabs>
-          <Tab>
-            <Identity>TabID-20770-112</Identity>
-            <TabName>Workspace</TabName>
-            <Factory>Workspace</Factory>
-            <Session>
-              
-            <NodeDict><ExpandedNode>cmock_demo</ExpandedNode><ExpandedNode>cmock_demo/Source</ExpandedNode><ExpandedNode>cmock_demo/source</ExpandedNode></NodeDict></Session>
-          </Tab>
-        </Tabs>
-        
-      <SelectedTab>0</SelectedTab></Wnd1><Wnd3>
-        <Tabs>
-          <Tab>
-            <Identity>TabID-10733-1323</Identity>
-            <TabName>Build</TabName>
-            <Factory>Build</Factory>
-            <Session/>
-          </Tab>
-          <Tab>
-            <Identity>TabID-27316-3469</Identity>
-            <TabName>Debug Log</TabName>
-            <Factory>Debug-Log</Factory>
-            <Session/>
-          </Tab>
-        </Tabs>
-        
-      <SelectedTab>0</SelectedTab></Wnd3></Windows>
-    <Editor>
-      
-      
-      
-      
-    <Pane><Tab><Factory>TextEditor</Factory><Filename>C:\svn\cmock\examples\src\Main.c</Filename><XPos>0</XPos><YPos>0</YPos><SelStart>568</SelStart><SelEnd>568</SelEnd></Tab><ActiveTab>0</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
-    <Positions>
-      
-      
-      
-      
-      
-    <Top><Row0><Sizes><Toolbar-008fe830><key>iaridepm1</key></Toolbar-008fe830></Sizes></Row0></Top><Left><Row0><Sizes><Wnd1><Rect><Top>-2</Top><Left>-2</Left><Bottom>554</Bottom><Right>328</Right><x>-2</x><y>-2</y><xscreen>179</xscreen><yscreen>148</yscreen><sizeHorzCX>129149</sizeHorzCX><sizeHorzCY>173302</sizeHorzCY><sizeVertCX>238095</sizeVertCX><sizeVertCY>651054</sizeVertCY></Rect></Wnd1></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes><Wnd3><Rect><Top>-2</Top><Left>-2</Left><Bottom>256</Bottom><Right>1388</Right><x>-2</x><y>-2</y><xscreen>1390</xscreen><yscreen>258</yscreen><sizeHorzCX>1002886</sizeHorzCX><sizeHorzCY>302108</sizeHorzCY><sizeVertCX>129149</sizeVertCX><sizeVertCY>173302</sizeVertCY></Rect></Wnd3></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>
-  </Desktop>
-</Workspace>
-
-

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/srcIAR/Cstartup.s79

@@ -1,266 +0,0 @@
-;-  ----------------------------------------------------------------------------
-;-          ATMEL Microcontroller Software Support  -  ROUSSET  -
-;-  ----------------------------------------------------------------------------
-;-  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-;-  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-;-  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-;-  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-;-  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-;-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-;-  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-;-  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-;-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-;-  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;-  ----------------------------------------------------------------------------
-;- File source          : Cstartup.s79
-;- Object               : Generic CStartup
-;- 1.0 01/Sep/05 FBr    : Creation
-;- 1.1 09/Sep/05 JPP    : Change Interrupt management
-;------------------------------------------------------------------------------
-
-;------------------------------------------------------------------------------
-; Include your AT91 Library files
-;------------------------------------------------------------------------------
-#include "AT91SAM7X256_inc.h"
-;------------------------------------------------------------------------------
-
-;------------------------------------------------------------------------------
-; ?RESET
-; Reset Vector.
-; Normally, segment INTVEC is linked at address 0.
-; For debugging purposes, INTVEC may be placed at other addresses.
-; A debugger that honors the entry point will start the
-; program in a normal way even if INTVEC is not at address 0.
-;------------------------------------------------------------------------------
-
-    PROGRAM	?RESET              ;- Begins a program module
-    RSEG	INTRAMEND_REMAP     ;- Begins a relocatable segment
-    RSEG	ICODE:CODE (2)      ;- Begins a relocatable segment : corresponding address is 32-bit aligned
-    CODE32	                    ;- Always ARM mode after reset	
-    ORG	0	                    ;- Sets the location counter: corresponds to the RESET vector address
-
-;------------------------------------------------------------------------------
-;- Exception vectors
-;------------------------------------------------------------------------------
-;- These vectors can be read at address 0 or at RAM address
-;- They ABSOLUTELY requires to be in relative addresssing mode in order to
-;- guarantee a valid jump. For the moment, all are just looping.
-;- If an exception occurs before remap, this would result in an infinite loop.
-;- To ensure if a exeption occurs before start application to infinite loop.
-;------------------------------------------------------------------------------
-
-reset
-                B           InitReset           ; 0x00 Reset handler
-undefvec:
-                B           undefvec            ; 0x04 Undefined Instruction
-swivec:
-                B           swivec              ; 0x08 Software Interrupt
-pabtvec:
-                B           pabtvec             ; 0x0C Prefetch Abort
-dabtvec:
-                B           dabtvec             ; 0x10 Data Abort
-rsvdvec:
-                B           rsvdvec             ; 0x14 reserved
-irqvec:
-                B           IRQ_Handler_Entry   ; 0x18 IRQ
-              				
-fiqvec:               				; 0x1c FIQ
-;------------------------------------------------------------------------------
-;- Function             : FIQ_Handler_Entry
-;- Treatments           : FIQ Controller Interrupt Handler.
-;- Called Functions     : AIC_FVR[interrupt]
-;------------------------------------------------------------------------------
-
-FIQ_Handler_Entry:
-
-;- Switch in SVC/User Mode to allow User Stack access for C code
-; because the FIQ is not yet acknowledged
-
-;- Save and r0 in FIQ_Register
-            mov         r9,r0
-	    ldr         r0 , [r8, #AIC_FVR]
-            msr         CPSR_c,#I_BIT | F_BIT | ARM_MODE_SVC
-;- Save scratch/used registers and LR in User Stack
-            stmfd       sp!, { r1-r3, r12, lr}
-
-;- Branch to the routine pointed by the AIC_FVR
-            mov         r14, pc
-            bx          r0
-
-;- Restore scratch/used registers and LR from User Stack
-            ldmia       sp!, { r1-r3, r12, lr}
-
-;- Leave Interrupts disabled and switch back in FIQ mode
-            msr         CPSR_c, #I_BIT | F_BIT | ARM_MODE_FIQ
-
-;- Restore the R0 ARM_MODE_SVC register
-            mov         r0,r9
-
-;- Restore the Program Counter using the LR_fiq directly in the PC
-            subs        pc,lr,#4
-
-;------------------------------------------------------------------------------
-;- Manage exception: The exception must be ensure in ARM mode
-;------------------------------------------------------------------------------
-;------------------------------------------------------------------------------
-;- Function             : IRQ_Handler_Entry
-;- Treatments           : IRQ Controller Interrupt Handler.
-;- Called Functions     : AIC_IVR[interrupt]
-;------------------------------------------------------------------------------
-IRQ_Handler_Entry:
-
-;-------------------------
-;- Manage Exception Entry
-;-------------------------
-;- Adjust and save LR_irq in IRQ stack
-    sub         lr, lr, #4
-    stmfd       sp!, {lr}
-
-;- Save r0 and SPSR (need to be saved for nested interrupt)
-    mrs         r14, SPSR
-    stmfd       sp!, {r0,r14}
-
-;- Write in the IVR to support Protect Mode
-;- No effect in Normal Mode
-;- De-assert the NIRQ and clear the source in Protect Mode
-    ldr         r14, =AT91C_BASE_AIC
-    ldr         r0 , [r14, #AIC_IVR]
-    str         r14, [r14, #AIC_IVR]
-
-;- Enable Interrupt and Switch in Supervisor Mode
-    msr         CPSR_c, #ARM_MODE_SVC
-
-;- Save scratch/used registers and LR in User Stack
-    stmfd       sp!, { r1-r3, r12, r14}
-
-;----------------------------------------------
-;- Branch to the routine pointed by the AIC_IVR
-;----------------------------------------------
-    mov         r14, pc
-    bx          r0
-
-;----------------------------------------------
-;- Manage Exception Exit
-;----------------------------------------------
-;- Restore scratch/used registers and LR from User Stack
-    ldmia       sp!, { r1-r3, r12, r14}
-
-;- Disable Interrupt and switch back in IRQ mode
-    msr         CPSR_c, #I_BIT | ARM_MODE_IRQ
-
-;- Mark the End of Interrupt on the AIC
-    ldr         r14, =AT91C_BASE_AIC
-    str         r14, [r14, #AIC_EOICR]
-
-;- Restore SPSR_irq and r0 from IRQ stack
-    ldmia       sp!, {r0,r14}
-    msr         SPSR_cxsf, r14
-
-;- Restore adjusted  LR_irq from IRQ stack directly in the PC
-    ldmia       sp!, {pc}^
-
-
-
-InitReset:
-
-;------------------------------------------------------------------------------
-;- Low level Init is performed in a C function: AT91F_LowLevelInit
-;- Init Stack Pointer to a valid memory area before calling AT91F_LowLevelInit
-;------------------------------------------------------------------------------
-
-;- Retrieve end of RAM address
-__iramend EQU SFB(INTRAMEND_REMAP)      ;- Segment begin
-
-    EXTERN   AT91F_LowLevelInit
-    ldr     r13,=__iramend              ;- Temporary stack in internal RAM for Low Level Init execution
-    ldr	    r0,=AT91F_LowLevelInit
-    mov     lr, pc
-    bx	    r0                          ;- Branch on C function (with interworking)
-
-;------------------------------------------------------------------------------
-;- Top of Stack Definition
-;------------------------------------------------------------------------------
-;- Interrupt and Supervisor Stack are located at the top of internal memory in
-;- order to speed the exception handling context saving and restoring.
-;- ARM_MODE_SVC (Application, C) Stack is located at the top of the external memory.
-;------------------------------------------------------------------------------
-
-IRQ_STACK_SIZE          EQU     (3*8*4)     ; 3 words to be saved per interrupt priority level
-ARM_MODE_FIQ            EQU     0x11
-ARM_MODE_IRQ            EQU     0x12
-ARM_MODE_SVC            EQU     0x13
-I_BIT                   EQU     0x80
-F_BIT                   EQU     0x40
-
-;------------------------------------------------------------------------------
-;- Setup the stack for each mode
-;------------------------------------------------------------------------------
-    ldr     r0, =__iramend
-
-;- Set up Fast Interrupt Mode and set FIQ Mode Stack
-            msr     CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT
-;- Init the FIQ register
-            ldr     r8, =AT91C_BASE_AIC
-
-;- Set up Interrupt Mode and set IRQ Mode Stack
-    msr     CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT
-    mov     r13, r0                     ; Init stack IRQ
-    sub     r0, r0, #IRQ_STACK_SIZE
-
-;- Enable interrupt & Set up Supervisor Mode and set Supervisor Mode Stack
-    msr     CPSR_c, #ARM_MODE_SVC
-    mov     r13, r0
-
-;------------------------------------------------------------------------------
-; Initialize segments.
-;------------------------------------------------------------------------------
-; __segment_init is assumed to use
-; instruction set and to be reachable by BL from the ICODE segment
-; (it is safest to link them in segment ICODE).
-;------------------------------------------------------------------------------
-    EXTERN	__segment_init
-    ldr	r0,=__segment_init
-    mov     lr, pc
-    bx	r0
-
-;------------------------------------------------------------------------------
-;- Branch on C code Main function (with interworking)
-;------------------------------------------------------------------------------
-    EXTERN	main
-    PUBLIC	__main
-?jump_to_main:
-    ldr	lr,=?call_exit
-    ldr	r0,=main
-__main:
-    bx	r0
-
-;------------------------------------------------------------------------------
-;- Loop for ever
-;------------------------------------------------------------------------------
-;- End of application. Normally, never occur.
-;- Could jump on Software Reset ( B 0x0 ).
-;------------------------------------------------------------------------------
-?call_exit:
-End
-    b       End
-
-;------------------------------------------------------------------------------
-;- Exception Vectors
-;------------------------------------------------------------------------------
-    PUBLIC    AT91F_Default_FIQ_handler
-    PUBLIC    AT91F_Default_IRQ_handler
-    PUBLIC    AT91F_Spurious_handler
-
-    CODE32      ; Always ARM mode after exeption
-
-AT91F_Default_FIQ_handler
-    b         AT91F_Default_FIQ_handler
-
-AT91F_Default_IRQ_handler
-    b         AT91F_Default_IRQ_handler
-
-AT91F_Spurious_handler
-    b         AT91F_Spurious_handler
-
-    ENDMOD      ;- Terminates the assembly of the current module
-    END         ;- Terminates the assembly of the last module in a file