ceedling 0.0.2 → 0.0.3

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestTemperatureCalculator.c

@@ -1,33 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "TemperatureCalculator.h"
-#include <math.h>
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testTemperatureCalculatorShouldCalculateTemperatureFromMillivolts(void)
-{
-  float result;
-
-  // Series resistor is 5k Ohms; Reference voltage is 3.0V
-  // R(t) = A * e^(B*t); R is resistance of thermisor; t is temperature in C
-  result = TemperatureCalculator_Calculate(1000);
-  TEST_ASSERT_FLOAT_WITHIN(0.01f, 25.0f, result);
-
-  result = TemperatureCalculator_Calculate(2985);
-  TEST_ASSERT_FLOAT_WITHIN(0.01f, 68.317f, result);
-
-  result = TemperatureCalculator_Calculate(3);
-  TEST_ASSERT_FLOAT_WITHIN(0.01f, -19.96f, result);
-}
-
-void testShouldReturnNegativeInfinityWhen_0_millivoltsInput(void)
-{
-  TEST_ASSERT_FLOAT_WITHIN(0.0000001f, -INFINITY, TemperatureCalculator_Calculate(0));
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestTemperatureFilter.c

@@ -1,69 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "TemperatureFilter.h"
-#include <math.h>
-
-void setUp(void)
-{
-  TemperatureFilter_Init();
-}
-
-void tearDown(void)
-{
-}
-
-void testShouldInitializeTemeratureToInvalidValue(void)
-{
-  TemperatureFilter_Init();
-  TEST_ASSERT_FLOAT_WITHIN(0.0001f, -INFINITY, TemperatureFilter_GetTemperatureInCelcius());
-}
-
-void testShouldInitializeTemperatureAfterCallToInit(void)
-{
-  TemperatureFilter_Init();
-  TemperatureFilter_ProcessInput(17.8f);
-  TEST_ASSERT_FLOAT_WITHIN(0.0001f, 17.8f, TemperatureFilter_GetTemperatureInCelcius());
-
-  TemperatureFilter_Init();
-  TemperatureFilter_ProcessInput(32.6f);
-  TEST_ASSERT_FLOAT_WITHIN(0.0001f, 32.6f, TemperatureFilter_GetTemperatureInCelcius());
-}
-
-void setValueAndVerifyResponse(float input, float response)
-{
-  float actual;
-  TemperatureFilter_ProcessInput(input);
-  actual = TemperatureFilter_GetTemperatureInCelcius();
-  TEST_ASSERT_FLOAT_WITHIN(0.0001f, response, actual);
-}
-
-void testShouldWeightEachSubsequentValueBy25PercentAfterInitialValue(void)
-{
-  TemperatureFilter_Init();
-  setValueAndVerifyResponse(0.0f, 0.0f);
-  setValueAndVerifyResponse(10.0f, 2.5f);
-  setValueAndVerifyResponse(10.0f, 4.375f);
-  setValueAndVerifyResponse(10.0f, 5.78125f);
-
-  TemperatureFilter_Init();
-  setValueAndVerifyResponse(100.0f, 100.0f);
-  setValueAndVerifyResponse(0.0f, 75.0f);
-  setValueAndVerifyResponse(0.0f, 56.25f);
-  setValueAndVerifyResponse(0.0f, 42.1875f);
-}
-
-void setInvalidTemperatureAndVerifyReinitialized(float invalidTemperature)
-{
-  TemperatureFilter_Init();
-  setValueAndVerifyResponse(100.0f, 100.0f);
-  setValueAndVerifyResponse(invalidTemperature, -INFINITY);
-  setValueAndVerifyResponse(14.3f, 14.3f);
-}
-
-void testShouldResetAverageIfPassedInfinityOrInvalidValue(void)
-{
-  setInvalidTemperatureAndVerifyReinitialized(-INFINITY);
-  setInvalidTemperatureAndVerifyReinitialized(+INFINITY);
-  setInvalidTemperatureAndVerifyReinitialized(+NAN);
-  setInvalidTemperatureAndVerifyReinitialized(-NAN);
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestTimerConductor.c

@@ -1,32 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "TimerConductor.h"
-#include "MockTimerHardware.h"
-#include "MockTimerModel.h"
-#include "MockTimerInterruptHandler.h"
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testInitShouldCallHardwareInit(void)
-{
-  TimerHardware_Init_Expect();
-
-  TimerConductor_Init();
-}
-
-void testRunShouldGetSystemTimeAndPassOnToModelForEventScheduling(void)
-{
-  Timer_GetSystemTime_ExpectAndReturn(1230);
-  TimerModel_UpdateTime_Expect(1230);
-  TimerConductor_Run();
-
-  Timer_GetSystemTime_ExpectAndReturn(837460);
-  TimerModel_UpdateTime_Expect(837460);
-  TimerConductor_Run();
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestTimerHardware.c

@@ -1,26 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "TimerHardware.h"
-#include "MockTimerConfigurator.h"
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testInitShouldDelegateAppropriatelyToConfigurator(void)
-{
-  Timer_EnablePeripheralClocks_Expect();
-  Timer_Reset_Expect();
-  Timer_ConfigureMode_Expect();
-  Timer_ConfigurePeriod_Expect();
-  Timer_EnableOutputPin_Expect();
-  Timer_Enable_Expect();
-  Timer_ConfigureInterruptHandler_Expect();
-  Timer_Start_Expect();
-
-  TimerHardware_Init();
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestTimerModel.c

@@ -1,18 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "TimerModel.h"
-#include "MockTaskScheduler.h"
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testUpdateTimeShouldDelegateToTaskScheduler(void)
-{
-  TaskScheduler_Update_Expect(19387L);
-  TimerModel_UpdateTime(19387L);
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestUsartBaudRateRegisterCalculator.c

@@ -1,21 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "UsartBaudRateRegisterCalculator.h"
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testCalculateBaudRateRegisterSettingShouldCalculateRegisterSettingAppropriately(void)
-{
-  // BaudRate = MCK / (CD x 16) - per datasheet section 30.6.1.2 "Baud Rate Calculation Example"
-  TEST_ASSERT_EQUAL(26, UsartModel_CalculateBaudRateRegisterSetting(48000000, 115200));
-  TEST_ASSERT_EQUAL(6,  UsartModel_CalculateBaudRateRegisterSetting(3686400,  38400));
-  TEST_ASSERT_EQUAL(23, UsartModel_CalculateBaudRateRegisterSetting(14318180, 38400));
-  TEST_ASSERT_EQUAL(20, UsartModel_CalculateBaudRateRegisterSetting(12000000, 38400));
-  TEST_ASSERT_EQUAL(13, UsartModel_CalculateBaudRateRegisterSetting(12000000, 56800));
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestUsartConductor.c

@@ -1,40 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "UsartConductor.h"
-#include "MockUsartModel.h"
-#include "MockUsartHardware.h"
-#include "MockTaskScheduler.h"
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testShouldInitializeHardwareWhenInitCalled(void)
-{
-  UsartModel_GetBaudRateRegisterSetting_ExpectAndReturn(4);
-  UsartModel_GetWakeupMessage_ExpectAndReturn("Hey there!");
-  UsartHardware_TransmitString_Expect("Hey there!");
-  UsartHardware_Init_Expect(4);
-
-  UsartConductor_Init();
-}
-
-void testRunShouldNotDoAnythingIfSchedulerSaysItIsNotTimeYet(void)
-{
-  TaskScheduler_DoUsart_ExpectAndReturn(FALSE);
-
-  UsartConductor_Run();
-}
-
-void testRunShouldGetCurrentTemperatureAndTransmitIfSchedulerSaysItIsTime(void)
-{
-  TaskScheduler_DoUsart_ExpectAndReturn(TRUE);
-  UsartModel_GetFormattedTemperature_ExpectAndReturn("hey there");
-  UsartHardware_TransmitString_Expect("hey there");
-
-  UsartConductor_Run();
-}

data/new_project_template/vendor/ceedling/vendor/cmock/examples/test/TestUsartModel.c

@@ -1,40 +0,0 @@
-#include "unity.h"
-#include "Types.h"
-#include "UsartModel.h"
-#include "ModelConfig.h"
-#include "MockTemperatureFilter.h"
-#include "MockUsartBaudRateRegisterCalculator.h"
-#include <math.h>
-
-void setUp(void)
-{
-}
-
-void tearDown(void)
-{
-}
-
-void testGetBaudRateRegisterSettingShouldReturnAppropriateBaudRateRegisterSetting(void)
-{
-  uint8 dummyRegisterSetting = 17;
-  UsartModel_CalculateBaudRateRegisterSetting_ExpectAndReturn(MASTER_CLOCK, USART0_BAUDRATE, dummyRegisterSetting);
-
-  TEST_ASSERT_EQUAL(dummyRegisterSetting, UsartModel_GetBaudRateRegisterSetting());
-}
-
-void testGetFormattedTemperatureFormatsTemperatureFromCalculatorAppropriately(void)
-{
-  TemperatureFilter_GetTemperatureInCelcius_ExpectAndReturn(25.0f);
-  TEST_ASSERT_EQUAL_STRING("25.0 C\n", UsartModel_GetFormattedTemperature());
-}
-
-void testShouldReturnErrorMessageUponInvalidTemperatureValue(void)
-{
-  TemperatureFilter_GetTemperatureInCelcius_ExpectAndReturn(-INFINITY);
-  TEST_ASSERT_EQUAL_STRING("Temperature sensor failure!\n", UsartModel_GetFormattedTemperature());
-}
-
-void testShouldReturnWakeupMessage(void)
-{
-  TEST_ASSERT_EQUAL_STRING("It's Awesome Time!\n", UsartModel_GetWakeupMessage());
-}

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/Resource/SAM7_FLASH.mac

@@ -1,71 +0,0 @@
-//  ----------------------------------------------------------------------------
-//          ATMEL Microcontroller Software Support  -  ROUSSET  -
-//  ----------------------------------------------------------------------------
-//  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-//  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-//  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-//  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-//  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-//  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-//  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//  ----------------------------------------------------------------------------
-//  File Name           : SAM7_FLASH.mac
-//  Object              : Generic Macro File for IAR
-//  1.0 17/Aug/05 FBr   : Creation
-//  ----------------------------------------------------------------------------
-
-/*********************************************************************
-*
-*       _InitRSTC()
-*
-* Function description
-*   Initializes the RSTC (Reset controller).
-*   This makes sense since the default is to not allow user resets, which makes it impossible to
-*   apply a second RESET via J-Link
-*/
-_InitRSTC() {
-    __writeMemory32(0xA5000001, 0xFFFFFD08,"Memory");    // Allow user reset
-}
-
-/*********************************************************************
-*
-*       _InitPLL()
-* Function description
-*   Initializes the PMC.
-*   1. Enable the Main Oscillator
-*   2. Configure PLL to 96MHz
-*   3. Switch Master Clock (MCK) on PLL/2 = 48MHz
-*/
-    _InitPLL() {
-
-    __message "Enable Main Oscillator";
-    __writeMemory32(0x00000601,0xFFFFFc20,"Memory");    // MOSC
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x1)  );
-
-    __message "Set PLL to 96MHz";
-    __writeMemory32(0x10191c05,0xFFFFFc2c,"Memory");    // LOCK
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x4)  );
-
-    __message "Set Master Clock to 48MHz";
-    __writeMemory32(0x00000004,0xFFFFFc30,"Memory");    // MCKRDY
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8)  );
-    __writeMemory32(0x00000007,0xFFFFFc30,"Memory");    // MCKRDY
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8)  );
-}
-
-/*********************************************************************
-*
-*       execUserReset() : JTAG set initially to Full Speed
-*/
-execUserReset() {
-    __message "execUserReset()";
-    __emulatorSpeed(30000);             // Set JTAG speed to 30kHz to make a hardware reset
-    __hwReset(0);                       // Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
-    _InitPLL();                         // Allow to debug at JTAG Full Speed
-    _InitRSTC();                        // Enable User Reset to allow execUserReset() execution
-    __emulatorSpeed(0);                 // Set JTAG speed to full speed
-}
-

data/new_project_template/vendor/ceedling/vendor/cmock/iar/iar_v4/Resource/SAM7_RAM.mac

@@ -1,94 +0,0 @@
-//  ----------------------------------------------------------------------------
-//          ATMEL Microcontroller Software Support  -  ROUSSET  -
-//  ----------------------------------------------------------------------------
-//  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-//  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-//  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-//  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-//  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-//  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-//  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//  ----------------------------------------------------------------------------
-//  File Name           : SAM7_RAM.mac
-//  Object              : Generic Macro File for IAR
-//  1.0 17/Aug/05 FBr   : Creation
-//  ----------------------------------------------------------------------------
-
-/*********************************************************************
-*
-*       _MapRAMAt0()
-*
-* Function description
-*   Maps RAM at 0.
-*/
-_MapRAMAt0(){
-    __message "Changing mapping: RAM mapped to 0";
-    __writeMemory32(0x00000001,0xFFFFFF00,"Memory");
-}
-
-/*********************************************************************
-*
-*       _InitRSTC()
-*
-* Function description
-*   Initializes the RSTC (Reset controller).
-*   This makes sense since the default is to not allow user resets, which makes it impossible to
-*   apply a second RESET via J-Link
-*/
-_InitRSTC() {
-    __writeMemory32(0xA5000001, 0xFFFFFD08,"Memory");    // Allow user reset
-}
-
-/*********************************************************************
-*
-*       _InitPLL()
-* Function description
-*   Initializes the PMC.
-*   1. Enable the Main Oscillator
-*   2. Configure PLL to 96MHz
-*   3. Switch Master Clock (MCK) on PLL/2 = 48MHz
-*/
-    _InitPLL() {
-
-    __message "Set Main Oscillator";
-    __writeMemory32(0x00004001,0xFFFFFc20,"Memory");    // MOSC
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x1)  );
-
-    __message "Set PLL to 96MHz";
-    __writeMemory32(0x10483f0e,0xFFFFFc2c,"Memory");    // LOCK
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x4)  );
-
-    __message "Set Master Clock to 48MHz";
-    __writeMemory32(0x00000004,0xFFFFFc30,"Memory");    // MCKRDY
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8)  );
-    __writeMemory32(0x00000007,0xFFFFFc30,"Memory");    // MCKRDY
-    while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8)  );
-}
-
-/*********************************************************************
-*
-*       execUserReset() : JTAG set initially to Full Speed
-*/
-execUserReset() {
-    __message "execUserReset()";
-    __emulatorSpeed(30000);             // Set JTAG speed to 30kHz to make a hardware reset
-    __hwReset(0);                       // Hardware Reset: CPU is automatically halted after the reset
-    _InitPLL();                         // Allow to debug at JTAG Full Speed
-    _MapRAMAt0();                       // Remap RAM to address 0
-    __emulatorSpeed(0);                 // Set JTAG speed to full speed
-}
-
-/*********************************************************************
-*
-*       execUserPreload() : JTAG set initially to 32kHz
-*/
-execUserPreload() {
-    __message "execUserPreload()";
-    __hwReset(0);                       // Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
-    _InitPLL();                         // Allow to load Code at JTAG Full Speed
-    _MapRAMAt0();                       // Remap RAM to address 0
-    _InitRSTC();                        // Enable User Reset to allow execUserReset() execution
-}