brwy_rails 0.0.1

data/test/dummy/node_modules/pako/lib/zlib/trees.js

@@ -0,0 +1,1199 @@
+'use strict';
+
+
+var utils = require('../utils/common');
+
+/* Public constants ==========================================================*/
+/* ===========================================================================*/
+
+
+//var Z_FILTERED          = 1;
+//var Z_HUFFMAN_ONLY      = 2;
+//var Z_RLE               = 3;
+var Z_FIXED               = 4;
+//var Z_DEFAULT_STRATEGY  = 0;
+
+/* Possible values of the data_type field (though see inflate()) */
+var Z_BINARY              = 0;
+var Z_TEXT                = 1;
+//var Z_ASCII             = 1; // = Z_TEXT
+var Z_UNKNOWN             = 2;
+
+/*============================================================================*/
+
+
+function zero(buf) { var len = buf.length; while (--len >= 0) { buf[len] = 0; } }
+
+// From zutil.h
+
+var STORED_BLOCK = 0;
+var STATIC_TREES = 1;
+var DYN_TREES    = 2;
+/* The three kinds of block type */
+
+var MIN_MATCH    = 3;
+var MAX_MATCH    = 258;
+/* The minimum and maximum match lengths */
+
+// From deflate.h
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+var LENGTH_CODES  = 29;
+/* number of length codes, not counting the special END_BLOCK code */
+
+var LITERALS      = 256;
+/* number of literal bytes 0..255 */
+
+var L_CODES       = LITERALS + 1 + LENGTH_CODES;
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+var D_CODES       = 30;
+/* number of distance codes */
+
+var BL_CODES      = 19;
+/* number of codes used to transfer the bit lengths */
+
+var HEAP_SIZE     = 2*L_CODES + 1;
+/* maximum heap size */
+
+var MAX_BITS      = 15;
+/* All codes must not exceed MAX_BITS bits */
+
+var Buf_size      = 16;
+/* size of bit buffer in bi_buf */
+
+
+/* ===========================================================================
+ * Constants
+ */
+
+var MAX_BL_BITS = 7;
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+var END_BLOCK   = 256;
+/* end of block literal code */
+
+var REP_3_6     = 16;
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+var REPZ_3_10   = 17;
+/* repeat a zero length 3-10 times  (3 bits of repeat count) */
+
+var REPZ_11_138 = 18;
+/* repeat a zero length 11-138 times  (7 bits of repeat count) */
+
+var extra_lbits =   /* extra bits for each length code */
+  [0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0];
+
+var extra_dbits =   /* extra bits for each distance code */
+  [0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13];
+
+var extra_blbits =  /* extra bits for each bit length code */
+  [0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7];
+
+var bl_order =
+  [16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15];
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+// We pre-fill arrays with 0 to avoid uninitialized gaps
+
+var DIST_CODE_LEN = 512; /* see definition of array dist_code below */
+
+// !!!! Use flat array insdead of structure, Freq = i*2, Len = i*2+1
+var static_ltree  = new Array((L_CODES+2) * 2);
+zero(static_ltree);
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+var static_dtree  = new Array(D_CODES * 2);
+zero(static_dtree);
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+var _dist_code    = new Array(DIST_CODE_LEN);
+zero(_dist_code);
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+var _length_code  = new Array(MAX_MATCH-MIN_MATCH+1);
+zero(_length_code);
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+var base_length   = new Array(LENGTH_CODES);
+zero(base_length);
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+var base_dist     = new Array(D_CODES);
+zero(base_dist);
+/* First normalized distance for each code (0 = distance of 1) */
+
+
+var StaticTreeDesc = function (static_tree, extra_bits, extra_base, elems, max_length) {
+
+  this.static_tree  = static_tree;  /* static tree or NULL */
+  this.extra_bits   = extra_bits;   /* extra bits for each code or NULL */
+  this.extra_base   = extra_base;   /* base index for extra_bits */
+  this.elems        = elems;        /* max number of elements in the tree */
+  this.max_length   = max_length;   /* max bit length for the codes */
+
+  // show if `static_tree` has data or dummy - needed for monomorphic objects
+  this.has_stree    = static_tree && static_tree.length;
+};
+
+
+var static_l_desc;
+var static_d_desc;
+var static_bl_desc;
+
+
+var TreeDesc = function(dyn_tree, stat_desc) {
+  this.dyn_tree = dyn_tree;     /* the dynamic tree */
+  this.max_code = 0;            /* largest code with non zero frequency */
+  this.stat_desc = stat_desc;   /* the corresponding static tree */
+};
+
+
+
+function d_code(dist) {
+  return dist < 256 ? _dist_code[dist] : _dist_code[256 + (dist >>> 7)];
+}
+
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+function put_short (s, w) {
+//    put_byte(s, (uch)((w) & 0xff));
+//    put_byte(s, (uch)((ush)(w) >> 8));
+  s.pending_buf[s.pending++] = (w) & 0xff;
+  s.pending_buf[s.pending++] = (w >>> 8) & 0xff;
+}
+
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+function send_bits(s, value, length) {
+  if (s.bi_valid > (Buf_size - length)) {
+    s.bi_buf |= (value << s.bi_valid) & 0xffff;
+    put_short(s, s.bi_buf);
+    s.bi_buf = value >> (Buf_size - s.bi_valid);
+    s.bi_valid += length - Buf_size;
+  } else {
+    s.bi_buf |= (value << s.bi_valid) & 0xffff;
+    s.bi_valid += length;
+  }
+}
+
+
+function send_code(s, c, tree) {
+  send_bits(s, tree[c*2]/*.Code*/, tree[c*2 + 1]/*.Len*/);
+}
+
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+function bi_reverse(code, len) {
+  var res = 0;
+  do {
+    res |= code & 1;
+    code >>>= 1;
+    res <<= 1;
+  } while (--len > 0);
+  return res >>> 1;
+}
+
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+function bi_flush(s) {
+  if (s.bi_valid === 16) {
+    put_short(s, s.bi_buf);
+    s.bi_buf = 0;
+    s.bi_valid = 0;
+
+  } else if (s.bi_valid >= 8) {
+    s.pending_buf[s.pending++] = s.bi_buf & 0xff;
+    s.bi_buf >>= 8;
+    s.bi_valid -= 8;
+  }
+}
+
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ *    above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ *     array bl_count contains the frequencies for each bit length.
+ *     The length opt_len is updated; static_len is also updated if stree is
+ *     not null.
+ */
+function gen_bitlen(s, desc)
+//    deflate_state *s;
+//    tree_desc *desc;    /* the tree descriptor */
+{
+  var tree            = desc.dyn_tree;
+  var max_code        = desc.max_code;
+  var stree           = desc.stat_desc.static_tree;
+  var has_stree       = desc.stat_desc.has_stree;
+  var extra           = desc.stat_desc.extra_bits;
+  var base            = desc.stat_desc.extra_base;
+  var max_length      = desc.stat_desc.max_length;
+  var h;              /* heap index */
+  var n, m;           /* iterate over the tree elements */
+  var bits;           /* bit length */
+  var xbits;          /* extra bits */
+  var f;              /* frequency */
+  var overflow = 0;   /* number of elements with bit length too large */
+
+  for (bits = 0; bits <= MAX_BITS; bits++) {
+    s.bl_count[bits] = 0;
+  }
+
+  /* In a first pass, compute the optimal bit lengths (which may
+   * overflow in the case of the bit length tree).
+   */
+  tree[s.heap[s.heap_max]*2 + 1]/*.Len*/ = 0; /* root of the heap */
+
+  for (h = s.heap_max+1; h < HEAP_SIZE; h++) {
+    n = s.heap[h];
+    bits = tree[tree[n*2 +1]/*.Dad*/ * 2 + 1]/*.Len*/ + 1;
+    if (bits > max_length) {
+      bits = max_length;
+      overflow++;
+    }
+    tree[n*2 + 1]/*.Len*/ = bits;
+    /* We overwrite tree[n].Dad which is no longer needed */
+
+    if (n > max_code) { continue; } /* not a leaf node */
+
+    s.bl_count[bits]++;
+    xbits = 0;
+    if (n >= base) {
+      xbits = extra[n-base];
+    }
+    f = tree[n * 2]/*.Freq*/;
+    s.opt_len += f * (bits + xbits);
+    if (has_stree) {
+      s.static_len += f * (stree[n*2 + 1]/*.Len*/ + xbits);
+    }
+  }
+  if (overflow === 0) { return; }
+
+  // Trace((stderr,"\nbit length overflow\n"));
+  /* This happens for example on obj2 and pic of the Calgary corpus */
+
+  /* Find the first bit length which could increase: */
+  do {
+    bits = max_length-1;
+    while (s.bl_count[bits] === 0) { bits--; }
+    s.bl_count[bits]--;      /* move one leaf down the tree */
+    s.bl_count[bits+1] += 2; /* move one overflow item as its brother */
+    s.bl_count[max_length]--;
+    /* The brother of the overflow item also moves one step up,
+     * but this does not affect bl_count[max_length]
+     */
+    overflow -= 2;
+  } while (overflow > 0);
+
+  /* Now recompute all bit lengths, scanning in increasing frequency.
+   * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+   * lengths instead of fixing only the wrong ones. This idea is taken
+   * from 'ar' written by Haruhiko Okumura.)
+   */
+  for (bits = max_length; bits !== 0; bits--) {
+    n = s.bl_count[bits];
+    while (n !== 0) {
+      m = s.heap[--h];
+      if (m > max_code) { continue; }
+      if (tree[m*2 + 1]/*.Len*/ !== bits) {
+        // Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+        s.opt_len += (bits - tree[m*2 + 1]/*.Len*/)*tree[m*2]/*.Freq*/;
+        tree[m*2 + 1]/*.Len*/ = bits;
+      }
+      n--;
+    }
+  }
+}
+
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ *     zero code length.
+ */
+function gen_codes(tree, max_code, bl_count)
+//    ct_data *tree;             /* the tree to decorate */
+//    int max_code;              /* largest code with non zero frequency */
+//    ushf *bl_count;            /* number of codes at each bit length */
+{
+  var next_code = new Array(MAX_BITS+1); /* next code value for each bit length */
+  var code = 0;              /* running code value */
+  var bits;                  /* bit index */
+  var n;                     /* code index */
+
+  /* The distribution counts are first used to generate the code values
+   * without bit reversal.
+   */
+  for (bits = 1; bits <= MAX_BITS; bits++) {
+    next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+  }
+  /* Check that the bit counts in bl_count are consistent. The last code
+   * must be all ones.
+   */
+  //Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+  //        "inconsistent bit counts");
+  //Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+  for (n = 0;  n <= max_code; n++) {
+    var len = tree[n*2 + 1]/*.Len*/;
+    if (len === 0) { continue; }
+    /* Now reverse the bits */
+    tree[n*2]/*.Code*/ = bi_reverse(next_code[len]++, len);
+
+    //Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+    //     n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+  }
+}
+
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+function tr_static_init() {
+  var n;        /* iterates over tree elements */
+  var bits;     /* bit counter */
+  var length;   /* length value */
+  var code;     /* code value */
+  var dist;     /* distance index */
+  var bl_count = new Array(MAX_BITS+1);
+  /* number of codes at each bit length for an optimal tree */
+
+  // do check in _tr_init()
+  //if (static_init_done) return;
+
+  /* For some embedded targets, global variables are not initialized: */
+/*#ifdef NO_INIT_GLOBAL_POINTERS
+  static_l_desc.static_tree = static_ltree;
+  static_l_desc.extra_bits = extra_lbits;
+  static_d_desc.static_tree = static_dtree;
+  static_d_desc.extra_bits = extra_dbits;
+  static_bl_desc.extra_bits = extra_blbits;
+#endif*/
+
+  /* Initialize the mapping length (0..255) -> length code (0..28) */
+  length = 0;
+  for (code = 0; code < LENGTH_CODES-1; code++) {
+    base_length[code] = length;
+    for (n = 0; n < (1<<extra_lbits[code]); n++) {
+      _length_code[length++] = code;
+    }
+  }
+  //Assert (length == 256, "tr_static_init: length != 256");
+  /* Note that the length 255 (match length 258) can be represented
+   * in two different ways: code 284 + 5 bits or code 285, so we
+   * overwrite length_code[255] to use the best encoding:
+   */
+  _length_code[length-1] = code;
+
+  /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+  dist = 0;
+  for (code = 0 ; code < 16; code++) {
+    base_dist[code] = dist;
+    for (n = 0; n < (1<<extra_dbits[code]); n++) {
+      _dist_code[dist++] = code;
+    }
+  }
+  //Assert (dist == 256, "tr_static_init: dist != 256");
+  dist >>= 7; /* from now on, all distances are divided by 128 */
+  for (; code < D_CODES; code++) {
+    base_dist[code] = dist << 7;
+    for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+      _dist_code[256 + dist++] = code;
+    }
+  }
+  //Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+  /* Construct the codes of the static literal tree */
+  for (bits = 0; bits <= MAX_BITS; bits++) {
+    bl_count[bits] = 0;
+  }
+
+  n = 0;
+  while (n <= 143) {
+    static_ltree[n*2 + 1]/*.Len*/ = 8;
+    n++;
+    bl_count[8]++;
+  }
+  while (n <= 255) {
+    static_ltree[n*2 + 1]/*.Len*/ = 9;
+    n++;
+    bl_count[9]++;
+  }
+  while (n <= 279) {
+    static_ltree[n*2 + 1]/*.Len*/ = 7;
+    n++;
+    bl_count[7]++;
+  }
+  while (n <= 287) {
+    static_ltree[n*2 + 1]/*.Len*/ = 8;
+    n++;
+    bl_count[8]++;
+  }
+  /* Codes 286 and 287 do not exist, but we must include them in the
+   * tree construction to get a canonical Huffman tree (longest code
+   * all ones)
+   */
+  gen_codes(static_ltree, L_CODES+1, bl_count);
+
+  /* The static distance tree is trivial: */
+  for (n = 0; n < D_CODES; n++) {
+    static_dtree[n*2 + 1]/*.Len*/ = 5;
+    static_dtree[n*2]/*.Code*/ = bi_reverse(n, 5);
+  }
+
+  // Now data ready and we can init static trees
+  static_l_desc = new StaticTreeDesc(static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS);
+  static_d_desc = new StaticTreeDesc(static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS);
+  static_bl_desc =new StaticTreeDesc(new Array(0), extra_blbits, 0,         BL_CODES, MAX_BL_BITS);
+
+  //static_init_done = true;
+}
+
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+function init_block(s) {
+  var n; /* iterates over tree elements */
+
+  /* Initialize the trees. */
+  for (n = 0; n < L_CODES;  n++) { s.dyn_ltree[n*2]/*.Freq*/ = 0; }
+  for (n = 0; n < D_CODES;  n++) { s.dyn_dtree[n*2]/*.Freq*/ = 0; }
+  for (n = 0; n < BL_CODES; n++) { s.bl_tree[n*2]/*.Freq*/ = 0; }
+
+  s.dyn_ltree[END_BLOCK*2]/*.Freq*/ = 1;
+  s.opt_len = s.static_len = 0;
+  s.last_lit = s.matches = 0;
+}
+
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+function bi_windup(s)
+{
+  if (s.bi_valid > 8) {
+    put_short(s, s.bi_buf);
+  } else if (s.bi_valid > 0) {
+    //put_byte(s, (Byte)s->bi_buf);
+    s.pending_buf[s.pending++] = s.bi_buf;
+  }
+  s.bi_buf = 0;
+  s.bi_valid = 0;
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+function copy_block(s, buf, len, header)
+//DeflateState *s;
+//charf    *buf;    /* the input data */
+//unsigned len;     /* its length */
+//int      header;  /* true if block header must be written */
+{
+  bi_windup(s);        /* align on byte boundary */
+
+  if (header) {
+    put_short(s, len);
+    put_short(s, ~len);
+  }
+//  while (len--) {
+//    put_byte(s, *buf++);
+//  }
+  utils.arraySet(s.pending_buf, s.window, buf, len, s.pending);
+  s.pending += len;
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+function smaller(tree, n, m, depth) {
+  var _n2 = n*2;
+  var _m2 = m*2;
+  return (tree[_n2]/*.Freq*/ < tree[_m2]/*.Freq*/ ||
+         (tree[_n2]/*.Freq*/ === tree[_m2]/*.Freq*/ && depth[n] <= depth[m]));
+}
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+function pqdownheap(s, tree, k)
+//    deflate_state *s;
+//    ct_data *tree;  /* the tree to restore */
+//    int k;               /* node to move down */
+{
+  var v = s.heap[k];
+  var j = k << 1;  /* left son of k */
+  while (j <= s.heap_len) {
+    /* Set j to the smallest of the two sons: */
+    if (j < s.heap_len &&
+      smaller(tree, s.heap[j+1], s.heap[j], s.depth)) {
+      j++;
+    }
+    /* Exit if v is smaller than both sons */
+    if (smaller(tree, v, s.heap[j], s.depth)) { break; }
+
+    /* Exchange v with the smallest son */
+    s.heap[k] = s.heap[j];
+    k = j;
+
+    /* And continue down the tree, setting j to the left son of k */
+    j <<= 1;
+  }
+  s.heap[k] = v;
+}
+
+
+// inlined manually
+// var SMALLEST = 1;
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+function compress_block(s, ltree, dtree)
+//    deflate_state *s;
+//    const ct_data *ltree; /* literal tree */
+//    const ct_data *dtree; /* distance tree */
+{
+  var dist;           /* distance of matched string */
+  var lc;             /* match length or unmatched char (if dist == 0) */
+  var lx = 0;         /* running index in l_buf */
+  var code;           /* the code to send */
+  var extra;          /* number of extra bits to send */
+
+  if (s.last_lit !== 0) {
+    do {
+      dist = (s.pending_buf[s.d_buf + lx*2] << 8) | (s.pending_buf[s.d_buf + lx*2 + 1]);
+      lc = s.pending_buf[s.l_buf + lx];
+      lx++;
+
+      if (dist === 0) {
+        send_code(s, lc, ltree); /* send a literal byte */
+        //Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+      } else {
+        /* Here, lc is the match length - MIN_MATCH */
+        code = _length_code[lc];
+        send_code(s, code+LITERALS+1, ltree); /* send the length code */
+        extra = extra_lbits[code];
+        if (extra !== 0) {
+          lc -= base_length[code];
+          send_bits(s, lc, extra);       /* send the extra length bits */
+        }
+        dist--; /* dist is now the match distance - 1 */
+        code = d_code(dist);
+        //Assert (code < D_CODES, "bad d_code");
+
+        send_code(s, code, dtree);       /* send the distance code */
+        extra = extra_dbits[code];
+        if (extra !== 0) {
+          dist -= base_dist[code];
+          send_bits(s, dist, extra);   /* send the extra distance bits */
+        }
+      } /* literal or match pair ? */
+
+      /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+      //Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
+      //       "pendingBuf overflow");
+
+    } while (lx < s.last_lit);
+  }
+
+  send_code(s, END_BLOCK, ltree);
+}
+
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ *     and corresponding code. The length opt_len is updated; static_len is
+ *     also updated if stree is not null. The field max_code is set.
+ */
+function build_tree(s, desc)
+//    deflate_state *s;
+//    tree_desc *desc; /* the tree descriptor */
+{
+  var tree     = desc.dyn_tree;
+  var stree    = desc.stat_desc.static_tree;
+  var has_stree = desc.stat_desc.has_stree;
+  var elems    = desc.stat_desc.elems;
+  var n, m;          /* iterate over heap elements */
+  var max_code = -1; /* largest code with non zero frequency */
+  var node;          /* new node being created */
+
+  /* Construct the initial heap, with least frequent element in
+   * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+   * heap[0] is not used.
+   */
+  s.heap_len = 0;
+  s.heap_max = HEAP_SIZE;
+
+  for (n = 0; n < elems; n++) {
+    if (tree[n * 2]/*.Freq*/ !== 0) {
+      s.heap[++s.heap_len] = max_code = n;
+      s.depth[n] = 0;
+
+    } else {
+      tree[n*2 + 1]/*.Len*/ = 0;
+    }
+  }
+
+  /* The pkzip format requires that at least one distance code exists,
+   * and that at least one bit should be sent even if there is only one
+   * possible code. So to avoid special checks later on we force at least
+   * two codes of non zero frequency.
+   */
+  while (s.heap_len < 2) {
+    node = s.heap[++s.heap_len] = (max_code < 2 ? ++max_code : 0);
+    tree[node * 2]/*.Freq*/ = 1;
+    s.depth[node] = 0;
+    s.opt_len--;
+
+    if (has_stree) {
+      s.static_len -= stree[node*2 + 1]/*.Len*/;
+    }
+    /* node is 0 or 1 so it does not have extra bits */
+  }
+  desc.max_code = max_code;
+
+  /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+   * establish sub-heaps of increasing lengths:
+   */
+  for (n = (s.heap_len >> 1/*int /2*/); n >= 1; n--) { pqdownheap(s, tree, n); }
+
+  /* Construct the Huffman tree by repeatedly combining the least two
+   * frequent nodes.
+   */
+  node = elems;              /* next internal node of the tree */
+  do {
+    //pqremove(s, tree, n);  /* n = node of least frequency */
+    /*** pqremove ***/
+    n = s.heap[1/*SMALLEST*/];
+    s.heap[1/*SMALLEST*/] = s.heap[s.heap_len--];
+    pqdownheap(s, tree, 1/*SMALLEST*/);
+    /***/
+
+    m = s.heap[1/*SMALLEST*/]; /* m = node of next least frequency */
+
+    s.heap[--s.heap_max] = n; /* keep the nodes sorted by frequency */
+    s.heap[--s.heap_max] = m;
+
+    /* Create a new node father of n and m */
+    tree[node * 2]/*.Freq*/ = tree[n * 2]/*.Freq*/ + tree[m * 2]/*.Freq*/;
+    s.depth[node] = (s.depth[n] >= s.depth[m] ? s.depth[n] : s.depth[m]) + 1;
+    tree[n*2 + 1]/*.Dad*/ = tree[m*2 + 1]/*.Dad*/ = node;
+
+    /* and insert the new node in the heap */
+    s.heap[1/*SMALLEST*/] = node++;
+    pqdownheap(s, tree, 1/*SMALLEST*/);
+
+  } while (s.heap_len >= 2);
+
+  s.heap[--s.heap_max] = s.heap[1/*SMALLEST*/];
+
+  /* At this point, the fields freq and dad are set. We can now
+   * generate the bit lengths.
+   */
+  gen_bitlen(s, desc);
+
+  /* The field len is now set, we can generate the bit codes */
+  gen_codes(tree, max_code, s.bl_count);
+}
+
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+function scan_tree(s, tree, max_code)
+//    deflate_state *s;
+//    ct_data *tree;   /* the tree to be scanned */
+//    int max_code;    /* and its largest code of non zero frequency */
+{
+  var n;                     /* iterates over all tree elements */
+  var prevlen = -1;          /* last emitted length */
+  var curlen;                /* length of current code */
+
+  var nextlen = tree[0*2 + 1]/*.Len*/; /* length of next code */
+
+  var count = 0;             /* repeat count of the current code */
+  var max_count = 7;         /* max repeat count */
+  var min_count = 4;         /* min repeat count */
+
+  if (nextlen === 0) {
+    max_count = 138;
+    min_count = 3;
+  }
+  tree[(max_code+1)*2 + 1]/*.Len*/ = 0xffff; /* guard */
+
+  for (n = 0; n <= max_code; n++) {
+    curlen = nextlen;
+    nextlen = tree[(n+1)*2 + 1]/*.Len*/;
+
+    if (++count < max_count && curlen === nextlen) {
+      continue;
+
+    } else if (count < min_count) {
+      s.bl_tree[curlen * 2]/*.Freq*/ += count;
+
+    } else if (curlen !== 0) {
+
+      if (curlen !== prevlen) { s.bl_tree[curlen * 2]/*.Freq*/++; }
+      s.bl_tree[REP_3_6*2]/*.Freq*/++;
+
+    } else if (count <= 10) {
+      s.bl_tree[REPZ_3_10*2]/*.Freq*/++;
+
+    } else {
+      s.bl_tree[REPZ_11_138*2]/*.Freq*/++;
+    }
+
+    count = 0;
+    prevlen = curlen;
+
+    if (nextlen === 0) {
+      max_count = 138;
+      min_count = 3;
+
+    } else if (curlen === nextlen) {
+      max_count = 6;
+      min_count = 3;
+
+    } else {
+      max_count = 7;
+      min_count = 4;
+    }
+  }
+}
+
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+function send_tree(s, tree, max_code)
+//    deflate_state *s;
+//    ct_data *tree; /* the tree to be scanned */
+//    int max_code;       /* and its largest code of non zero frequency */
+{
+  var n;                     /* iterates over all tree elements */
+  var prevlen = -1;          /* last emitted length */
+  var curlen;                /* length of current code */
+
+  var nextlen = tree[0*2 + 1]/*.Len*/; /* length of next code */
+
+  var count = 0;             /* repeat count of the current code */
+  var max_count = 7;         /* max repeat count */
+  var min_count = 4;         /* min repeat count */
+
+  /* tree[max_code+1].Len = -1; */  /* guard already set */
+  if (nextlen === 0) {
+    max_count = 138;
+    min_count = 3;
+  }
+
+  for (n = 0; n <= max_code; n++) {
+    curlen = nextlen;
+    nextlen = tree[(n+1)*2 + 1]/*.Len*/;
+
+    if (++count < max_count && curlen === nextlen) {
+      continue;
+
+    } else if (count < min_count) {
+      do { send_code(s, curlen, s.bl_tree); } while (--count !== 0);
+
+    } else if (curlen !== 0) {
+      if (curlen !== prevlen) {
+        send_code(s, curlen, s.bl_tree);
+        count--;
+      }
+      //Assert(count >= 3 && count <= 6, " 3_6?");
+      send_code(s, REP_3_6, s.bl_tree);
+      send_bits(s, count-3, 2);
+
+    } else if (count <= 10) {
+      send_code(s, REPZ_3_10, s.bl_tree);
+      send_bits(s, count-3, 3);
+
+    } else {
+      send_code(s, REPZ_11_138, s.bl_tree);
+      send_bits(s, count-11, 7);
+    }
+
+    count = 0;
+    prevlen = curlen;
+    if (nextlen === 0) {
+      max_count = 138;
+      min_count = 3;
+
+    } else if (curlen === nextlen) {
+      max_count = 6;
+      min_count = 3;
+
+    } else {
+      max_count = 7;
+      min_count = 4;
+    }
+  }
+}
+
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+function build_bl_tree(s) {
+  var max_blindex;  /* index of last bit length code of non zero freq */
+
+  /* Determine the bit length frequencies for literal and distance trees */
+  scan_tree(s, s.dyn_ltree, s.l_desc.max_code);
+  scan_tree(s, s.dyn_dtree, s.d_desc.max_code);
+
+  /* Build the bit length tree: */
+  build_tree(s, s.bl_desc);
+  /* opt_len now includes the length of the tree representations, except
+   * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+   */
+
+  /* Determine the number of bit length codes to send. The pkzip format
+   * requires that at least 4 bit length codes be sent. (appnote.txt says
+   * 3 but the actual value used is 4.)
+   */
+  for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+    if (s.bl_tree[bl_order[max_blindex]*2 + 1]/*.Len*/ !== 0) {
+      break;
+    }
+  }
+  /* Update opt_len to include the bit length tree and counts */
+  s.opt_len += 3*(max_blindex+1) + 5+5+4;
+  //Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+  //        s->opt_len, s->static_len));
+
+  return max_blindex;
+}
+
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+function send_all_trees(s, lcodes, dcodes, blcodes)
+//    deflate_state *s;
+//    int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+  var rank;                    /* index in bl_order */
+
+  //Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+  //Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+  //        "too many codes");
+  //Tracev((stderr, "\nbl counts: "));
+  send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+  send_bits(s, dcodes-1,   5);
+  send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
+  for (rank = 0; rank < blcodes; rank++) {
+    //Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+    send_bits(s, s.bl_tree[bl_order[rank]*2 + 1]/*.Len*/, 3);
+  }
+  //Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+  send_tree(s, s.dyn_ltree, lcodes-1); /* literal tree */
+  //Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+  send_tree(s, s.dyn_dtree, dcodes-1); /* distance tree */
+  //Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+
+/* ===========================================================================
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ *    a) There are no non-portable control characters belonging to the
+ *       "black list" (0..6, 14..25, 28..31).
+ *    b) There is at least one printable character belonging to the
+ *       "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ *   "gray list" that is ignored in this detection algorithm:
+ *   (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
+ */
+function detect_data_type(s) {
+  /* black_mask is the bit mask of black-listed bytes
+   * set bits 0..6, 14..25, and 28..31
+   * 0xf3ffc07f = binary 11110011111111111100000001111111
+   */
+  var black_mask = 0xf3ffc07f;
+  var n;
+
+  /* Check for non-textual ("black-listed") bytes. */
+  for (n = 0; n <= 31; n++, black_mask >>>= 1) {
+    if ((black_mask & 1) && (s.dyn_ltree[n*2]/*.Freq*/ !== 0)) {
+      return Z_BINARY;
+    }
+  }
+
+  /* Check for textual ("white-listed") bytes. */
+  if (s.dyn_ltree[9 * 2]/*.Freq*/ !== 0 || s.dyn_ltree[10 * 2]/*.Freq*/ !== 0 ||
+      s.dyn_ltree[13 * 2]/*.Freq*/ !== 0) {
+    return Z_TEXT;
+  }
+  for (n = 32; n < LITERALS; n++) {
+    if (s.dyn_ltree[n * 2]/*.Freq*/ !== 0) {
+      return Z_TEXT;
+    }
+  }
+
+  /* There are no "black-listed" or "white-listed" bytes:
+   * this stream either is empty or has tolerated ("gray-listed") bytes only.
+   */
+  return Z_BINARY;
+}
+
+
+var static_init_done = false;
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+function _tr_init(s)
+{
+
+  if (!static_init_done) {
+    tr_static_init();
+    static_init_done = true;
+  }
+
+  s.l_desc  = new TreeDesc(s.dyn_ltree, static_l_desc);
+  s.d_desc  = new TreeDesc(s.dyn_dtree, static_d_desc);
+  s.bl_desc = new TreeDesc(s.bl_tree, static_bl_desc);
+
+  s.bi_buf = 0;
+  s.bi_valid = 0;
+
+  /* Initialize the first block of the first file: */
+  init_block(s);
+}
+
+
+/* ===========================================================================
+ * Send a stored block
+ */
+function _tr_stored_block(s, buf, stored_len, last)
+//DeflateState *s;
+//charf *buf;       /* input block */
+//ulg stored_len;   /* length of input block */
+//int last;         /* one if this is the last block for a file */
+{
+  send_bits(s, (STORED_BLOCK<<1)+(last ? 1 : 0), 3);    /* send block type */
+  copy_block(s, buf, stored_len, true); /* with header */
+}
+
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ */
+function _tr_align(s) {
+  send_bits(s, STATIC_TREES<<1, 3);
+  send_code(s, END_BLOCK, static_ltree);
+  bi_flush(s);
+}
+
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+function _tr_flush_block(s, buf, stored_len, last)
+//DeflateState *s;
+//charf *buf;       /* input block, or NULL if too old */
+//ulg stored_len;   /* length of input block */
+//int last;         /* one if this is the last block for a file */
+{
+  var opt_lenb, static_lenb;  /* opt_len and static_len in bytes */
+  var max_blindex = 0;        /* index of last bit length code of non zero freq */
+
+  /* Build the Huffman trees unless a stored block is forced */
+  if (s.level > 0) {
+
+    /* Check if the file is binary or text */
+    if (s.strm.data_type === Z_UNKNOWN) {
+      s.strm.data_type = detect_data_type(s);
+    }
+
+    /* Construct the literal and distance trees */
+    build_tree(s, s.l_desc);
+    // Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+    //        s->static_len));
+
+    build_tree(s, s.d_desc);
+    // Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+    //        s->static_len));
+    /* At this point, opt_len and static_len are the total bit lengths of
+     * the compressed block data, excluding the tree representations.
+     */
+
+    /* Build the bit length tree for the above two trees, and get the index
+     * in bl_order of the last bit length code to send.
+     */
+    max_blindex = build_bl_tree(s);
+
+    /* Determine the best encoding. Compute the block lengths in bytes. */
+    opt_lenb = (s.opt_len+3+7) >>> 3;
+    static_lenb = (s.static_len+3+7) >>> 3;
+
+    // Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+    //        opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+    //        s->last_lit));
+
+    if (static_lenb <= opt_lenb) { opt_lenb = static_lenb; }
+
+  } else {
+    // Assert(buf != (char*)0, "lost buf");
+    opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+  }
+
+  if ((stored_len+4 <= opt_lenb) && (buf !== -1)) {
+    /* 4: two words for the lengths */
+
+    /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+     * Otherwise we can't have processed more than WSIZE input bytes since
+     * the last block flush, because compression would have been
+     * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+     * transform a block into a stored block.
+     */
+    _tr_stored_block(s, buf, stored_len, last);
+
+  } else if (s.strategy === Z_FIXED || static_lenb === opt_lenb) {
+
+    send_bits(s, (STATIC_TREES<<1) + (last ? 1 : 0), 3);
+    compress_block(s, static_ltree, static_dtree);
+
+  } else {
+    send_bits(s, (DYN_TREES<<1) + (last ? 1 : 0), 3);
+    send_all_trees(s, s.l_desc.max_code+1, s.d_desc.max_code+1, max_blindex+1);
+    compress_block(s, s.dyn_ltree, s.dyn_dtree);
+  }
+  // Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+  /* The above check is made mod 2^32, for files larger than 512 MB
+   * and uLong implemented on 32 bits.
+   */
+  init_block(s);
+
+  if (last) {
+    bi_windup(s);
+  }
+  // Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+  //       s->compressed_len-7*last));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+function _tr_tally(s, dist, lc)
+//    deflate_state *s;
+//    unsigned dist;  /* distance of matched string */
+//    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+  //var out_length, in_length, dcode;
+
+  s.pending_buf[s.d_buf + s.last_lit * 2]     = (dist >>> 8) & 0xff;
+  s.pending_buf[s.d_buf + s.last_lit * 2 + 1] = dist & 0xff;
+
+  s.pending_buf[s.l_buf + s.last_lit] = lc & 0xff;
+  s.last_lit++;
+
+  if (dist === 0) {
+    /* lc is the unmatched char */
+    s.dyn_ltree[lc*2]/*.Freq*/++;
+  } else {
+    s.matches++;
+    /* Here, lc is the match length - MIN_MATCH */
+    dist--;             /* dist = match distance - 1 */
+    //Assert((ush)dist < (ush)MAX_DIST(s) &&
+    //       (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+    //       (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
+
+    s.dyn_ltree[(_length_code[lc]+LITERALS+1) * 2]/*.Freq*/++;
+    s.dyn_dtree[d_code(dist) * 2]/*.Freq*/++;
+  }
+
+// (!) This block is disabled in zlib defailts,
+// don't enable it for binary compatibility
+
+//#ifdef TRUNCATE_BLOCK
+//  /* Try to guess if it is profitable to stop the current block here */
+//  if ((s.last_lit & 0x1fff) === 0 && s.level > 2) {
+//    /* Compute an upper bound for the compressed length */
+//    out_length = s.last_lit*8;
+//    in_length = s.strstart - s.block_start;
+//
+//    for (dcode = 0; dcode < D_CODES; dcode++) {
+//      out_length += s.dyn_dtree[dcode*2]/*.Freq*/ * (5 + extra_dbits[dcode]);
+//    }
+//    out_length >>>= 3;
+//    //Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+//    //       s->last_lit, in_length, out_length,
+//    //       100L - out_length*100L/in_length));
+//    if (s.matches < (s.last_lit>>1)/*int /2*/ && out_length < (in_length>>1)/*int /2*/) {
+//      return true;
+//    }
+//  }
+//#endif
+
+  return (s.last_lit === s.lit_bufsize-1);
+  /* We avoid equality with lit_bufsize because of wraparound at 64K
+   * on 16 bit machines and because stored blocks are restricted to
+   * 64K-1 bytes.
+   */
+}
+
+exports._tr_init  = _tr_init;
+exports._tr_stored_block = _tr_stored_block;
+exports._tr_flush_block  = _tr_flush_block;
+exports._tr_tally = _tr_tally;
+exports._tr_align = _tr_align;