brwy_rails 0.0.1

data/test/dummy/node_modules/pako/lib/zlib/deflate.js

@@ -0,0 +1,1765 @@
+'use strict';
+
+var utils   = require('../utils/common');
+var trees   = require('./trees');
+var adler32 = require('./adler32');
+var crc32   = require('./crc32');
+var msg   = require('./messages');
+
+/* Public constants ==========================================================*/
+/* ===========================================================================*/
+
+
+/* Allowed flush values; see deflate() and inflate() below for details */
+var Z_NO_FLUSH      = 0;
+var Z_PARTIAL_FLUSH = 1;
+//var Z_SYNC_FLUSH    = 2;
+var Z_FULL_FLUSH    = 3;
+var Z_FINISH        = 4;
+var Z_BLOCK         = 5;
+//var Z_TREES         = 6;
+
+
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+var Z_OK            = 0;
+var Z_STREAM_END    = 1;
+//var Z_NEED_DICT     = 2;
+//var Z_ERRNO         = -1;
+var Z_STREAM_ERROR  = -2;
+var Z_DATA_ERROR    = -3;
+//var Z_MEM_ERROR     = -4;
+var Z_BUF_ERROR     = -5;
+//var Z_VERSION_ERROR = -6;
+
+
+/* compression levels */
+//var Z_NO_COMPRESSION      = 0;
+//var Z_BEST_SPEED          = 1;
+//var Z_BEST_COMPRESSION    = 9;
+var Z_DEFAULT_COMPRESSION = -1;
+
+
+var Z_FILTERED            = 1;
+var Z_HUFFMAN_ONLY        = 2;
+var Z_RLE                 = 3;
+var Z_FIXED               = 4;
+var Z_DEFAULT_STRATEGY    = 0;
+
+/* Possible values of the data_type field (though see inflate()) */
+//var Z_BINARY              = 0;
+//var Z_TEXT                = 1;
+//var Z_ASCII               = 1; // = Z_TEXT
+var Z_UNKNOWN             = 2;
+
+
+/* The deflate compression method */
+var Z_DEFLATED  = 8;
+
+/*============================================================================*/
+
+
+var MAX_MEM_LEVEL = 9;
+/* Maximum value for memLevel in deflateInit2 */
+var MAX_WBITS = 15;
+/* 32K LZ77 window */
+var DEF_MEM_LEVEL = 8;
+
+
+var LENGTH_CODES  = 29;
+/* number of length codes, not counting the special END_BLOCK code */
+var LITERALS      = 256;
+/* number of literal bytes 0..255 */
+var L_CODES       = LITERALS + 1 + LENGTH_CODES;
+/* number of Literal or Length codes, including the END_BLOCK code */
+var D_CODES       = 30;
+/* number of distance codes */
+var BL_CODES      = 19;
+/* number of codes used to transfer the bit lengths */
+var HEAP_SIZE     = 2*L_CODES + 1;
+/* maximum heap size */
+var MAX_BITS  = 15;
+/* All codes must not exceed MAX_BITS bits */
+
+var MIN_MATCH = 3;
+var MAX_MATCH = 258;
+var MIN_LOOKAHEAD = (MAX_MATCH + MIN_MATCH + 1);
+
+var PRESET_DICT = 0x20;
+
+var INIT_STATE = 42;
+var EXTRA_STATE = 69;
+var NAME_STATE = 73;
+var COMMENT_STATE = 91;
+var HCRC_STATE = 103;
+var BUSY_STATE = 113;
+var FINISH_STATE = 666;
+
+var BS_NEED_MORE      = 1; /* block not completed, need more input or more output */
+var BS_BLOCK_DONE     = 2; /* block flush performed */
+var BS_FINISH_STARTED = 3; /* finish started, need only more output at next deflate */
+var BS_FINISH_DONE    = 4; /* finish done, accept no more input or output */
+
+var OS_CODE = 0x03; // Unix :) . Don't detect, use this default.
+
+function err(strm, errorCode) {
+  strm.msg = msg[errorCode];
+  return errorCode;
+}
+
+function rank(f) {
+  return ((f) << 1) - ((f) > 4 ? 9 : 0);
+}
+
+function zero(buf) { var len = buf.length; while (--len >= 0) { buf[len] = 0; } }
+
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->output buffer and copying into it.
+ * (See also read_buf()).
+ */
+function flush_pending(strm) {
+  var s = strm.state;
+
+  //_tr_flush_bits(s);
+  var len = s.pending;
+  if (len > strm.avail_out) {
+    len = strm.avail_out;
+  }
+  if (len === 0) { return; }
+
+  utils.arraySet(strm.output, s.pending_buf, s.pending_out, len, strm.next_out);
+  strm.next_out += len;
+  s.pending_out += len;
+  strm.total_out += len;
+  strm.avail_out -= len;
+  s.pending -= len;
+  if (s.pending === 0) {
+    s.pending_out = 0;
+  }
+}
+
+
+function flush_block_only (s, last) {
+  trees._tr_flush_block(s, (s.block_start >= 0 ? s.block_start : -1), s.strstart - s.block_start, last);
+  s.block_start = s.strstart;
+  flush_pending(s.strm);
+}
+
+
+function put_byte(s, b) {
+  s.pending_buf[s.pending++] = b;
+}
+
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+function putShortMSB(s, b) {
+//  put_byte(s, (Byte)(b >> 8));
+//  put_byte(s, (Byte)(b & 0xff));
+  s.pending_buf[s.pending++] = (b >>> 8) & 0xff;
+  s.pending_buf[s.pending++] = b & 0xff;
+}
+
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read.  All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->input buffer and copying from it.
+ * (See also flush_pending()).
+ */
+function read_buf(strm, buf, start, size) {
+  var len = strm.avail_in;
+
+  if (len > size) { len = size; }
+  if (len === 0) { return 0; }
+
+  strm.avail_in -= len;
+
+  utils.arraySet(buf, strm.input, strm.next_in, len, start);
+  if (strm.state.wrap === 1) {
+    strm.adler = adler32(strm.adler, buf, len, start);
+  }
+
+  else if (strm.state.wrap === 2) {
+    strm.adler = crc32(strm.adler, buf, len, start);
+  }
+
+  strm.next_in += len;
+  strm.total_in += len;
+
+  return len;
+}
+
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+function longest_match(s, cur_match) {
+  var chain_length = s.max_chain_length;      /* max hash chain length */
+  var scan = s.strstart; /* current string */
+  var match;                       /* matched string */
+  var len;                           /* length of current match */
+  var best_len = s.prev_length;              /* best match length so far */
+  var nice_match = s.nice_match;             /* stop if match long enough */
+  var limit = (s.strstart > (s.w_size - MIN_LOOKAHEAD)) ?
+      s.strstart - (s.w_size - MIN_LOOKAHEAD) : 0/*NIL*/;
+
+  var _win = s.window; // shortcut
+
+  var wmask = s.w_mask;
+  var prev  = s.prev;
+
+  /* Stop when cur_match becomes <= limit. To simplify the code,
+   * we prevent matches with the string of window index 0.
+   */
+
+  var strend = s.strstart + MAX_MATCH;
+  var scan_end1  = _win[scan + best_len - 1];
+  var scan_end   = _win[scan + best_len];
+
+  /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+   * It is easy to get rid of this optimization if necessary.
+   */
+  // Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+  /* Do not waste too much time if we already have a good match: */
+  if (s.prev_length >= s.good_match) {
+    chain_length >>= 2;
+  }
+  /* Do not look for matches beyond the end of the input. This is necessary
+   * to make deflate deterministic.
+   */
+  if (nice_match > s.lookahead) { nice_match = s.lookahead; }
+
+  // Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+  do {
+    // Assert(cur_match < s->strstart, "no future");
+    match = cur_match;
+
+    /* Skip to next match if the match length cannot increase
+     * or if the match length is less than 2.  Note that the checks below
+     * for insufficient lookahead only occur occasionally for performance
+     * reasons.  Therefore uninitialized memory will be accessed, and
+     * conditional jumps will be made that depend on those values.
+     * However the length of the match is limited to the lookahead, so
+     * the output of deflate is not affected by the uninitialized values.
+     */
+
+    if (_win[match + best_len]     !== scan_end  ||
+        _win[match + best_len - 1] !== scan_end1 ||
+        _win[match]                !== _win[scan] ||
+        _win[++match]              !== _win[scan + 1]) {
+      continue;
+    }
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2;
+    match++;
+    // Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+      /*jshint noempty:false*/
+    } while (_win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
+             _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
+             _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
+             _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
+             scan < strend);
+
+    // Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (strend - scan);
+    scan = strend - MAX_MATCH;
+
+    if (len > best_len) {
+      s.match_start = cur_match;
+      best_len = len;
+      if (len >= nice_match) {
+        break;
+      }
+      scan_end1  = _win[scan + best_len - 1];
+      scan_end   = _win[scan + best_len];
+    }
+  } while ((cur_match = prev[cur_match & wmask]) > limit && --chain_length !== 0);
+
+  if (best_len <= s.lookahead) {
+    return best_len;
+  }
+  return s.lookahead;
+}
+
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ *    At least one byte has been read, or avail_in == 0; reads are
+ *    performed for at least two bytes (required for the zip translate_eol
+ *    option -- not supported here).
+ */
+function fill_window(s) {
+  var _w_size = s.w_size;
+  var p, n, m, more, str;
+
+  //Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
+  do {
+    more = s.window_size - s.lookahead - s.strstart;
+
+    // JS ints have 32 bit, block below not needed
+    /* Deal with !@#$% 64K limit: */
+    //if (sizeof(int) <= 2) {
+    //    if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+    //        more = wsize;
+    //
+    //  } else if (more == (unsigned)(-1)) {
+    //        /* Very unlikely, but possible on 16 bit machine if
+    //         * strstart == 0 && lookahead == 1 (input done a byte at time)
+    //         */
+    //        more--;
+    //    }
+    //}
+
+
+    /* If the window is almost full and there is insufficient lookahead,
+     * move the upper half to the lower one to make room in the upper half.
+     */
+    if (s.strstart >= _w_size + (_w_size - MIN_LOOKAHEAD)) {
+
+      utils.arraySet(s.window, s.window, _w_size, _w_size, 0);
+      s.match_start -= _w_size;
+      s.strstart -= _w_size;
+      /* we now have strstart >= MAX_DIST */
+      s.block_start -= _w_size;
+
+      /* Slide the hash table (could be avoided with 32 bit values
+       at the expense of memory usage). We slide even when level == 0
+       to keep the hash table consistent if we switch back to level > 0
+       later. (Using level 0 permanently is not an optimal usage of
+       zlib, so we don't care about this pathological case.)
+       */
+
+      n = s.hash_size;
+      p = n;
+      do {
+        m = s.head[--p];
+        s.head[p] = (m >= _w_size ? m - _w_size : 0);
+      } while (--n);
+
+      n = _w_size;
+      p = n;
+      do {
+        m = s.prev[--p];
+        s.prev[p] = (m >= _w_size ? m - _w_size : 0);
+        /* If n is not on any hash chain, prev[n] is garbage but
+         * its value will never be used.
+         */
+      } while (--n);
+
+      more += _w_size;
+    }
+    if (s.strm.avail_in === 0) {
+      break;
+    }
+
+    /* If there was no sliding:
+     *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+     *    more == window_size - lookahead - strstart
+     * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+     * => more >= window_size - 2*WSIZE + 2
+     * In the BIG_MEM or MMAP case (not yet supported),
+     *   window_size == input_size + MIN_LOOKAHEAD  &&
+     *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+     * Otherwise, window_size == 2*WSIZE so more >= 2.
+     * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+     */
+    //Assert(more >= 2, "more < 2");
+    n = read_buf(s.strm, s.window, s.strstart + s.lookahead, more);
+    s.lookahead += n;
+
+    /* Initialize the hash value now that we have some input: */
+    if (s.lookahead + s.insert >= MIN_MATCH) {
+      str = s.strstart - s.insert;
+      s.ins_h = s.window[str];
+
+      /* UPDATE_HASH(s, s->ins_h, s->window[str + 1]); */
+      s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[str + 1]) & s.hash_mask;
+//#if MIN_MATCH != 3
+//        Call update_hash() MIN_MATCH-3 more times
+//#endif
+      while (s.insert) {
+        /* UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); */
+        s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[str + MIN_MATCH-1]) & s.hash_mask;
+
+        s.prev[str & s.w_mask] = s.head[s.ins_h];
+        s.head[s.ins_h] = str;
+        str++;
+        s.insert--;
+        if (s.lookahead + s.insert < MIN_MATCH) {
+          break;
+        }
+      }
+    }
+    /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+     * but this is not important since only literal bytes will be emitted.
+     */
+
+  } while (s.lookahead < MIN_LOOKAHEAD && s.strm.avail_in !== 0);
+
+  /* If the WIN_INIT bytes after the end of the current data have never been
+   * written, then zero those bytes in order to avoid memory check reports of
+   * the use of uninitialized (or uninitialised as Julian writes) bytes by
+   * the longest match routines.  Update the high water mark for the next
+   * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
+   * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+   */
+//  if (s.high_water < s.window_size) {
+//    var curr = s.strstart + s.lookahead;
+//    var init = 0;
+//
+//    if (s.high_water < curr) {
+//      /* Previous high water mark below current data -- zero WIN_INIT
+//       * bytes or up to end of window, whichever is less.
+//       */
+//      init = s.window_size - curr;
+//      if (init > WIN_INIT)
+//        init = WIN_INIT;
+//      zmemzero(s->window + curr, (unsigned)init);
+//      s->high_water = curr + init;
+//    }
+//    else if (s->high_water < (ulg)curr + WIN_INIT) {
+//      /* High water mark at or above current data, but below current data
+//       * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+//       * to end of window, whichever is less.
+//       */
+//      init = (ulg)curr + WIN_INIT - s->high_water;
+//      if (init > s->window_size - s->high_water)
+//        init = s->window_size - s->high_water;
+//      zmemzero(s->window + s->high_water, (unsigned)init);
+//      s->high_water += init;
+//    }
+//  }
+//
+//  Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+//    "not enough room for search");
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+function deflate_stored(s, flush) {
+  /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+   * to pending_buf_size, and each stored block has a 5 byte header:
+   */
+  var max_block_size = 0xffff;
+
+  if (max_block_size > s.pending_buf_size - 5) {
+    max_block_size = s.pending_buf_size - 5;
+  }
+
+  /* Copy as much as possible from input to output: */
+  for (;;) {
+    /* Fill the window as much as possible: */
+    if (s.lookahead <= 1) {
+
+      //Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+      //  s->block_start >= (long)s->w_size, "slide too late");
+//      if (!(s.strstart < s.w_size + (s.w_size - MIN_LOOKAHEAD) ||
+//        s.block_start >= s.w_size)) {
+//        throw  new Error("slide too late");
+//      }
+
+      fill_window(s);
+      if (s.lookahead === 0 && flush === Z_NO_FLUSH) {
+        return BS_NEED_MORE;
+      }
+
+      if (s.lookahead === 0) {
+        break;
+      }
+      /* flush the current block */
+    }
+    //Assert(s->block_start >= 0L, "block gone");
+//    if (s.block_start < 0) throw new Error("block gone");
+
+    s.strstart += s.lookahead;
+    s.lookahead = 0;
+
+    /* Emit a stored block if pending_buf will be full: */
+    var max_start = s.block_start + max_block_size;
+
+    if (s.strstart === 0 || s.strstart >= max_start) {
+      /* strstart == 0 is possible when wraparound on 16-bit machine */
+      s.lookahead = s.strstart - max_start;
+      s.strstart = max_start;
+      /*** FLUSH_BLOCK(s, 0); ***/
+      flush_block_only(s, false);
+      if (s.strm.avail_out === 0) {
+        return BS_NEED_MORE;
+      }
+      /***/
+
+
+    }
+    /* Flush if we may have to slide, otherwise block_start may become
+     * negative and the data will be gone:
+     */
+    if (s.strstart - s.block_start >= (s.w_size - MIN_LOOKAHEAD)) {
+      /*** FLUSH_BLOCK(s, 0); ***/
+      flush_block_only(s, false);
+      if (s.strm.avail_out === 0) {
+        return BS_NEED_MORE;
+      }
+      /***/
+    }
+  }
+
+  s.insert = 0;
+
+  if (flush === Z_FINISH) {
+    /*** FLUSH_BLOCK(s, 1); ***/
+    flush_block_only(s, true);
+    if (s.strm.avail_out === 0) {
+      return BS_FINISH_STARTED;
+    }
+    /***/
+    return BS_FINISH_DONE;
+  }
+
+  if (s.strstart > s.block_start) {
+    /*** FLUSH_BLOCK(s, 0); ***/
+    flush_block_only(s, false);
+    if (s.strm.avail_out === 0) {
+      return BS_NEED_MORE;
+    }
+    /***/
+  }
+
+  return BS_NEED_MORE;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+function deflate_fast(s, flush) {
+  var hash_head;        /* head of the hash chain */
+  var bflush;           /* set if current block must be flushed */
+
+  for (;;) {
+    /* Make sure that we always have enough lookahead, except
+     * at the end of the input file. We need MAX_MATCH bytes
+     * for the next match, plus MIN_MATCH bytes to insert the
+     * string following the next match.
+     */
+    if (s.lookahead < MIN_LOOKAHEAD) {
+      fill_window(s);
+      if (s.lookahead < MIN_LOOKAHEAD && flush === Z_NO_FLUSH) {
+        return BS_NEED_MORE;
+      }
+      if (s.lookahead === 0) {
+        break; /* flush the current block */
+      }
+    }
+
+    /* Insert the string window[strstart .. strstart+2] in the
+     * dictionary, and set hash_head to the head of the hash chain:
+     */
+    hash_head = 0/*NIL*/;
+    if (s.lookahead >= MIN_MATCH) {
+      /*** INSERT_STRING(s, s.strstart, hash_head); ***/
+      s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) & s.hash_mask;
+      hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
+      s.head[s.ins_h] = s.strstart;
+      /***/
+    }
+
+    /* Find the longest match, discarding those <= prev_length.
+     * At this point we have always match_length < MIN_MATCH
+     */
+    if (hash_head !== 0/*NIL*/ && ((s.strstart - hash_head) <= (s.w_size - MIN_LOOKAHEAD))) {
+      /* To simplify the code, we prevent matches with the string
+       * of window index 0 (in particular we have to avoid a match
+       * of the string with itself at the start of the input file).
+       */
+      s.match_length = longest_match(s, hash_head);
+      /* longest_match() sets match_start */
+    }
+    if (s.match_length >= MIN_MATCH) {
+      // check_match(s, s.strstart, s.match_start, s.match_length); // for debug only
+
+      /*** _tr_tally_dist(s, s.strstart - s.match_start,
+                     s.match_length - MIN_MATCH, bflush); ***/
+      bflush = trees._tr_tally(s, s.strstart - s.match_start, s.match_length - MIN_MATCH);
+
+      s.lookahead -= s.match_length;
+
+      /* Insert new strings in the hash table only if the match length
+       * is not too large. This saves time but degrades compression.
+       */
+      if (s.match_length <= s.max_lazy_match/*max_insert_length*/ && s.lookahead >= MIN_MATCH) {
+        s.match_length--; /* string at strstart already in table */
+        do {
+          s.strstart++;
+          /*** INSERT_STRING(s, s.strstart, hash_head); ***/
+          s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) & s.hash_mask;
+          hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
+          s.head[s.ins_h] = s.strstart;
+          /***/
+          /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+           * always MIN_MATCH bytes ahead.
+           */
+        } while (--s.match_length !== 0);
+        s.strstart++;
+      } else
+      {
+        s.strstart += s.match_length;
+        s.match_length = 0;
+        s.ins_h = s.window[s.strstart];
+        /* UPDATE_HASH(s, s.ins_h, s.window[s.strstart+1]); */
+        s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + 1]) & s.hash_mask;
+
+//#if MIN_MATCH != 3
+//                Call UPDATE_HASH() MIN_MATCH-3 more times
+//#endif
+        /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+         * matter since it will be recomputed at next deflate call.
+         */
+      }
+    } else {
+      /* No match, output a literal byte */
+      //Tracevv((stderr,"%c", s.window[s.strstart]));
+      /*** _tr_tally_lit(s, s.window[s.strstart], bflush); ***/
+      bflush = trees._tr_tally(s, 0, s.window[s.strstart]);
+
+      s.lookahead--;
+      s.strstart++;
+    }
+    if (bflush) {
+      /*** FLUSH_BLOCK(s, 0); ***/
+      flush_block_only(s, false);
+      if (s.strm.avail_out === 0) {
+        return BS_NEED_MORE;
+      }
+      /***/
+    }
+  }
+  s.insert = ((s.strstart < (MIN_MATCH-1)) ? s.strstart : MIN_MATCH-1);
+  if (flush === Z_FINISH) {
+    /*** FLUSH_BLOCK(s, 1); ***/
+    flush_block_only(s, true);
+    if (s.strm.avail_out === 0) {
+      return BS_FINISH_STARTED;
+    }
+    /***/
+    return BS_FINISH_DONE;
+  }
+  if (s.last_lit) {
+    /*** FLUSH_BLOCK(s, 0); ***/
+    flush_block_only(s, false);
+    if (s.strm.avail_out === 0) {
+      return BS_NEED_MORE;
+    }
+    /***/
+  }
+  return BS_BLOCK_DONE;
+}
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+function deflate_slow(s, flush) {
+  var hash_head;          /* head of hash chain */
+  var bflush;              /* set if current block must be flushed */
+
+  var max_insert;
+
+  /* Process the input block. */
+  for (;;) {
+    /* Make sure that we always have enough lookahead, except
+     * at the end of the input file. We need MAX_MATCH bytes
+     * for the next match, plus MIN_MATCH bytes to insert the
+     * string following the next match.
+     */
+    if (s.lookahead < MIN_LOOKAHEAD) {
+      fill_window(s);
+      if (s.lookahead < MIN_LOOKAHEAD && flush === Z_NO_FLUSH) {
+        return BS_NEED_MORE;
+      }
+      if (s.lookahead === 0) { break; } /* flush the current block */
+    }
+
+    /* Insert the string window[strstart .. strstart+2] in the
+     * dictionary, and set hash_head to the head of the hash chain:
+     */
+    hash_head = 0/*NIL*/;
+    if (s.lookahead >= MIN_MATCH) {
+      /*** INSERT_STRING(s, s.strstart, hash_head); ***/
+      s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) & s.hash_mask;
+      hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
+      s.head[s.ins_h] = s.strstart;
+      /***/
+    }
+
+    /* Find the longest match, discarding those <= prev_length.
+     */
+    s.prev_length = s.match_length;
+    s.prev_match = s.match_start;
+    s.match_length = MIN_MATCH-1;
+
+    if (hash_head !== 0/*NIL*/ && s.prev_length < s.max_lazy_match &&
+        s.strstart - hash_head <= (s.w_size-MIN_LOOKAHEAD)/*MAX_DIST(s)*/) {
+      /* To simplify the code, we prevent matches with the string
+       * of window index 0 (in particular we have to avoid a match
+       * of the string with itself at the start of the input file).
+       */
+      s.match_length = longest_match(s, hash_head);
+      /* longest_match() sets match_start */
+
+      if (s.match_length <= 5 &&
+         (s.strategy === Z_FILTERED || (s.match_length === MIN_MATCH && s.strstart - s.match_start > 4096/*TOO_FAR*/))) {
+
+        /* If prev_match is also MIN_MATCH, match_start is garbage
+         * but we will ignore the current match anyway.
+         */
+        s.match_length = MIN_MATCH-1;
+      }
+    }
+    /* If there was a match at the previous step and the current
+     * match is not better, output the previous match:
+     */
+    if (s.prev_length >= MIN_MATCH && s.match_length <= s.prev_length) {
+      max_insert = s.strstart + s.lookahead - MIN_MATCH;
+      /* Do not insert strings in hash table beyond this. */
+
+      //check_match(s, s.strstart-1, s.prev_match, s.prev_length);
+
+      /***_tr_tally_dist(s, s.strstart - 1 - s.prev_match,
+                     s.prev_length - MIN_MATCH, bflush);***/
+      bflush = trees._tr_tally(s, s.strstart - 1- s.prev_match, s.prev_length - MIN_MATCH);
+      /* Insert in hash table all strings up to the end of the match.
+       * strstart-1 and strstart are already inserted. If there is not
+       * enough lookahead, the last two strings are not inserted in
+       * the hash table.
+       */
+      s.lookahead -= s.prev_length-1;
+      s.prev_length -= 2;
+      do {
+        if (++s.strstart <= max_insert) {
+          /*** INSERT_STRING(s, s.strstart, hash_head); ***/
+          s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) & s.hash_mask;
+          hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
+          s.head[s.ins_h] = s.strstart;
+          /***/
+        }
+      } while (--s.prev_length !== 0);
+      s.match_available = 0;
+      s.match_length = MIN_MATCH-1;
+      s.strstart++;
+
+      if (bflush) {
+        /*** FLUSH_BLOCK(s, 0); ***/
+        flush_block_only(s, false);
+        if (s.strm.avail_out === 0) {
+          return BS_NEED_MORE;
+        }
+        /***/
+      }
+
+    } else if (s.match_available) {
+      /* If there was no match at the previous position, output a
+       * single literal. If there was a match but the current match
+       * is longer, truncate the previous match to a single literal.
+       */
+      //Tracevv((stderr,"%c", s->window[s->strstart-1]));
+      /*** _tr_tally_lit(s, s.window[s.strstart-1], bflush); ***/
+      bflush = trees._tr_tally(s, 0, s.window[s.strstart-1]);
+
+      if (bflush) {
+        /*** FLUSH_BLOCK_ONLY(s, 0) ***/
+        flush_block_only(s, false);
+        /***/
+      }
+      s.strstart++;
+      s.lookahead--;
+      if (s.strm.avail_out === 0) {
+        return BS_NEED_MORE;
+      }
+    } else {
+      /* There is no previous match to compare with, wait for
+       * the next step to decide.
+       */
+      s.match_available = 1;
+      s.strstart++;
+      s.lookahead--;
+    }
+  }
+  //Assert (flush != Z_NO_FLUSH, "no flush?");
+  if (s.match_available) {
+    //Tracevv((stderr,"%c", s->window[s->strstart-1]));
+    /*** _tr_tally_lit(s, s.window[s.strstart-1], bflush); ***/
+    bflush = trees._tr_tally(s, 0, s.window[s.strstart-1]);
+
+    s.match_available = 0;
+  }
+  s.insert = s.strstart < MIN_MATCH-1 ? s.strstart : MIN_MATCH-1;
+  if (flush === Z_FINISH) {
+    /*** FLUSH_BLOCK(s, 1); ***/
+    flush_block_only(s, true);
+    if (s.strm.avail_out === 0) {
+      return BS_FINISH_STARTED;
+    }
+    /***/
+    return BS_FINISH_DONE;
+  }
+  if (s.last_lit) {
+    /*** FLUSH_BLOCK(s, 0); ***/
+    flush_block_only(s, false);
+    if (s.strm.avail_out === 0) {
+      return BS_NEED_MORE;
+    }
+    /***/
+  }
+
+  return BS_BLOCK_DONE;
+}
+
+
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one.  Do not maintain a hash table.  (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+function deflate_rle(s, flush) {
+  var bflush;            /* set if current block must be flushed */
+  var prev;              /* byte at distance one to match */
+  var scan, strend;      /* scan goes up to strend for length of run */
+
+  var _win = s.window;
+
+  for (;;) {
+    /* Make sure that we always have enough lookahead, except
+     * at the end of the input file. We need MAX_MATCH bytes
+     * for the longest run, plus one for the unrolled loop.
+     */
+    if (s.lookahead <= MAX_MATCH) {
+      fill_window(s);
+      if (s.lookahead <= MAX_MATCH && flush === Z_NO_FLUSH) {
+        return BS_NEED_MORE;
+      }
+      if (s.lookahead === 0) { break; } /* flush the current block */
+    }
+
+    /* See how many times the previous byte repeats */
+    s.match_length = 0;
+    if (s.lookahead >= MIN_MATCH && s.strstart > 0) {
+      scan = s.strstart - 1;
+      prev = _win[scan];
+      if (prev === _win[++scan] && prev === _win[++scan] && prev === _win[++scan]) {
+        strend = s.strstart + MAX_MATCH;
+        do {
+          /*jshint noempty:false*/
+        } while (prev === _win[++scan] && prev === _win[++scan] &&
+                 prev === _win[++scan] && prev === _win[++scan] &&
+                 prev === _win[++scan] && prev === _win[++scan] &&
+                 prev === _win[++scan] && prev === _win[++scan] &&
+                 scan < strend);
+        s.match_length = MAX_MATCH - (strend - scan);
+        if (s.match_length > s.lookahead) {
+          s.match_length = s.lookahead;
+        }
+      }
+      //Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
+    }
+
+    /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+    if (s.match_length >= MIN_MATCH) {
+      //check_match(s, s.strstart, s.strstart - 1, s.match_length);
+
+      /*** _tr_tally_dist(s, 1, s.match_length - MIN_MATCH, bflush); ***/
+      bflush = trees._tr_tally(s, 1, s.match_length - MIN_MATCH);
+
+      s.lookahead -= s.match_length;
+      s.strstart += s.match_length;
+      s.match_length = 0;
+    } else {
+      /* No match, output a literal byte */
+      //Tracevv((stderr,"%c", s->window[s->strstart]));
+      /*** _tr_tally_lit(s, s.window[s.strstart], bflush); ***/
+      bflush = trees._tr_tally(s, 0, s.window[s.strstart]);
+
+      s.lookahead--;
+      s.strstart++;
+    }
+    if (bflush) {
+      /*** FLUSH_BLOCK(s, 0); ***/
+      flush_block_only(s, false);
+      if (s.strm.avail_out === 0) {
+        return BS_NEED_MORE;
+      }
+      /***/
+    }
+  }
+  s.insert = 0;
+  if (flush === Z_FINISH) {
+    /*** FLUSH_BLOCK(s, 1); ***/
+    flush_block_only(s, true);
+    if (s.strm.avail_out === 0) {
+      return BS_FINISH_STARTED;
+    }
+    /***/
+    return BS_FINISH_DONE;
+  }
+  if (s.last_lit) {
+    /*** FLUSH_BLOCK(s, 0); ***/
+    flush_block_only(s, false);
+    if (s.strm.avail_out === 0) {
+      return BS_NEED_MORE;
+    }
+    /***/
+  }
+  return BS_BLOCK_DONE;
+}
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+function deflate_huff(s, flush) {
+  var bflush;             /* set if current block must be flushed */
+
+  for (;;) {
+    /* Make sure that we have a literal to write. */
+    if (s.lookahead === 0) {
+      fill_window(s);
+      if (s.lookahead === 0) {
+        if (flush === Z_NO_FLUSH) {
+          return BS_NEED_MORE;
+        }
+        break;      /* flush the current block */
+      }
+    }
+
+    /* Output a literal byte */
+    s.match_length = 0;
+    //Tracevv((stderr,"%c", s->window[s->strstart]));
+    /*** _tr_tally_lit(s, s.window[s.strstart], bflush); ***/
+    bflush = trees._tr_tally(s, 0, s.window[s.strstart]);
+    s.lookahead--;
+    s.strstart++;
+    if (bflush) {
+      /*** FLUSH_BLOCK(s, 0); ***/
+      flush_block_only(s, false);
+      if (s.strm.avail_out === 0) {
+        return BS_NEED_MORE;
+      }
+      /***/
+    }
+  }
+  s.insert = 0;
+  if (flush === Z_FINISH) {
+    /*** FLUSH_BLOCK(s, 1); ***/
+    flush_block_only(s, true);
+    if (s.strm.avail_out === 0) {
+      return BS_FINISH_STARTED;
+    }
+    /***/
+    return BS_FINISH_DONE;
+  }
+  if (s.last_lit) {
+    /*** FLUSH_BLOCK(s, 0); ***/
+    flush_block_only(s, false);
+    if (s.strm.avail_out === 0) {
+      return BS_NEED_MORE;
+    }
+    /***/
+  }
+  return BS_BLOCK_DONE;
+}
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+var Config = function (good_length, max_lazy, nice_length, max_chain, func) {
+  this.good_length = good_length;
+  this.max_lazy = max_lazy;
+  this.nice_length = nice_length;
+  this.max_chain = max_chain;
+  this.func = func;
+};
+
+var configuration_table;
+
+configuration_table = [
+  /*      good lazy nice chain */
+  new Config(0, 0, 0, 0, deflate_stored),          /* 0 store only */
+  new Config(4, 4, 8, 4, deflate_fast),            /* 1 max speed, no lazy matches */
+  new Config(4, 5, 16, 8, deflate_fast),           /* 2 */
+  new Config(4, 6, 32, 32, deflate_fast),          /* 3 */
+
+  new Config(4, 4, 16, 16, deflate_slow),          /* 4 lazy matches */
+  new Config(8, 16, 32, 32, deflate_slow),         /* 5 */
+  new Config(8, 16, 128, 128, deflate_slow),       /* 6 */
+  new Config(8, 32, 128, 256, deflate_slow),       /* 7 */
+  new Config(32, 128, 258, 1024, deflate_slow),    /* 8 */
+  new Config(32, 258, 258, 4096, deflate_slow)     /* 9 max compression */
+];
+
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+function lm_init(s) {
+  s.window_size = 2 * s.w_size;
+
+  /*** CLEAR_HASH(s); ***/
+  zero(s.head); // Fill with NIL (= 0);
+
+  /* Set the default configuration parameters:
+   */
+  s.max_lazy_match = configuration_table[s.level].max_lazy;
+  s.good_match = configuration_table[s.level].good_length;
+  s.nice_match = configuration_table[s.level].nice_length;
+  s.max_chain_length = configuration_table[s.level].max_chain;
+
+  s.strstart = 0;
+  s.block_start = 0;
+  s.lookahead = 0;
+  s.insert = 0;
+  s.match_length = s.prev_length = MIN_MATCH - 1;
+  s.match_available = 0;
+  s.ins_h = 0;
+}
+
+
+function DeflateState() {
+  this.strm = null;            /* pointer back to this zlib stream */
+  this.status = 0;            /* as the name implies */
+  this.pending_buf = null;      /* output still pending */
+  this.pending_buf_size = 0;  /* size of pending_buf */
+  this.pending_out = 0;       /* next pending byte to output to the stream */
+  this.pending = 0;           /* nb of bytes in the pending buffer */
+  this.wrap = 0;              /* bit 0 true for zlib, bit 1 true for gzip */
+  this.gzhead = null;         /* gzip header information to write */
+  this.gzindex = 0;           /* where in extra, name, or comment */
+  this.method = Z_DEFLATED; /* can only be DEFLATED */
+  this.last_flush = -1;   /* value of flush param for previous deflate call */
+
+  this.w_size = 0;  /* LZ77 window size (32K by default) */
+  this.w_bits = 0;  /* log2(w_size)  (8..16) */
+  this.w_mask = 0;  /* w_size - 1 */
+
+  this.window = null;
+  /* Sliding window. Input bytes are read into the second half of the window,
+   * and move to the first half later to keep a dictionary of at least wSize
+   * bytes. With this organization, matches are limited to a distance of
+   * wSize-MAX_MATCH bytes, but this ensures that IO is always
+   * performed with a length multiple of the block size.
+   */
+
+  this.window_size = 0;
+  /* Actual size of window: 2*wSize, except when the user input buffer
+   * is directly used as sliding window.
+   */
+
+  this.prev = null;
+  /* Link to older string with same hash index. To limit the size of this
+   * array to 64K, this link is maintained only for the last 32K strings.
+   * An index in this array is thus a window index modulo 32K.
+   */
+
+  this.head = null;   /* Heads of the hash chains or NIL. */
+
+  this.ins_h = 0;       /* hash index of string to be inserted */
+  this.hash_size = 0;   /* number of elements in hash table */
+  this.hash_bits = 0;   /* log2(hash_size) */
+  this.hash_mask = 0;   /* hash_size-1 */
+
+  this.hash_shift = 0;
+  /* Number of bits by which ins_h must be shifted at each input
+   * step. It must be such that after MIN_MATCH steps, the oldest
+   * byte no longer takes part in the hash key, that is:
+   *   hash_shift * MIN_MATCH >= hash_bits
+   */
+
+  this.block_start = 0;
+  /* Window position at the beginning of the current output block. Gets
+   * negative when the window is moved backwards.
+   */
+
+  this.match_length = 0;      /* length of best match */
+  this.prev_match = 0;        /* previous match */
+  this.match_available = 0;   /* set if previous match exists */
+  this.strstart = 0;          /* start of string to insert */
+  this.match_start = 0;       /* start of matching string */
+  this.lookahead = 0;         /* number of valid bytes ahead in window */
+
+  this.prev_length = 0;
+  /* Length of the best match at previous step. Matches not greater than this
+   * are discarded. This is used in the lazy match evaluation.
+   */
+
+  this.max_chain_length = 0;
+  /* To speed up deflation, hash chains are never searched beyond this
+   * length.  A higher limit improves compression ratio but degrades the
+   * speed.
+   */
+
+  this.max_lazy_match = 0;
+  /* Attempt to find a better match only when the current match is strictly
+   * smaller than this value. This mechanism is used only for compression
+   * levels >= 4.
+   */
+  // That's alias to max_lazy_match, don't use directly
+  //this.max_insert_length = 0;
+  /* Insert new strings in the hash table only if the match length is not
+   * greater than this length. This saves time but degrades compression.
+   * max_insert_length is used only for compression levels <= 3.
+   */
+
+  this.level = 0;     /* compression level (1..9) */
+  this.strategy = 0;  /* favor or force Huffman coding*/
+
+  this.good_match = 0;
+  /* Use a faster search when the previous match is longer than this */
+
+  this.nice_match = 0; /* Stop searching when current match exceeds this */
+
+              /* used by trees.c: */
+
+  /* Didn't use ct_data typedef below to suppress compiler warning */
+
+  // struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
+  // struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+  // struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
+
+  // Use flat array of DOUBLE size, with interleaved fata,
+  // because JS does not support effective
+  this.dyn_ltree  = new utils.Buf16(HEAP_SIZE * 2);
+  this.dyn_dtree  = new utils.Buf16((2*D_CODES+1) * 2);
+  this.bl_tree    = new utils.Buf16((2*BL_CODES+1) * 2);
+  zero(this.dyn_ltree);
+  zero(this.dyn_dtree);
+  zero(this.bl_tree);
+
+  this.l_desc   = null;         /* desc. for literal tree */
+  this.d_desc   = null;         /* desc. for distance tree */
+  this.bl_desc  = null;         /* desc. for bit length tree */
+
+  //ush bl_count[MAX_BITS+1];
+  this.bl_count = new utils.Buf16(MAX_BITS+1);
+  /* number of codes at each bit length for an optimal tree */
+
+  //int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
+  this.heap = new utils.Buf16(2*L_CODES+1);  /* heap used to build the Huffman trees */
+  zero(this.heap);
+
+  this.heap_len = 0;               /* number of elements in the heap */
+  this.heap_max = 0;               /* element of largest frequency */
+  /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+   * The same heap array is used to build all trees.
+   */
+
+  this.depth = new utils.Buf16(2*L_CODES+1); //uch depth[2*L_CODES+1];
+  zero(this.depth);
+  /* Depth of each subtree used as tie breaker for trees of equal frequency
+   */
+
+  this.l_buf = 0;          /* buffer index for literals or lengths */
+
+  this.lit_bufsize = 0;
+  /* Size of match buffer for literals/lengths.  There are 4 reasons for
+   * limiting lit_bufsize to 64K:
+   *   - frequencies can be kept in 16 bit counters
+   *   - if compression is not successful for the first block, all input
+   *     data is still in the window so we can still emit a stored block even
+   *     when input comes from standard input.  (This can also be done for
+   *     all blocks if lit_bufsize is not greater than 32K.)
+   *   - if compression is not successful for a file smaller than 64K, we can
+   *     even emit a stored file instead of a stored block (saving 5 bytes).
+   *     This is applicable only for zip (not gzip or zlib).
+   *   - creating new Huffman trees less frequently may not provide fast
+   *     adaptation to changes in the input data statistics. (Take for
+   *     example a binary file with poorly compressible code followed by
+   *     a highly compressible string table.) Smaller buffer sizes give
+   *     fast adaptation but have of course the overhead of transmitting
+   *     trees more frequently.
+   *   - I can't count above 4
+   */
+
+  this.last_lit = 0;      /* running index in l_buf */
+
+  this.d_buf = 0;
+  /* Buffer index for distances. To simplify the code, d_buf and l_buf have
+   * the same number of elements. To use different lengths, an extra flag
+   * array would be necessary.
+   */
+
+  this.opt_len = 0;       /* bit length of current block with optimal trees */
+  this.static_len = 0;    /* bit length of current block with static trees */
+  this.matches = 0;       /* number of string matches in current block */
+  this.insert = 0;        /* bytes at end of window left to insert */
+
+
+  this.bi_buf = 0;
+  /* Output buffer. bits are inserted starting at the bottom (least
+   * significant bits).
+   */
+  this.bi_valid = 0;
+  /* Number of valid bits in bi_buf.  All bits above the last valid bit
+   * are always zero.
+   */
+
+  // Used for window memory init. We safely ignore it for JS. That makes
+  // sense only for pointers and memory check tools.
+  //this.high_water = 0;
+  /* High water mark offset in window for initialized bytes -- bytes above
+   * this are set to zero in order to avoid memory check warnings when
+   * longest match routines access bytes past the input.  This is then
+   * updated to the new high water mark.
+   */
+}
+
+
+function deflateResetKeep(strm) {
+  var s;
+
+  if (!strm || !strm.state) {
+    return err(strm, Z_STREAM_ERROR);
+  }
+
+  strm.total_in = strm.total_out = 0;
+  strm.data_type = Z_UNKNOWN;
+
+  s = strm.state;
+  s.pending = 0;
+  s.pending_out = 0;
+
+  if (s.wrap < 0) {
+    s.wrap = -s.wrap;
+    /* was made negative by deflate(..., Z_FINISH); */
+  }
+  s.status = (s.wrap ? INIT_STATE : BUSY_STATE);
+  strm.adler = (s.wrap === 2) ?
+    0  // crc32(0, Z_NULL, 0)
+  :
+    1; // adler32(0, Z_NULL, 0)
+  s.last_flush = Z_NO_FLUSH;
+  trees._tr_init(s);
+  return Z_OK;
+}
+
+
+function deflateReset(strm) {
+  var ret = deflateResetKeep(strm);
+  if (ret === Z_OK) {
+    lm_init(strm.state);
+  }
+  return ret;
+}
+
+
+function deflateSetHeader(strm, head) {
+  if (!strm || !strm.state) { return Z_STREAM_ERROR; }
+  if (strm.state.wrap !== 2) { return Z_STREAM_ERROR; }
+  strm.state.gzhead = head;
+  return Z_OK;
+}
+
+
+function deflateInit2(strm, level, method, windowBits, memLevel, strategy) {
+  if (!strm) { // === Z_NULL
+    return Z_STREAM_ERROR;
+  }
+  var wrap = 1;
+
+  if (level === Z_DEFAULT_COMPRESSION) {
+    level = 6;
+  }
+
+  if (windowBits < 0) { /* suppress zlib wrapper */
+    wrap = 0;
+    windowBits = -windowBits;
+  }
+
+  else if (windowBits > 15) {
+    wrap = 2;           /* write gzip wrapper instead */
+    windowBits -= 16;
+  }
+
+
+  if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method !== Z_DEFLATED ||
+    windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+    strategy < 0 || strategy > Z_FIXED) {
+    return err(strm, Z_STREAM_ERROR);
+  }
+
+
+  if (windowBits === 8) {
+    windowBits = 9;
+  }
+  /* until 256-byte window bug fixed */
+
+  var s = new DeflateState();
+
+  strm.state = s;
+  s.strm = strm;
+
+  s.wrap = wrap;
+  s.gzhead = null;
+  s.w_bits = windowBits;
+  s.w_size = 1 << s.w_bits;
+  s.w_mask = s.w_size - 1;
+
+  s.hash_bits = memLevel + 7;
+  s.hash_size = 1 << s.hash_bits;
+  s.hash_mask = s.hash_size - 1;
+  s.hash_shift = ~~((s.hash_bits + MIN_MATCH - 1) / MIN_MATCH);
+
+  s.window = new utils.Buf8(s.w_size * 2);
+  s.head = new utils.Buf16(s.hash_size);
+  s.prev = new utils.Buf16(s.w_size);
+
+  // Don't need mem init magic for JS.
+  //s.high_water = 0;  /* nothing written to s->window yet */
+
+  s.lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+  s.pending_buf_size = s.lit_bufsize * 4;
+  s.pending_buf = new utils.Buf8(s.pending_buf_size);
+
+  s.d_buf = s.lit_bufsize >> 1;
+  s.l_buf = (1 + 2) * s.lit_bufsize;
+
+  s.level = level;
+  s.strategy = strategy;
+  s.method = method;
+
+  return deflateReset(strm);
+}
+
+function deflateInit(strm, level) {
+  return deflateInit2(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY);
+}
+
+
+function deflate(strm, flush) {
+  var old_flush, s;
+  var beg, val; // for gzip header write only
+
+  if (!strm || !strm.state ||
+    flush > Z_BLOCK || flush < 0) {
+    return strm ? err(strm, Z_STREAM_ERROR) : Z_STREAM_ERROR;
+  }
+
+  s = strm.state;
+
+  if (!strm.output ||
+      (!strm.input && strm.avail_in !== 0) ||
+      (s.status === FINISH_STATE && flush !== Z_FINISH)) {
+    return err(strm, (strm.avail_out === 0) ? Z_BUF_ERROR : Z_STREAM_ERROR);
+  }
+
+  s.strm = strm; /* just in case */
+  old_flush = s.last_flush;
+  s.last_flush = flush;
+
+  /* Write the header */
+  if (s.status === INIT_STATE) {
+
+    if (s.wrap === 2) { // GZIP header
+      strm.adler = 0;  //crc32(0L, Z_NULL, 0);
+      put_byte(s, 31);
+      put_byte(s, 139);
+      put_byte(s, 8);
+      if (!s.gzhead) { // s->gzhead == Z_NULL
+        put_byte(s, 0);
+        put_byte(s, 0);
+        put_byte(s, 0);
+        put_byte(s, 0);
+        put_byte(s, 0);
+        put_byte(s, s.level === 9 ? 2 :
+                    (s.strategy >= Z_HUFFMAN_ONLY || s.level < 2 ?
+                     4 : 0));
+        put_byte(s, OS_CODE);
+        s.status = BUSY_STATE;
+      }
+      else {
+        put_byte(s, (s.gzhead.text ? 1 : 0) +
+                    (s.gzhead.hcrc ? 2 : 0) +
+                    (!s.gzhead.extra ? 0 : 4) +
+                    (!s.gzhead.name ? 0 : 8) +
+                    (!s.gzhead.comment ? 0 : 16)
+                );
+        put_byte(s, s.gzhead.time & 0xff);
+        put_byte(s, (s.gzhead.time >> 8) & 0xff);
+        put_byte(s, (s.gzhead.time >> 16) & 0xff);
+        put_byte(s, (s.gzhead.time >> 24) & 0xff);
+        put_byte(s, s.level === 9 ? 2 :
+                    (s.strategy >= Z_HUFFMAN_ONLY || s.level < 2 ?
+                     4 : 0));
+        put_byte(s, s.gzhead.os & 0xff);
+        if (s.gzhead.extra && s.gzhead.extra.length) {
+          put_byte(s, s.gzhead.extra.length & 0xff);
+          put_byte(s, (s.gzhead.extra.length >> 8) & 0xff);
+        }
+        if (s.gzhead.hcrc) {
+          strm.adler = crc32(strm.adler, s.pending_buf, s.pending, 0);
+        }
+        s.gzindex = 0;
+        s.status = EXTRA_STATE;
+      }
+    }
+    else // DEFLATE header
+    {
+      var header = (Z_DEFLATED + ((s.w_bits - 8) << 4)) << 8;
+      var level_flags = -1;
+
+      if (s.strategy >= Z_HUFFMAN_ONLY || s.level < 2) {
+        level_flags = 0;
+      } else if (s.level < 6) {
+        level_flags = 1;
+      } else if (s.level === 6) {
+        level_flags = 2;
+      } else {
+        level_flags = 3;
+      }
+      header |= (level_flags << 6);
+      if (s.strstart !== 0) { header |= PRESET_DICT; }
+      header += 31 - (header % 31);
+
+      s.status = BUSY_STATE;
+      putShortMSB(s, header);
+
+      /* Save the adler32 of the preset dictionary: */
+      if (s.strstart !== 0) {
+        putShortMSB(s, strm.adler >>> 16);
+        putShortMSB(s, strm.adler & 0xffff);
+      }
+      strm.adler = 1; // adler32(0L, Z_NULL, 0);
+    }
+  }
+
+//#ifdef GZIP
+  if (s.status === EXTRA_STATE) {
+    if (s.gzhead.extra/* != Z_NULL*/) {
+      beg = s.pending;  /* start of bytes to update crc */
+
+      while (s.gzindex < (s.gzhead.extra.length & 0xffff)) {
+        if (s.pending === s.pending_buf_size) {
+          if (s.gzhead.hcrc && s.pending > beg) {
+            strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
+          }
+          flush_pending(strm);
+          beg = s.pending;
+          if (s.pending === s.pending_buf_size) {
+            break;
+          }
+        }
+        put_byte(s, s.gzhead.extra[s.gzindex] & 0xff);
+        s.gzindex++;
+      }
+      if (s.gzhead.hcrc && s.pending > beg) {
+        strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
+      }
+      if (s.gzindex === s.gzhead.extra.length) {
+        s.gzindex = 0;
+        s.status = NAME_STATE;
+      }
+    }
+    else {
+      s.status = NAME_STATE;
+    }
+  }
+  if (s.status === NAME_STATE) {
+    if (s.gzhead.name/* != Z_NULL*/) {
+      beg = s.pending;  /* start of bytes to update crc */
+      //int val;
+
+      do {
+        if (s.pending === s.pending_buf_size) {
+          if (s.gzhead.hcrc && s.pending > beg) {
+            strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
+          }
+          flush_pending(strm);
+          beg = s.pending;
+          if (s.pending === s.pending_buf_size) {
+            val = 1;
+            break;
+          }
+        }
+        // JS specific: little magic to add zero terminator to end of string
+        if (s.gzindex < s.gzhead.name.length) {
+          val = s.gzhead.name.charCodeAt(s.gzindex++) & 0xff;
+        } else {
+          val = 0;
+        }
+        put_byte(s, val);
+      } while (val !== 0);
+
+      if (s.gzhead.hcrc && s.pending > beg) {
+        strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
+      }
+      if (val === 0) {
+        s.gzindex = 0;
+        s.status = COMMENT_STATE;
+      }
+    }
+    else {
+      s.status = COMMENT_STATE;
+    }
+  }
+  if (s.status === COMMENT_STATE) {
+    if (s.gzhead.comment/* != Z_NULL*/) {
+      beg = s.pending;  /* start of bytes to update crc */
+      //int val;
+
+      do {
+        if (s.pending === s.pending_buf_size) {
+          if (s.gzhead.hcrc && s.pending > beg) {
+            strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
+          }
+          flush_pending(strm);
+          beg = s.pending;
+          if (s.pending === s.pending_buf_size) {
+            val = 1;
+            break;
+          }
+        }
+        // JS specific: little magic to add zero terminator to end of string
+        if (s.gzindex < s.gzhead.comment.length) {
+          val = s.gzhead.comment.charCodeAt(s.gzindex++) & 0xff;
+        } else {
+          val = 0;
+        }
+        put_byte(s, val);
+      } while (val !== 0);
+
+      if (s.gzhead.hcrc && s.pending > beg) {
+        strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
+      }
+      if (val === 0) {
+        s.status = HCRC_STATE;
+      }
+    }
+    else {
+      s.status = HCRC_STATE;
+    }
+  }
+  if (s.status === HCRC_STATE) {
+    if (s.gzhead.hcrc) {
+      if (s.pending + 2 > s.pending_buf_size) {
+        flush_pending(strm);
+      }
+      if (s.pending + 2 <= s.pending_buf_size) {
+        put_byte(s, strm.adler & 0xff);
+        put_byte(s, (strm.adler >> 8) & 0xff);
+        strm.adler = 0; //crc32(0L, Z_NULL, 0);
+        s.status = BUSY_STATE;
+      }
+    }
+    else {
+      s.status = BUSY_STATE;
+    }
+  }
+//#endif
+
+  /* Flush as much pending output as possible */
+  if (s.pending !== 0) {
+    flush_pending(strm);
+    if (strm.avail_out === 0) {
+      /* Since avail_out is 0, deflate will be called again with
+       * more output space, but possibly with both pending and
+       * avail_in equal to zero. There won't be anything to do,
+       * but this is not an error situation so make sure we
+       * return OK instead of BUF_ERROR at next call of deflate:
+       */
+      s.last_flush = -1;
+      return Z_OK;
+    }
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUF_ERROR.
+     */
+  } else if (strm.avail_in === 0 && rank(flush) <= rank(old_flush) &&
+    flush !== Z_FINISH) {
+    return err(strm, Z_BUF_ERROR);
+  }
+
+  /* User must not provide more input after the first FINISH: */
+  if (s.status === FINISH_STATE && strm.avail_in !== 0) {
+    return err(strm, Z_BUF_ERROR);
+  }
+
+  /* Start a new block or continue the current one.
+   */
+  if (strm.avail_in !== 0 || s.lookahead !== 0 ||
+    (flush !== Z_NO_FLUSH && s.status !== FINISH_STATE)) {
+    var bstate = (s.strategy === Z_HUFFMAN_ONLY) ? deflate_huff(s, flush) :
+      (s.strategy === Z_RLE ? deflate_rle(s, flush) :
+        configuration_table[s.level].func(s, flush));
+
+    if (bstate === BS_FINISH_STARTED || bstate === BS_FINISH_DONE) {
+      s.status = FINISH_STATE;
+    }
+    if (bstate === BS_NEED_MORE || bstate === BS_FINISH_STARTED) {
+      if (strm.avail_out === 0) {
+        s.last_flush = -1;
+        /* avoid BUF_ERROR next call, see above */
+      }
+      return Z_OK;
+      /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+       * of deflate should use the same flush parameter to make sure
+       * that the flush is complete. So we don't have to output an
+       * empty block here, this will be done at next call. This also
+       * ensures that for a very small output buffer, we emit at most
+       * one empty block.
+       */
+    }
+    if (bstate === BS_BLOCK_DONE) {
+      if (flush === Z_PARTIAL_FLUSH) {
+        trees._tr_align(s);
+      }
+      else if (flush !== Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
+
+        trees._tr_stored_block(s, 0, 0, false);
+        /* For a full flush, this empty block will be recognized
+         * as a special marker by inflate_sync().
+         */
+        if (flush === Z_FULL_FLUSH) {
+          /*** CLEAR_HASH(s); ***/             /* forget history */
+          zero(s.head); // Fill with NIL (= 0);
+
+          if (s.lookahead === 0) {
+            s.strstart = 0;
+            s.block_start = 0;
+            s.insert = 0;
+          }
+        }
+      }
+      flush_pending(strm);
+      if (strm.avail_out === 0) {
+        s.last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+        return Z_OK;
+      }
+    }
+  }
+  //Assert(strm->avail_out > 0, "bug2");
+  //if (strm.avail_out <= 0) { throw new Error("bug2");}
+
+  if (flush !== Z_FINISH) { return Z_OK; }
+  if (s.wrap <= 0) { return Z_STREAM_END; }
+
+  /* Write the trailer */
+  if (s.wrap === 2) {
+    put_byte(s, strm.adler & 0xff);
+    put_byte(s, (strm.adler >> 8) & 0xff);
+    put_byte(s, (strm.adler >> 16) & 0xff);
+    put_byte(s, (strm.adler >> 24) & 0xff);
+    put_byte(s, strm.total_in & 0xff);
+    put_byte(s, (strm.total_in >> 8) & 0xff);
+    put_byte(s, (strm.total_in >> 16) & 0xff);
+    put_byte(s, (strm.total_in >> 24) & 0xff);
+  }
+  else
+  {
+    putShortMSB(s, strm.adler >>> 16);
+    putShortMSB(s, strm.adler & 0xffff);
+  }
+
+  flush_pending(strm);
+  /* If avail_out is zero, the application will call deflate again
+   * to flush the rest.
+   */
+  if (s.wrap > 0) { s.wrap = -s.wrap; }
+  /* write the trailer only once! */
+  return s.pending !== 0 ? Z_OK : Z_STREAM_END;
+}
+
+function deflateEnd(strm) {
+  var status;
+
+  if (!strm/*== Z_NULL*/ || !strm.state/*== Z_NULL*/) {
+    return Z_STREAM_ERROR;
+  }
+
+  status = strm.state.status;
+  if (status !== INIT_STATE &&
+    status !== EXTRA_STATE &&
+    status !== NAME_STATE &&
+    status !== COMMENT_STATE &&
+    status !== HCRC_STATE &&
+    status !== BUSY_STATE &&
+    status !== FINISH_STATE
+  ) {
+    return err(strm, Z_STREAM_ERROR);
+  }
+
+  strm.state = null;
+
+  return status === BUSY_STATE ? err(strm, Z_DATA_ERROR) : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state
+ */
+//function deflateCopy(dest, source) {
+//
+//}
+
+exports.deflateInit = deflateInit;
+exports.deflateInit2 = deflateInit2;
+exports.deflateReset = deflateReset;
+exports.deflateResetKeep = deflateResetKeep;
+exports.deflateSetHeader = deflateSetHeader;
+exports.deflate = deflate;
+exports.deflateEnd = deflateEnd;
+exports.deflateInfo = 'pako deflate (from Nodeca project)';
+
+/* Not implemented
+exports.deflateBound = deflateBound;
+exports.deflateCopy = deflateCopy;
+exports.deflateSetDictionary = deflateSetDictionary;
+exports.deflateParams = deflateParams;
+exports.deflatePending = deflatePending;
+exports.deflatePrime = deflatePrime;
+exports.deflateTune = deflateTune;
+*/