asana2flowdock 1.0.0 → 1.1.0

data/vendor/bundle/ruby/1.9.1/gems/pry-0.9.12.6/CONTRIBUTORS

@@ -1,55 +0,0 @@
-  1068	John Mair
-   372	Conrad Irwin
-   215	Ryan Fitzgerald
-   108	Kyrylo Silin
-    92	Rob Gleeson
-    54	Mon ouïe
-    51	Lee Jarvis
-    47	☈king
-    40	Jordon Bedwell
-    28	Yorick Peterse
-    18	David Palm
-    18	Robert Gleeson
-    15	epitron
-    12	Andrew Vos
-    11	Reginald Tan
-    10	Matt Carey
-     8	Eero Saynatkari
-     8	Trey Lawrence
-     6	Jason Laster
-     3	misfo
-     3	fowlmouth
-     3	Darrick Wiebe
-     2	Kelsey Judson
-     2	Ben Langfeld
-     2	Bram Swenson
-     2	Erik Michaels-Ober
-     2	Ingrid
-     2	Vít Ondruch
-     2	Xavier Shay
-     2	Jonathan Soeder
-     2	Eric Christopherson
-     2	robgleeson
-     1	Ben Pickles
-     1	Zeh Rizzatti
-     1	shirmung
-     1	sonnym
-     1	Shawn Anderson
-     1	Joe Peduto
-     1	Greg Stearns
-     1	Jonathan Jackson
-     1	Jordan Running
-     1	Gosha Arinich
-     1	Josh Cheek
-     1	Kirill Lashuk
-     1	Gerbert Olivé
-     1	Larry Gilbert
-     1	Lars Haugseth
-     1	Loic Nageleisen
-     1	Matthew Carey
-     1	Michael Bensoussan
-     1	Renato Mascarenhas
-     1	Havenwood
-     1	Sherin C
-     1	Sonali Sridhar
-     1	Tim Pope

data/vendor/bundle/ruby/1.9.1/gems/pry-0.9.12.6/Gemfile

@@ -1,12 +0,0 @@
-source 'https://rubygems.org'
-gemspec
-
-group :development do
-  gem 'jist'
-end
-
-if RbConfig::CONFIG['ruby_install_name'] == 'rbx'
-  gem 'rubysl-singleton'
-  gem 'rubysl-prettyprint'
-  gem 'rb-readline'
-end

data/vendor/bundle/ruby/1.9.1/gems/pry-0.9.12.6/LICENSE

@@ -1,25 +0,0 @@
-License
--------
-
-(The MIT License) 
-
-Copyright (c) 2011 John Mair (banisterfiend)
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-'Software'), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/bundle/ruby/1.9.1/gems/pry-0.9.12.6/README.markdown

@@ -1,400 +0,0 @@
-[![Build Status](https://secure.travis-ci.org/pry/pry.png)](http://travis-ci.org/pry/pry)
-
-<center>
-![The Pry Logo](https://dl.dropbox.com/u/26521875/pry%20stuff/logo/pry_logo_350.png)
-
-© John Mair (banisterfiend) 2012<br>
-
-**Please** [DONATE](http://www.pledgie.com/campaigns/15899) to the Pry project - Pry was a **huge** amount of work and every donation received is encouraging and supports Pry's continued development!
-
-**Sponsors**
-
-[Atomic Object](http://www.atomicobject.com/)<br/>
-[Bendyworks](http://bendyworks.com/)<br/>
-[Intridea](http://intridea.com/)<br/>
-[Gaslight](http://gaslight.co/home)<br/>
-
-**Other Resources**
-
-[Skip to the website (recommended)](http://pry.github.com) <br />
-[Skip to the wiki](https://github.com/pry/pry/wiki)
-</center>
-
-Pry is a powerful alternative to the standard IRB shell for Ruby. It is
-written from scratch to provide a number of advanced features,
-including:
-
-* Source code browsing (including core C source with the pry-doc gem)
-* Documentation browsing
-* Live help system
-* Open methods in editors (`edit-method Class#method`)
-* Syntax highlighting
-* Command shell integration (start editors, run git, and rake from within Pry)
-* Gist integration
-* Navigation around state (`cd`, `ls` and friends)
-* Runtime invocation (use Pry as a developer console or debugger)
-* Exotic object support (BasicObject instances, IClasses, ...)
-* A Powerful and flexible command system
-* Ability to view and replay history
-
-* Many convenience commands inspired by IPython, Smalltalk and other advanced REPLs
-* A wide-range number of [plugins](https://github.com/pry/pry/wiki/Available-plugins) that provide remote sessions, full debugging functionality, and more.
-
-Pry also aims to be more than an IRB replacement; it is an
-attempt to bring REPL driven programming to the Ruby language. It is
-currently not as powerful as tools like [SLIME](http://en.wikipedia.org/wiki/SLIME) for lisp, but that is the
-general direction Pry is heading.
-
-Pry is also fairly flexible and allows significant user
-[customization](https://github.com/pry/pry/wiki/Customization-and-configuration)
-is trivial to set it to read from any object that has a `readline` method and write to any object that has a
-`puts` method - many other aspects of Pry are also configurable making
-it a good choice for implementing custom shells.
-
-Pry comes with an executable so it can be invoked at the command line.
-Just enter `pry` to start. A `.pryrc` file in the user's home directory will
-be loaded if it exists. Type `pry --help` at the command line for more
-information.
-
-Try `gem install pry-doc` for additional documentation on Ruby Core
-methods. The additional docs are accessed through the `show-doc` and
-`show-method` commands.
-
-* Install the [gem](https://rubygems.org/gems/pry): `gem install pry`
-* Browse the comprehensive [documentation at the official Pry wiki](https://github.com/pry/pry/wiki)
-* Read the [YARD API documentation](http://rdoc.info/github/pry/pry/master/file/README.markdown)
-* See the [source code](http://github.com/pry/pry)
-
-Pry also has `rubygems-test` support; to participate, first install
-Pry, then:
-
-1. Install rubygems-test: `gem install rubygems-test`
-2. Run the test: `gem test pry`
-3. Finally choose 'Yes' to upload the results.
-
-### Commands
-
-Nearly every piece of functionality in a Pry session is implemented as
-a command. Commands are not methods and must start at the beginning of a line, with no
-whitespace in between. Commands support a flexible syntax and allow
-'options' in the same way as shell commands, for example the following
-Pry command will show a list of all private instance methods (in
-scope) that begin with 'pa'
-
-    pry(YARD::Parser::SourceParser):5> ls -Mp --grep ^pa
-    YARD::Parser::SourceParser#methods: parse  parser_class  parser_type  parser_type=  parser_type_for_filename
-
-### Navigating around state
-
-Pry allows us to pop in and out of different scopes (objects) using
-the `cd` command. This enables us to explore the run-time view of a
-program or library. To view which variables and methods are available
-within a particular scope we use the versatile [ls command.](https://gist.github.com/c0fc686ef923c8b87715)
-
-Here we will begin Pry at top-level, then Pry on a class and then on
-an instance variable inside that class:
-
-    pry(main)> class Hello
-    pry(main)*   @x = 20
-    pry(main)* end
-    => 20
-    pry(main)> cd Hello
-    pry(Hello):1> ls -i
-    instance variables: @x
-    pry(Hello):1> cd @x
-    pry(20:2)> self + 10
-    => 30
-    pry(20:2)> cd ..
-    pry(Hello):1> cd ..
-    pry(main)> cd ..
-
-The number after the `:` in the pry prompt indicates the nesting
-level. To display more information about nesting, use the `nesting`
-command. E.g
-
-    pry("friend":3)> nesting
-    Nesting status:
-    0. main (Pry top level)
-    1. Hello
-    2. 100
-    3. "friend"
-    => nil
-
-We can then jump back to any of the previous nesting levels by using
-the `jump-to` command:
-
-    pry("friend":3)> jump-to 1
-    => 100
-    pry(Hello):1>
-
-### Runtime invocation
-
-Pry can be invoked in the middle of a running program. It opens a Pry
-session at the point it's called and makes all program state at that
-point available. It can be invoked on any object using the
-`my_object.pry` syntax or on the current binding (or any binding)
-using `binding.pry`. The Pry session will then begin within the scope
-of the object (or binding). When the session ends the program continues with any
-modifications you made to it.
-
-This functionality can be used for such things as: debugging,
-implementing developer consoles and applying hot patches.
-
-code:
-
-    # test.rb
-    require 'pry'
-
-    class A
-      def hello() puts "hello world!" end
-    end
-
-    a = A.new
-
-    # start a REPL session
-    binding.pry
-
-    # program resumes here (after pry session)
-    puts "program resumes here."
-
-Pry session:
-
-    pry(main)> a.hello
-    hello world!
-    => nil
-    pry(main)> def a.goodbye
-    pry(main)*   puts "goodbye cruel world!"
-    pry(main)* end
-    => nil
-    pry(main)> a.goodbye
-    goodbye cruel world!
-    => nil
-    pry(main)> exit
-
-    program resumes here.
-
-### Command Shell Integration
-
-A line of input that begins with a '.' will be forwarded to the
-command shell. This enables us to navigate the file system, spawn
-editors, and run git and rake directly from within Pry.
-
-Further, we can use the `shell-mode` command to incorporate the
-present working directory into the Pry prompt and bring in (limited at this stage, sorry) file name completion.
-We can also interpolate Ruby code directly into the shell by
-using the normal `#{}` string interpolation syntax.
-
-In the code below we're going to switch to `shell-mode` and edit the
-`.pryrc` file in the home directory. We'll then cat its contents and
-reload the file.
-
-    pry(main)> shell-mode
-    pry main:/home/john/ruby/projects/pry $ .cd ~
-    pry main:/home/john $ .emacsclient .pryrc
-    pry main:/home/john $ .cat .pryrc
-    def hello_world
-      puts "hello world!"
-    end
-    pry main:/home/john $ load ".pryrc"
-    => true
-    pry main:/home/john $ hello_world
-    hello world!
-
-We can also interpolate Ruby code into the shell. In the
-example below we use the shell command `cat` on a random file from the
-current directory and count the number of lines in that file with
-`wc`:
-
-    pry main:/home/john $ .cat #{Dir['*.*'].sample} | wc -l
-    44
-
-### Code Browsing
-
-You can browse method source code with the `show-method` command. Nearly all Ruby methods (and some C methods, with the pry-doc
-gem) can have their source viewed. Code that is longer than a page is
-sent through a pager (such as less), and all code is properly syntax
-highlighted (even C code).
-
-The `show-method` command accepts two syntaxes, the typical ri
-`Class#method` syntax and also simply the name of a method that's in
-scope. You can optionally pass the `-l` option to show-method to
-include line numbers in the output.
-
-In the following example we will enter the `Pry` class, list the
-instance methods beginning with 're' and display the source code for the `rep` method:
-
-    pry(main)> cd Pry
-    pry(Pry)> ls -M --grep re
-    Pry#methods: re  readline  refresh  rep  repl  repl_epilogue  repl_prologue  retrieve_line
-    pry(Pry):1> show-method rep -l
-
-    From: /home/john/ruby/projects/pry/lib/pry/pry_instance.rb @ line 143:
-    Number of lines: 6
-
-    143: def rep(target=TOPLEVEL_BINDING)
-    144:   target = Pry.binding_for(target)
-    145:   result = re(target)
-    146:
-    147:   show_result(result) if should_print?
-    148: end
-
-Note that we can also view C methods (from Ruby Core) using the
-`pry-doc` plugin; we also show off the alternate syntax for
-`show-method`:
-
-    pry(main)> show-method Array#select
-
-    From: array.c in Ruby Core (C Method):
-    Number of lines: 15
-
-    static VALUE
-    rb_ary_select(VALUE ary)
-    {
-        VALUE result;
-        long i;
-
-        RETURN_ENUMERATOR(ary, 0, 0);
-        result = rb_ary_new2(RARRAY_LEN(ary));
-        for (i = 0; i < RARRAY_LEN(ary); i++) {
-        if (RTEST(rb_yield(RARRAY_PTR(ary)[i]))) {
-            rb_ary_push(result, rb_ary_elt(ary, i));
-        }
-        }
-        return result;
-    }
-
-### Documentation Browsing
-
-One use-case for Pry is to explore a program at run-time by `cd`-ing
-in and out of objects and viewing and invoking methods. In the course
-of exploring it may be useful to read the documentation for a
-specific method that you come across. Like `show-method` the `show-doc` command supports
-two syntaxes - the normal `ri` syntax as well as accepting the name of
-any method that is currently in scope.
-
-The Pry documentation system does not rely on pre-generated `rdoc` or
-`ri`, instead it grabs the comments directly above the method on
-demand. This results in speedier documentation retrieval and allows
-the Pry system to retrieve documentation for methods that would not be
-picked up by `rdoc`. Pry also has a basic understanding of both the
-rdoc and yard formats and will attempt to syntax highlight the
-documentation appropriately.
-
-Nonetheless, the `ri` functionality is very good and
-has an advantage over Pry's system in that it allows documentation
-lookup for classes as well as methods. Pry therefore has good
-integration with  `ri` through the `ri` command. The syntax
-for the command is exactly as it would be in command-line -
-so it is not necessary to quote strings.
-
-In our example we will enter the `Gem` class and view the
-documentation for the `try_activate` method:
-
-    pry(main)> cd Gem
-    pry(Gem):1> show-doc try_activate
-
-    From: /Users/john/.rvm/rubies/ruby-1.9.2-p180/lib/ruby/site_ruby/1.9.1/rubygems.rb @ line 201:
-    Number of lines: 3
-
-    Try to activate a gem containing path. Returns true if
-    activation succeeded or wasn't needed because it was already
-    activated. Returns false if it can't find the path in a gem.
-    pry(Gem):1>
-
-We can also use `ri` in the normal way:
-
-    pry(main) ri Array#each
-    ----------------------------------------------------------- Array#each
-         array.each {|item| block }   ->   array
-    ------------------------------------------------------------------------
-         Calls _block_ once for each element in _self_, passing that element
-         as a parameter.
-
-            a = [ "a", "b", "c" ]
-            a.each {|x| print x, " -- " }
-
-         produces:
-
-            a -- b -- c --
-
-### Gist integration
-
-If the `gist` gem is installed then method source or documentation can be gisted to github with the
-`gist` command.  The `gist` command is capable of gisting [almost any REPL content](https://gist.github.com/cae143e4533416529726), including methods, documentation,
-input expressions, command source, and so on. In the example below we will gist the C source
-code for the `Symbol#to_proc` method to github:
-
-    pry(main)> gist -m Symbol#to_proc
-    Gist created at https://gist.github.com/5332c38afc46d902ce46 and added to clipboard.
-    pry(main)>
-
-You can see the actual gist generated here: [https://gist.github.com/5332c38afc46d902ce46](https://gist.github.com/5332c38afc46d902ce46)
-
-### Edit methods
-
-You can use `edit-method Class#method` or `edit-method my_method`
-(if the method is in scope) to open a method for editing directly in
-your favorite editor. Pry has knowledge of a few different editors and
-will attempt to open the file at the line the method is defined.
-
-You can set the editor to use by assigning to the `Pry.editor`
-accessor. `Pry.editor` will default to `$EDITOR` or failing that will
-use `nano` as the backup default. The file that is edited will be
-automatically reloaded after exiting the editor - reloading can be
-suppressed by passing the `--no-reload` option to `edit-method`
-
-In the example below we will set our default editor to "emacsclient"
-and open the `Pry#repl` method for editing:
-
-    pry(main)> Pry.editor = "emacsclient"
-    pry(main)> edit-method Pry#repl
-
-### Live Help System
-
-Many other commands are available in Pry; to see the full list type
-`help` at the prompt. A short description of each command is provided
-with basic instructions for use; some commands have a more extensive
-help that can be accessed via typing `command_name --help`. A command
-will typically say in its description if the `--help` option is
-avaiable.
-
-### Use Pry as your Rails Console
-
-    pry -r ./config/environment
-
-MyArtChannel has kindly provided a hack to replace the `rails console` command in Rails 3: [https://gist.github.com/941174](https://gist.github.com/941174) This is not recommended for code bases with multiple developers, as they may not all want to use Pry.
-
-Also check out the [wiki](https://github.com/pry/pry/wiki/Setting-up-Rails-or-Heroku-to-use-Pry) for other strategies on integrating Pry with rails, notably the [pry-rails](https://github.com/pry/pry/wiki/Setting-up-Rails-or-Heroku-to-use-Pry#wiki-pry_rails) plugin.
-
-### Limitations:
-
-* Tab completion is currently a bit broken/limited this will have a
-  major overhaul in a future version.
-
-### Syntax Highlighting
-
-Syntax highlighting is on by default in Pry. You can toggle it on and
-off in a session by using the `toggle-color` command. Alternatively,
-you can turn it off permanently by putting the line `Pry.color =
-false` in your `~/.pryrc` file.
-
-### Future Directions
-
-Many new features are planned such as:
-
-* Increase modularity (rely more on plugin system)
-* Much improved tab completion (using [Bond](http://github.com/cldwalker/bond))
-* Much improved documentation system, better support for YARD
-* Better support for code and method reloading and saving code
-* Extended and more sophisticated command system, allowing piping
-between commands and running commands in background
-
-### Contact
-
-Problems or questions? file an issue at [github](https://github.com/pry/pry/issues)
-
-### Contributors
-
-Pry is primarily the work of [John Mair (banisterfiend)](http://github.com/banister), for full list
-of contributors see the
-[CONTRIBUTORS](https://github.com/pry/pry/blob/master/CONTRIBUTORS) file.