ansible-ruby 1.0.7 → 1.0.8

data/lib/ansible/ruby/modules/generated/network/netact/netact_cm_command.rb

@@ -43,9 +43,9 @@ module Ansible
         # @return [Object, nil] Specifies full path to plan file location for the import operation. This parameter (inputFile) or the fileName parameter must be filled. If both are present then the inputFile is used.
         attribute :inputFile
 
-        # @return [Boolean, nil] Specifies if backup plan generation is enabled.
+        # @return [Symbol, nil] Specifies if backup plan generation is enabled.
         attribute :createBackupPlan
-        validates :createBackupPlan, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :createBackupPlan, type: Symbol
 
         # @return [String, nil] Specifies a backup plan name
         attribute :backupPlanName

data/lib/ansible/ruby/modules/generated/network/netconf/netconf_config.rb

@@ -36,9 +36,9 @@ module Ansible
         attribute :confirm
         validates :confirm, type: Integer
 
-        # @return [String, nil] This argument will execute commit operation on remote device. It can be used to confirm a previous commit.
+        # @return [:yes, :no, nil] This argument will execute commit operation on remote device. It can be used to confirm a previous commit.
         attribute :confirm_commit
-        validates :confirm_commit, type: String
+        validates :confirm_commit, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [:"stop-on-error", :"continue-on-error", :"rollback-on-error", nil] This option control the netconf server action after a error is occured while editing the configuration. If the value is I(stop-on-error) abort the config edit on first error, if value is I(continue-on-error) it continues to process configuration data on error, error is recorded and negative response is generated if any errors occur. If value is C(rollback-on-error) it rollback to the original configuration in case any error occurs, this requires the remote Netconf server to support the :rollback-on-error capability.
         attribute :error_option
@@ -48,21 +48,21 @@ module Ansible
         attribute :save
         validates :save, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] It instructs the module to delete the configuration from value mentioned in C(target) datastore.
+        # @return [:yes, :no, nil] It instructs the module to delete the configuration from value mentioned in C(target) datastore.
         attribute :delete
-        validates :delete, type: String
+        validates :delete, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Boolean, nil] This boolean flag controls if the configuration changes should be committed or not after editing the candidate datastore. This option is supported only if remote Netconf server supports :candidate capability. If the value is set to I(False) commit won't be issued after edit-config operation and user needs to handle commit or discard-changes explicitly.
         attribute :commit
         validates :commit, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
 
-        # @return [Boolean, nil] This boolean flag if set validates the content of datastore given in C(target) option. For this option to work remote Netconf server shoule support :validate capability.
+        # @return [Symbol, nil] This boolean flag if set validates the content of datastore given in C(target) option. For this option to work remote Netconf server shoule support :validate capability.
         attribute :validate
-        validates :validate, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :validate, type: Symbol
 
         # @return [Object, nil] Specifies the source path to the xml file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with I(xml).
         attribute :src

data/lib/ansible/ruby/modules/generated/network/netscaler/netscaler_cs_vserver.rb

@@ -45,8 +45,9 @@ module Ansible
         attribute :stateupdate
         validates :stateupdate, inclusion: {:in=>[:enabled, :disabled], :message=>"%{value} needs to be :enabled, :disabled"}, allow_nil: true
 
-        # @return [Object, nil] Use this option to specify whether a virtual server, used for load balancing or content switching, routes requests to the cache redirection virtual server before sending it to the configured servers.
+        # @return [Symbol, nil] Use this option to specify whether a virtual server, used for load balancing or content switching, routes requests to the cache redirection virtual server before sending it to the configured servers.
         attribute :cacheable
+        validates :cacheable, type: Symbol
 
         # @return [Object, nil] URL to which traffic is redirected if the virtual server becomes unavailable. The service type of the virtual server should be either C(HTTP) or C(SSL).,Caution: Make sure that the domain in the URL does not match the domain specified for a content switching policy. If it does, requests are continuously redirected to the unavailable virtual server.,Minimum length = 1
         attribute :redirecturl
@@ -58,8 +59,9 @@ module Ansible
         attribute :precedence
         validates :precedence, inclusion: {:in=>[:RULE, :URL], :message=>"%{value} needs to be :RULE, :URL"}, allow_nil: true
 
-        # @return [Object, nil] Consider case in URLs (for policies that use URLs instead of RULES). For example, with the C(on) setting, the URLs /a/1.html and /A/1.HTML are treated differently and can have different targets (set by content switching policies). With the C(off) setting, /a/1.html and /A/1.HTML are switched to the same target.
+        # @return [Symbol, nil] Consider case in URLs (for policies that use URLs instead of RULES). For example, with the C(on) setting, the URLs /a/1.html and /A/1.HTML are treated differently and can have different targets (set by content switching policies). With the C(off) setting, /a/1.html and /A/1.HTML are switched to the same target.
         attribute :casesensitive
+        validates :casesensitive, type: Symbol
 
         # @return [:CONNECTION, :DYNAMICCONNECTION, :BANDWIDTH, :HEALTH, :NONE, nil] Type of spillover used to divert traffic to the backup virtual server when the primary virtual server reaches the spillover threshold. Connection spillover is based on the number of connections. Bandwidth spillover is based on the total Kbps of incoming and outgoing traffic.
         attribute :somethod
@@ -101,20 +103,23 @@ module Ansible
         # @return [Object, nil] Name of virtual server IP and port header, for use with the VServer IP Port Insertion parameter.,Minimum length = 1
         attribute :vipheader
 
-        # @return [Object, nil] Enable network address translation (NAT) for real-time streaming protocol (RTSP) connections.
+        # @return [Symbol, nil] Enable network address translation (NAT) for real-time streaming protocol (RTSP) connections.
         attribute :rtspnat
+        validates :rtspnat, type: Symbol
 
         # @return [Object, nil] FQDN of the authentication virtual server. The service type of the virtual server should be either C(HTTP) or C(SSL).,Minimum length = 3,Maximum length = 252
         attribute :authenticationhost
 
-        # @return [Object, nil] Authenticate users who request a connection to the content switching virtual server.
+        # @return [Symbol, nil] Authenticate users who request a connection to the content switching virtual server.
         attribute :authentication
+        validates :authentication, type: Symbol
 
         # @return [Object, nil] String specifying the listen policy for the content switching virtual server. Can be either the name of an existing expression or an in-line expression.
         attribute :listenpolicy
 
-        # @return [Object, nil] Enable HTTP 401-response based authentication.
+        # @return [Symbol, nil] Enable HTTP 401-response based authentication.
         attribute :authn401
+        validates :authn401, type: Symbol
 
         # @return [Object, nil] Name of authentication virtual server that authenticates the incoming user requests to this content switching virtual server. .,Minimum length = 1,Maximum length = 252
         attribute :authnvsname
@@ -129,8 +134,9 @@ module Ansible
         # @return [Object, nil] Expression for extracting the label from the response received from server. This string can be either an existing rule name or an inline expression. The service type of the virtual server should be either C(HTTP) or C(SSL).
         attribute :pushlabel
 
-        # @return [Object, nil] Allow multiple Web 2.0 connections from the same client to connect to the virtual server and expect updates.
+        # @return [Symbol, nil] Allow multiple Web 2.0 connections from the same client to connect to the virtual server and expect updates.
         attribute :pushmulticlients
+        validates :pushmulticlients, type: Symbol
 
         # @return [Object, nil] Name of the TCP profile containing TCP configuration settings for the virtual server.,Minimum length = 1,Maximum length = 127
         attribute :tcpprofilename
@@ -212,9 +218,9 @@ module Ansible
         # @return [Object, nil] The name of the ssl certificate that is bound to this service.,The ssl certificate must already exist.,Creating the certificate can be done with the M(netscaler_ssl_certkey) module.,This option is only applicable only when C(servicetype) is C(SSL).
         attribute :ssl_certkey
 
-        # @return [String, nil] When set to C(yes) the cs vserver will be disabled.,When set to C(no) the cs vserver will be enabled.,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
+        # @return [:yes, :no, nil] When set to C(yes) the cs vserver will be disabled.,When set to C(no) the cs vserver will be enabled.,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
         attribute :disabled
-        validates :disabled, type: String
+        validates :disabled, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/netscaler/netscaler_gslb_service.rb

@@ -35,8 +35,9 @@ module Ansible
         # @return [Object, nil] The maximum number of open connections that the service can support at any given time. A GSLB service whose connection count reaches the maximum is not considered when a GSLB decision is made, until the connection count drops below the maximum.,Minimum value = C(0),Maximum value = C(4294967294)
         attribute :maxclient
 
-        # @return [Object, nil] Monitor the health of the GSLB service.
+        # @return [Symbol, nil] Monitor the health of the GSLB service.
         attribute :healthmonitor
+        validates :healthmonitor, type: Symbol
 
         # @return [String, nil] Name of the GSLB site to which the service belongs.,Minimum length = 1
         attribute :sitename

data/lib/ansible/ruby/modules/generated/network/netscaler/netscaler_gslb_vserver.rb

@@ -99,9 +99,9 @@ module Ansible
         # @return [Object, nil] List of bindings for gslb services bound to this gslb virtual server.
         attribute :service_bindings
 
-        # @return [Boolean, nil] When set to C(yes) the GSLB Vserver state will be set to C(disabled).,When set to C(no) the GSLB Vserver state will be set to C(enabled).,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
+        # @return [Symbol, nil] When set to C(yes) the GSLB Vserver state will be set to C(disabled).,When set to C(no) the GSLB Vserver state will be set to C(enabled).,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
         attribute :disabled
-        validates :disabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :disabled, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/netscaler/netscaler_server.rb

@@ -30,9 +30,9 @@ module Ansible
         attribute :domainresolveretry
         validates :domainresolveretry, type: Integer
 
-        # @return [Boolean, nil] Support IPv6 addressing mode. If you configure a server with the IPv6 addressing mode, you cannot use the server in the IPv4 addressing mode.
+        # @return [Symbol, nil] Support IPv6 addressing mode. If you configure a server with the IPv6 addressing mode, you cannot use the server in the IPv4 addressing mode.
         attribute :ipv6address
-        validates :ipv6address, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :ipv6address, type: Symbol
 
         # @return [Object, nil] Any information about the server.
         attribute :comment
@@ -40,15 +40,16 @@ module Ansible
         # @return [Object, nil] Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.,Minimum value = C(0),Maximum value = C(4094)
         attribute :td
 
-        # @return [Object, nil] Shut down gracefully, without accepting any new connections, and disabling each service when all of its connections are closed.,This option is meaningful only when setting the I(disabled) option to C(true)
+        # @return [Symbol, nil] Shut down gracefully, without accepting any new connections, and disabling each service when all of its connections are closed.,This option is meaningful only when setting the I(disabled) option to C(true)
         attribute :graceful
+        validates :graceful, type: Symbol
 
         # @return [Object, nil] Time, in seconds, after which all the services configured on the server are disabled.,This option is meaningful only when setting the I(disabled) option to C(true)
         attribute :delay
 
-        # @return [Boolean, nil] When set to C(true) the server state will be set to C(disabled).,When set to C(false) the server state will be set to C(enabled).,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
+        # @return [Symbol, nil] When set to C(true) the server state will be set to C(disabled).,When set to C(false) the server state will be set to C(enabled).,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
         attribute :disabled
-        validates :disabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :disabled, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/netscaler/netscaler_service.rb

@@ -152,9 +152,9 @@ module Ansible
         attribute :monitor_bindings
         validates :monitor_bindings, type: TypeGeneric.new(String)
 
-        # @return [Boolean, nil] When set to C(yes) the service state will be set to DISABLED.,When set to C(no) the service state will be set to ENABLED.,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
+        # @return [Symbol, nil] When set to C(yes) the service state will be set to DISABLED.,When set to C(no) the service state will be set to ENABLED.,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
         attribute :disabled
-        validates :disabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :disabled, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/netscaler/netscaler_servicegroup.rb

@@ -27,8 +27,9 @@ module Ansible
         # @return [Object, nil] Maximum number of requests that can be sent on a persistent connection to the service group.,Note: Connection requests beyond this value are rejected.,Minimum value = C(0),Maximum value = C(65535)
         attribute :maxreq
 
-        # @return [Object, nil] Use the transparent cache redirection virtual server to forward the request to the cache server.,Note: Do not set this parameter if you set the Cache Type.
+        # @return [Symbol, nil] Use the transparent cache redirection virtual server to forward the request to the cache server.,Note: Do not set this parameter if you set the Cache Type.
         attribute :cacheable
+        validates :cacheable, type: Symbol
 
         # @return [:enabled, :disabled, nil] Insert the Client IP header in requests forwarded to the service.
         attribute :cip
@@ -46,17 +47,21 @@ module Ansible
         # @return [Object, nil] Individual Path monitoring decisions.
         attribute :pathmonitorindv
 
-        # @return [Object, nil] Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection.,Note: This parameter is available only when the Use Source IP C(usip) parameter is set to C(yes).
+        # @return [Symbol, nil] Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection.,Note: This parameter is available only when the Use Source IP C(usip) parameter is set to C(yes).
         attribute :useproxyport
+        validates :useproxyport, type: Symbol
 
-        # @return [Object, nil] Monitor the health of this service. Available settings function as follows:,C(yes) - Send probes to check the health of the service.,C(no) - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.
+        # @return [Symbol, nil] Monitor the health of this service. Available settings function as follows:,C(yes) - Send probes to check the health of the service.,C(no) - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.
         attribute :healthmonitor
+        validates :healthmonitor, type: Symbol
 
-        # @return [Object, nil] Enable surge protection for the service group.
+        # @return [Symbol, nil] Enable surge protection for the service group.
         attribute :sp
+        validates :sp, type: Symbol
 
-        # @return [Object, nil] Enable RTSP session ID mapping for the service group.
+        # @return [Symbol, nil] Enable RTSP session ID mapping for the service group.
         attribute :rtspsessionidremap
+        validates :rtspsessionidremap, type: Symbol
 
         # @return [Object, nil] Time, in seconds, after which to terminate an idle client connection.,Minimum value = C(0),Maximum value = C(31536000)
         attribute :clttimeout
@@ -64,14 +69,17 @@ module Ansible
         # @return [Object, nil] Time, in seconds, after which to terminate an idle server connection.,Minimum value = C(0),Maximum value = C(31536000)
         attribute :svrtimeout
 
-        # @return [Object, nil] Enable client keep-alive for the service group.
+        # @return [Symbol, nil] Enable client keep-alive for the service group.
         attribute :cka
+        validates :cka, type: Symbol
 
-        # @return [Object, nil] Enable TCP buffering for the service group.
+        # @return [Symbol, nil] Enable TCP buffering for the service group.
         attribute :tcpb
+        validates :tcpb, type: Symbol
 
-        # @return [Object, nil] Enable compression for the specified service.
+        # @return [Symbol, nil] Enable compression for the specified service.
         attribute :cmp
+        validates :cmp, type: Symbol
 
         # @return [Object, nil] Maximum bandwidth, in Kbps, allocated for all the services in the service group.,Minimum value = C(0),Maximum value = C(4294967287)
         attribute :maxbandwidth
@@ -106,8 +114,9 @@ module Ansible
         # @return [Object, nil] member port.
         attribute :memberport
 
-        # @return [Object, nil] Wait for all existing connections to the service to terminate before shutting down the service.
+        # @return [Symbol, nil] Wait for all existing connections to the service to terminate before shutting down the service.
         attribute :graceful
+        validates :graceful, type: Symbol
 
         # @return [Array<Hash>, Hash, nil] A list of dictionaries describing each service member of the service group.
         attribute :servicemembers
@@ -117,9 +126,9 @@ module Ansible
         attribute :monitorbindings
         validates :monitorbindings, type: TypeGeneric.new(Hash)
 
-        # @return [Boolean, nil] When set to C(yes) the service group state will be set to DISABLED.,When set to C(no) the service group state will be set to ENABLED.,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
+        # @return [Symbol, nil] When set to C(yes) the service group state will be set to DISABLED.,When set to C(no) the service group state will be set to ENABLED.,Note that due to limitations of the underlying NITRO API a C(disabled) state change alone does not cause the module result to report a changed status.
         attribute :disabled
-        validates :disabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :disabled, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/nos/nos_config.rb

@@ -38,9 +38,9 @@ module Ansible
         attribute :multiline_delimiter
         validates :multiline_delimiter, type: String
 
-        # @return [Boolean, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made. The backup file is written to the C(backup) folder in the playbook root directory. If the directory does not exist, it is created.
+        # @return [Symbol, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made. The backup file is written to the C(backup) folder in the playbook root directory. If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :backup, type: Symbol
 
         # @return [Object, nil] The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The I(running_config) argument allows the implementer to pass in the configuration to use as the base config for comparison.
         attribute :running_config

data/lib/ansible/ruby/modules/generated/network/nso/nso_show.rb

@@ -12,9 +12,9 @@ module Ansible
         attribute :path
         validates :path, presence: true, type: String
 
-        # @return [Boolean, nil] Controls whether or not operational data is included in the result.\r\n
+        # @return [Symbol, nil] Controls whether or not operational data is included in the result.\r\n
         attribute :operational
-        validates :operational, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :operational, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/nxos/nxos_bgp.rb

@@ -16,29 +16,37 @@ module Ansible
         attribute :vrf
         validates :vrf, type: String
 
-        # @return [Object, nil] Enable/Disable MED comparison on paths from different autonomous systems.
+        # @return [Symbol, nil] Enable/Disable MED comparison on paths from different autonomous systems.
         attribute :bestpath_always_compare_med
+        validates :bestpath_always_compare_med, type: Symbol
 
-        # @return [Object, nil] Enable/Disable load sharing across the providers with different (but equal-length) AS paths.
+        # @return [Symbol, nil] Enable/Disable load sharing across the providers with different (but equal-length) AS paths.
         attribute :bestpath_aspath_multipath_relax
+        validates :bestpath_aspath_multipath_relax, type: Symbol
 
-        # @return [Object, nil] Enable/Disable comparison of router IDs for identical eBGP paths.
+        # @return [Symbol, nil] Enable/Disable comparison of router IDs for identical eBGP paths.
         attribute :bestpath_compare_routerid
+        validates :bestpath_compare_routerid, type: Symbol
 
-        # @return [Object, nil] Enable/Disable neighborid. Use this when more paths available than max path config.
+        # @return [Symbol, nil] Enable/Disable neighborid. Use this when more paths available than max path config.
         attribute :bestpath_compare_neighborid
+        validates :bestpath_compare_neighborid, type: Symbol
 
-        # @return [Object, nil] Enable/Disable Ignores the cost community for BGP best-path calculations.
+        # @return [Symbol, nil] Enable/Disable Ignores the cost community for BGP best-path calculations.
         attribute :bestpath_cost_community_ignore
+        validates :bestpath_cost_community_ignore, type: Symbol
 
-        # @return [Object, nil] Enable/Disable enforcement of bestpath to do a MED comparison only between paths originated within a confederation.
+        # @return [Symbol, nil] Enable/Disable enforcement of bestpath to do a MED comparison only between paths originated within a confederation.
         attribute :bestpath_med_confed
+        validates :bestpath_med_confed, type: Symbol
 
-        # @return [Object, nil] Enable/Disable assigns the value of infinity to received routes that do not carry the MED attribute, making these routes the least desirable.
+        # @return [Symbol, nil] Enable/Disable assigns the value of infinity to received routes that do not carry the MED attribute, making these routes the least desirable.
         attribute :bestpath_med_missing_as_worst
+        validates :bestpath_med_missing_as_worst, type: Symbol
 
-        # @return [Object, nil] Enable/Disable deterministic selection of the best MED pat from among the paths from the same autonomous system.
+        # @return [Symbol, nil] Enable/Disable deterministic selection of the best MED pat from among the paths from the same autonomous system.
         attribute :bestpath_med_non_deterministic
+        validates :bestpath_med_non_deterministic, type: Symbol
 
         # @return [Object, nil] Route Reflector Cluster-ID.
         attribute :cluster_id
@@ -49,8 +57,9 @@ module Ansible
         # @return [Object, nil] AS confederation parameters.
         attribute :confederation_peers
 
-        # @return [Object, nil] Enable/Disable the batching evaluation of prefix advertisement to all peers.
+        # @return [Symbol, nil] Enable/Disable the batching evaluation of prefix advertisement to all peers.
         attribute :disable_policy_batching
+        validates :disable_policy_batching, type: Symbol
 
         # @return [Object, nil] Enable/Disable the batching evaluation of prefix advertisements to all peers with prefix list.
         attribute :disable_policy_batching_ipv4_prefix_list
@@ -58,8 +67,9 @@ module Ansible
         # @return [Object, nil] Enable/Disable the batching evaluation of prefix advertisements to all peers with prefix list.
         attribute :disable_policy_batching_ipv6_prefix_list
 
-        # @return [Object, nil] Enable/Disable enforces the neighbor autonomous system to be the first AS number listed in the AS path attribute for eBGP. On NX-OS, this property is only supported in the global BGP context.
+        # @return [Symbol, nil] Enable/Disable enforces the neighbor autonomous system to be the first AS number listed in the AS path attribute for eBGP. On NX-OS, this property is only supported in the global BGP context.
         attribute :enforce_first_as
+        validates :enforce_first_as, type: Symbol
 
         # @return [:size_small, :size_medium, :size_large, :size_disable, :default, nil] Enable/Disable cli event history buffer.
         attribute :event_history_cli
@@ -77,17 +87,21 @@ module Ansible
         attribute :event_history_periodic
         validates :event_history_periodic, inclusion: {:in=>[:size_small, :size_medium, :size_large, :size_disable, :default], :message=>"%{value} needs to be :size_small, :size_medium, :size_large, :size_disable, :default"}, allow_nil: true
 
-        # @return [Object, nil] Enable/Disable immediately reset the session if the link to a directly connected BGP peer goes down.  Only supported in the global BGP context.
+        # @return [Symbol, nil] Enable/Disable immediately reset the session if the link to a directly connected BGP peer goes down.  Only supported in the global BGP context.
         attribute :fast_external_fallover
+        validates :fast_external_fallover, type: Symbol
 
-        # @return [Object, nil] Enable/Disable flush routes in RIB upon controlled restart. On NX-OS, this property is only supported in the global BGP context.
+        # @return [Symbol, nil] Enable/Disable flush routes in RIB upon controlled restart. On NX-OS, this property is only supported in the global BGP context.
         attribute :flush_routes
+        validates :flush_routes, type: Symbol
 
-        # @return [Object, nil] Enable/Disable graceful restart.
+        # @return [Symbol, nil] Enable/Disable graceful restart.
         attribute :graceful_restart
+        validates :graceful_restart, type: Symbol
 
-        # @return [Object, nil] Enable/Disable graceful restart helper mode.
+        # @return [Symbol, nil] Enable/Disable graceful restart helper mode.
         attribute :graceful_restart_helper
+        validates :graceful_restart_helper, type: Symbol
 
         # @return [Object, nil] Set maximum time for a restart sent to the BGP peer.
         attribute :graceful_restart_timers_restart
@@ -95,20 +109,23 @@ module Ansible
         # @return [Object, nil] Set maximum time that BGP keeps the stale routes from the restarting BGP peer.
         attribute :graceful_restart_timers_stalepath_time
 
-        # @return [Object, nil] Enable/Disable isolate this router from BGP perspective.
+        # @return [Symbol, nil] Enable/Disable isolate this router from BGP perspective.
         attribute :isolate
+        validates :isolate, type: Symbol
 
         # @return [Object, nil] Local AS number to be used within a VRF instance.
         attribute :local_as
 
-        # @return [Object, nil] Enable/Disable message logging for neighbor up/down event.
+        # @return [Symbol, nil] Enable/Disable message logging for neighbor up/down event.
         attribute :log_neighbor_changes
+        validates :log_neighbor_changes, type: Symbol
 
         # @return [Object, nil] Specify Maximum number of AS numbers allowed in the AS-path attribute. Valid values are between 1 and 512.
         attribute :maxas_limit
 
-        # @return [Object, nil] Enable/Disable handle BGP neighbor down event, due to various reasons.
+        # @return [Symbol, nil] Enable/Disable handle BGP neighbor down event, due to various reasons.
         attribute :neighbor_down_fib_accelerate
+        validates :neighbor_down_fib_accelerate, type: Symbol
 
         # @return [Object, nil] The BGP reconnection interval for dropped sessions. Valid values are between 1 and 60.
         attribute :reconnect_interval
@@ -117,11 +134,13 @@ module Ansible
         attribute :router_id
         validates :router_id, type: String
 
-        # @return [Object, nil] Administratively shutdown the BGP protocol.
+        # @return [Symbol, nil] Administratively shutdown the BGP protocol.
         attribute :shutdown
+        validates :shutdown, type: Symbol
 
-        # @return [Object, nil] Enable/Disable advertise only routes programmed in hardware to peers.
+        # @return [Symbol, nil] Enable/Disable advertise only routes programmed in hardware to peers.
         attribute :suppress_fib_pending
+        validates :suppress_fib_pending, type: Symbol
 
         # @return [Object, nil] Specify timeout for the first best path after a restart, in seconds.
         attribute :timer_bestpath_limit

data/lib/ansible/ruby/modules/generated/network/nxos/nxos_bgp_af.rb

@@ -24,30 +24,35 @@ module Ansible
         attribute :safi
         validates :safi, presence: true, inclusion: {:in=>[:unicast, :multicast, :evpn], :message=>"%{value} needs to be :unicast, :multicast, :evpn"}
 
-        # @return [Object, nil] Install a backup path into the forwarding table and provide prefix independent convergence (PIC) in case of a PE-CE link failure.
+        # @return [Symbol, nil] Install a backup path into the forwarding table and provide prefix independent convergence (PIC) in case of a PE-CE link failure.
         attribute :additional_paths_install
+        validates :additional_paths_install, type: Symbol
 
-        # @return [Object, nil] Enables the receive capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.
+        # @return [Symbol, nil] Enables the receive capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.
         attribute :additional_paths_receive
+        validates :additional_paths_receive, type: Symbol
 
         # @return [Object, nil] Configures the capability of selecting additional paths for a prefix. Valid values are a string defining the name of the route-map.
         attribute :additional_paths_selection
 
-        # @return [Object, nil] Enables the send capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.
+        # @return [Symbol, nil] Enables the send capability of additional paths for all of the neighbors under this address family for which the capability has not been disabled.
         attribute :additional_paths_send
+        validates :additional_paths_send, type: Symbol
 
-        # @return [Boolean, nil] Advertise evpn routes.
+        # @return [Symbol, nil] Advertise evpn routes.
         attribute :advertise_l2vpn_evpn
-        validates :advertise_l2vpn_evpn, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :advertise_l2vpn_evpn, type: Symbol
 
-        # @return [Object, nil] Configure client-to-client route reflection.
+        # @return [Symbol, nil] Configure client-to-client route reflection.
         attribute :client_to_client
+        validates :client_to_client, type: Symbol
 
         # @return [Object, nil] Specify dampen value for IGP metric-related changes, in seconds. Valid values are integer and keyword 'default'.
         attribute :dampen_igp_metric
 
-        # @return [Object, nil] Enable/disable route-flap dampening.
+        # @return [Symbol, nil] Enable/disable route-flap dampening.
         attribute :dampening_state
+        validates :dampening_state, type: Symbol
 
         # @return [Object, nil] Specify decay half-life in minutes for route-flap dampening. Valid values are integer and keyword 'default'.
         attribute :dampening_half_time
@@ -64,8 +69,9 @@ module Ansible
         # @return [Object, nil] Specify route suppress time for route-flap dampening. Valid values are integer and keyword 'default'.
         attribute :dampening_suppress_time
 
-        # @return [Object, nil] Default information originate.
+        # @return [Symbol, nil] Default information originate.
         attribute :default_information_originate
+        validates :default_information_originate, type: Symbol
 
         # @return [Object, nil] Sets default metrics for routes redistributed into BGP. Valid values are Integer or keyword 'default'
         attribute :default_metric
@@ -97,14 +103,16 @@ module Ansible
         # @return [Object, nil] A list of redistribute directives. Multiple redistribute entries are allowed. The list must be in the form of a nested array. the first entry of each array defines the source-protocol to redistribute from; the second entry defines a route-map name. A route-map is highly advised but may be optional on some platforms, in which case it may be omitted from the array list. For example [['direct', 'rm_direct'], ['lisp', 'rm_lisp']].
         attribute :redistribute
 
-        # @return [Object, nil] Advertises only active routes to peers.
+        # @return [Symbol, nil] Advertises only active routes to peers.
         attribute :suppress_inactive
+        validates :suppress_inactive, type: Symbol
 
         # @return [Object, nil] Apply table-map to filter routes downloaded into URIB. Valid values are a string.
         attribute :table_map
 
-        # @return [Object, nil] Filters routes rejected by the route-map and does not download them to the RIB.
+        # @return [Symbol, nil] Filters routes rejected by the route-map and does not download them to the RIB.
         attribute :table_map_filter
+        validates :table_map_filter, type: Symbol
 
         # @return [:present, :absent, nil] Determines whether the config should be present or not on the device.
         attribute :state