ansible-ruby 1.0.7 → 1.0.8

data/lib/ansible/ruby/modules/generated/network/aci/aci_interface_policy_port_security.rb

@@ -16,9 +16,9 @@ module Ansible
         attribute :description
         validates :description, type: String
 
-        # @return [String, nil] Maximum number of end points.,Accepted values range between C(0) and C(12000).,The APIC defaults to C(0) when unset during creation.
+        # @return [Integer, nil] Maximum number of end points.,Accepted values range between C(0) and C(12000).,The APIC defaults to C(0) when unset during creation.
         attribute :max_end_points
-        validates :max_end_points, type: String
+        validates :max_end_points, type: Integer
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_intf_policy_l2.rb

@@ -20,8 +20,9 @@ module Ansible
         attribute :qinq
         validates :qinq, inclusion: {:in=>[:core, :disabled, :edge], :message=>"%{value} needs to be :core, :disabled, :edge"}, allow_nil: true
 
-        # @return [Object, nil] Determines if Virtual Ethernet Port Aggregator is disabled or enabled.,The APIC defaults to C(no) when unset during creation.
+        # @return [Symbol, nil] Determines if Virtual Ethernet Port Aggregator is disabled or enabled.,The APIC defaults to C(no) when unset during creation.
         attribute :vepa
+        validates :vepa, type: Symbol
 
         # @return [:global, :portlocal, nil] The scope of the VLAN.,The APIC defaults to C(global) when unset during creation.
         attribute :vlan_scope

data/lib/ansible/ruby/modules/generated/network/aci/aci_intf_policy_lldp.rb

@@ -16,13 +16,13 @@ module Ansible
         attribute :description
         validates :description, type: String
 
-        # @return [String, nil] Enable or disable Receive state.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Enable or disable Receive state.,The APIC defaults to C(yes) when unset during creation.
         attribute :receive_state
-        validates :receive_state, type: String
+        validates :receive_state, type: Symbol
 
-        # @return [String, nil] Enable or Disable Transmit state.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Enable or Disable Transmit state.,The APIC defaults to C(yes) when unset during creation.
         attribute :transmit_state
-        validates :transmit_state, type: String
+        validates :transmit_state, type: Symbol
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_intf_policy_mcp.rb

@@ -16,9 +16,9 @@ module Ansible
         attribute :description
         validates :description, type: String
 
-        # @return [String, nil] Enable or disable admin state.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Enable or disable admin state.,The APIC defaults to C(yes) when unset during creation.
         attribute :admin_state
-        validates :admin_state, type: String
+        validates :admin_state, type: Symbol
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_intf_policy_port_channel.rb

@@ -16,32 +16,37 @@ module Ansible
         attribute :description
         validates :description, type: String
 
-        # @return [String, nil] Maximum links.,Accepted values range between 1 and 16.,The APIC defaults to C(16) when unset during creation.
+        # @return [Integer, nil] Maximum links.,Accepted values range between 1 and 16.,The APIC defaults to C(16) when unset during creation.
         attribute :max_links
-        validates :max_links, type: String
+        validates :max_links, type: Integer
 
-        # @return [String, nil] Minimum links.,Accepted values range between 1 and 16.,The APIC defaults to C(1) when unset during creation.
+        # @return [Integer, nil] Minimum links.,Accepted values range between 1 and 16.,The APIC defaults to C(1) when unset during creation.
         attribute :min_links
-        validates :min_links, type: String
+        validates :min_links, type: Integer
 
         # @return [:active, :"mac-pin", :"mac-pin-nicload", :off, :passive, nil] Port channel interface policy mode.,Determines the LACP method to use for forming port-channels.,The APIC defaults to C(off) when unset during creation.
         attribute :mode
         validates :mode, inclusion: {:in=>[:active, :"mac-pin", :"mac-pin-nicload", :off, :passive], :message=>"%{value} needs to be :active, :\"mac-pin\", :\"mac-pin-nicload\", :off, :passive"}, allow_nil: true
 
-        # @return [Object, nil] Determines if Fast Select is enabled for Hot Standby Ports.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Determines if Fast Select is enabled for Hot Standby Ports.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(yes) when unset during creation.
         attribute :fast_select
+        validates :fast_select, type: Symbol
 
-        # @return [Object, nil] Determines if Graceful Convergence is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Determines if Graceful Convergence is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(yes) when unset during creation.
         attribute :graceful_convergence
+        validates :graceful_convergence, type: Symbol
 
-        # @return [Object, nil] Determines if Load Defer is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(no) when unset during creation.
+        # @return [Symbol, nil] Determines if Load Defer is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(no) when unset during creation.
         attribute :load_defer
+        validates :load_defer, type: Symbol
 
-        # @return [Object, nil] Determines if Suspend Individual is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Determines if Suspend Individual is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(yes) when unset during creation.
         attribute :suspend_individual
+        validates :suspend_individual, type: Symbol
 
-        # @return [Object, nil] Determines if Symmetric Hashing is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(no) when unset during creation.
+        # @return [Symbol, nil] Determines if Symmetric Hashing is enabled.,This makes up the LACP Policy Control Policy; if one setting is defined, then all other Control Properties left undefined or set to false will not exist after the task is ran.,The APIC defaults to C(no) when unset during creation.
         attribute :symmetric_hash
+        validates :symmetric_hash, type: Symbol
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_intf_policy_port_security.rb

@@ -16,9 +16,9 @@ module Ansible
         attribute :description
         validates :description, type: String
 
-        # @return [String, nil] Maximum number of end points.,Accepted values range between C(0) and C(12000).,The APIC defaults to C(0) when unset during creation.
+        # @return [Integer, nil] Maximum number of end points.,Accepted values range between C(0) and C(12000).,The APIC defaults to C(0) when unset during creation.
         attribute :max_end_points
-        validates :max_end_points, type: String
+        validates :max_end_points, type: Integer
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_l3out_route_tag_policy.rb

@@ -20,9 +20,9 @@ module Ansible
         attribute :tenant
         validates :tenant, presence: true, type: String
 
-        # @return [String, nil] The value of the route tag.,Accepted values range between C(0) and C(4294967295).,The APIC defaults to C(4294967295) when unset during creation.
+        # @return [Integer, nil] The value of the route tag.,Accepted values range between C(0) and C(4294967295).,The APIC defaults to C(4294967295) when unset during creation.
         attribute :tag
-        validates :tag, type: String
+        validates :tag, type: Integer
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_static_binding_to_epg.rb

@@ -27,8 +27,9 @@ module Ansible
         attribute :encap_id
         validates :encap_id, type: Integer
 
-        # @return [Object, nil] Determines the primary encapsulation ID associating the C(epg) with the interface path when using micro-segmentation.,Accepted values are any valid encap ID for specified encap, currently ranges between C(1) and C(4096).
+        # @return [Integer, nil] Determines the primary encapsulation ID associating the C(epg) with the interface path when using micro-segmentation.,Accepted values are any valid encap ID for specified encap, currently ranges between C(1) and C(4096).
         attribute :primary_encap_id
+        validates :primary_encap_id, type: Integer
 
         # @return [:immediate, :lazy, nil] The Deployement Immediacy of Static EPG on PC, VPC or Interface.,The APIC defaults to C(lazy) when unset during creation.
         attribute :deploy_immediacy
@@ -54,8 +55,9 @@ module Ansible
         attribute :interface
         validates :interface, type: String
 
-        # @return [Object, nil] The C(extpaths) integer value part of the tDn.,C(extpaths) is only used if C(interface_type) is C(fex).,Usually something like C(1011).
+        # @return [Integer, nil] The C(extpaths) integer value part of the tDn.,C(extpaths) is only used if C(interface_type) is C(fex).,Usually something like C(1011).
         attribute :extpaths
+        validates :extpaths, type: Integer
 
         # @return [:absent, :present, :query, nil] Use C(present) or C(absent) for adding or removing.,Use C(query) for listing an object or multiple objects.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/aci/aci_tenant_span_src_group.rb

@@ -8,9 +8,9 @@ module Ansible
     module Modules
       # Manage SPAN source groups on Cisco ACI fabrics.
       class Aci_tenant_span_src_group < Base
-        # @return [String, nil] Enable or disable the span sources.,The APIC defaults to C(yes) when unset during creation.
+        # @return [Symbol, nil] Enable or disable the span sources.,The APIC defaults to C(yes) when unset during creation.
         attribute :admin_state
-        validates :admin_state, type: String
+        validates :admin_state, type: Symbol
 
         # @return [String, nil] The description for Span source group.
         attribute :description

data/lib/ansible/ruby/modules/generated/network/aireos/aireos_config.rb

@@ -26,16 +26,16 @@ module Ansible
         attribute :match
         validates :match, inclusion: {:in=>[:line, :none], :message=>"%{value} needs to be :line, :none"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source.  There are times when it is not desirable to have the task get the current running-config for every task in a playbook.  The I(running_config) argument allows the implementer to pass in the configuration to use as the base config for comparison.
         attribute :running_config
 
-        # @return [String, nil] The C(save) argument instructs the module to save the running-config to startup-config.  This operation is performed after any changes are made to the current running config.  If no changes are made, the configuration is still saved to the startup config.  This option will always cause the module to return changed. This argument is mutually exclusive with I(save_when).,This option is deprecated as of Ansible 2.7, use C(save_when)
+        # @return [:yes, :no, nil] The C(save) argument instructs the module to save the running-config to startup-config.  This operation is performed after any changes are made to the current running config.  If no changes are made, the configuration is still saved to the startup config.  This option will always cause the module to return changed. This argument is mutually exclusive with I(save_when).,This option is deprecated as of Ansible 2.7, use C(save_when)
         attribute :save
-        validates :save, type: String
+        validates :save, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [:always, :never, :changed, nil] When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default.  Using this argument will change that.  If the argument is set to I(always), then the running-config will always be copied to the startup-config and the module will always return as changed. If the argument is set to I(never), the running-config will never be copied to the startup-config.  If the argument is set to I(changed), then the running-config will only be copied to the startup-config if the task has made a change.
         attribute :save_when

data/lib/ansible/ruby/modules/generated/network/aos/aos_device.rb

@@ -23,9 +23,9 @@ module Ansible
         attribute :state
         validates :state, inclusion: {:in=>[:normal], :message=>"%{value} needs to be :normal"}, allow_nil: true
 
-        # @return [String, nil] The approve argument instruct the module to convert a device in quarantine mode into approved mode.
+        # @return [:yes, :no, nil] The approve argument instruct the module to convert a device in quarantine mode into approved mode.
         attribute :approve
-        validates :approve, type: String
+        validates :approve, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Array<String>, String, nil] When approving a device using the I(approve) argument, it's possible define the location of the device.
         attribute :location

data/lib/ansible/ruby/modules/generated/network/aruba/aruba_config.rb

@@ -34,9 +34,9 @@ module Ansible
         attribute :replace
         validates :replace, inclusion: {:in=>[:line, :block], :message=>"%{value} needs to be :line, :block"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source.  There are times when it is not desirable to have the task get the current running-config for every task in a playbook.  The I(running_config) argument allows the implementer to pass in the configuration to use as the base config for comparison.
         attribute :running_config
@@ -55,9 +55,9 @@ module Ansible
         # @return [Object, nil] The C(intended_config) provides the master configuration that the node should conform to and is used to check the final running-config against.   This argument will not modify any settings on the remote device and is strictly used to check the compliance of the current device's configuration against.  When specifying this argument, the task should also modify the C(diff_against) value and set it to I(intended).
         attribute :intended_config
 
-        # @return [String, nil] This allows an Aruba controller's passwords and keys to be displayed in plain text when set to I(false) or encrypted when set to I(true). If set to I(false), the setting will re-encrypt at the end of the module run. Backups are still encrypted even when set to I(false).
+        # @return [:yes, :no, nil] This allows an Aruba controller's passwords and keys to be displayed in plain text when set to I(false) or encrypted when set to I(true). If set to I(false), the setting will re-encrypt at the end of the module run. Backups are still encrypted even when set to I(false).
         attribute :encrypt
-        validates :encrypt, type: String
+        validates :encrypt, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/asa/asa_acl.rb

@@ -27,9 +27,9 @@ module Ansible
         attribute :replace
         validates :replace, inclusion: {:in=>[:line, :block], :message=>"%{value} needs to be :line, :block"}, allow_nil: true
 
-        # @return [String, nil] The force argument instructs the module to not consider the current devices running-config.  When set to true, this will cause the module to push the contents of I(src) into the device without first checking if already configured.
+        # @return [:yes, :no, nil] The force argument instructs the module to not consider the current devices running-config.  When set to true, this will cause the module to push the contents of I(src) into the device without first checking if already configured.
         attribute :force
-        validates :force, type: String
+        validates :force, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source.  There are times when it is not desirable to have the task get the current running-config for every task in a playbook.  The I(config) argument allows the implementer to pass in the configuruation to use as the base config for comparison.
         attribute :config

data/lib/ansible/ruby/modules/generated/network/asa/asa_config.rb

@@ -33,24 +33,24 @@ module Ansible
         attribute :replace
         validates :replace, inclusion: {:in=>[:line, :block], :message=>"%{value} needs to be :line, :block"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The C(config) argument allows the playbook designer to supply the base configuration to be used to validate configuration changes necessary.  If this argument is provided, the module will not download the running-config from the remote node.
         attribute :config
 
-        # @return [String, nil] This argument specifies whether or not to collect all defaults when getting the remote device running config.  When enabled, the module will get the current config by issuing the command C(show running-config all).
+        # @return [:yes, :no, nil] This argument specifies whether or not to collect all defaults when getting the remote device running config.  When enabled, the module will get the current config by issuing the command C(show running-config all).
         attribute :defaults
-        validates :defaults, type: String
+        validates :defaults, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] This argument specifies to include passwords in the config when retrieving the running-config from the remote device.  This includes passwords related to VPN endpoints.  This argument is mutually exclusive with I(defaults).
+        # @return [:yes, :no, nil] This argument specifies to include passwords in the config when retrieving the running-config from the remote device.  This includes passwords related to VPN endpoints.  This argument is mutually exclusive with I(defaults).
         attribute :passwords
-        validates :passwords, type: String
+        validates :passwords, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] The C(save) argument instructs the module to save the running- config to the startup-config at the conclusion of the module running.  If check mode is specified, this argument is ignored.
+        # @return [:yes, :no, nil] The C(save) argument instructs the module to save the running- config to the startup-config at the conclusion of the module running.  If check mode is specified, this argument is ignored.
         attribute :save
-        validates :save, type: String
+        validates :save, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/avi/avi_actiongroupconfig.rb

@@ -24,8 +24,9 @@ module Ansible
         # @return [Object, nil] Reference of the action script configuration to be used.,It is a reference to an object of type alertscriptconfig.
         attribute :action_script_config_ref
 
-        # @return [Object, nil] Trigger notification to autoscale manager.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Trigger notification to autoscale manager.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :autoscale_trigger_notification
+        validates :autoscale_trigger_notification, type: Symbol
 
         # @return [Object, nil] User defined description for the object.
         attribute :description
@@ -33,9 +34,9 @@ module Ansible
         # @return [Object, nil] Select the email notification configuration to use when sending alerts via email.,It is a reference to an object of type alertemailconfig.
         attribute :email_config_ref
 
-        # @return [Object] Generate alert only to external destinations.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol] Generate alert only to external destinations.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :external_only
-        validates :external_only, presence: true
+        validates :external_only, presence: true, type: Symbol
 
         # @return [Object] When an alert is generated, mark its priority via the alert level.,Enum options - ALERT_LOW, ALERT_MEDIUM, ALERT_HIGH.,Default value when not specified in API or module is interpreted by Avi Controller as ALERT_LOW.
         attribute :level

data/lib/ansible/ruby/modules/generated/network/avi/avi_alertconfig.rb

@@ -28,8 +28,9 @@ module Ansible
         attribute :alert_rule
         validates :alert_rule, presence: true
 
-        # @return [Object, nil] This alert config applies to auto scale alerts.
+        # @return [Symbol, nil] This alert config applies to auto scale alerts.
         attribute :autoscale_alert
+        validates :autoscale_alert, type: Symbol
 
         # @return [Object] Determines whether an alert is raised immediately when event occurs (realtime) or after specified number of events occurs within rolling time,window.,Enum options - REALTIME, ROLLINGWINDOW, WATERMARK.,Default value when not specified in API or module is interpreted by Avi Controller as REALTIME.
         attribute :category
@@ -38,8 +39,9 @@ module Ansible
         # @return [Object, nil] A custom description field.
         attribute :description
 
-        # @return [Object, nil] Enable or disable this alert config from generating new alerts.,Default value when not specified in API or module is interpreted by Avi Controller as True.
+        # @return [Symbol, nil] Enable or disable this alert config from generating new alerts.,Default value when not specified in API or module is interpreted by Avi Controller as True.
         attribute :enabled
+        validates :enabled, type: Symbol
 
         # @return [Object, nil] An alert is expired and deleted after the expiry time has elapsed.,The original event triggering the alert remains in the event's log.,Allowed values are 1-31536000.,Default value when not specified in API or module is interpreted by Avi Controller as 86400.,Units(SEC).
         attribute :expiry_time

data/lib/ansible/ruby/modules/generated/network/avi/avi_analyticsprofile.rb

@@ -102,60 +102,68 @@ module Ansible
         # @return [Object, nil] User defined description for the object.
         attribute :description
 
-        # @return [Boolean, nil] Disable node (service engine) level analytics forvs metrics.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Disable node (service engine) level analytics forvs metrics.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :disable_se_analytics
-        validates :disable_se_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :disable_se_analytics, type: Symbol
 
-        # @return [Boolean, nil] Disable analytics on backend servers.,This may be desired in container environment when there are large number of  ephemeral servers.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Disable analytics on backend servers.,This may be desired in container environment when there are large number of  ephemeral servers.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :disable_server_analytics
-        validates :disable_server_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :disable_server_analytics, type: Symbol
 
-        # @return [Boolean, nil] Exclude client closed connection before an http request could be completed from being classified as an error.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude client closed connection before an http request could be completed from being classified as an error.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_client_close_before_request_as_error
-        validates :exclude_client_close_before_request_as_error, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :exclude_client_close_before_request_as_error, type: Symbol
 
-        # @return [Object, nil] Exclude dns policy drops from the list of errors.,Field introduced in 17.2.2.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude dns policy drops from the list of errors.,Field introduced in 17.2.2.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_dns_policy_drop_as_significant
+        validates :exclude_dns_policy_drop_as_significant, type: Symbol
 
-        # @return [Object, nil] Exclude queries to gslb services that are operationally down from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude queries to gslb services that are operationally down from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_gs_down_as_error
+        validates :exclude_gs_down_as_error, type: Symbol
 
         # @return [Object, nil] List of http status codes to be excluded from being classified as an error.,Error connections or responses impacts health score, are included as significant logs, and may be classified as part of a dos attack.
         attribute :exclude_http_error_codes
 
-        # @return [Object, nil] Exclude dns queries to domains outside the domains configured in the dns application profile from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude dns queries to domains outside the domains configured in the dns application profile from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_invalid_dns_domain_as_error
+        validates :exclude_invalid_dns_domain_as_error, type: Symbol
 
-        # @return [Object, nil] Exclude invalid dns queries from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude invalid dns queries from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_invalid_dns_query_as_error
+        validates :exclude_invalid_dns_query_as_error, type: Symbol
 
-        # @return [Object, nil] Exclude queries to domains that did not have configured services/records from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude queries to domains that did not have configured services/records from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_no_dns_record_as_error
+        validates :exclude_no_dns_record_as_error, type: Symbol
 
-        # @return [Object, nil] Exclude queries to gslb services that have no available members from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude queries to gslb services that have no available members from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_no_valid_gs_member_as_error
+        validates :exclude_no_valid_gs_member_as_error, type: Symbol
 
-        # @return [Boolean, nil] Exclude persistence server changed while load balancing' from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude persistence server changed while load balancing' from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_persistence_change_as_error
-        validates :exclude_persistence_change_as_error, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :exclude_persistence_change_as_error, type: Symbol
 
-        # @return [Object, nil] Exclude server dns error response from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude server dns error response from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_server_dns_error_as_error
+        validates :exclude_server_dns_error_as_error, type: Symbol
 
-        # @return [Boolean, nil] Exclude server tcp reset from errors.,It is common for applications like ms exchange.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude server tcp reset from errors.,It is common for applications like ms exchange.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_server_tcp_reset_as_error
-        validates :exclude_server_tcp_reset_as_error, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :exclude_server_tcp_reset_as_error, type: Symbol
 
-        # @return [Boolean, nil] Exclude 'server unanswered syns' from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude 'server unanswered syns' from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_syn_retransmit_as_error
-        validates :exclude_syn_retransmit_as_error, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :exclude_syn_retransmit_as_error, type: Symbol
 
-        # @return [Boolean, nil] Exclude tcp resets by client from the list of potential errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude tcp resets by client from the list of potential errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_tcp_reset_as_error
-        validates :exclude_tcp_reset_as_error, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :exclude_tcp_reset_as_error, type: Symbol
 
-        # @return [Object, nil] Exclude unsupported dns queries from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Exclude unsupported dns queries from the list of errors.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :exclude_unsupported_dns_query_as_error
+        validates :exclude_unsupported_dns_query_as_error, type: Symbol
 
         # @return [Integer, nil] Time window (in secs) within which only unique health change events should occur.,Default value when not specified in API or module is interpreted by Avi Controller as 1209600.
         attribute :hs_event_throttle_window

data/lib/ansible/ruby/modules/generated/network/avi/avi_applicationpersistenceprofile.rb

@@ -37,8 +37,9 @@ module Ansible
         # @return [Object, nil] Specifies the client ip persistence profile parameters.
         attribute :ip_persistence_profile
 
-        # @return [Object, nil] This field describes the object's replication scope.,If the field is set to false, then the object is visible within the controller-cluster and its associated service-engines.,If the field is set to true, then the object is replicated across the federation.,Field introduced in 17.1.3.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] This field describes the object's replication scope.,If the field is set to false, then the object is visible within the controller-cluster and its associated service-engines.,If the field is set to true, then the object is replicated across the federation.,Field introduced in 17.1.3.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :is_federated
+        validates :is_federated, type: Symbol
 
         # @return [String] A user-friendly name for the persistence profile.
         attribute :name

data/lib/ansible/ruby/modules/generated/network/avi/avi_applicationprofile.rb

@@ -38,11 +38,13 @@ module Ansible
         attribute :name
         validates :name, presence: true, type: String
 
-        # @return [Object, nil] Specifies if client ip needs to be preserved for backend connection.,Not compatible with connection multiplexing.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Specifies if client ip needs to be preserved for backend connection.,Not compatible with connection multiplexing.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :preserve_client_ip
+        validates :preserve_client_ip, type: Symbol
 
-        # @return [Object, nil] Specifies if we need to preserve client port while preseving client ip for backend connections.,Field introduced in 17.2.7.,Default value when not specified in API or module is interpreted by Avi Controller as False.
+        # @return [Symbol, nil] Specifies if we need to preserve client port while preseving client ip for backend connections.,Field introduced in 17.2.7.,Default value when not specified in API or module is interpreted by Avi Controller as False.
         attribute :preserve_client_port
+        validates :preserve_client_port, type: Symbol
 
         # @return [Object, nil] Specifies the tcp application proxy profile parameters.
         attribute :tcp_app_profile

data/lib/ansible/ruby/modules/generated/network/avi/avi_autoscalelaunchconfig.rb

@@ -45,8 +45,9 @@ module Ansible
         # @return [Object, nil] Avi controller URL of the object.
         attribute :url
 
-        # @return [Object, nil] If set to true, serverautoscalepolicy will use the autoscaling group (external_autoscaling_groups) from pool to perform scale up and scale down.,Pool should have single autoscaling group configured.,Field introduced in 17.2.3.,Default value when not specified in API or module is interpreted by Avi Controller as True.
+        # @return [Symbol, nil] If set to true, serverautoscalepolicy will use the autoscaling group (external_autoscaling_groups) from pool to perform scale up and scale down.,Pool should have single autoscaling group configured.,Field introduced in 17.2.3.,Default value when not specified in API or module is interpreted by Avi Controller as True.
         attribute :use_external_asg
+        validates :use_external_asg, type: Symbol
 
         # @return [Object, nil] Unique object identifier of the object.
         attribute :uuid