ansible-ruby 1.0.7 → 1.0.8

data/lib/ansible/ruby/modules/generated/network/f5/bigip_static_route.rb

@@ -33,8 +33,9 @@ module Ansible
         # @return [Object, nil] Specifies the pool through which the system forwards packets to the destination.
         attribute :pool
 
-        # @return [Object, nil] Specifies that the system drops packets sent to the destination.
+        # @return [Symbol, nil] Specifies that the system drops packets sent to the destination.
         attribute :reject
+        validates :reject, type: Symbol
 
         # @return [Object, nil] Specifies a specific maximum transmission unit (MTU).
         attribute :mtu

data/lib/ansible/ruby/modules/generated/network/f5/bigip_sys_global.rb

@@ -14,24 +14,29 @@ module Ansible
         # @return [Object, nil] Specifies the number of seconds of inactivity before the system logs off a user that is logged on.
         attribute :console_timeout
 
-        # @return [Boolean, nil] C(enable) or C(disabled) the Setup utility in the browser-based Configuration utility.
+        # @return [Symbol, nil] C(enable) or C(disabled) the Setup utility in the browser-based Configuration utility.
         attribute :gui_setup
-        validates :gui_setup, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :gui_setup, type: Symbol
 
-        # @return [Object, nil] Specifies, when C(enabled), that the system menu displays on the LCD screen on the front of the unit. This setting has no effect when used on the VE platform.
+        # @return [Symbol, nil] Specifies, when C(enabled), that the system menu displays on the LCD screen on the front of the unit. This setting has no effect when used on the VE platform.
         attribute :lcd_display
+        validates :lcd_display, type: Symbol
 
-        # @return [Object, nil] Specifies whether or not to enable DHCP client on the management interface
+        # @return [Symbol, nil] Specifies whether or not to enable DHCP client on the management interface
         attribute :mgmt_dhcp
+        validates :mgmt_dhcp, type: Symbol
 
-        # @return [Object, nil] Specifies, when C(enabled), that the next time you reboot the system, the system boots to an ISO image on the network, rather than an internal media drive.
+        # @return [Symbol, nil] Specifies, when C(enabled), that the next time you reboot the system, the system boots to an ISO image on the network, rather than an internal media drive.
         attribute :net_reboot
+        validates :net_reboot, type: Symbol
 
-        # @return [Object, nil] Specifies, when C(enabled), that the system suppresses informational text on the console during the boot cycle. When C(disabled), the system presents messages and informational text on the console during the boot cycle.
+        # @return [Symbol, nil] Specifies, when C(enabled), that the system suppresses informational text on the console during the boot cycle. When C(disabled), the system presents messages and informational text on the console during the boot cycle.
         attribute :quiet_boot
+        validates :quiet_boot, type: Symbol
 
-        # @return [Object, nil] Specifies whether the system displays an advisory message on the login screen.
+        # @return [Symbol, nil] Specifies whether the system displays an advisory message on the login screen.
         attribute :security_banner
+        validates :security_banner, type: Symbol
 
         # @return [:present, nil] The state of the variable on the system. When C(present), guarantees that an existing variable is set to C(value).
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigip_trunk.rb

@@ -27,9 +27,9 @@ module Ansible
         attribute :frame_distribution_hash
         validates :frame_distribution_hash, inclusion: {:in=>[:"destination-mac", :"source-destination-ip", :"source-destination-mac"], :message=>"%{value} needs to be :\"destination-mac\", :\"source-destination-ip\", :\"source-destination-mac\""}, allow_nil: true
 
-        # @return [Boolean, nil] When C(yes), specifies that the system supports the link aggregation control protocol (LACP), which monitors the trunk by exchanging control packets over the member links to determine the health of the links.,If LACP detects a failure in a member link, it removes the link from the link aggregation.,When creating a new trunk, if this parameter is not specified, LACP is C(no).,LACP is disabled by default for backward compatibility. If this does not apply to your network, we recommend that you enable LACP.
+        # @return [Symbol, nil] When C(yes), specifies that the system supports the link aggregation control protocol (LACP), which monitors the trunk by exchanging control packets over the member links to determine the health of the links.,If LACP detects a failure in a member link, it removes the link from the link aggregation.,When creating a new trunk, if this parameter is not specified, LACP is C(no).,LACP is disabled by default for backward compatibility. If this does not apply to your network, we recommend that you enable LACP.
         attribute :lacp_enabled
-        validates :lacp_enabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :lacp_enabled, type: Symbol
 
         # @return [:active, :passive, nil] Specifies the operation mode for link aggregation control protocol (LACP), if LACP is enabled for the trunk.,When creating a new trunk, if this parameter is not specified, the default is C(active).,When C(active), specifies that the system periodically sends control packets regardless of whether the partner system has issued a request.,When C(passive), specifies that the system sends control packets only when the partner system has issued a request.
         attribute :lacp_mode

data/lib/ansible/ruby/modules/generated/network/f5/bigip_tunnel.rb

@@ -39,9 +39,9 @@ module Ansible
         attribute :mtu
         validates :mtu, type: Integer
 
-        # @return [Boolean, nil] Enables or disables the tunnel to use the PMTU (Path MTU) information provided by ICMP NeedFrag error messages.,If C(yes) and the tunnel C(mtu) is set to C(0), the tunnel will use the PMTU information.,If C(yes) and the tunnel C(mtu) is fixed to a non-zero value, the tunnel will use the minimum of PMTU and MTU.,If C(no), the tunnel will use fixed MTU or calculate its MTU using tunnel encapsulation configurations.
+        # @return [Symbol, nil] Enables or disables the tunnel to use the PMTU (Path MTU) information provided by ICMP NeedFrag error messages.,If C(yes) and the tunnel C(mtu) is set to C(0), the tunnel will use the PMTU information.,If C(yes) and the tunnel C(mtu) is fixed to a non-zero value, the tunnel will use the minimum of PMTU and MTU.,If C(no), the tunnel will use fixed MTU or calculate its MTU using tunnel encapsulation configurations.
         attribute :use_pmtu
-        validates :use_pmtu, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :use_pmtu, type: Symbol
 
         # @return [String, nil] Specifies the Type of Service (TOS) value to insert in the encapsulating header of transmitted packets.,When creating a new tunnel, if this parameter is supported by the tunnel profile but not specified, the default value is C(preserve).,When C(preserve), the system copies the TOS value from the inner header to the outer header.,You may also specify a numeric value. The possible values are from C(0) to C(255).
         attribute :tos
@@ -59,8 +59,9 @@ module Ansible
         attribute :mode
         validates :mode, inclusion: {:in=>[:bidirectional, :inbound, :outbound], :message=>"%{value} needs to be :bidirectional, :inbound, :outbound"}, allow_nil: true
 
-        # @return [Object, nil] Specifies that the tunnel operates in transparent mode.,When C(yes), you can inspect and manipulate the encapsulated traffic flowing through the BIG-IP system.,A transparent tunnel terminates a tunnel while presenting the illusion that the tunnel transits the device unmodified (that is, the BIG-IP system appears as if it were an intermediate router that simply routes IP traffic through the device).
+        # @return [Symbol, nil] Specifies that the tunnel operates in transparent mode.,When C(yes), you can inspect and manipulate the encapsulated traffic flowing through the BIG-IP system.,A transparent tunnel terminates a tunnel while presenting the illusion that the tunnel transits the device unmodified (that is, the BIG-IP system appears as if it were an intermediate router that simply routes IP traffic through the device).
         attribute :transparent
+        validates :transparent, type: Symbol
 
         # @return [String, nil] Device partition to manage resources on.
         attribute :partition

data/lib/ansible/ruby/modules/generated/network/f5/bigip_ucs.rb

@@ -8,31 +8,33 @@ module Ansible
     module Modules
       # Manage upload, installation and removal of UCS files.
       class Bigip_ucs < Base
-        # @return [Object, nil] During restore of the UCS file, include chassis level configuration that is shared among boot volume sets. For example, cluster default configuration.
+        # @return [Symbol, nil] During restore of the UCS file, include chassis level configuration that is shared among boot volume sets. For example, cluster default configuration.
         attribute :include_chassis_level_config
+        validates :include_chassis_level_config, type: Symbol
 
         # @return [String, nil] The path to the UCS file to install. The parameter must be provided if the C(state) is either C(installed) or C(activated). When C(state) is C(absent), the full path for this parameter will be ignored and only the filename will be used to select a UCS for removal. Therefore you could specify C(/mickey/mouse/test.ucs) and this module would only look for C(test.ucs).
         attribute :ucs
         validates :ucs, type: String
 
-        # @return [Boolean, nil] If C(yes) will upload the file every time and replace the file on the device. If C(no), the file will only be uploaded if it does not already exist. Generally should be C(yes) only in cases where you have reason to believe that the image was corrupted during upload.
+        # @return [Symbol, nil] If C(yes) will upload the file every time and replace the file on the device. If C(no), the file will only be uploaded if it does not already exist. Generally should be C(yes) only in cases where you have reason to believe that the image was corrupted during upload.
         attribute :force
-        validates :force, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :force, type: Symbol
 
-        # @return [Boolean, nil] Performs a full restore of the UCS file and all the files it contains, with the exception of the license file. The option must be used to restore a UCS on RMA devices (Returned Materials Authorization).
+        # @return [Symbol, nil] Performs a full restore of the UCS file and all the files it contains, with the exception of the license file. The option must be used to restore a UCS on RMA devices (Returned Materials Authorization).
         attribute :no_license
-        validates :no_license, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :no_license, type: Symbol
 
-        # @return [Boolean, nil] Bypasses the platform check and allows a UCS that was created using a different platform to be installed. By default (without this option), a UCS created from a different platform is not allowed to be installed.
+        # @return [Symbol, nil] Bypasses the platform check and allows a UCS that was created using a different platform to be installed. By default (without this option), a UCS created from a different platform is not allowed to be installed.
         attribute :no_platform_check
-        validates :no_platform_check, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :no_platform_check, type: Symbol
 
-        # @return [String, nil] Specifies the passphrase that is necessary to load the specified UCS file.
+        # @return [Symbol, nil] Specifies the passphrase that is necessary to load the specified UCS file.
         attribute :passphrase
-        validates :passphrase, type: String
+        validates :passphrase, type: Symbol
 
-        # @return [Object, nil] When specified, the device and trust domain certs and keys are not loaded from the UCS. Instead, a new set is regenerated.
+        # @return [Symbol, nil] When specified, the device and trust domain certs and keys are not loaded from the UCS. Instead, a new set is regenerated.
         attribute :reset_trust
+        validates :reset_trust, type: Symbol
 
         # @return [:absent, :installed, :present, nil] When C(installed), ensures that the UCS is uploaded and installed, on the system. When C(present), ensures that the UCS is uploaded. When C(absent), the UCS will be removed from the system. When C(installed), the uploading of the UCS is idempotent, however the installation of that configuration is not idempotent.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigip_ucs_fetch.rb

@@ -8,9 +8,9 @@ module Ansible
     module Modules
       # This module is used for fetching UCS files from remote machines and storing them locally in a file tree, organized by hostname. Note that this module is written to transfer UCS files that might not be present, so a missing remote UCS won't be an error unless fail_on_missing is set to 'yes'.
       class Bigip_ucs_fetch < Base
-        # @return [Boolean, nil] Create a backup file including the timestamp information so you can get the original file back if you somehow clobbered it incorrectly.
+        # @return [Symbol, nil] Create a backup file including the timestamp information so you can get the original file back if you somehow clobbered it incorrectly.
         attribute :backup
-        validates :backup, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :backup, type: Symbol
 
         # @return [Boolean, nil] Creates the UCS based on the value of C(src) if the file does not already exist on the remote system.
         attribute :create_on_missing
@@ -23,9 +23,9 @@ module Ansible
         # @return [Object, nil] Password to use to encrypt the UCS file if desired
         attribute :encryption_password
 
-        # @return [Boolean, nil] Make the module fail if the UCS file on the remote system is missing.
+        # @return [Symbol, nil] Make the module fail if the UCS file on the remote system is missing.
         attribute :fail_on_missing
-        validates :fail_on_missing, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :fail_on_missing, type: Symbol
 
         # @return [Boolean, nil] If C(no), the file will only be transferred if the destination does not exist.
         attribute :force

data/lib/ansible/ruby/modules/generated/network/f5/bigip_vcmp_guest.rb

@@ -23,9 +23,9 @@ module Ansible
         attribute :mgmt_network
         validates :mgmt_network, inclusion: {:in=>[:bridged, :isolated, :"host only"], :message=>"%{value} needs to be :bridged, :isolated, :\"host only\""}, allow_nil: true
 
-        # @return [Boolean, nil] When C(state) is C(absent), will additionally delete the virtual disk associated with the vCMP guest. By default, this value is C(no).
+        # @return [Symbol, nil] When C(state) is C(absent), will additionally delete the virtual disk associated with the vCMP guest. By default, this value is C(no).
         attribute :delete_virtual_disk
-        validates :delete_virtual_disk, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :delete_virtual_disk, type: Symbol
 
         # @return [String, nil] Specifies the IP address, and subnet or subnet mask that you use to access the guest when you want to manage a module running within the guest. This parameter is required if the C(mgmt_network) parameter is C(bridged).,When creating a new guest, if you do not specify a network or network mask, a default of C(/24) (C(255.255.255.0)) will be assumed.
         attribute :mgmt_address

data/lib/ansible/ruby/modules/generated/network/f5/bigip_virtual_address.rb

@@ -26,8 +26,9 @@ module Ansible
         attribute :arp_state
         validates :arp_state, inclusion: {:in=>[:enabled, :disabled], :message=>"%{value} needs to be :enabled, :disabled"}, allow_nil: true
 
-        # @return [Object, nil] Specifies whether the system accepts ARP requests.,When C(no), specifies that the system does not accept ARP requests.,When C(yes), then the packets are dropped.,Note that both ARP and ICMP Echo must be disabled in order for forwarding virtual servers using that virtual address to forward ICMP packets.,When creating a new virtual address, if this parameter is not specified, the default value is C(yes).
+        # @return [Symbol, nil] Specifies whether the system accepts ARP requests.,When C(no), specifies that the system does not accept ARP requests.,When C(yes), then the packets are dropped.,Note that both ARP and ICMP Echo must be disabled in order for forwarding virtual servers using that virtual address to forward ICMP packets.,When creating a new virtual address, if this parameter is not specified, the default value is C(yes).
         attribute :arp
+        validates :arp, type: Symbol
 
         # @return [Object, nil] Specifies whether the system automatically deletes the virtual address with the deletion of the last associated virtual server. When C(disabled), specifies that the system leaves the virtual address even when all associated virtual servers have been deleted. When creating the virtual address, the default value is C(enabled).,C(enabled) and C(disabled) are deprecated and will be removed in Ansible 2.11. Instead, use known Ansible booleans such as C(yes) and C(no)
         attribute :auto_delete
@@ -44,9 +45,9 @@ module Ansible
         attribute :availability_calculation
         validates :availability_calculation, inclusion: {:in=>[:always, :when_all_available, :when_any_available], :message=>"%{value} needs to be :always, :when_all_available, :when_any_available"}, allow_nil: true
 
-        # @return [Boolean, nil] Specifies whether the system uses route advertisement for this virtual address.,When disabled, the system does not advertise routes for this virtual address.,Deprecated. Use the C(route_advertisement) parameter instead.
+        # @return [Symbol, nil] Specifies whether the system uses route advertisement for this virtual address.,When disabled, the system does not advertise routes for this virtual address.,Deprecated. Use the C(route_advertisement) parameter instead.
         attribute :use_route_advertisement
-        validates :use_route_advertisement, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :use_route_advertisement, type: Symbol
 
         # @return [:disabled, :enabled, :always, :selective, :any, :all, nil] Specifies whether the system uses route advertisement for this virtual address.,When disabled, the system does not advertise routes for this virtual address.,The majority of these options are only supported on versions 13.0.0-HF1 or higher. On versions less than this, all choices expect C(disabled) will translate to C(enabled).,When C(always), the BIG-IP system will always advertise the route for the virtual address, regardless of availability status. This requires an C(enabled) virtual address.,When C(enabled), the BIG-IP system will advertise the route for the available virtual address, based on the calculation method in the availability calculation.,When C(disabled), the BIG-IP system will not advertise the route for the virtual address, regardless of the availability status.,When C(selective), you can also selectively enable ICMP echo responses, which causes the BIG-IP system to internally enable or disable responses based on virtual server state. Either C(any) virtual server, C(all) virtual servers, or C(always), regardless of the state of any virtual server.,When C(any), the BIG-IP system will advertise the route for the virtual address when any virtual server is available.,When C(all), the BIG-IP system will advertise the route for the virtual address when all virtual servers are available.
         attribute :route_advertisement
@@ -62,8 +63,9 @@ module Ansible
         # @return [Object, nil] The route domain of the C(address) that you want to use.,This value cannot be modified after it is set.
         attribute :route_domain
 
-        # @return [Object, nil] Enables all BIG-IP systems in a device group to listen for and process traffic on the same virtual address.,Spanning for a virtual address occurs when you enable the C(spanning) option on a device and then sync the virtual address to the other members of the device group.,Spanning also relies on the upstream router to distribute application flows to the BIG-IP systems using ECMP routes. ECMP defines a route to the virtual address using distinct Floating self-IP addresses configured on each BIG-IP system.,You must also configure MAC masquerade addresses and disable C(arp) on the virtual address when Spanning is enabled.,When creating a new virtual address, if this parameter is not specified, the default valus is C(no).
+        # @return [Symbol, nil] Enables all BIG-IP systems in a device group to listen for and process traffic on the same virtual address.,Spanning for a virtual address occurs when you enable the C(spanning) option on a device and then sync the virtual address to the other members of the device group.,Spanning also relies on the upstream router to distribute application flows to the BIG-IP systems using ECMP routes. ECMP defines a route to the virtual address using distinct Floating self-IP addresses configured on each BIG-IP system.,You must also configure MAC masquerade addresses and disable C(arp) on the virtual address when Spanning is enabled.,When creating a new virtual address, if this parameter is not specified, the default valus is C(no).
         attribute :spanning
+        validates :spanning, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/f5/bigip_virtual_server.rb

@@ -76,11 +76,13 @@ module Ansible
         attribute :metadata
         validates :metadata, type: Hash
 
-        # @return [Object, nil] Specifies, when C(enabled), that the system translates the address of the virtual server.,When C(disabled), specifies that the system uses the address without translation.,This option is useful when the system is load balancing devices that have the same IP address.,When creating a new virtual server, the default is C(enabled).
+        # @return [Symbol, nil] Specifies, when C(enabled), that the system translates the address of the virtual server.,When C(disabled), specifies that the system uses the address without translation.,This option is useful when the system is load balancing devices that have the same IP address.,When creating a new virtual server, the default is C(enabled).
         attribute :address_translation
+        validates :address_translation, type: Symbol
 
-        # @return [Object, nil] Specifies, when C(enabled), that the system translates the port of the virtual server.,When C(disabled), specifies that the system uses the port without translation. Turning off port translation for a virtual server is useful if you want to use the virtual server to load balance connections to any service.,When creating a new virtual server, the default is C(enabled).
+        # @return [Symbol, nil] Specifies, when C(enabled), that the system translates the port of the virtual server.,When C(disabled), specifies that the system uses the port without translation. Turning off port translation for a virtual server is useful if you want to use the virtual server to load balance connections to any service.,When creating a new virtual server, the default is C(enabled).
         attribute :port_translation
+        validates :port_translation, type: Symbol
 
         # @return [:ah, :bna, :esp, :etherip, :gre, :icmp, :ipencap, :ipv6, :"ipv6-auth", :"ipv6-crypt", :"ipv6-icmp", :"isp-ip", :mux, :ospf, :sctp, :tcp, :udp, :udplite, nil] Specifies a network protocol name you want the system to use to direct traffic on this virtual server.,When creating a new virtual server, if this parameter is not specified, the default is C(tcp).,The Protocol setting is not available when you select Performance (HTTP) as the Type.,The value of this argument can be specified in either it's numeric value, or, for convenience, in a select number of named values. Refer to C(choices) for examples.,For a list of valid IP protocol numbers, refer to this page https://en.wikipedia.org/wiki/List_of_IP_protocol_numbers,When C(type) is C(dhcp), this module will force the C(ip_protocol) parameter to be C(17) (UDP).
         attribute :ip_protocol

data/lib/ansible/ruby/modules/generated/network/f5/bigip_vlan.rb

@@ -41,8 +41,9 @@ module Ansible
         attribute :dag_tunnel
         validates :dag_tunnel, inclusion: {:in=>[:inner, :outer], :message=>"%{value} needs to be :inner, :outer"}, allow_nil: true
 
-        # @return [Object, nil] Specifies whether some of the stateless traffic on the VLAN should be disaggregated in a round-robin order instead of using a static hash. The stateless traffic includes non-IP L2 traffic, ICMP, some UDP protocols, and so on.,When creating a new VLAN, if this parameter is not specified, the default of (no) is used.
+        # @return [Symbol, nil] Specifies whether some of the stateless traffic on the VLAN should be disaggregated in a round-robin order instead of using a static hash. The stateless traffic includes non-IP L2 traffic, ICMP, some UDP protocols, and so on.,When creating a new VLAN, if this parameter is not specified, the default of (no) is used.
         attribute :dag_round_robin
+        validates :dag_round_robin, type: Symbol
 
         # @return [String, nil] Device partition to manage resources on.
         attribute :partition

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_application_fasthttp.rb

@@ -28,9 +28,9 @@ module Ansible
         attribute :service_environment
         validates :service_environment, type: String
 
-        # @return [Boolean, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
+        # @return [Symbol, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
         attribute :add_analytics
-        validates :add_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :add_analytics, type: Symbol
 
         # @return [:absent, :present, nil] The state of the resource on the system.,When C(present), guarantees that the resource exists with the provided attributes.,When C(absent), removes the resource from the system.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_application_fastl4_tcp.rb

@@ -28,9 +28,9 @@ module Ansible
         attribute :service_environment
         validates :service_environment, type: String
 
-        # @return [Boolean, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
+        # @return [Symbol, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
         attribute :add_analytics
-        validates :add_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :add_analytics, type: Symbol
 
         # @return [:absent, :present, nil] The state of the resource on the system.,When C(present), guarantees that the resource exists with the provided attributes.,When C(absent), removes the resource from the system.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_application_fastl4_udp.rb

@@ -28,9 +28,9 @@ module Ansible
         attribute :service_environment
         validates :service_environment, type: String
 
-        # @return [Boolean, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
+        # @return [Symbol, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
         attribute :add_analytics
-        validates :add_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :add_analytics, type: Symbol
 
         # @return [:absent, :present, nil] The state of the resource on the system.,When C(present), guarantees that the resource exists with the provided attributes.,When C(absent), removes the resource from the system.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_application_http.rb

@@ -28,9 +28,9 @@ module Ansible
         attribute :service_environment
         validates :service_environment, type: String
 
-        # @return [Boolean, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
+        # @return [Symbol, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
         attribute :add_analytics
-        validates :add_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :add_analytics, type: Symbol
 
         # @return [:absent, :present, nil] The state of the resource on the system.,When C(present), guarantees that the resource exists with the provided attributes.,When C(absent), removes the resource from the system.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_application_https_offload.rb

@@ -35,9 +35,9 @@ module Ansible
         attribute :service_environment
         validates :service_environment, type: String
 
-        # @return [Boolean, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
+        # @return [Symbol, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
         attribute :add_analytics
-        validates :add_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :add_analytics, type: Symbol
 
         # @return [:absent, :present, nil] The state of the resource on the system.,When C(present), guarantees that the resource exists with the provided attributes.,When C(absent), removes the resource from the system.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_application_https_waf.rb

@@ -35,9 +35,9 @@ module Ansible
         attribute :service_environment
         validates :service_environment, type: String
 
-        # @return [Boolean, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
+        # @return [Symbol, nil] Collects statistics of the BIG-IP that the application is deployed to.,This parameter is only relevant when specifying a C(service_environment) which is a BIG-IP; not an SSG.
         attribute :add_analytics
-        validates :add_analytics, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :add_analytics, type: Symbol
 
         # @return [Object, nil] Specifies host names that are used to access the web application that this security policy protects.,When creating a new application, this parameter is required.
         attribute :domain_names

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_regkey_license.rb

@@ -19,9 +19,9 @@ module Ansible
         # @return [Object, nil] Description of the license.
         attribute :description
 
-        # @return [Boolean, nil] A key that signifies that you accept the F5 EULA for this license.,A copy of the EULA can be found here https://askf5.f5.com/csp/article/K12902,This is required when C(state) is C(present).
+        # @return [Symbol, nil] A key that signifies that you accept the F5 EULA for this license.,A copy of the EULA can be found here https://askf5.f5.com/csp/article/K12902,This is required when C(state) is C(present).
         attribute :accept_eula
-        validates :accept_eula, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :accept_eula, type: Symbol
 
         # @return [:absent, :present, nil] The state of the regkey license in the pool on the system.,When C(present), guarantees that the license exists in the pool.,When C(absent), removes the license from the pool.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_regkey_license_assignment.rb

@@ -20,9 +20,9 @@ module Ansible
         attribute :device
         validates :device, type: String
 
-        # @return [FalseClass, TrueClass, nil] Whether the specified device is a managed or un-managed device.,When C(state) is C(present), this parameter is required.
+        # @return [Symbol, nil] Whether the specified device is a managed or un-managed device.,When C(state) is C(present), this parameter is required.
         attribute :managed
-        validates :managed, type: MultipleTypes.new(FalseClass, TrueClass)
+        validates :managed, type: Symbol
 
         # @return [Integer, nil] Specifies the port of the remote device to connect to.,If this parameter is not specified, the default of C(443) will be used.
         attribute :device_port

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_utility_license.rb

@@ -12,9 +12,9 @@ module Ansible
         attribute :license_key
         validates :license_key, presence: true, type: String
 
-        # @return [Boolean, nil] A key that signifies that you accept the F5 EULA for this license.,A copy of the EULA can be found here https://askf5.f5.com/csp/article/K12902,This is required when C(state) is C(present).
+        # @return [Symbol, nil] A key that signifies that you accept the F5 EULA for this license.,A copy of the EULA can be found here https://askf5.f5.com/csp/article/K12902,This is required when C(state) is C(present).
         attribute :accept_eula
-        validates :accept_eula, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :accept_eula, type: Symbol
 
         # @return [:absent, :present, nil] The state of the utility license on the system.,When C(present), guarantees that the license exists.,When C(absent), removes the license from the system.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/f5/bigiq_utility_license_assignment.rb

@@ -24,9 +24,9 @@ module Ansible
         attribute :device
         validates :device, type: String
 
-        # @return [FalseClass, TrueClass, nil] Whether the specified device is a managed or un-managed device.,When C(state) is C(present), this parameter is required.
+        # @return [Symbol, nil] Whether the specified device is a managed or un-managed device.,When C(state) is C(present), this parameter is required.
         attribute :managed
-        validates :managed, type: MultipleTypes.new(FalseClass, TrueClass)
+        validates :managed, type: Symbol
 
         # @return [Integer, nil] Specifies the port of the remote device to connect to.,If this parameter is not specified, the default of C(443) will be used.
         attribute :device_port

data/lib/ansible/ruby/modules/generated/network/fortios/fortios_ipv4_policy.rb

@@ -28,17 +28,17 @@ module Ansible
         attribute :src_addr
         validates :src_addr, type: TypeGeneric.new(String)
 
-        # @return [Boolean, nil] Negate source address param.
+        # @return [Symbol, nil] Negate source address param.
         attribute :src_addr_negate
-        validates :src_addr_negate, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :src_addr_negate, type: Symbol
 
         # @return [String, nil] Specifies destination address (or group) object name(s). Required when I(state=present).
         attribute :dst_addr
         validates :dst_addr, type: String
 
-        # @return [Boolean, nil] Negate destination address param.
+        # @return [Symbol, nil] Negate destination address param.
         attribute :dst_addr_negate
-        validates :dst_addr_negate, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :dst_addr_negate, type: Symbol
 
         # @return [:accept, :deny, nil] Specifies accept or deny action policy. Required when I(state=present).
         attribute :policy_action
@@ -48,21 +48,21 @@ module Ansible
         attribute :service
         validates :service, type: String
 
-        # @return [Boolean, nil] Negate policy service(s) defined in service value.
+        # @return [Symbol, nil] Negate policy service(s) defined in service value.
         attribute :service_negate
-        validates :service_negate, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :service_negate, type: Symbol
 
         # @return [String, nil] defines policy schedule.
         attribute :schedule
         validates :schedule, type: String
 
-        # @return [Boolean, nil] Enable or disable Nat.
+        # @return [Symbol, nil] Enable or disable Nat.
         attribute :nat
-        validates :nat, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :nat, type: Symbol
 
-        # @return [Boolean, nil] Use fixed port for nat.
+        # @return [Symbol, nil] Use fixed port for nat.
         attribute :fixedport
-        validates :fixedport, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :fixedport, type: Symbol
 
         # @return [Object, nil] Specifies NAT pool name.
         attribute :poolname
@@ -83,9 +83,9 @@ module Ansible
         attribute :logtraffic
         validates :logtraffic, inclusion: {:in=>[:disable, :utm, :all], :message=>"%{value} needs to be :disable, :utm, :all"}, allow_nil: true
 
-        # @return [Boolean, nil] Logs beginning of session as well.
+        # @return [Symbol, nil] Logs beginning of session as well.
         attribute :logtraffic_start
-        validates :logtraffic_start, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :logtraffic_start, type: Symbol
 
         # @return [String, nil] free text to describe policy.
         attribute :comment

data/lib/ansible/ruby/modules/generated/network/illumos/dladm_etherstub.rb

@@ -12,9 +12,9 @@ module Ansible
         attribute :name
         validates :name, presence: true, type: String
 
-        # @return [Boolean, nil] Specifies that the etherstub is temporary. Temporary etherstubs do not persist across reboots.
+        # @return [Symbol, nil] Specifies that the etherstub is temporary. Temporary etherstubs do not persist across reboots.
         attribute :temporary
-        validates :temporary, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :temporary, type: Symbol
 
         # @return [:present, :absent, nil] Create or delete Solaris/illumos etherstub.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/illumos/dladm_linkprop.rb

@@ -20,9 +20,9 @@ module Ansible
         attribute :value
         validates :value, type: String
 
-        # @return [Boolean, nil] Specifies that lin property configuration is temporary. Temporary link property configuration does not persist across reboots.
+        # @return [Symbol, nil] Specifies that lin property configuration is temporary. Temporary link property configuration does not persist across reboots.
         attribute :temporary
-        validates :temporary, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :temporary, type: Symbol
 
         # @return [:present, :absent, :reset, nil] Set or reset the property value.
         attribute :state