ansible-ruby 1.0.7 → 1.0.8

data/lib/ansible/ruby/modules/generated/network/illumos/dladm_vnic.rb

@@ -16,9 +16,9 @@ module Ansible
         attribute :link
         validates :link, presence: true, type: String
 
-        # @return [Boolean, nil] Specifies that the VNIC is temporary. Temporary VNICs do not persist across reboots.
+        # @return [Symbol, nil] Specifies that the VNIC is temporary. Temporary VNICs do not persist across reboots.
         attribute :temporary
-        validates :temporary, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :temporary, type: Symbol
 
         # @return [Boolean, nil] Sets the VNIC's MAC address. Must be valid unicast MAC address.
         attribute :mac

data/lib/ansible/ruby/modules/generated/network/illumos/flowadm.rb

@@ -42,9 +42,9 @@ module Ansible
         attribute :priority
         validates :priority, inclusion: {:in=>[:low, :medium, :high], :message=>"%{value} needs to be :low, :medium, :high"}, allow_nil: true
 
-        # @return [Boolean, nil] Specifies that the configured flow is temporary. Temporary flows do not persist across reboots.
+        # @return [Symbol, nil] Specifies that the configured flow is temporary. Temporary flows do not persist across reboots.
         attribute :temporary
-        validates :temporary, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :temporary, type: Symbol
 
         # @return [:absent, :present, :resetted, nil] Create/delete/enable/disable an IP address on the network interface.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/illumos/ipadm_if.rb

@@ -12,9 +12,9 @@ module Ansible
         attribute :name
         validates :name, presence: true, type: String
 
-        # @return [Boolean, nil] Specifies that the IP interface is temporary. Temporary IP interfaces do not persist across reboots.
+        # @return [Symbol, nil] Specifies that the IP interface is temporary. Temporary IP interfaces do not persist across reboots.
         attribute :temporary
-        validates :temporary, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :temporary, type: Symbol
 
         # @return [:present, :absent, :enabled, :disabled, nil] Create or delete Solaris/illumos IP interfaces.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/illumos/ipadm_prop.rb

@@ -20,9 +20,9 @@ module Ansible
         attribute :value
         validates :value, type: String
 
-        # @return [Boolean, nil] Specifies that the property value is temporary. Temporary property values do not persist across reboots.
+        # @return [Symbol, nil] Specifies that the property value is temporary. Temporary property values do not persist across reboots.
         attribute :temporary
-        validates :temporary, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :temporary, type: Symbol
 
         # @return [:present, :absent, :reset, nil] Set or reset the property value.
         attribute :state

data/lib/ansible/ruby/modules/generated/network/ios/ios_config.rb

@@ -38,24 +38,24 @@ module Ansible
         attribute :multiline_delimiter
         validates :multiline_delimiter, type: String
 
-        # @return [String, nil] The force argument instructs the module to not consider the current devices running-config.  When set to true, this will cause the module to push the contents of I(src) into the device without first checking if already configured.,Note this argument should be considered deprecated.  To achieve the equivalent, set the C(match=none) which is idempotent.  This argument will be removed in Ansible 2.6.
+        # @return [:yes, :no, nil] The force argument instructs the module to not consider the current devices running-config.  When set to true, this will cause the module to push the contents of I(src) into the device without first checking if already configured.,Note this argument should be considered deprecated.  To achieve the equivalent, set the C(match=none) which is idempotent.  This argument will be removed in Ansible 2.6.
         attribute :force
-        validates :force, type: String
+        validates :force, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source.  There are times when it is not desirable to have the task get the current running-config for every task in a playbook.  The I(running_config) argument allows the implementer to pass in the configuration to use as the base config for comparison.
         attribute :running_config
 
-        # @return [String, nil] This argument specifies whether or not to collect all defaults when getting the remote device running config.  When enabled, the module will get the current config by issuing the command C(show running-config all).
+        # @return [:yes, :no, nil] This argument specifies whether or not to collect all defaults when getting the remote device running config.  When enabled, the module will get the current config by issuing the command C(show running-config all).
         attribute :defaults
-        validates :defaults, type: String
+        validates :defaults, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] The C(save) argument instructs the module to save the running- config to the startup-config at the conclusion of the module running.  If check mode is specified, this argument is ignored.,This option is deprecated as of Ansible 2.4 and will be removed in Ansible 2.8, use C(save_when) instead.
+        # @return [:yes, :no, nil] The C(save) argument instructs the module to save the running- config to the startup-config at the conclusion of the module running.  If check mode is specified, this argument is ignored.,This option is deprecated as of Ansible 2.4 and will be removed in Ansible 2.8, use C(save_when) instead.
         attribute :save
-        validates :save, type: String
+        validates :save, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [:always, :never, :modified, :changed, nil] When changes are made to the device running-configuration, the changes are not copied to non-volatile storage by default.  Using this argument will change that before.  If the argument is set to I(always), then the running-config will always be copied to the startup-config and the I(modified) flag will always be set to True.  If the argument is set to I(modified), then the running-config will only be copied to the startup-config if it has changed since the last save to startup-config.  If the argument is set to I(never), the running-config will never be copied to the startup-config.  If the argument is set to I(changed), then the running-config will only be copied to the startup-config if the task has made a change. I(changed) was added in Ansible 2.5.
         attribute :save_when

data/lib/ansible/ruby/modules/generated/network/ios/ios_system.rb

@@ -24,9 +24,9 @@ module Ansible
         attribute :lookup_source
         validates :lookup_source, type: String
 
-        # @return [Boolean, nil] Administrative control for enabling or disabling DNS lookups.  When this argument is set to True, lookups are performed and when it is set to False, lookups are not performed.
+        # @return [Symbol, nil] Administrative control for enabling or disabling DNS lookups.  When this argument is set to True, lookups are performed and when it is set to False, lookups are not performed.
         attribute :lookup_enabled
-        validates :lookup_enabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :lookup_enabled, type: Symbol
 
         # @return [Array<String>, String, nil] List of DNS name servers by IP address to use to perform name resolution lookups.  This argument accepts either a list of DNS servers See examples.
         attribute :name_servers

data/lib/ansible/ruby/modules/generated/network/ios/ios_user.rb

@@ -36,13 +36,13 @@ module Ansible
         attribute :sshkey
         validates :sshkey, type: String
 
-        # @return [Boolean, nil] Defines the username without assigning a password. This will allow the user to login to the system without being authenticated by a password.
+        # @return [Symbol, nil] Defines the username without assigning a password. This will allow the user to login to the system without being authenticated by a password.
         attribute :nopassword
-        validates :nopassword, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :nopassword, type: Symbol
 
-        # @return [Boolean, nil] Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user (the current defined set of users).
+        # @return [Symbol, nil] Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user (the current defined set of users).
         attribute :purge
-        validates :purge, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :purge, type: Symbol
 
         # @return [:present, :absent, nil] Configures the state of the username definition as it relates to the device operational configuration. When set to I(present), the username(s) should be configured in the device active configuration and when set to I(absent) the username(s) should not be in the device active configuration
         attribute :state

data/lib/ansible/ruby/modules/generated/network/iosxr/iosxr_config.rb

@@ -34,24 +34,24 @@ module Ansible
         attribute :replace
         validates :replace, inclusion: {:in=>[:line, :block, :config], :message=>"%{value} needs to be :line, :block, :config"}, allow_nil: true
 
-        # @return [String, nil] The force argument instructs the module to not consider the current devices running-config.  When set to true, this will cause the module to push the contents of I(src) into the device without first checking if already configured.,Note this argument should be considered deprecated.  To achieve the equivalent, set the C(match=none) which is idempotent.  This argument will be removed in a future release.
+        # @return [:yes, :no, nil] The force argument instructs the module to not consider the current devices running-config.  When set to true, this will cause the module to push the contents of I(src) into the device without first checking if already configured.,Note this argument should be considered deprecated.  To achieve the equivalent, set the C(match=none) which is idempotent.  This argument will be removed in a future release.
         attribute :force
-        validates :force, type: String
+        validates :force, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source.  There are times when it is not desirable to have the task get the current running-config for every task in a playbook.  The I(config) argument allows the implementer to pass in the configuration to use as the base config for comparison.
         attribute :config
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [String, nil] Allows a commit description to be specified to be included when the configuration is committed.  If the configuration is not changed or committed, this argument is ignored.
         attribute :comment
         validates :comment, type: String
 
-        # @return [String, nil] Enters into administration configuration mode for making config changes to the device.
+        # @return [:yes, :no, nil] Enters into administration configuration mode for making config changes to the device.
         attribute :admin
-        validates :admin, type: String
+        validates :admin, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] Allows a commit label to be specified to be included when the configuration is committed. A valid label must begin with an alphabet and not exceed 30 characters, only alphabets, digits, hyphens and underscores are allowed. If the configuration is not changed or committed, this argument is ignored.
         attribute :label

data/lib/ansible/ruby/modules/generated/network/iosxr/iosxr_system.rb

@@ -27,9 +27,9 @@ module Ansible
         attribute :lookup_source
         validates :lookup_source, type: String
 
-        # @return [Boolean, nil] Provides administrative control for enabling or disabling DNS lookups.  When this argument is set to True, lookups are performed and when it is set to False, lookups are not performed.
+        # @return [Symbol, nil] Provides administrative control for enabling or disabling DNS lookups.  When this argument is set to True, lookups are performed and when it is set to False, lookups are not performed.
         attribute :lookup_enabled
-        validates :lookup_enabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :lookup_enabled, type: Symbol
 
         # @return [Array<String>, String, nil] The C(name_serves) argument accepts a list of DNS name servers by way of either FQDN or IP address to use to perform name resolution lookups.  This argument accepts wither a list of DNS servers See examples.
         attribute :name_servers

data/lib/ansible/ruby/modules/generated/network/iosxr/iosxr_user.rb

@@ -32,9 +32,9 @@ module Ansible
         attribute :groups
         validates :groups, type: TypeGeneric.new(String)
 
-        # @return [Boolean, nil] Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user and the current defined set of users.
+        # @return [Symbol, nil] Instructs the module to consider the resource definition absolute. It will remove any previously configured usernames on the device with the exception of the `admin` user and the current defined set of users.
         attribute :purge
-        validates :purge, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :purge, type: Symbol
 
         # @return [:present, :absent, nil] Configures the state of the username definition as it relates to the device operational configuration. When set to I(present), the username(s) should be configured in the device active configuration and when set to I(absent) the username(s) should not be in the device active configuration
         attribute :state

data/lib/ansible/ruby/modules/generated/network/ironware/ironware_config.rb

@@ -41,9 +41,9 @@ module Ansible
         attribute :commit
         validates :commit, inclusion: {:in=>[:merge, :check], :message=>"%{value} needs to be :merge, :check"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory.  If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [Object, nil] The C(config) argument allows the playbook designer to supply the base configuration to be used to validate configuration changes necessary.  If this argument is provided, the module will not download the running-config from the remote node.
         attribute :config

data/lib/ansible/ruby/modules/generated/network/junos/junos_banner.rb

@@ -20,9 +20,9 @@ module Ansible
         attribute :state
         validates :state, inclusion: {:in=>[:present, :absent], :message=>"%{value} needs to be :present, :absent"}, allow_nil: true
 
-        # @return [String, nil] Specifies whether or not the configuration is active or deactivated
+        # @return [:yes, :no, nil] Specifies whether or not the configuration is active or deactivated
         attribute :active
-        validates :active, type: String
+        validates :active, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/junos/junos_config.rb

@@ -36,21 +36,21 @@ module Ansible
         attribute :comment
         validates :comment, type: String
 
-        # @return [String, nil] The C(replace) argument will instruct the remote device to replace the current configuration hierarchy with the one specified in the corresponding hierarchy of the source configuration loaded from this module.,Note this argument should be considered deprecated.  To achieve the equivalent, set the I(update) argument to C(replace). This argument will be removed in a future release. The C(replace) and C(update) argument is mutually exclusive.
+        # @return [:yes, :no, nil] The C(replace) argument will instruct the remote device to replace the current configuration hierarchy with the one specified in the corresponding hierarchy of the source configuration loaded from this module.,Note this argument should be considered deprecated.  To achieve the equivalent, set the I(update) argument to C(replace). This argument will be removed in a future release. The C(replace) and C(update) argument is mutually exclusive.
         attribute :replace
-        validates :replace, type: String
+        validates :replace, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
+        # @return [:yes, :no, nil] This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made.  The backup file is written to the C(backup) folder in the playbook root directory or role root directory, if playbook is part of an ansible role. If the directory does not exist, it is created.
         attribute :backup
-        validates :backup, type: String
+        validates :backup, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [:merge, :override, :replace, nil] This argument will decide how to load the configuration data particulary when the candidate configuration and loaded configuration contain conflicting statements. Following are accepted values. C(merge) combines the data in the loaded configuration with the candidate configuration. If statements in the loaded configuration conflict with statements in the candidate configuration, the loaded statements replace the candidate ones. C(override) discards the entire candidate configuration and replaces it with the loaded configuration. C(replace) substitutes each hierarchy level in the loaded configuration for the corresponding level.
         attribute :update
         validates :update, inclusion: {:in=>[:merge, :override, :replace], :message=>"%{value} needs to be :merge, :override, :replace"}, allow_nil: true
 
-        # @return [String, nil] This argument will execute commit operation on remote device. It can be used to confirm a previous commit.
+        # @return [:yes, :no, nil] This argument will execute commit operation on remote device. It can be used to confirm a previous commit.
         attribute :confirm_commit
-        validates :confirm_commit, type: String
+        validates :confirm_commit, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/junos/junos_package.rb

@@ -15,21 +15,21 @@ module Ansible
         # @return [Object, nil] The I(version) argument can be used to explicitly specify the version of the package that should be installed on the remote device.  If the I(version) argument is not specified, then the version is extracts from the I(src) filename.
         attribute :version
 
-        # @return [String] In order for a package to take effect, the remote device must be restarted.  When enabled, this argument will instruct the module to reboot the device once the updated package has been installed. If disabled or the remote package does not need to be changed, the device will not be started.
+        # @return [:yes, :no] In order for a package to take effect, the remote device must be restarted.  When enabled, this argument will instruct the module to reboot the device once the updated package has been installed. If disabled or the remote package does not need to be changed, the device will not be started.
         attribute :reboot
-        validates :reboot, presence: true, type: String
+        validates :reboot, presence: true, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}
 
-        # @return [String, nil] The I(no_copy) argument is responsible for instructing the remote device on where to install the package from.  When enabled, the package is transferred to the remote device prior to installing.
+        # @return [:yes, :no, nil] The I(no_copy) argument is responsible for instructing the remote device on where to install the package from.  When enabled, the package is transferred to the remote device prior to installing.
         attribute :no_copy
-        validates :no_copy, type: String
+        validates :no_copy, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] The I(validate) argument is responsible for instructing the remote device to skip checking the current device configuration compatibility with the package being installed. When set to false validation is not performed.
+        # @return [:yes, :no, nil] The I(validate) argument is responsible for instructing the remote device to skip checking the current device configuration compatibility with the package being installed. When set to false validation is not performed.
         attribute :validate
-        validates :validate, type: String
+        validates :validate, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String] The I(force) argument instructs the module to bypass the package version check and install the packaged identified in I(src) on the remote device.
+        # @return [:yes, :no] The I(force) argument instructs the module to bypass the package version check and install the packaged identified in I(src) on the remote device.
         attribute :force
-        validates :force, presence: true, type: String
+        validates :force, presence: true, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/junos/junos_scp.rb

@@ -16,13 +16,13 @@ module Ansible
         attribute :dest
         validates :dest, type: String
 
-        # @return [String, nil] The C(recursive) argument enables recursive transfer of files and directories.
+        # @return [:yes, :no, nil] The C(recursive) argument enables recursive transfer of files and directories.
         attribute :recursive
-        validates :recursive, type: String
+        validates :recursive, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
-        # @return [String, nil] The C(remote_src) argument enables the download of files (I(scp get)) from the remote device. The default behavior is to upload files (I(scp put)) to the remote device.
+        # @return [:yes, :no, nil] The C(remote_src) argument enables the download of files (I(scp get)) from the remote device. The default behavior is to upload files (I(scp put)) to the remote device.
         attribute :remote_src
-        validates :remote_src, type: String
+        validates :remote_src, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/junos/junos_user.rb

@@ -27,17 +27,17 @@ module Ansible
         attribute :sshkey
         validates :sshkey, type: String
 
-        # @return [String, nil] The C(purge) argument instructs the module to consider the users definition absolute.  It will remove any previously configured users on the device with the exception of the current defined set of aggregate.
+        # @return [:yes, :no, nil] The C(purge) argument instructs the module to consider the users definition absolute.  It will remove any previously configured users on the device with the exception of the current defined set of aggregate.
         attribute :purge
-        validates :purge, type: String
+        validates :purge, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
 
         # @return [:present, :absent, nil] The C(state) argument configures the state of the user definitions as it relates to the device operational configuration.  When set to I(present), the user should be configured in the device active configuration and when set to I(absent) the user should not be in the device active configuration
         attribute :state
         validates :state, inclusion: {:in=>[:present, :absent], :message=>"%{value} needs to be :present, :absent"}, allow_nil: true
 
-        # @return [String, nil] Specifies whether or not the configuration is active or deactivated
+        # @return [:yes, :no, nil] Specifies whether or not the configuration is active or deactivated
         attribute :active
-        validates :active, type: String
+        validates :active, inclusion: {:in=>[:yes, :no], :message=>"%{value} needs to be :yes, :no"}, allow_nil: true
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/junos/junos_vrf.rb

@@ -28,8 +28,9 @@ module Ansible
         attribute :target
         validates :target, type: String
 
-        # @return [Object, nil] Causes JUNOS to allocate a VPN label per VRF rather than per VPN FEC. This allows for forwarding of traffic to directly connected subnets, COS Egress filtering etc.
+        # @return [Symbol, nil] Causes JUNOS to allocate a VPN label per VRF rather than per VPN FEC. This allows for forwarding of traffic to directly connected subnets, COS Egress filtering etc.
         attribute :table_label
+        validates :table_label, type: Symbol
 
         # @return [Array<Hash>, Hash, nil] The set of VRF definition objects to be configured on the remote JUNOS device.  Ths list entries can either be the VRF name or a hash of VRF definitions and attributes.  This argument is mutually exclusive with the C(name) argument.
         attribute :aggregate

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_config_template.rb

@@ -30,8 +30,9 @@ module Ansible
         # @return [Object, nil] ID of the network to bind or unbind configuration template to.
         attribute :net_id
 
-        # @return [Object, nil] Optional boolean indicating whether the network's switches should automatically bind to profiles of the same model.,This option only affects switch networks and switch templates.,Auto-bind is not valid unless the switch template has at least one profile and has at most one profile per switch model.
+        # @return [Symbol, nil] Optional boolean indicating whether the network's switches should automatically bind to profiles of the same model.,This option only affects switch networks and switch templates.,Auto-bind is not valid unless the switch template has at least one profile and has at most one profile per switch model.
         attribute :auto_bind
+        validates :auto_bind, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_device.rb

@@ -54,8 +54,9 @@ module Ansible
         attribute :address
         validates :address, type: TypeGeneric.new(String)
 
-        # @return [Object, nil] Whether or not to set the latitude and longitude of a device based on the new address.,Only applies when C(lat) and C(lng) are not specified.
+        # @return [Symbol, nil] Whether or not to set the latitude and longitude of a device based on the new address.,Only applies when C(lat) and C(lng) are not specified.
         attribute :move_map_marker
+        validates :move_map_marker, type: Symbol
 
         # @return [String, nil] Serial number of device to query LLDP/CDP information from.
         attribute :serial_lldp_cdp

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_mx_l3_firewall.rb

@@ -30,9 +30,9 @@ module Ansible
         attribute :rules
         validates :rules, type: TypeGeneric.new(Hash)
 
-        # @return [Boolean, nil] Whether to log hits against the default firewall rule.,Only applicable if a syslog server is specified against the network.,This is not shown in response from Meraki. Instead, refer to the C(syslog_enabled) value in the default rule.
+        # @return [Symbol, nil] Whether to log hits against the default firewall rule.,Only applicable if a syslog server is specified against the network.,This is not shown in response from Meraki. Instead, refer to the C(syslog_enabled) value in the default rule.
         attribute :syslog_default_rule
-        validates :syslog_default_rule, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :syslog_default_rule, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_network.rb

@@ -42,8 +42,9 @@ module Ansible
         attribute :timezone
         validates :timezone, type: String
 
-        # @return [Object, nil] - Disables the local device status pages (U[my.meraki.com](my.meraki.com), U[ap.meraki.com](ap.meraki.com), U[switch.meraki.com](switch.meraki.com), U[wired.meraki.com](wired.meraki.com))\r\n
+        # @return [Symbol, nil] - Disables the local device status pages (U[my.meraki.com](my.meraki.com), U[ap.meraki.com](ap.meraki.com), U[switch.meraki.com](switch.meraki.com), U[wired.meraki.com](wired.meraki.com))\r\n
         attribute :disable_my_meraki
+        validates :disable_my_meraki, type: Symbol
       end
     end
   end

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_snmp.rb

@@ -12,13 +12,13 @@ module Ansible
         attribute :state
         validates :state, inclusion: {:in=>[:query, :present], :message=>"%{value} needs to be :query, :present"}, allow_nil: true
 
-        # @return [TrueClass, FalseClass, nil] Specifies whether SNMPv2c is enabled.
+        # @return [Symbol, nil] Specifies whether SNMPv2c is enabled.
         attribute :v2c_enabled
-        validates :v2c_enabled, type: MultipleTypes.new(TrueClass, FalseClass)
+        validates :v2c_enabled, type: Symbol
 
-        # @return [Boolean, nil] Specifies whether SNMPv3 is enabled.
+        # @return [Symbol, nil] Specifies whether SNMPv3 is enabled.
         attribute :v3_enabled
-        validates :v3_enabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :v3_enabled, type: Symbol
 
         # @return [:MD5, :SHA, nil] Sets authentication mode for SNMPv3.
         attribute :v3_auth_mode

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_ssid.rb

@@ -30,8 +30,9 @@ module Ansible
         # @return [Object, nil] ID of network.
         attribute :net_id
 
-        # @return [Object, nil] Enable or disable SSID network.
+        # @return [Symbol, nil] Enable or disable SSID network.
         attribute :enabled
+        validates :enabled, type: Symbol
 
         # @return [:open, :psk, :"open-with-radius", :"8021x-meraki", :"8021x-radius", nil] Set authentication mode of network.
         attribute :auth_mode
@@ -55,8 +56,9 @@ module Ansible
         # @return [Object, nil] List of RADIUS servers.
         attribute :radius_servers
 
-        # @return [Object, nil] Enable or disable RADIUS CoA (Change of Authorization) on SSID.
+        # @return [Symbol, nil] Enable or disable RADIUS CoA (Change of Authorization) on SSID.
         attribute :radius_coa_enabled
+        validates :radius_coa_enabled, type: Symbol
 
         # @return [:"Deny access", :"Allow access", nil] Set client access policy in case RADIUS servers aren't available.
         attribute :radius_failover_policy
@@ -66,8 +68,9 @@ module Ansible
         attribute :radius_load_balancing_policy
         validates :radius_load_balancing_policy, inclusion: {:in=>[:"Strict priority order", :"Round robin"], :message=>"%{value} needs to be :\"Strict priority order\", :\"Round robin\""}, allow_nil: true
 
-        # @return [Object, nil] Enable or disable RADIUS accounting.
+        # @return [Symbol, nil] Enable or disable RADIUS accounting.
         attribute :radius_accounting_enabled
+        validates :radius_accounting_enabled, type: Symbol
 
         # @return [Object, nil] List of RADIUS servers for RADIUS accounting.
         attribute :radius_accounting_servers
@@ -76,8 +79,9 @@ module Ansible
         attribute :ip_assignment_mode
         validates :ip_assignment_mode, inclusion: {:in=>[:"NAT mode", :"Bridge mode", :"Layer 3 roaming", :"Layer 3 roaming with a concentrator", :VPN], :message=>"%{value} needs to be :\"NAT mode\", :\"Bridge mode\", :\"Layer 3 roaming\", :\"Layer 3 roaming with a concentrator\", :VPN"}, allow_nil: true
 
-        # @return [Object, nil] Set whether to use VLAN tagging.
+        # @return [Symbol, nil] Set whether to use VLAN tagging.
         attribute :use_vlan_tagging
+        validates :use_vlan_tagging, type: Symbol
 
         # @return [Object, nil] Default VLAN ID.
         attribute :default_vlan_id
@@ -88,8 +92,9 @@ module Ansible
         # @return [Object, nil] List of VLAN tags.
         attribute :ap_tags_vlan_ids
 
-        # @return [Object, nil] Enable or disable walled garden functionality.
+        # @return [Symbol, nil] Enable or disable walled garden functionality.
         attribute :walled_garden_enabled
+        validates :walled_garden_enabled, type: Symbol
 
         # @return [Object, nil] List of walled garden ranges.
         attribute :walled_garden_ranges

data/lib/ansible/ruby/modules/generated/network/meraki/meraki_switchport.rb

@@ -23,9 +23,9 @@ module Ansible
         attribute :enabled
         validates :enabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
 
-        # @return [Boolean, nil] Isolation status of switchport.
+        # @return [Symbol, nil] Isolation status of switchport.
         attribute :isolation_enabled
-        validates :isolation_enabled, inclusion: {:in=>[true, false], :message=>"%{value} needs to be true, false"}, allow_nil: true
+        validates :isolation_enabled, type: Symbol
 
         # @return [:"Auto negotiate", :"100Megabit (auto)", :"100 Megabit full duplex (forced)", nil] Link speed for the switchport.
         attribute :link_negotiation