xcoll 0.3.6__py3-none-any.whl → 0.5.0__py3-none-any.whl

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/CMakeLists.txt

@@ -0,0 +1,297 @@
+# CMakeLists.txt -- Build system for the pybind11 modules
+#
+# Copyright (c) 2015 Wenzel Jakob <wenzel@inf.ethz.ch>
+#
+# All rights reserved. Use of this source code is governed by a
+# BSD-style license that can be found in the LICENSE file.
+
+cmake_minimum_required(VERSION 3.4)
+
+# The `cmake_minimum_required(VERSION 3.4...3.21)` syntax does not work with
+# some versions of VS that have a patched CMake 3.11. This forces us to emulate
+# the behavior using the following workaround:
+if(${CMAKE_VERSION} VERSION_LESS 3.21)
+  cmake_policy(VERSION ${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION})
+else()
+  cmake_policy(VERSION 3.21)
+endif()
+
+# Extract project version from source
+file(STRINGS "${CMAKE_CURRENT_SOURCE_DIR}/include/pybind11/detail/common.h"
+     pybind11_version_defines REGEX "#define PYBIND11_VERSION_(MAJOR|MINOR|PATCH) ")
+
+foreach(ver ${pybind11_version_defines})
+  if(ver MATCHES [[#define PYBIND11_VERSION_(MAJOR|MINOR|PATCH) +([^ ]+)$]])
+    set(PYBIND11_VERSION_${CMAKE_MATCH_1} "${CMAKE_MATCH_2}")
+  endif()
+endforeach()
+
+if(PYBIND11_VERSION_PATCH MATCHES [[\.([a-zA-Z0-9]+)$]])
+  set(pybind11_VERSION_TYPE "${CMAKE_MATCH_1}")
+endif()
+string(REGEX MATCH "^[0-9]+" PYBIND11_VERSION_PATCH "${PYBIND11_VERSION_PATCH}")
+
+project(
+  pybind11
+  LANGUAGES CXX
+  VERSION "${PYBIND11_VERSION_MAJOR}.${PYBIND11_VERSION_MINOR}.${PYBIND11_VERSION_PATCH}")
+
+# Standard includes
+include(GNUInstallDirs)
+include(CMakePackageConfigHelpers)
+include(CMakeDependentOption)
+
+if(NOT pybind11_FIND_QUIETLY)
+  message(STATUS "pybind11 v${pybind11_VERSION} ${pybind11_VERSION_TYPE}")
+endif()
+
+# Avoid infinite recursion if tests include this as a subdirectory
+if(DEFINED PYBIND11_MASTER_PROJECT)
+  set(PYBIND11_TEST OFF)
+endif()
+
+# Check if pybind11 is being used directly or via add_subdirectory
+if(CMAKE_SOURCE_DIR STREQUAL PROJECT_SOURCE_DIR AND NOT DEFINED PYBIND11_MASTER_PROJECT)
+  ### Warn if not an out-of-source builds
+  if(CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
+    set(lines
+        "You are building in-place. If that is not what you intended to "
+        "do, you can clean the source directory with:\n"
+        "rm -r CMakeCache.txt CMakeFiles/ cmake_uninstall.cmake pybind11Config.cmake "
+        "pybind11ConfigVersion.cmake tests/CMakeFiles/\n")
+    message(AUTHOR_WARNING ${lines})
+  endif()
+
+  set(PYBIND11_MASTER_PROJECT ON)
+
+  if(OSX AND CMAKE_VERSION VERSION_LESS 3.7)
+    # Bug in macOS CMake < 3.7 is unable to download catch
+    message(WARNING "CMAKE 3.7+ needed on macOS to download catch, and newer HIGHLY recommended")
+  elseif(WINDOWS AND CMAKE_VERSION VERSION_LESS 3.8)
+    # Only tested with 3.8+ in CI.
+    message(WARNING "CMAKE 3.8+ tested on Windows, previous versions untested")
+  endif()
+
+  message(STATUS "CMake ${CMAKE_VERSION}")
+
+  if(CMAKE_CXX_STANDARD)
+    set(CMAKE_CXX_EXTENSIONS OFF)
+    set(CMAKE_CXX_STANDARD_REQUIRED ON)
+  endif()
+
+  set(pybind11_system "")
+else()
+  set(PYBIND11_MASTER_PROJECT OFF)
+  set(pybind11_system SYSTEM)
+endif()
+
+# Options
+option(PYBIND11_INSTALL "Install pybind11 header files?" ${PYBIND11_MASTER_PROJECT})
+option(PYBIND11_TEST "Build pybind11 test suite?" ${PYBIND11_MASTER_PROJECT})
+option(PYBIND11_NOPYTHON "Disable search for Python" OFF)
+set(PYBIND11_INTERNALS_VERSION
+    ""
+    CACHE STRING "Override the ABI version, may be used to enable the unstable ABI.")
+
+cmake_dependent_option(
+  USE_PYTHON_INCLUDE_DIR
+  "Install pybind11 headers in Python include directory instead of default installation prefix"
+  OFF "PYBIND11_INSTALL" OFF)
+
+cmake_dependent_option(PYBIND11_FINDPYTHON "Force new FindPython" OFF
+                       "NOT CMAKE_VERSION VERSION_LESS 3.12" OFF)
+
+# NB: when adding a header don't forget to also add it to setup.py
+set(PYBIND11_HEADERS
+    include/pybind11/detail/class.h
+    include/pybind11/detail/common.h
+    include/pybind11/detail/descr.h
+    include/pybind11/detail/init.h
+    include/pybind11/detail/internals.h
+    include/pybind11/detail/type_caster_base.h
+    include/pybind11/detail/typeid.h
+    include/pybind11/attr.h
+    include/pybind11/buffer_info.h
+    include/pybind11/cast.h
+    include/pybind11/chrono.h
+    include/pybind11/common.h
+    include/pybind11/complex.h
+    include/pybind11/options.h
+    include/pybind11/eigen.h
+    include/pybind11/embed.h
+    include/pybind11/eval.h
+    include/pybind11/gil.h
+    include/pybind11/iostream.h
+    include/pybind11/functional.h
+    include/pybind11/numpy.h
+    include/pybind11/operators.h
+    include/pybind11/pybind11.h
+    include/pybind11/pytypes.h
+    include/pybind11/stl.h
+    include/pybind11/stl_bind.h
+    include/pybind11/stl/filesystem.h)
+
+# Compare with grep and warn if mismatched
+if(PYBIND11_MASTER_PROJECT AND NOT CMAKE_VERSION VERSION_LESS 3.12)
+  file(
+    GLOB_RECURSE _pybind11_header_check
+    LIST_DIRECTORIES false
+    RELATIVE "${CMAKE_CURRENT_SOURCE_DIR}"
+    CONFIGURE_DEPENDS "include/pybind11/*.h")
+  set(_pybind11_here_only ${PYBIND11_HEADERS})
+  set(_pybind11_disk_only ${_pybind11_header_check})
+  list(REMOVE_ITEM _pybind11_here_only ${_pybind11_header_check})
+  list(REMOVE_ITEM _pybind11_disk_only ${PYBIND11_HEADERS})
+  if(_pybind11_here_only)
+    message(AUTHOR_WARNING "PYBIND11_HEADERS has extra files:" ${_pybind11_here_only})
+  endif()
+  if(_pybind11_disk_only)
+    message(AUTHOR_WARNING "PYBIND11_HEADERS is missing files:" ${_pybind11_disk_only})
+  endif()
+endif()
+
+# CMake 3.12 added list(TRANSFORM <list> PREPEND
+# But we can't use it yet
+string(REPLACE "include/" "${CMAKE_CURRENT_SOURCE_DIR}/include/" PYBIND11_HEADERS
+               "${PYBIND11_HEADERS}")
+
+# Cache variable so this can be used in parent projects
+set(pybind11_INCLUDE_DIR
+    "${CMAKE_CURRENT_LIST_DIR}/include"
+    CACHE INTERNAL "Directory where pybind11 headers are located")
+
+# Backward compatible variable for add_subdirectory mode
+if(NOT PYBIND11_MASTER_PROJECT)
+  set(PYBIND11_INCLUDE_DIR
+      "${pybind11_INCLUDE_DIR}"
+      CACHE INTERNAL "")
+endif()
+
+# Note: when creating targets, you cannot use if statements at configure time -
+# you need generator expressions, because those will be placed in the target file.
+# You can also place ifs *in* the Config.in, but not here.
+
+# This section builds targets, but does *not* touch Python
+# Non-IMPORT targets cannot be defined twice
+if(NOT TARGET pybind11_headers)
+  # Build the headers-only target (no Python included):
+  # (long name used here to keep this from clashing in subdirectory mode)
+  add_library(pybind11_headers INTERFACE)
+  add_library(pybind11::pybind11_headers ALIAS pybind11_headers) # to match exported target
+  add_library(pybind11::headers ALIAS pybind11_headers) # easier to use/remember
+
+  target_include_directories(
+    pybind11_headers ${pybind11_system} INTERFACE $<BUILD_INTERFACE:${pybind11_INCLUDE_DIR}>
+                                                  $<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>)
+
+  target_compile_features(pybind11_headers INTERFACE cxx_inheriting_constructors cxx_user_literals
+                                                     cxx_right_angle_brackets)
+  if(NOT "${PYBIND11_INTERNALS_VERSION}" STREQUAL "")
+    target_compile_definitions(
+      pybind11_headers INTERFACE "PYBIND11_INTERNALS_VERSION=${PYBIND11_INTERNALS_VERSION}")
+  endif()
+else()
+  # It is invalid to install a target twice, too.
+  set(PYBIND11_INSTALL OFF)
+endif()
+
+include("${CMAKE_CURRENT_SOURCE_DIR}/tools/pybind11Common.cmake")
+
+# Relative directory setting
+if(USE_PYTHON_INCLUDE_DIR AND DEFINED Python_INCLUDE_DIRS)
+  file(RELATIVE_PATH CMAKE_INSTALL_INCLUDEDIR ${CMAKE_INSTALL_PREFIX} ${Python_INCLUDE_DIRS})
+elseif(USE_PYTHON_INCLUDE_DIR AND DEFINED PYTHON_INCLUDE_DIR)
+  file(RELATIVE_PATH CMAKE_INSTALL_INCLUDEDIR ${CMAKE_INSTALL_PREFIX} ${PYTHON_INCLUDE_DIRS})
+endif()
+
+if(PYBIND11_INSTALL)
+  install(DIRECTORY ${pybind11_INCLUDE_DIR}/pybind11 DESTINATION ${CMAKE_INSTALL_INCLUDEDIR})
+  set(PYBIND11_CMAKECONFIG_INSTALL_DIR
+      "${CMAKE_INSTALL_DATAROOTDIR}/cmake/${PROJECT_NAME}"
+      CACHE STRING "install path for pybind11Config.cmake")
+
+  if(IS_ABSOLUTE "${CMAKE_INSTALL_INCLUDEDIR}")
+    set(pybind11_INCLUDEDIR "${CMAKE_INSTALL_FULL_INCLUDEDIR}")
+  else()
+    set(pybind11_INCLUDEDIR "\$\{PACKAGE_PREFIX_DIR\}/${CMAKE_INSTALL_INCLUDEDIR}")
+  endif()
+
+  configure_package_config_file(
+    tools/${PROJECT_NAME}Config.cmake.in "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}Config.cmake"
+    INSTALL_DESTINATION ${PYBIND11_CMAKECONFIG_INSTALL_DIR})
+
+  if(CMAKE_VERSION VERSION_LESS 3.14)
+    # Remove CMAKE_SIZEOF_VOID_P from ConfigVersion.cmake since the library does
+    # not depend on architecture specific settings or libraries.
+    set(_PYBIND11_CMAKE_SIZEOF_VOID_P ${CMAKE_SIZEOF_VOID_P})
+    unset(CMAKE_SIZEOF_VOID_P)
+
+    write_basic_package_version_file(
+      ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
+      VERSION ${PROJECT_VERSION}
+      COMPATIBILITY AnyNewerVersion)
+
+    set(CMAKE_SIZEOF_VOID_P ${_PYBIND11_CMAKE_SIZEOF_VOID_P})
+  else()
+    # CMake 3.14+ natively supports header-only libraries
+    write_basic_package_version_file(
+      ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
+      VERSION ${PROJECT_VERSION}
+      COMPATIBILITY AnyNewerVersion ARCH_INDEPENDENT)
+  endif()
+
+  install(
+    FILES ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}Config.cmake
+          ${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
+          tools/FindPythonLibsNew.cmake
+          tools/pybind11Common.cmake
+          tools/pybind11Tools.cmake
+          tools/pybind11NewTools.cmake
+    DESTINATION ${PYBIND11_CMAKECONFIG_INSTALL_DIR})
+
+  if(NOT PYBIND11_EXPORT_NAME)
+    set(PYBIND11_EXPORT_NAME "${PROJECT_NAME}Targets")
+  endif()
+
+  install(TARGETS pybind11_headers EXPORT "${PYBIND11_EXPORT_NAME}")
+
+  install(
+    EXPORT "${PYBIND11_EXPORT_NAME}"
+    NAMESPACE "pybind11::"
+    DESTINATION ${PYBIND11_CMAKECONFIG_INSTALL_DIR})
+
+  # Uninstall target
+  if(PYBIND11_MASTER_PROJECT)
+    configure_file("${CMAKE_CURRENT_SOURCE_DIR}/tools/cmake_uninstall.cmake.in"
+                   "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake" IMMEDIATE @ONLY)
+
+    add_custom_target(uninstall COMMAND ${CMAKE_COMMAND} -P
+                                        ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)
+  endif()
+endif()
+
+# BUILD_TESTING takes priority, but only if this is the master project
+if(PYBIND11_MASTER_PROJECT AND DEFINED BUILD_TESTING)
+  if(BUILD_TESTING)
+    if(_pybind11_nopython)
+      message(FATAL_ERROR "Cannot activate tests in NOPYTHON mode")
+    else()
+      add_subdirectory(tests)
+    endif()
+  endif()
+else()
+  if(PYBIND11_TEST)
+    if(_pybind11_nopython)
+      message(FATAL_ERROR "Cannot activate tests in NOPYTHON mode")
+    else()
+      add_subdirectory(tests)
+    endif()
+  endif()
+endif()
+
+# Better symmetry with find_package(pybind11 CONFIG) mode.
+if(NOT PYBIND11_MASTER_PROJECT)
+  set(pybind11_FOUND
+      TRUE
+      CACHE INTERNAL "True if pybind11 and all required components found on the system")
+endif()

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/LICENSE

@@ -0,0 +1,29 @@
+Copyright (c) 2016 Wenzel Jakob <wenzel.jakob@epfl.ch>, All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Please also refer to the file .github/CONTRIBUTING.md, which clarifies licensing of
+external contributions to this project including patches, pull requests, etc.

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/MANIFEST.in

@@ -0,0 +1,6 @@
+recursive-include pybind11/include/pybind11 *.h
+recursive-include pybind11 *.py
+recursive-include pybind11 py.typed
+recursive-include pybind11 *.pyi
+include pybind11/share/cmake/pybind11/*.cmake
+include LICENSE README.rst pyproject.toml setup.py setup.cfg

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/README.rst

@@ -0,0 +1,180 @@
+.. figure:: https://github.com/pybind/pybind11/raw/master/docs/pybind11-logo.png
+   :alt: pybind11 logo
+
+**pybind11 — Seamless operability between C++11 and Python**
+
+|Latest Documentation Status| |Stable Documentation Status| |Gitter chat| |GitHub Discussions| |CI| |Build status|
+
+|Repology| |PyPI package| |Conda-forge| |Python Versions|
+
+`Setuptools example <https://github.com/pybind/python_example>`_
+• `Scikit-build example <https://github.com/pybind/scikit_build_example>`_
+• `CMake example <https://github.com/pybind/cmake_example>`_
+
+.. start
+
+
+**pybind11** is a lightweight header-only library that exposes C++ types
+in Python and vice versa, mainly to create Python bindings of existing
+C++ code. Its goals and syntax are similar to the excellent
+`Boost.Python <http://www.boost.org/doc/libs/1_58_0/libs/python/doc/>`_
+library by David Abrahams: to minimize boilerplate code in traditional
+extension modules by inferring type information using compile-time
+introspection.
+
+The main issue with Boost.Python—and the reason for creating such a
+similar project—is Boost. Boost is an enormously large and complex suite
+of utility libraries that works with almost every C++ compiler in
+existence. This compatibility has its cost: arcane template tricks and
+workarounds are necessary to support the oldest and buggiest of compiler
+specimens. Now that C++11-compatible compilers are widely available,
+this heavy machinery has become an excessively large and unnecessary
+dependency.
+
+Think of this library as a tiny self-contained version of Boost.Python
+with everything stripped away that isn’t relevant for binding
+generation. Without comments, the core header files only require ~4K
+lines of code and depend on Python (2.7 or 3.5+, or PyPy) and the C++
+standard library. This compact implementation was possible thanks to
+some of the new C++11 language features (specifically: tuples, lambda
+functions and variadic templates). Since its creation, this library has
+grown beyond Boost.Python in many ways, leading to dramatically simpler
+binding code in many common situations.
+
+Tutorial and reference documentation is provided at
+`pybind11.readthedocs.io <https://pybind11.readthedocs.io/en/latest>`_.
+A PDF version of the manual is available
+`here <https://pybind11.readthedocs.io/_/downloads/en/latest/pdf/>`_.
+And the source code is always available at
+`github.com/pybind/pybind11 <https://github.com/pybind/pybind11>`_.
+
+
+Core features
+-------------
+
+
+pybind11 can map the following core C++ features to Python:
+
+- Functions accepting and returning custom data structures per value,
+  reference, or pointer
+- Instance methods and static methods
+- Overloaded functions
+- Instance attributes and static attributes
+- Arbitrary exception types
+- Enumerations
+- Callbacks
+- Iterators and ranges
+- Custom operators
+- Single and multiple inheritance
+- STL data structures
+- Smart pointers with reference counting like ``std::shared_ptr``
+- Internal references with correct reference counting
+- C++ classes with virtual (and pure virtual) methods can be extended
+  in Python
+
+Goodies
+-------
+
+In addition to the core functionality, pybind11 provides some extra
+goodies:
+
+- Python 2.7, 3.5+, and PyPy/PyPy3 7.3 are supported with an
+  implementation-agnostic interface.
+
+- It is possible to bind C++11 lambda functions with captured
+  variables. The lambda capture data is stored inside the resulting
+  Python function object.
+
+- pybind11 uses C++11 move constructors and move assignment operators
+  whenever possible to efficiently transfer custom data types.
+
+- It’s easy to expose the internal storage of custom data types through
+  Pythons’ buffer protocols. This is handy e.g. for fast conversion
+  between C++ matrix classes like Eigen and NumPy without expensive
+  copy operations.
+
+- pybind11 can automatically vectorize functions so that they are
+  transparently applied to all entries of one or more NumPy array
+  arguments.
+
+- Python's slice-based access and assignment operations can be
+  supported with just a few lines of code.
+
+- Everything is contained in just a few header files; there is no need
+  to link against any additional libraries.
+
+- Binaries are generally smaller by a factor of at least 2 compared to
+  equivalent bindings generated by Boost.Python. A recent pybind11
+  conversion of PyRosetta, an enormous Boost.Python binding project,
+  `reported <http://graylab.jhu.edu/RosettaCon2016/PyRosetta-4.pdf>`_
+  a binary size reduction of **5.4x** and compile time reduction by
+  **5.8x**.
+
+- Function signatures are precomputed at compile time (using
+  ``constexpr``), leading to smaller binaries.
+
+- With little extra effort, C++ types can be pickled and unpickled
+  similar to regular Python objects.
+
+Supported compilers
+-------------------
+
+1. Clang/LLVM 3.3 or newer (for Apple Xcode’s clang, this is 5.0.0 or
+   newer)
+2. GCC 4.8 or newer
+3. Microsoft Visual Studio 2015 Update 3 or newer
+4. Intel classic C++ compiler 18 or newer (ICC 20.2 tested in CI)
+5. Cygwin/GCC (previously tested on 2.5.1)
+6. NVCC (CUDA 11.0 tested in CI)
+7. NVIDIA PGI (20.9 tested in CI)
+
+About
+-----
+
+This project was created by `Wenzel
+Jakob <http://rgl.epfl.ch/people/wjakob>`_. Significant features and/or
+improvements to the code were contributed by Jonas Adler, Lori A. Burns,
+Sylvain Corlay, Eric Cousineau, Aaron Gokaslan, Ralf Grosse-Kunstleve, Trent Houliston, Axel
+Huebl, @hulucc, Yannick Jadoul, Sergey Lyskov Johan Mabille, Tomasz Miąsko,
+Dean Moldovan, Ben Pritchard, Jason Rhinelander, Boris Schäling, Pim
+Schellart, Henry Schreiner, Ivan Smirnov, Boris Staletic, and Patrick Stewart.
+
+We thank Google for a generous financial contribution to the continuous
+integration infrastructure used by this project.
+
+
+Contributing
+~~~~~~~~~~~~
+
+See the `contributing
+guide <https://github.com/pybind/pybind11/blob/master/.github/CONTRIBUTING.md>`_
+for information on building and contributing to pybind11.
+
+License
+~~~~~~~
+
+pybind11 is provided under a BSD-style license that can be found in the
+`LICENSE <https://github.com/pybind/pybind11/blob/master/LICENSE>`_
+file. By using, distributing, or contributing to this project, you agree
+to the terms and conditions of this license.
+
+.. |Latest Documentation Status| image:: https://readthedocs.org/projects/pybind11/badge?version=latest
+   :target: http://pybind11.readthedocs.org/en/latest
+.. |Stable Documentation Status| image:: https://img.shields.io/badge/docs-stable-blue.svg
+   :target: http://pybind11.readthedocs.org/en/stable
+.. |Gitter chat| image:: https://img.shields.io/gitter/room/gitterHQ/gitter.svg
+   :target: https://gitter.im/pybind/Lobby
+.. |CI| image:: https://github.com/pybind/pybind11/workflows/CI/badge.svg
+   :target: https://github.com/pybind/pybind11/actions
+.. |Build status| image:: https://ci.appveyor.com/api/projects/status/riaj54pn4h08xy40?svg=true
+   :target: https://ci.appveyor.com/project/wjakob/pybind11
+.. |PyPI package| image:: https://img.shields.io/pypi/v/pybind11.svg
+   :target: https://pypi.org/project/pybind11/
+.. |Conda-forge| image:: https://img.shields.io/conda/vn/conda-forge/pybind11.svg
+   :target: https://github.com/conda-forge/pybind11-feedstock
+.. |Repology| image:: https://repology.org/badge/latest-versions/python:pybind11.svg
+   :target: https://repology.org/project/python:pybind11/versions
+.. |Python Versions| image:: https://img.shields.io/pypi/pyversions/pybind11.svg
+   :target: https://pypi.org/project/pybind11/
+.. |GitHub Discussions| image:: https://img.shields.io/static/v1?label=Discussions&message=Ask&color=blue&logo=github
+   :target: https://github.com/pybind/pybind11/discussions

xcoll/scattering_routines/geant4/collimasim/lib/pybind11/docs/Doxyfile

@@ -0,0 +1,23 @@
+PROJECT_NAME           = pybind11
+INPUT                  = ../include/pybind11/
+RECURSIVE              = YES
+
+GENERATE_HTML          = NO
+GENERATE_LATEX         = NO
+GENERATE_XML           = YES
+XML_OUTPUT             = .build/doxygenxml
+XML_PROGRAMLISTING     = YES
+
+MACRO_EXPANSION        = YES
+EXPAND_ONLY_PREDEF     = YES
+EXPAND_AS_DEFINED      = PYBIND11_RUNTIME_EXCEPTION
+
+ALIASES                = "rst=\verbatim embed:rst"
+ALIASES               += "endrst=\endverbatim"
+
+QUIET                  = YES
+WARNINGS               = YES
+WARN_IF_UNDOCUMENTED   = NO
+PREDEFINED             = DOXYGEN_SHOULD_SKIP_THIS \
+                         PY_MAJOR_VERSION=3 \
+                         PYBIND11_NOINLINE