warp-lang 1.8.0__py3-none-win_amd64.whl → 1.9.0__py3-none-win_amd64.whl

warp/tests/test_vec_assign_copy.py

@@ -0,0 +1,143 @@
+# SPDX-FileCopyrightText: Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import unittest
+
+import numpy as np
+
+import warp as wp
+from warp.tests.unittest_utils import *
+
+
+def setUpModule():
+    wp.config.enable_vector_component_overwrites = True
+
+
+def tearDownModule():
+    wp.config.enable_vector_component_overwrites = False
+
+
+@wp.kernel
+def vec_assign_subscript(x: wp.array(dtype=float), y: wp.array(dtype=wp.vec3)):
+    i = wp.tid()
+
+    a = wp.vec3()
+    a[0] = 1.0 * x[i]
+    a[1] = 2.0 * x[i]
+    a[2] = 3.0 * x[i]
+    y[i] = a
+
+
+@wp.kernel
+def vec_assign_attribute(x: wp.array(dtype=float), y: wp.array(dtype=wp.vec3)):
+    i = wp.tid()
+
+    a = wp.vec3()
+    a.x = 1.0 * x[i]
+    a.y = 2.0 * x[i]
+    a.z = 3.0 * x[i]
+    y[i] = a
+
+
+def test_vec_assign(test, device):
+    def run(kernel):
+        x = wp.ones(1, dtype=float, requires_grad=True, device=device)
+        y = wp.zeros(1, dtype=wp.vec3, requires_grad=True, device=device)
+
+        tape = wp.Tape()
+        with tape:
+            wp.launch(kernel, 1, inputs=[x], outputs=[y], device=device)
+
+        y.grad = wp.ones_like(y)
+        tape.backward()
+
+        assert_np_equal(y.numpy(), np.array([[1.0, 2.0, 3.0]], dtype=float))
+        assert_np_equal(x.grad.numpy(), np.array([6.0], dtype=float))
+
+    run(vec_assign_subscript)
+    run(vec_assign_attribute)
+
+
+def test_vec_assign_copy(test, device):
+    @wp.kernel(module="unique")
+    def vec_assign_overwrite(x: wp.array(dtype=wp.vec3), y: wp.array(dtype=wp.vec3)):
+        tid = wp.tid()
+
+        a = wp.vec3()
+        b = x[tid]
+        a = b
+        a[1] = 3.0
+
+        y[tid] = a
+
+    x = wp.ones(1, dtype=wp.vec3, device=device, requires_grad=True)
+    y = wp.zeros(1, dtype=wp.vec3, device=device, requires_grad=True)
+
+    tape = wp.Tape()
+    with tape:
+        wp.launch(vec_assign_overwrite, dim=1, inputs=[x, y], device=device)
+
+    y.grad = wp.ones_like(y, requires_grad=False)
+    tape.backward()
+
+    assert_np_equal(y.numpy(), np.array([[1.0, 3.0, 1.0]], dtype=float))
+    assert_np_equal(x.grad.numpy(), np.array([[1.0, 0.0, 1.0]], dtype=float))
+
+
+def test_vec_slicing_assign_backward(test, device):
+    @wp.kernel(module="unique")
+    def kernel(arr_x: wp.array(dtype=wp.vec2), arr_y: wp.array(dtype=wp.vec4)):
+        i = wp.tid()
+
+        x = arr_x[i]
+        y = arr_y[i]
+
+        y[:2] = x
+        y[1:-1] += x[:2]
+        y[3:1:-1] -= x[0:]
+
+        arr_y[i] = y
+
+    x = wp.ones(1, dtype=wp.vec2, requires_grad=True, device=device)
+    y = wp.zeros(1, dtype=wp.vec4, requires_grad=True, device=device)
+
+    tape = wp.Tape()
+    with tape:
+        wp.launch(kernel, 1, inputs=(x,), outputs=(y,), device=device)
+
+    y.grad = wp.ones_like(y)
+    tape.backward()
+
+    assert_np_equal(y.numpy(), np.array(((1.0, 2.0, 0.0, -1.0),), dtype=float))
+    assert_np_equal(x.grad.numpy(), np.array(((1.0, 1.0),), dtype=float))
+
+
+devices = get_test_devices()
+
+
+class TestVecAssignCopy(unittest.TestCase):
+    pass
+
+
+add_function_test(TestVecAssignCopy, "test_vec_assign", test_vec_assign, devices=devices)
+add_function_test(TestVecAssignCopy, "test_vec_assign_copy", test_vec_assign_copy, devices=devices)
+add_function_test(
+    TestVecAssignCopy, "test_vec_slicing_assign_backward", test_vec_slicing_assign_backward, devices=devices
+)
+
+
+if __name__ == "__main__":
+    wp.clear_kernel_cache()
+    unittest.main(verbosity=2, failfast=True)

warp/tests/test_vec_constructors.py

@@ -0,0 +1,325 @@
+# SPDX-FileCopyrightText: Copyright (c) 2025 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import unittest
+
+import numpy as np
+
+import warp as wp
+from warp.tests.unittest_utils import *
+
+np_float_types = [np.float16, np.float32, np.float64]
+
+kernel_cache = {}
+
+
+def getkernel(func, suffix=""):
+    key = func.__name__ + "_" + suffix
+    if key not in kernel_cache:
+        kernel_cache[key] = wp.Kernel(func=func, key=key)
+    return kernel_cache[key]
+
+
+def test_anon_constructor_error_length_mismatch(test, device):
+    @wp.kernel
+    def kernel():
+        wp.vector(wp.vector(length=2, dtype=float), length=3, dtype=float)
+
+    with test.assertRaisesRegex(
+        RuntimeError,
+        r"incompatible vector of length 3 given when copy constructing a vector of length 2$",
+    ):
+        wp.launch(kernel, dim=1, inputs=[], device=device)
+
+
+def test_anon_constructor_error_numeric_arg_missing(test, device):
+    @wp.kernel
+    def kernel():
+        wp.vector(1.0, 2.0, length=12345)
+
+    with test.assertRaisesRegex(
+        RuntimeError,
+        r"incompatible number of values given \(2\) when constructing a vector of length 12345$",
+    ):
+        wp.launch(kernel, dim=1, inputs=[], device=device)
+
+
+def test_anon_constructor_error_length_arg_missing(test, device):
+    @wp.kernel
+    def kernel():
+        wp.vector()
+
+    with test.assertRaisesRegex(
+        RuntimeError,
+        r"the `length` argument must be specified when zero-initializing a vector$",
+    ):
+        wp.launch(kernel, dim=1, inputs=[], device=device)
+
+
+def test_anon_constructor_error_numeric_args_mismatch(test, device):
+    @wp.kernel
+    def kernel():
+        wp.vector(1.0, 2)
+
+    with test.assertRaisesRegex(
+        RuntimeError,
+        r"all values given when constructing a vector must have the same type$",
+    ):
+        wp.launch(kernel, dim=1, inputs=[], device=device)
+
+
+def test_tpl_constructor_error_incompatible_sizes(test, device):
+    @wp.kernel
+    def kernel():
+        wp.vec3(wp.vec2(1.0, 2.0))
+
+    with test.assertRaisesRegex(
+        RuntimeError, "incompatible vector of length 3 given when copy constructing a vector of length 2"
+    ):
+        wp.launch(kernel, dim=1, inputs=[], device=device)
+
+
+def test_tpl_constructor_error_numeric_args_mismatch(test, device):
+    @wp.kernel
+    def kernel():
+        wp.vec2(1.0, 2)
+
+    with test.assertRaisesRegex(
+        RuntimeError,
+        r"all values given when constructing a vector must have the same type$",
+    ):
+        wp.launch(kernel, dim=1, inputs=[], device=device)
+
+
+def test_casting_constructors(test, device, dtype, register_kernels=False):
+    np_type = np.dtype(dtype)
+    wp_type = wp.types.np_dtype_to_warp_type[np_type]
+    vec3 = wp.types.vector(length=3, dtype=wp_type)
+
+    np16 = np.dtype(np.float16)
+    wp16 = wp.types.np_dtype_to_warp_type[np16]
+
+    np32 = np.dtype(np.float32)
+    wp32 = wp.types.np_dtype_to_warp_type[np32]
+
+    np64 = np.dtype(np.float64)
+    wp64 = wp.types.np_dtype_to_warp_type[np64]
+
+    def cast_float16(a: wp.array(dtype=wp_type, ndim=2), b: wp.array(dtype=wp16, ndim=2)):
+        tid = wp.tid()
+
+        v1 = vec3(a[tid, 0], a[tid, 1], a[tid, 2])
+        v2 = wp.vector(v1, dtype=wp16)
+
+        b[tid, 0] = v2[0]
+        b[tid, 1] = v2[1]
+        b[tid, 2] = v2[2]
+
+    def cast_float32(a: wp.array(dtype=wp_type, ndim=2), b: wp.array(dtype=wp32, ndim=2)):
+        tid = wp.tid()
+
+        v1 = vec3(a[tid, 0], a[tid, 1], a[tid, 2])
+        v2 = wp.vector(v1, dtype=wp32)
+
+        b[tid, 0] = v2[0]
+        b[tid, 1] = v2[1]
+        b[tid, 2] = v2[2]
+
+    def cast_float64(a: wp.array(dtype=wp_type, ndim=2), b: wp.array(dtype=wp64, ndim=2)):
+        tid = wp.tid()
+
+        v1 = vec3(a[tid, 0], a[tid, 1], a[tid, 2])
+        v2 = wp.vector(v1, dtype=wp64)
+
+        b[tid, 0] = v2[0]
+        b[tid, 1] = v2[1]
+        b[tid, 2] = v2[2]
+
+    kernel_16 = getkernel(cast_float16, suffix=dtype.__name__)
+    kernel_32 = getkernel(cast_float32, suffix=dtype.__name__)
+    kernel_64 = getkernel(cast_float64, suffix=dtype.__name__)
+
+    if register_kernels:
+        return
+
+    # check casting to float 16
+    a = wp.array(np.ones((1, 3), dtype=np_type), dtype=wp_type, requires_grad=True, device=device)
+    b = wp.array(np.zeros((1, 3), dtype=np16), dtype=wp16, requires_grad=True, device=device)
+    b_result = np.ones((1, 3), dtype=np16)
+    b_grad = wp.array(np.ones((1, 3), dtype=np16), dtype=wp16, device=device)
+    a_grad = wp.array(np.ones((1, 3), dtype=np_type), dtype=wp_type, device=device)
+
+    tape = wp.Tape()
+    with tape:
+        wp.launch(kernel=kernel_16, dim=1, inputs=[a, b], device=device)
+
+    tape.backward(grads={b: b_grad})
+    out = tape.gradients[a].numpy()
+
+    assert_np_equal(b.numpy(), b_result)
+    assert_np_equal(out, a_grad.numpy())
+
+    # check casting to float 32
+    a = wp.array(np.ones((1, 3), dtype=np_type), dtype=wp_type, requires_grad=True, device=device)
+    b = wp.array(np.zeros((1, 3), dtype=np32), dtype=wp32, requires_grad=True, device=device)
+    b_result = np.ones((1, 3), dtype=np32)
+    b_grad = wp.array(np.ones((1, 3), dtype=np32), dtype=wp32, device=device)
+    a_grad = wp.array(np.ones((1, 3), dtype=np_type), dtype=wp_type, device=device)
+
+    tape = wp.Tape()
+    with tape:
+        wp.launch(kernel=kernel_32, dim=1, inputs=[a, b], device=device)
+
+    tape.backward(grads={b: b_grad})
+    out = tape.gradients[a].numpy()
+
+    assert_np_equal(b.numpy(), b_result)
+    assert_np_equal(out, a_grad.numpy())
+
+    # check casting to float 64
+    a = wp.array(np.ones((1, 3), dtype=np_type), dtype=wp_type, requires_grad=True, device=device)
+    b = wp.array(np.zeros((1, 3), dtype=np64), dtype=wp64, requires_grad=True, device=device)
+    b_result = np.ones((1, 3), dtype=np64)
+    b_grad = wp.array(np.ones((1, 3), dtype=np64), dtype=wp64, device=device)
+    a_grad = wp.array(np.ones((1, 3), dtype=np_type), dtype=wp_type, device=device)
+
+    tape = wp.Tape()
+    with tape:
+        wp.launch(kernel=kernel_64, dim=1, inputs=[a, b], device=device)
+
+    tape.backward(grads={b: b_grad})
+    out = tape.gradients[a].numpy()
+
+    assert_np_equal(b.numpy(), b_result)
+    assert_np_equal(out, a_grad.numpy())
+
+
+@wp.kernel
+def test_vector_constructors_value_func():
+    a = wp.vec2()
+    b = wp.vector(a, dtype=wp.float16)
+    c = wp.vector(a)
+    d = wp.vector(a, length=2)
+    e = wp.vector(1.0, 2.0, 3.0, dtype=float)
+
+
+# Test matrix constructors using explicit type (float16)
+# note that these tests are specifically not using generics / closure
+# args to create kernels dynamically (like the rest of this file)
+# as those use different code paths to resolve arg types which
+# has lead to regressions.
+@wp.kernel
+def test_vector_constructors_explicit_precision():
+    # construction for custom matrix types
+    ones = wp.vector(wp.float16(1.0), length=2)
+    zeros = wp.vector(length=2, dtype=wp.float16)
+    custom = wp.vector(wp.float16(0.0), wp.float16(1.0))
+
+    for i in range(2):
+        wp.expect_eq(ones[i], wp.float16(1.0))
+        wp.expect_eq(zeros[i], wp.float16(0.0))
+        wp.expect_eq(custom[i], wp.float16(i))
+
+
+# Same as above but with a default (float/int) type
+# which tests some different code paths that
+# need to ensure types are correctly canonicalized
+# during codegen
+@wp.kernel
+def test_vector_constructors_default_precision():
+    # construction for custom matrix types
+    ones = wp.vector(1.0, length=2)
+    zeros = wp.vector(length=2, dtype=float)
+    custom = wp.vector(0.0, 1.0)
+
+    for i in range(2):
+        wp.expect_eq(ones[i], 1.0)
+        wp.expect_eq(zeros[i], 0.0)
+        wp.expect_eq(custom[i], float(i))
+
+
+CONSTANT_LENGTH = wp.constant(10)
+
+
+# tests that we can use global constants in length keyword argument
+# for vector constructor
+@wp.kernel
+def test_vector_constructors_constant_length():
+    v = wp.vector(length=(CONSTANT_LENGTH), dtype=float)
+
+    for i in range(CONSTANT_LENGTH):
+        v[i] = float(i)
+
+
+devices = get_test_devices()
+
+
+class TestVecConstructors(unittest.TestCase):
+    pass
+
+
+add_function_test(
+    TestVecConstructors,
+    "test_anon_constructor_error_length_mismatch",
+    test_anon_constructor_error_length_mismatch,
+    devices=devices,
+)
+add_function_test(
+    TestVecConstructors,
+    "test_anon_constructor_error_numeric_arg_missing",
+    test_anon_constructor_error_numeric_arg_missing,
+    devices=devices,
+)
+add_function_test(
+    TestVecConstructors,
+    "test_anon_constructor_error_length_arg_missing",
+    test_anon_constructor_error_length_arg_missing,
+    devices=devices,
+)
+add_function_test(
+    TestVecConstructors,
+    "test_anon_constructor_error_numeric_args_mismatch",
+    test_anon_constructor_error_numeric_args_mismatch,
+    devices=devices,
+)
+add_function_test(
+    TestVecConstructors,
+    "test_tpl_constructor_error_incompatible_sizes",
+    test_tpl_constructor_error_incompatible_sizes,
+    devices=devices,
+)
+add_function_test(
+    TestVecConstructors,
+    "test_tpl_constructor_error_numeric_args_mismatch",
+    test_tpl_constructor_error_numeric_args_mismatch,
+    devices=devices,
+)
+add_kernel_test(TestVecConstructors, test_vector_constructors_value_func, dim=1, devices=devices)
+add_kernel_test(TestVecConstructors, test_vector_constructors_explicit_precision, dim=1, devices=devices)
+add_kernel_test(TestVecConstructors, test_vector_constructors_default_precision, dim=1, devices=devices)
+add_kernel_test(TestVecConstructors, test_vector_constructors_constant_length, dim=1, devices=devices)
+
+for dtype in np_float_types:
+    add_function_test_register_kernel(
+        TestVecConstructors,
+        f"test_casting_constructors_{dtype.__name__}",
+        test_casting_constructors,
+        devices=devices,
+        dtype=dtype,
+    )
+
+if __name__ == "__main__":
+    wp.clear_kernel_cache()
+    unittest.main(verbosity=2, failfast=True)