vispy 0.15.0__cp313-cp313-macosx_11_0_arm64.whl

vispy/visuals/volume.py

@@ -0,0 +1,1366 @@
+# -*- coding: utf-8 -*-
+# Copyright (c) Vispy Development Team. All Rights Reserved.
+# Distributed under the (new) BSD License. See LICENSE.txt for more info.
+
+"""
+About this technique
+--------------------
+
+In Python, we define the six faces of a cuboid to draw, as well as
+texture cooridnates corresponding with the vertices of the cuboid.
+The back faces of the cuboid are drawn (and front faces are culled)
+because only the back faces are visible when the camera is inside the
+volume.
+
+In the vertex shader, we intersect the view ray with the near and far
+clipping planes. In the fragment shader, we use these two points to
+compute the ray direction and then compute the position of the front
+cuboid surface (or near clipping plane) along the view ray.
+
+Next we calculate the number of steps to walk from the front surface
+to the back surface and iterate over these positions in a for-loop.
+At each iteration, the fragment color or other voxel information is
+updated depending on the selected rendering method.
+
+It is important for the texture interpolation is 'linear' for most volumes,
+since with 'nearest' the result can look very ugly; however for volumes with
+discrete data 'nearest' is sometimes appropriate. The wrapping should be
+clamp_to_edge to avoid artifacts when the ray takes a small step outside the
+volume.
+
+The ray direction is established by mapping the vertex to the document
+coordinate frame, adjusting z to +/-1, and mapping the coordinate back.
+The ray is expressed in coordinates local to the volume (i.e. texture
+coordinates).
+
+"""
+from __future__ import annotations
+
+from typing import Optional
+from functools import lru_cache
+import warnings
+
+from ._scalable_textures import CPUScaledTexture3D, GPUScaledTextured3D, Texture2D
+from ..gloo import VertexBuffer, IndexBuffer
+from . import Visual
+from .shaders import Function
+from ..color import get_colormap
+from ..io import load_spatial_filters
+
+import numpy as np
+
+# todo: implement more render methods (port from visvis)
+# todo: allow anisotropic data
+# todo: what to do about lighting? ambi/diffuse/spec/shinynes on each visual?
+
+
+_VERTEX_SHADER = """
+attribute vec3 a_position;
+uniform vec3 u_shape;
+
+varying vec3 v_position;
+varying vec4 v_nearpos;
+varying vec4 v_farpos;
+
+void main() {
+    v_position = a_position;
+
+    // Project local vertex coordinate to camera position. Then do a step
+    // backward (in cam coords) and project back. Voila, we get our ray vector.
+    vec4 pos_in_cam = $viewtransformf(vec4(v_position, 1));
+
+    // intersection of ray and near clipping plane (z = -1 in clip coords)
+    pos_in_cam.z = -pos_in_cam.w;
+    v_nearpos = $viewtransformi(pos_in_cam);
+
+    // intersection of ray and far clipping plane (z = +1 in clip coords)
+    pos_in_cam.z = pos_in_cam.w;
+    v_farpos = $viewtransformi(pos_in_cam);
+
+    gl_Position = $transform(vec4(v_position, 1.0));
+}
+"""  # noqa
+
+_FRAGMENT_SHADER = """
+// uniforms
+uniform $sampler_type u_volumetex;
+uniform vec3 u_shape;
+uniform vec2 clim;
+uniform float gamma;
+uniform float u_threshold;
+uniform float u_attenuation;
+uniform float u_relative_step_size;
+uniform float u_mip_cutoff;
+uniform float u_minip_cutoff;
+
+//varyings
+varying vec3 v_position;
+varying vec4 v_nearpos;
+varying vec4 v_farpos;
+
+// uniforms for lighting. Hard coded until we figure out how to do lights
+const vec4 u_ambient = vec4(0.2, 0.2, 0.2, 1.0);
+const vec4 u_diffuse = vec4(0.8, 0.2, 0.2, 1.0);
+const vec4 u_specular = vec4(1.0, 1.0, 1.0, 1.0);
+const float u_shininess = 40.0;
+
+// uniforms for plane definition. Defined in data coordinates.
+uniform vec3 u_plane_normal;
+uniform vec3 u_plane_position;
+uniform float u_plane_thickness;
+
+//varying vec3 lightDirs[1];
+
+// global holding view direction in local coordinates
+vec3 view_ray;
+
+float rand(vec2 co)
+{
+    // Create a pseudo-random number between 0 and 1.
+    // http://stackoverflow.com/questions/4200224
+    return fract(sin(dot(co.xy ,vec2(12.9898, 78.233))) * 43758.5453);
+}
+
+float colorToVal(vec4 color1)
+{
+    return color1.r; // todo: why did I have this abstraction in visvis?
+}
+
+vec4 applyColormap(float data) {
+    data = clamp(data, min(clim.x, clim.y), max(clim.x, clim.y));
+    data = (data - clim.x) / (clim.y - clim.x);
+    vec4 color = $cmap(pow(data, gamma));
+    return color;
+}
+
+
+vec4 calculateColor(vec4 betterColor, vec3 loc, vec3 step)
+{   
+    // Calculate color by incorporating lighting
+    vec4 color1;
+    vec4 color2;
+
+    // View direction
+    vec3 V = normalize(view_ray);
+
+    // calculate normal vector from gradient
+    vec3 N; // normal
+    color1 = $get_data(loc+vec3(-step[0],0.0,0.0) );
+    color2 = $get_data(loc+vec3(step[0],0.0,0.0) );
+    N[0] = colorToVal(color1) - colorToVal(color2);
+    betterColor = max(max(color1, color2),betterColor);
+    color1 = $get_data(loc+vec3(0.0,-step[1],0.0) );
+    color2 = $get_data(loc+vec3(0.0,step[1],0.0) );
+    N[1] = colorToVal(color1) - colorToVal(color2);
+    betterColor = max(max(color1, color2),betterColor);
+    color1 = $get_data(loc+vec3(0.0,0.0,-step[2]) );
+    color2 = $get_data(loc+vec3(0.0,0.0,step[2]) );
+    N[2] = colorToVal(color1) - colorToVal(color2);
+    betterColor = max(max(color1, color2),betterColor);
+    float gm = length(N); // gradient magnitude
+    N = normalize(N);
+
+    // Flip normal so it points towards viewer
+    float Nselect = float(dot(N,V) > 0.0);
+    N = (2.0*Nselect - 1.0) * N;  // ==  Nselect * N - (1.0-Nselect)*N;
+
+    // Get color of the texture (albeido)
+    color1 = betterColor;
+    color2 = color1;
+    // todo: parametrise color1_to_color2
+
+    // Init colors
+    vec4 ambient_color = vec4(0.0, 0.0, 0.0, 0.0);
+    vec4 diffuse_color = vec4(0.0, 0.0, 0.0, 0.0);
+    vec4 specular_color = vec4(0.0, 0.0, 0.0, 0.0);
+    vec4 final_color;
+
+    // todo: allow multiple light, define lights on viewvox or subscene
+    int nlights = 1; 
+    for (int i=0; i<nlights; i++)
+    { 
+        // Get light direction (make sure to prevent zero devision)
+        vec3 L = normalize(view_ray);  //lightDirs[i]; 
+        float lightEnabled = float( length(L) > 0.0 );
+        L = normalize(L+(1.0-lightEnabled));
+
+        // Calculate lighting properties
+        float lambertTerm = clamp( dot(N,L), 0.0, 1.0 );
+        vec3 H = normalize(L+V); // Halfway vector
+        float specularTerm = pow( max(dot(H,N),0.0), u_shininess);
+
+        // Calculate mask
+        float mask1 = lightEnabled;
+
+        // Calculate colors
+        ambient_color +=  mask1 * u_ambient;  // * gl_LightSource[i].ambient;
+        diffuse_color +=  mask1 * lambertTerm;
+        specular_color += mask1 * specularTerm * u_specular;
+    }
+
+    // Calculate final color by componing different components
+    final_color = color2 * ( ambient_color + diffuse_color) + specular_color;
+    final_color.a = color2.a;
+
+    // Done
+    return final_color;
+}
+
+
+vec3 intersectLinePlane(vec3 linePosition, 
+                        vec3 lineVector, 
+                        vec3 planePosition, 
+                        vec3 planeNormal) {
+    // function to find the intersection between a line and a plane
+    // line is defined by position and vector
+    // plane is defined by position and normal vector
+    // https://en.wikipedia.org/wiki/Line%E2%80%93plane_intersection
+
+    // find scale factor for line vector
+    float scaleFactor = dot(planePosition - linePosition, planeNormal) / 
+                        dot(lineVector, planeNormal);
+
+    // calculate intersection
+    return linePosition + ( scaleFactor * lineVector );
+}
+
+// for some reason, this has to be the last function in order for the
+// filters to be inserted in the correct place...
+
+void main() {
+    vec3 farpos = v_farpos.xyz / v_farpos.w;
+    vec3 nearpos = v_nearpos.xyz / v_nearpos.w;
+
+    // Calculate unit vector pointing in the view direction through this
+    // fragment.
+    view_ray = normalize(farpos.xyz - nearpos.xyz);
+
+    // Variables to keep track of where to set the frag depth.
+    // frag_depth_point is in data coordinates.
+    vec3 frag_depth_point;
+
+    // Set up the ray casting
+    // This snippet must define three variables:
+    // vec3 start_loc - the starting location of the ray in texture coordinates
+    // vec3 step - the step vector in texture coordinates
+    // int nsteps - the number of steps to make through the texture
+    
+    $raycasting_setup
+
+    // For testing: show the number of steps. This helps to establish
+    // whether the rays are correctly oriented
+    //gl_FragColor = vec4(0.0, f_nsteps / 3.0 / u_shape.x, 1.0, 1.0);
+    //return;
+
+    $before_loop
+
+    // This outer loop seems necessary on some systems for large
+    // datasets. Ugly, but it works ...
+    vec3 loc = start_loc;
+    int iter = 0;
+
+    // keep track if the texture is ever sampled; if not, fragment will be discarded
+    // this allows us to discard fragments that only traverse clipped parts of the texture
+    bool texture_sampled = false;
+
+    while (iter < nsteps) {
+        for (iter=iter; iter<nsteps; iter++)
+        {
+            // Only sample volume if loc is not clipped by clipping planes
+            float distance_from_clip = $clip_with_planes(loc, u_shape);
+            if (distance_from_clip >= 0)
+            {
+                // Get sample color
+                vec4 color = $get_data(loc);
+                float val = color.r;
+                texture_sampled = true;
+
+                $in_loop
+            }
+            // Advance location deeper into the volume
+            loc += step;
+        }
+    }
+
+    if (!texture_sampled)
+        discard;
+
+    $after_loop
+
+    // set frag depth
+    vec4 frag_depth_vector = vec4(frag_depth_point, 1);
+    vec4 iproj = $viewtransformf(frag_depth_vector);
+    iproj.z /= iproj.w;
+    gl_FragDepth = (iproj.z+1.0)/2.0;
+}
+"""  # noqa
+
+_RAYCASTING_SETUP_VOLUME = """
+    // Compute the distance to the front surface or near clipping plane
+    float distance = dot(nearpos-v_position, view_ray);
+    distance = max(distance, min((-0.5 - v_position.x) / view_ray.x,
+                            (u_shape.x - 0.5 - v_position.x) / view_ray.x));
+    distance = max(distance, min((-0.5 - v_position.y) / view_ray.y,
+                            (u_shape.y - 0.5 - v_position.y) / view_ray.y));
+    distance = max(distance, min((-0.5 - v_position.z) / view_ray.z,
+                            (u_shape.z - 0.5 - v_position.z) / view_ray.z));
+
+    // Now we have the starting position on the front surface
+    vec3 front = v_position + view_ray * distance;
+
+    // Decide how many steps to take
+    int nsteps = int(-distance / u_relative_step_size + 0.5);
+    float f_nsteps = float(nsteps);
+    if( nsteps < 1 )
+        discard;
+
+    // Get starting location and step vector in texture coordinates
+    vec3 step = ((v_position - front) / u_shape) / f_nsteps;
+    // 0.5 offset needed to get back to correct texture coordinates (vispy#2239)
+    vec3 start_loc = (front + 0.5) / u_shape;
+
+    // set frag depth to the cube face; this can be overridden by projection snippets
+    frag_depth_point = front;
+"""
+
+_RAYCASTING_SETUP_PLANE = """
+    // find intersection of view ray with plane in data coordinates
+    // 0.5 offset needed to get back to correct texture coordinates (vispy#2239)
+    vec3 intersection = intersectLinePlane(v_position.xyz, view_ray,
+                                           u_plane_position, u_plane_normal);
+    // and texture coordinates
+    vec3 intersection_tex = (intersection + 0.5) / u_shape;
+
+    // discard if intersection not in texture
+
+    float out_of_bounds = 0;
+
+    out_of_bounds += float(intersection_tex.x > 1);
+    out_of_bounds += float(intersection_tex.x < 0);
+    out_of_bounds += float(intersection_tex.y > 1);
+    out_of_bounds += float(intersection_tex.y < 0);
+    out_of_bounds += float(intersection_tex.z > 1);
+    out_of_bounds += float(intersection_tex.z < 0);
+
+    if (out_of_bounds > 0)
+        discard;
+
+
+    // Decide how many steps to take
+    int nsteps = int(u_plane_thickness / u_relative_step_size + 0.5);
+    float f_nsteps = float(nsteps);
+    if( nsteps < 1 )
+        discard;
+
+    // Get step vector and starting location in texture coordinates
+    // step vector is along plane normal
+    vec3 N = normalize(u_plane_normal);
+    vec3 step = N / u_shape;
+    vec3 start_loc = intersection_tex - ((step * f_nsteps) / 2);
+
+    // Ensure that frag depth value will be set to plane intersection
+    frag_depth_point = intersection;
+"""
+
+
+_MIP_SNIPPETS = dict(
+    before_loop="""
+        float maxval = u_mip_cutoff; // The maximum encountered value
+        int maxi = -1;  // Where the maximum value was encountered
+        """,
+    in_loop="""
+        if ( val > maxval ) {
+            maxval = val;
+            maxi = iter;
+            if ( maxval >= clim.y ) {
+                // stop if no chance of finding a higher maxval
+                iter = nsteps;
+            }
+        }
+        """,
+    after_loop="""
+        // Refine search for max value, but only if anything was found
+        if ( maxi > -1 ) {
+            // Calculate starting location of ray for sampling
+            vec3 start_loc_refine = start_loc + step * (float(maxi) - 0.5);
+            loc = start_loc_refine;
+
+            // Variables to keep track of current value and where max was encountered
+            vec3 max_loc_tex = start_loc_refine;
+
+            vec3 small_step = step * 0.1;
+            for (int i=0; i<10; i++) {
+                float val = $get_data(loc).r;
+                if ( val > maxval) {
+                    maxval = val;
+                    max_loc_tex = start_loc_refine + (small_step * i);
+                }
+                loc += small_step;
+            }
+            frag_depth_point = max_loc_tex * u_shape;
+            gl_FragColor = applyColormap(maxval);
+        } else {
+            discard;
+        }
+        """,
+)
+
+_ATTENUATED_MIP_SNIPPETS = dict(
+    before_loop="""
+        float maxval = u_mip_cutoff; // The maximum encountered value
+        float sumval = 0.0; // The sum of the encountered values
+        float scale = 0.0; // The cumulative attenuation
+        int maxi = -1;  // Where the maximum value was encountered
+        vec3 max_loc_tex = vec3(0.0);  // Location where the maximum value was encountered
+        """,
+    in_loop="""
+        // Scale and clamp accumulation in `sumval` by contrast limits so that:
+        // * attenuation value does not depend on data values
+        // * negative values do not amplify instead of attenuate
+        sumval = sumval + u_relative_step_size * clamp((val - clim.x) / (clim.y - clim.x), 0.0, 1.0);
+        scale = exp(-u_attenuation * (sumval - 1));
+        if( maxval > scale * clim.y ) {
+            // stop if no chance of finding a higher maxval
+            iter = nsteps;
+        } else if( val * scale > maxval ) {
+            maxval = val * scale;
+            maxi = iter;
+            max_loc_tex = loc;
+        }
+        """,
+    after_loop="""
+        if ( maxi > -1 ) {
+            frag_depth_point = max_loc_tex * u_shape;
+            gl_FragColor = applyColormap(maxval);
+        }
+        else {
+            discard;
+        }
+        """,
+)
+
+_MINIP_SNIPPETS = dict(
+    before_loop="""
+        float minval = u_minip_cutoff; // The minimum encountered value
+        int mini = -1;  // Where the minimum value was encountered
+        """,
+    in_loop="""
+        if ( val < minval ) {
+            minval = val;
+            mini = iter;
+            if ( minval <= clim.x ) {
+                // stop if no chance of finding a lower minval
+                iter = nsteps;
+            }
+        }
+        """,
+    after_loop="""
+        // Refine search for min value, but only if anything was found
+        if ( mini > -1 ) {
+            // Calculate starting location of ray for sampling
+            vec3 start_loc_refine = start_loc + step * (float(mini) - 0.5);
+            loc = start_loc_refine;
+
+            // Variables to keep track of current value and where max was encountered
+            vec3 min_loc_tex = start_loc_refine;
+
+            vec3 small_step = step * 0.1;
+            for (int i=0; i<10; i++) {
+                float val = $get_data(loc).r;
+                if ( val < minval) {
+                    minval = val;
+                    min_loc_tex = start_loc_refine + (small_step * i);
+                }
+                loc += small_step;
+            }
+            frag_depth_point = min_loc_tex * u_shape;
+            gl_FragColor = applyColormap(minval);
+        } else {
+            discard;
+        }
+        """,
+)
+
+_TRANSLUCENT_SNIPPETS = dict(
+    before_loop="""
+        vec4 integrated_color = vec4(0., 0., 0., 0.);
+        """,
+    in_loop="""
+        color = applyColormap(val);
+        float a1 = integrated_color.a;
+        float a2 = color.a * (1 - a1);
+        float alpha = max(a1 + a2, 0.001);
+
+        // Doesn't work.. GLSL optimizer bug?
+        //integrated_color = (integrated_color * a1 / alpha) +
+        //                   (color * a2 / alpha);
+        // This should be identical but does work correctly:
+        integrated_color *= a1 / alpha;
+        integrated_color += color * a2 / alpha;
+
+        integrated_color.a = alpha;
+
+        if( alpha > 0.99 ){
+            // stop integrating if the fragment becomes opaque
+            iter = nsteps;
+        }
+        """,
+    after_loop="""
+        gl_FragColor = integrated_color;
+        """,
+)
+
+_ADDITIVE_SNIPPETS = dict(
+    before_loop="""
+        vec4 integrated_color = vec4(0., 0., 0., 0.);
+        """,
+    in_loop="""
+        color = applyColormap(val);
+
+        integrated_color = 1.0 - (1.0 - integrated_color) * (1.0 - color);
+        """,
+    after_loop="""
+        gl_FragColor = integrated_color;
+        """,
+)
+
+_ISO_SNIPPETS = dict(
+    before_loop="""
+        vec4 color3 = vec4(0.0);  // final color
+        vec3 dstep = 1.5 / u_shape;  // step to sample derivative
+        gl_FragColor = vec4(0.0);
+        bool discard_fragment = true;
+    """,
+    in_loop="""
+        if (val > u_threshold-0.2) {
+            // Take the last interval in smaller steps
+            vec3 iloc = loc - step;
+            for (int i=0; i<10; i++) {
+                color = $get_data(iloc);
+                if (color.r > u_threshold) {
+                    color = calculateColor(color, iloc, dstep);
+                    gl_FragColor = applyColormap(color.r);
+
+                    // set the variables for the depth buffer
+                    frag_depth_point = iloc * u_shape;
+                    discard_fragment = false;
+
+                    iter = nsteps;
+                    break;
+                }
+                iloc += step * 0.1;
+            }
+        }
+        """,
+    after_loop="""
+        if (discard_fragment)
+            discard;
+    """,
+)
+
+
+_AVG_SNIPPETS = dict(
+    before_loop="""
+        float n = 0; // Counter for encountered values
+        float meanval = 0.0; // The mean of encountered values
+        float prev_mean = 0.0; // Variable to store the previous incremental mean
+        """,
+    in_loop="""
+        // Incremental mean value used for numerical stability
+        n += 1; // Increment the counter
+        prev_mean = meanval; // Update the mean for previous iteration
+        meanval = prev_mean + (val - prev_mean) / n; // Calculate the mean
+        """,
+    after_loop="""
+        // Apply colormap on mean value
+        gl_FragColor = applyColormap(meanval);
+        """,
+)
+
+_INTERPOLATION_TEMPLATE = """
+    #include "misc/spatial-filters.frag"
+    vec4 texture_lookup_filtered(vec3 texcoord) {
+        // no need to discard out of bounds, already checked during raycasting
+        return %s($texture, $shape, texcoord);
+    }"""
+
+_TEXTURE_LOOKUP = """
+    vec4 texture_lookup(vec3 texcoord) {
+        // no need to discard out of bounds, already checked during raycasting
+        return texture3D($texture, texcoord);
+    }"""
+
+
+class VolumeVisual(Visual):
+    """Displays a 3D Volume
+
+    Parameters
+    ----------
+    vol : ndarray
+        The volume to display. Must be ndim==3. Array is assumed to be stored
+        as ``(z, y, x)``.
+    clim : str | tuple
+        Limits to use for the colormap. I.e. the values that map to black and white
+        in a gray colormap. Can be 'auto' to auto-set bounds to
+        the min and max of the data. If not given or None, 'auto' is used.
+    method : {'mip', 'attenuated_mip', 'minip', 'translucent', 'additive',
+        'iso', 'average'}
+        The render method to use. See corresponding docs for details.
+        Default 'mip'.
+    threshold : float
+        The threshold to use for the isosurface render method. By default
+        the mean of the given volume is used.
+    attenuation: float
+        The attenuation rate to apply for the attenuated mip render method.
+        Default: 1.0.
+    relative_step_size : float
+        The relative step size to step through the volume. Default 0.8.
+        Increase to e.g. 1.5 to increase performance, at the cost of
+        quality.
+    cmap : str
+        Colormap to use.
+    gamma : float
+        Gamma to use during colormap lookup.  Final color will be cmap(val**gamma).
+        by default: 1.
+    interpolation : str
+        Selects method of texture interpolation. Makes use of the two hardware
+        interpolation methods and the available interpolation methods defined
+        in vispy/gloo/glsl/misc/spatial_filters.frag
+
+            * 'nearest': Default, uses 'nearest' with Texture interpolation.
+            * 'linear': uses 'linear' with Texture interpolation.
+            * 'hanning', 'hamming', 'hermite', 'kaiser', 'quadric', 'cubic',
+                'catrom', 'mitchell', 'spline16', 'spline36', 'gaussian',
+                'bessel', 'sinc', 'lanczos', 'blackman'
+    texture_format : numpy.dtype | str | None
+        How to store data on the GPU. OpenGL allows for many different storage
+        formats and schemes for the low-level texture data stored in the GPU.
+        Most common is unsigned integers or floating point numbers.
+        Unsigned integers are the most widely supported while other formats
+        may not be supported on older versions of OpenGL or with older GPUs.
+        Default value is ``None`` which means data will be scaled on the
+        CPU and the result stored in the GPU as an unsigned integer. If a
+        numpy dtype object, an internal texture format will be chosen to
+        support that dtype and data will *not* be scaled on the CPU. Not all
+        dtypes are supported. If a string, then
+        it must be one of the OpenGL internalformat strings described in the
+        table on this page: https://www.khronos.org/registry/OpenGL-Refpages/gl4/html/glTexImage2D.xhtml
+        The name should have `GL_` removed and be lowercase (ex.
+        `GL_R32F` becomes ``'r32f'``). Lastly, this can also be the string
+        ``'auto'`` which will use the data type of the provided volume data
+        to determine the internalformat of the texture.
+        When this is specified (not ``None``) data is scaled on the
+        GPU which allows for faster color limit changes. Additionally, when
+        32-bit float data is provided it won't be copied before being
+        transferred to the GPU. Note this visual is limited to "luminance"
+        formatted data (single band). This is equivalent to `GL_RED` format
+        in OpenGL 4.0.
+    raycasting_mode : {'volume', 'plane'}
+        Whether to cast a ray through the whole volume or perpendicular to a
+        plane through the volume defined.
+    plane_position : ArrayLike
+        A (3,) array containing a position on a plane of interest in the volume.
+        The position is defined in data coordinates. Only relevant in
+        raycasting_mode = 'plane'.
+    plane_normal : ArrayLike
+        A (3,) array containing a vector normal to the plane of interest in the
+        volume. The normal vector is defined in data coordinates. Only relevant
+        in raycasting_mode = 'plane'.
+    plane_thickness : float
+        A value defining the total length of the ray perpendicular to the
+        plane interrogated during rendering. Defined in data coordinates.
+        Only relevant in raycasting_mode = 'plane'.
+
+
+    .. versionchanged: 0.7
+
+        Deprecate 'emulate_texture' keyword argument.
+
+    """
+
+    _rendering_methods = {
+        'mip': _MIP_SNIPPETS,
+        'minip': _MINIP_SNIPPETS,
+        'attenuated_mip': _ATTENUATED_MIP_SNIPPETS,
+        'iso': _ISO_SNIPPETS,
+        'translucent': _TRANSLUCENT_SNIPPETS,
+        'additive': _ADDITIVE_SNIPPETS,
+        'average': _AVG_SNIPPETS
+    }
+
+    _raycasting_modes = {
+        'volume': _RAYCASTING_SETUP_VOLUME,
+        'plane': _RAYCASTING_SETUP_PLANE
+    }
+
+    _shaders = {
+        'vertex': _VERTEX_SHADER,
+        'fragment': _FRAGMENT_SHADER,
+    }
+
+    _func_templates = {
+        'texture_lookup_interpolated': _INTERPOLATION_TEMPLATE,
+        'texture_lookup': _TEXTURE_LOOKUP,
+    }
+
+    def __init__(self, vol, clim="auto", method='mip', threshold=None,
+                 attenuation=1.0, relative_step_size=0.8, cmap='grays',
+                 gamma=1.0, interpolation='linear', texture_format=None,
+                 raycasting_mode='volume', plane_position=None,
+                 plane_normal=None, plane_thickness=1.0, clipping_planes=None,
+                 clipping_planes_coord_system='scene', mip_cutoff=None,
+                 minip_cutoff=None):
+
+        tr = ['visual', 'scene', 'document', 'canvas', 'framebuffer', 'render']
+        if clipping_planes_coord_system not in tr:
+            raise ValueError(f'Invalid coordinate system {clipping_planes_coord_system}. Must be one of {tr}.')
+        self._clipping_planes_coord_system = clipping_planes_coord_system
+        self._clip_transform = None
+        # Storage of information of volume
+        self._vol_shape = ()
+        self._gamma = gamma
+        self._raycasting_mode = raycasting_mode
+        self._need_vertex_update = True
+        # Set the colormap
+        self._cmap = get_colormap(cmap)
+        self._is_zyx = True
+
+        # Create gloo objects
+        self._vertices = VertexBuffer()
+
+        kernel, interpolation_methods = load_spatial_filters()
+        self._kerneltex = Texture2D(kernel, interpolation='nearest')
+        interpolation_methods, interpolation_fun = self._init_interpolation(
+            interpolation_methods)
+        self._interpolation_methods = interpolation_methods
+        self._interpolation_fun = interpolation_fun
+        self._interpolation = interpolation
+        if self._interpolation not in self._interpolation_methods:
+            raise ValueError("interpolation must be one of %s" %
+                             ', '.join(self._interpolation_methods))
+        self._data_lookup_fn = None
+        self._need_interpolation_update = True
+
+        self._texture = self._create_texture(texture_format, vol)
+        # used to store current data for later CPU-side scaling if
+        # texture_format is None
+        self._last_data = None
+
+        # Create program
+        Visual.__init__(self, vcode=self._shaders['vertex'], fcode=self._shaders['fragment'])
+        self.shared_program['u_volumetex'] = self._texture
+        self.shared_program['a_position'] = self._vertices
+        self.shared_program['gamma'] = self._gamma
+        self._draw_mode = 'triangle_strip'
+        self._index_buffer = IndexBuffer()
+
+        # Only show back faces of cuboid. This is required because if we are
+        # inside the volume, then the front faces are outside of the clipping
+        # box and will not be drawn.
+        self.set_gl_state('translucent', cull_face=False)
+
+        # Apply clim and set data at the same time
+        self.set_data(vol, clim or "auto")
+
+        # Set params
+        self.raycasting_mode = raycasting_mode
+        self.mip_cutoff = mip_cutoff
+        self.minip_cutoff = minip_cutoff
+        self.method = method
+        self.relative_step_size = relative_step_size
+        self.threshold = threshold if threshold is not None else vol.mean()
+        self.attenuation = attenuation
+
+        # Set plane params
+        if plane_position is None:
+            self.plane_position = [x / 2 for x in vol.shape]
+        else:
+            self.plane_position = plane_position
+        if plane_normal is None:
+            self.plane_normal = [1, 0, 0]
+        else:
+            self.plane_normal = plane_normal
+        self.plane_thickness = plane_thickness
+
+        self.clipping_planes = clipping_planes
+
+        self.freeze()
+
+    def _init_interpolation(self, interpolation_methods):
+        # create interpolation shader functions for available
+        # interpolations
+        fun = [Function(self._func_templates['texture_lookup_interpolated'] % (n + '3D'))
+               for n in interpolation_methods]
+        interpolation_methods = [n.lower() for n in interpolation_methods]
+
+        interpolation_fun = dict(zip(interpolation_methods, fun))
+        interpolation_methods = tuple(sorted(interpolation_methods))
+
+        # overwrite "nearest" and "linear" spatial-filters
+        # with  "hardware" interpolation _data_lookup_fn
+        hardware_lookup = Function(self._func_templates['texture_lookup'])
+        interpolation_fun['nearest'] = hardware_lookup
+        interpolation_fun['linear'] = hardware_lookup
+        # alias bicubic to cubic (but deprecate)
+        interpolation_methods = interpolation_methods + ('bicubic',)
+        return interpolation_methods, interpolation_fun
+
+    def _create_texture(self, texture_format, data):
+        if texture_format is not None:
+            tex_cls = GPUScaledTextured3D
+        else:
+            tex_cls = CPUScaledTexture3D
+
+        if self._interpolation == 'linear':
+            texture_interpolation = 'linear'
+        else:
+            texture_interpolation = 'nearest'
+
+        # clamp_to_edge means any texture coordinates outside of 0-1 should be
+        # clamped to 0 and 1.
+        # NOTE: This doesn't actually set the data in the texture. Only
+        # creates a placeholder texture that will be resized later on.
+        return tex_cls(data, interpolation=texture_interpolation,
+                       internalformat=texture_format,
+                       format='luminance',
+                       wrapping='clamp_to_edge')
+
+    def set_data(self, vol, clim=None, copy=True):
+        """Set the volume data.
+
+        Parameters
+        ----------
+        vol : ndarray
+            The 3D volume.
+        clim : tuple
+            Colormap limits to use (min, max). None will use the min and max
+            values. Defaults to ``None``.
+        copy : bool
+            Whether to copy the input volume prior to applying clim
+            normalization on the CPU. Has no effect if visual was created
+            with 'texture_format' not equal to None as data is not modified
+            on the CPU and data must already be copied to the GPU.
+            Data must be 32-bit floating point data to completely avoid any
+            data copying when scaling on the CPU. Defaults to ``True`` for
+            CPU scaled data. It is forced to ``False`` for GPU scaled data.
+
+        """
+        # Check volume
+        if not isinstance(vol, np.ndarray):
+            raise ValueError('Volume visual needs a numpy array.')
+        if not ((vol.ndim == 3) or (vol.ndim == 4 and vol.shape[-1] > 1)):
+            raise ValueError('Volume visual needs a 3D array.')
+        if isinstance(self._texture, GPUScaledTextured3D):
+            copy = False
+
+        if clim is not None and clim != self._texture.clim:
+            self._texture.set_clim(clim)
+
+        # Apply to texture
+        self._texture.check_data_format(vol)
+        self._last_data = vol
+        self._texture.scale_and_set_data(vol, copy=copy)
+        self.shared_program['clim'] = self._texture.clim_normalized
+        self.shared_program['u_shape'] = (vol.shape[2], vol.shape[1],
+                                          vol.shape[0])
+
+        shape = vol.shape[:3]
+        if self._vol_shape != shape:
+            self._vol_shape = shape
+            self._need_vertex_update = True
+        self._vol_shape = shape
+
+    @property
+    def rendering_methods(self):
+        return list(self._rendering_methods)
+
+    @property
+    def raycasting_modes(self):
+        return list(self._raycasting_modes)
+
+    @property
+    def clim(self):
+        """The contrast limits that were applied to the volume data.
+
+        Volume display is mapped from black to white with these values.
+        Settable via set_data() as well as @clim.setter.
+        """
+        return self._texture.clim
+
+    @clim.setter
+    def clim(self, value):
+        """Set contrast limits used when rendering the image.
+
+        ``value`` should be a 2-tuple of floats (min_clim, max_clim), where each value is
+        within the range set by self.clim. If the new value is outside of the (min, max)
+        range of the clims previously used to normalize the texture data, then data will
+        be renormalized using set_data.
+        """
+        if self._texture.set_clim(value):
+            self.set_data(self._last_data, clim=value)
+        self.shared_program['clim'] = self._texture.clim_normalized
+        self.update()
+
+    @property
+    def gamma(self):
+        """The gamma used when rendering the image."""
+        return self._gamma
+
+    @gamma.setter
+    def gamma(self, value):
+        """Set gamma used when rendering the image."""
+        if value <= 0:
+            raise ValueError("gamma must be > 0")
+        self._gamma = float(value)
+        self.shared_program['gamma'] = self._gamma
+        self.update()
+
+    @property
+    def cmap(self):
+        return self._cmap
+
+    @cmap.setter
+    def cmap(self, cmap):
+        self._cmap = get_colormap(cmap)
+        self.shared_program.frag['cmap'] = Function(self._cmap.glsl_map)
+        self.shared_program['texture2D_LUT'] = self.cmap.texture_lut()
+        self.update()
+
+    @property
+    def interpolation_methods(self):
+        return self._interpolation_methods
+
+    @property
+    def interpolation(self):
+        """Get interpolation algorithm name."""
+        return self._interpolation
+
+    @interpolation.setter
+    def interpolation(self, i):
+        if i not in self._interpolation_methods:
+            raise ValueError("interpolation must be one of %s" %
+                             ', '.join(self._interpolation_methods))
+        if self._interpolation != i:
+            self._interpolation = i
+            self._need_interpolation_update = True
+            self.update()
+
+    # The interpolation code could be transferred to a dedicated filter
+    # function in visuals/filters as discussed in #1051
+    def _build_interpolation(self):
+        """Rebuild the _data_lookup_fn for different interpolations."""
+        interpolation = self._interpolation
+        # alias bicubic to cubic
+        if interpolation == 'bicubic':
+            warnings.warn(
+                "'bicubic' interpolation is Deprecated. Use 'cubic' instead.",
+                DeprecationWarning,
+                stacklevel=2,
+            )
+            interpolation = 'cubic'
+        self._data_lookup_fn = self._interpolation_fun[interpolation]
+        try:
+            self.shared_program.frag['get_data'] = self._data_lookup_fn
+        except Exception as e:
+            print(e)
+
+        # only 'linear' uses 'linear' texture interpolation
+        if interpolation == 'linear':
+            texture_interpolation = 'linear'
+        else:
+            # 'nearest' (and also 'linear') doesn't use spatial_filters.frag
+            # so u_kernel and shape setting is skipped
+            texture_interpolation = 'nearest'
+            if interpolation != 'nearest':
+                self.shared_program['u_kernel'] = self._kerneltex
+                self._data_lookup_fn['shape'] = self._last_data.shape[:3][::-1]
+
+        if self._texture.interpolation != texture_interpolation:
+            self._texture.interpolation = texture_interpolation
+
+        self._data_lookup_fn['texture'] = self._texture
+
+        self._need_interpolation_update = False
+
+    @staticmethod
+    @lru_cache(maxsize=10)
+    def _build_clipping_planes_glsl(n_planes: int) -> str:
+        """Build the code snippet used to clip the volume based on self.clipping_planes."""
+        func_template = '''
+            float clip_planes(vec3 loc, vec3 vol_shape) {{
+                vec3 loc_transf = $clip_transform(vec4(loc * vol_shape, 1)).xyz;
+                float distance_from_clip = 3.4e38; // max float
+                {clips};
+                return distance_from_clip;
+            }}
+        '''
+        # the vertex is considered clipped if on the "negative" side of the plane
+        clip_template = '''
+            vec3 relative_vec{idx} = loc_transf - $clipping_plane_pos{idx};
+            float distance_from_clip{idx} = dot(relative_vec{idx}, $clipping_plane_norm{idx});
+            distance_from_clip = min(distance_from_clip{idx}, distance_from_clip);
+            '''
+        all_clips = []
+        for idx in range(n_planes):
+            all_clips.append(clip_template.format(idx=idx))
+        formatted_code = func_template.format(clips=''.join(all_clips))
+        return formatted_code
+
+    @property
+    def clipping_planes(self) -> np.ndarray:
+        """The set of planes used to clip the volume. Values on the negative side of the normal are discarded.
+
+        Each plane is defined by a position and a normal vector (magnitude is irrelevant). Shape: (n_planes, 2, 3).
+        The order is xyz, as opposed to data's zyx (for consistency with the rest of vispy)
+
+        Example: one plane in position (0, 0, 0) and with normal (0, 0, 1),
+        and a plane in position (1, 1, 1) with normal (0, 1, 0):
+
+        >>> volume.clipping_planes = np.array([
+        >>>     [[0, 0, 0], [0, 0, 1]],
+        >>>     [[1, 1, 1], [0, 1, 0]],
+        >>> ])
+
+        """
+        return self._clipping_planes
+
+    @clipping_planes.setter
+    def clipping_planes(self, value: Optional[np.ndarray]):
+        if value is None:
+            value = np.empty([0, 2, 3])
+        self._clipping_planes = value
+
+        self._clip_func = Function(self._build_clipping_planes_glsl(len(value)))
+        self.shared_program.frag['clip_with_planes'] = self._clip_func
+
+        self._clip_func['clip_transform'] = self._clip_transform
+        for idx, plane in enumerate(value):
+            self._clip_func[f'clipping_plane_pos{idx}'] = tuple(plane[0])
+            self._clip_func[f'clipping_plane_norm{idx}'] = tuple(plane[1])
+        self.update()
+
+    @property
+    def clipping_planes_coord_system(self) -> str:
+        """
+        Coordinate system used by the clipping planes (see visuals.transforms.transform_system.py)
+        """
+        return self._clipping_planes_coord_system
+
+    @property
+    def _before_loop_snippet(self):
+        return self._rendering_methods[self.method]['before_loop']
+
+    @property
+    def _in_loop_snippet(self):
+        return self._rendering_methods[self.method]['in_loop']
+
+    @property
+    def _after_loop_snippet(self):
+        return self._rendering_methods[self.method]['after_loop']
+
+    @property
+    def method(self):
+        """The render method to use
+
+        Current options are:
+
+            * translucent: voxel colors are blended along the view ray until
+              the result is opaque.
+            * mip: maxiumum intensity projection. Cast a ray and display the
+              maximum value that was encountered.
+            * minip: minimum intensity projection. Cast a ray and display the
+              minimum value that was encountered.
+            * attenuated_mip: attenuated maximum intensity projection. Cast a
+              ray and display the maximum value encountered. Values are
+              attenuated as the ray moves deeper into the volume.
+            * additive: voxel colors are added along the view ray until
+              the result is saturated.
+            * iso: isosurface. Cast a ray until a certain threshold is
+              encountered. At that location, lighning calculations are
+              performed to give the visual appearance of a surface.
+            * average: average intensity projection. Cast a ray and display the
+              average of values that were encountered.
+        """
+        return self._method
+
+    @method.setter
+    def method(self, method):
+        # Check and save
+        known_methods = list(self._rendering_methods.keys())
+        if method not in known_methods:
+            raise ValueError('Volume render method should be in %r, not %r' %
+                             (known_methods, method))
+        self._method = method
+
+        # $get_data needs to be unset and re-set, since it's present inside the snippets.
+        #       Program should probably be able to do this automatically
+        self.shared_program.frag['get_data'] = None
+        self.shared_program.frag['raycasting_setup'] = self._raycasting_setup_snippet
+        self.shared_program.frag['before_loop'] = self._before_loop_snippet
+        self.shared_program.frag['in_loop'] = self._in_loop_snippet
+        self.shared_program.frag['after_loop'] = self._after_loop_snippet
+        self.shared_program.frag['sampler_type'] = self._texture.glsl_sampler_type
+        self.shared_program.frag['cmap'] = Function(self._cmap.glsl_map)
+        self.shared_program['texture2D_LUT'] = self.cmap.texture_lut()
+        self.shared_program['u_mip_cutoff'] = self._mip_cutoff
+        self.shared_program['u_minip_cutoff'] = self._minip_cutoff
+        self._need_interpolation_update = True
+        self.update()
+
+    @property
+    def _raycasting_setup_snippet(self):
+        return self._raycasting_modes[self.raycasting_mode]
+
+    @property
+    def raycasting_mode(self):
+        """The raycasting mode to use.
+
+        This defines whether to cast a ray through the whole volume or
+        perpendicular to a plane through the volume.
+        must be in {'volume', 'plane'}
+        """
+        return self._raycasting_mode
+
+    @raycasting_mode.setter
+    def raycasting_mode(self, value: str):
+        valid_raycasting_modes = self._raycasting_modes.keys()
+        if value not in valid_raycasting_modes:
+            raise ValueError(f"Raycasting mode should be in {valid_raycasting_modes}, not {value}")
+        self._raycasting_mode = value
+        self.shared_program.frag['raycasting_setup'] = self._raycasting_setup_snippet
+        self.update()
+
+    @property
+    def threshold(self):
+        """The threshold value to apply for the isosurface render method."""
+        return self._threshold
+
+    @threshold.setter
+    def threshold(self, value):
+        self._threshold = float(value)
+        self.shared_program['u_threshold'] = self._threshold
+        self.update()
+
+    @property
+    def attenuation(self):
+        """The attenuation rate to apply for the attenuated mip render method."""
+        return self._attenuation
+
+    @attenuation.setter
+    def attenuation(self, value):
+        self._attenuation = float(value)
+        self.shared_program['u_attenuation'] = self._attenuation
+        self.update()
+
+    @property
+    def relative_step_size(self):
+        """The relative step size used during raycasting.
+
+        Larger values yield higher performance at reduced quality. If
+        set > 2.0 the ray skips entire voxels. Recommended values are
+        between 0.5 and 1.5. The amount of quality degredation depends
+        on the render method.
+        """
+        return self._relative_step_size
+
+    @relative_step_size.setter
+    def relative_step_size(self, value):
+        """Set the relative step size used during raycasting.
+
+        Very small values give increased detail when rendering volumes with
+        few voxels, but values that are too small give worse performance
+        (framerate), in extreme cases causing a GPU hang and for the process
+        to be killed by the OS. See discussion at:
+
+        https://github.com/vispy/vispy/pull/2587
+
+        For this reason, this setter issues a warning when the value is
+        smaller than ``side_len / (2 * MAX_CANVAS_SIZE)``, where ``side_len``
+        is the smallest side of the volume and ``MAX_CANVAS_SIZE`` is what
+        we consider to be the largest likely monitor resolution along its
+        longest side: 7680 pixels, equivalent to an 8K monitor.
+
+        This setter also raises a ValueError when the value is 0 or negative.
+        """
+        value = float(value)
+        side_len = np.min(self._vol_shape)
+        MAX_CANVAS_SIZE = 7680
+        minimum_val = side_len / (2 * MAX_CANVAS_SIZE)
+        if value <= 0:
+            raise ValueError('relative_step_size cannot be 0 or negative.')
+        elif value < minimum_val:
+            warnings.warn(
+                f'To display a volume of shape {self._vol_shape} without '
+                f'artifacts, you need a step size no smaller than {side_len} /'
+                f'(2 * {MAX_CANVAS_SIZE}) = {minimum_val:,.3g}. To prevent '
+                'extreme degradation in rendering performance, the provided '
+                f'value of {value} is being clipped to {minimum_val:,.3g}. If '
+                'you believe you need a smaller step size, please raise an '
+                'issue at https://github.com/vispy/vispy/issues.'
+            )
+            value = minimum_val
+        self._relative_step_size = value
+        self.shared_program['u_relative_step_size'] = value
+
+    @property
+    def plane_position(self):
+        """Position on a plane through the volume.
+
+        A (3,) array containing a position on a plane of interest in the volume.
+        The position is defined in data coordinates. Only relevant in
+        raycasting_mode = 'plane'.
+        """
+        return self._plane_position
+
+    @plane_position.setter
+    def plane_position(self, value):
+        value = np.array(value, dtype=np.float32).ravel()
+        if value.shape != (3, ):
+            raise ValueError('plane_position must be a 3 element array-like object')
+        self._plane_position = value
+        self.shared_program['u_plane_position'] = value[::-1]
+        self.update()
+
+    @property
+    def plane_normal(self):
+        """Direction normal to a plane through the volume.
+
+        A (3,) array containing a vector normal to the plane of interest in the
+        volume. The normal vector is defined in data coordinates. Only relevant
+        in raycasting_mode = 'plane'.
+        """
+        return self._plane_normal
+
+    @plane_normal.setter
+    def plane_normal(self, value):
+        value = np.array(value, dtype=np.float32).ravel()
+        if value.shape != (3, ):
+            raise ValueError('plane_normal must be a 3 element array-like object')
+        self._plane_normal = value
+        self.shared_program['u_plane_normal'] = value[::-1]
+        self.update()
+
+    @property
+    def plane_thickness(self):
+        """Thickness of a plane through the volume.
+
+        A value defining the total length of the ray perpendicular to the
+        plane interrogated during rendering. Defined in data coordinates.
+        Only relevant in raycasting_mode = 'plane'.
+        """
+        return self._plane_thickness
+
+    @plane_thickness.setter
+    def plane_thickness(self, value: float):
+        value = float(value)
+        if value < 1:
+            raise ValueError('plane_thickness should be at least 1.0')
+        self._plane_thickness = value
+        self.shared_program['u_plane_thickness'] = value
+        self.update()
+
+    @property
+    def mip_cutoff(self):
+        """The lower cutoff value for `mip` and `attenuated_mip`.
+
+        When using the `mip` or `attenuated_mip` rendering methods, fragments
+        with values below the cutoff will be discarded.
+        """
+        return self._mip_cutoff
+
+    @mip_cutoff.setter
+    def mip_cutoff(self, value):
+        if value is None:
+            value = np.finfo('float32').min
+        self._mip_cutoff = float(value)
+        self.shared_program['u_mip_cutoff'] = self._mip_cutoff
+        self.update()
+
+    @property
+    def minip_cutoff(self):
+        """The upper cutoff value for `minip`.
+
+        When using the `minip` rendering method, fragments
+        with values above the cutoff will be discarded.
+        """
+        return self._minip_cutoff
+
+    @minip_cutoff.setter
+    def minip_cutoff(self, value):
+        if value is None:
+            value = np.finfo('float32').max
+        self._minip_cutoff = float(value)
+        self.shared_program['u_minip_cutoff'] = self._minip_cutoff
+        self.update()
+
+    def _create_vertex_data(self):
+        """Create and set positions and texture coords from the given shape
+
+        We have six faces with 1 quad (2 triangles) each, resulting in
+        6*2*3 = 36 vertices in total.
+        """
+        shape = self._vol_shape
+
+        # Get corner coordinates. The -0.5 offset is to center
+        # pixels/voxels. This works correctly for anisotropic data.
+        x0, x1 = -0.5, shape[2] - 0.5
+        y0, y1 = -0.5, shape[1] - 0.5
+        z0, z1 = -0.5, shape[0] - 0.5
+
+        pos = np.array([
+            [x0, y0, z0],
+            [x1, y0, z0],
+            [x0, y1, z0],
+            [x1, y1, z0],
+            [x0, y0, z1],
+            [x1, y0, z1],
+            [x0, y1, z1],
+            [x1, y1, z1],
+        ], dtype=np.float32)
+
+        """
+          6-------7
+         /|      /|
+        4-------5 |
+        | |     | |
+        | 2-----|-3
+        |/      |/
+        0-------1
+        """
+
+        # Order is chosen such that normals face outward; front faces will be
+        # culled.
+        indices = np.array([2, 6, 0, 4, 5, 6, 7, 2, 3, 0, 1, 5, 3, 7],
+                           dtype=np.uint32)
+
+        # Apply
+        self._vertices.set_data(pos)
+        self._index_buffer.set_data(indices)
+
+    def _compute_bounds(self, axis, view):
+        if self._is_zyx:
+            # axis=(x, y, z) -> shape(..., z, y, x)
+            ndim = len(self._vol_shape)
+            return 0, self._vol_shape[ndim - 1 - axis]
+        else:
+            # axis=(x, y, z) -> shape(x, y, z)
+            return 0, self._vol_shape[axis]
+
+    def _prepare_transforms(self, view):
+        trs = view.transforms
+        view.view_program.vert['transform'] = trs.get_transform()
+
+        view_tr_f = trs.get_transform('visual', 'document')
+        view_tr_i = view_tr_f.inverse
+        view.view_program.vert['viewtransformf'] = view_tr_f
+        view.view_program.vert['viewtransformi'] = view_tr_i
+        view.view_program.frag['viewtransformf'] = view_tr_f
+
+        self._clip_transform = trs.get_transform('visual', self._clipping_planes_coord_system)
+
+    def _prepare_draw(self, view):
+        if self._need_vertex_update:
+            self._create_vertex_data()
+
+        if self._need_interpolation_update:
+            self._build_interpolation()