quarchpy 2.2.9.dev4__py2.py3-none-any.whl → 2.2.9.dev5__py2.py3-none-any.whl

quarchpy/connection_specific/jdk_j21_jres/win_amd64_jdk_21_jre/conf/management/management.properties

@@ -1,327 +1,327 @@
-#####################################################################
-#	Default Configuration File for Java Platform Management
-#####################################################################
-#
-# The Management Configuration file (in java.util.Properties format)
-# will be read if one of the following system properties is set:
-#    -Dcom.sun.management.jmxremote.port=<port-number>
-# or -Dcom.sun.management.config.file=<this-file>
-#
-# The default Management Configuration file is:
-#
-#       $JRE/conf/management/management.properties
-#
-# Another location for the Management Configuration File can be specified
-# by the following property on the Java command line:
-#
-#    -Dcom.sun.management.config.file=<this-file>
-#
-# If -Dcom.sun.management.config.file=<this-file> is set, the port
-# number for the management agent can be specified in the config file
-# using the following lines:
-#
-# ################ Management Agent Port #########################
-#
-# For setting the JMX RMI agent port use the following line
-# com.sun.management.jmxremote.port=<port-number>
-#
-# For setting the JMX local server port use the following line
-# com.sun.management.jmxremote.local.port=<port-number>
-
-#####################################################################
-#                   Optional Instrumentation
-#####################################################################
-#
-# By default only the basic instrumentation with low overhead is on.
-# The following properties allow to selectively turn on optional
-# instrumentation which are off by default and may have some
-# additional overhead.
-#
-# com.sun.management.enableThreadContentionMonitoring
-#
-#      This option enables thread contention monitoring if the
-#      Java virtual machine supports such instrumentation.
-#      Refer to the specification for the java.lang.management.ThreadMXBean
-#      interface - see isThreadContentionMonitoringSupported() method.
-#
-
-# To enable thread contention monitoring, uncomment the following line
-# com.sun.management.enableThreadContentionMonitoring
-
-#####################################################################
-#			RMI Management Properties
-#####################################################################
-#
-# If system property -Dcom.sun.management.jmxremote.port=<port-number>
-# is set then
-#     - A MBean server is started
-#     - JRE Platform MBeans are registered in the MBean server
-#     - RMI connector is published  in a private readonly registry at
-#       specified port using a well known name, "jmxrmi"
-#     - the following properties are read for JMX remote management.
-#
-# The configuration can be specified only at startup time.
-# Later changes to above system property (e.g. via setProperty method),
-# this config file, the password file, or the access file have no effect to the
-# running MBean server, the connector, or the registry.
-#
-
-#
-# ########## RMI connector settings for local management ##########
-#
-# com.sun.management.jmxremote.local.only=true|false
-#      Default for this property is true. (Case for true/false ignored)
-#      If this property is specified as true then the local JMX RMI connector
-#      server will only accept connection requests from clients running on
-#      the host where the out-of-the-box JMX management agent is running.
-#      In order to ensure backwards compatibility this property could be
-#      set to false. However, deploying the local management agent in this
-#      way is discouraged because the local JMX RMI connector server will
-#      accept connection requests from any client either local or remote.
-#      For remote management the remote JMX RMI connector server should
-#      be used instead with authentication and SSL/TLS encryption enabled.
-#
-
-# For allowing the local management agent accept local
-# and remote connection requests use the following line
-# com.sun.management.jmxremote.local.only=false
-
-#
-# ###################### RMI SSL #############################
-#
-# com.sun.management.jmxremote.ssl=true|false
-#      Default for this property is true. (Case for true/false ignored)
-#      If this property is specified as false then SSL is not used.
-#
-
-# For RMI monitoring without SSL use the following line
-# com.sun.management.jmxremote.ssl=false
-
-# com.sun.management.jmxremote.ssl.config.file=filepath
-#      Specifies the location of the SSL configuration file. A properties
-#      file can be used to supply the keystore and truststore location and
-#      password settings thus avoiding to pass them as cleartext in the
-#      command-line.
-#
-#      The current implementation of the out-of-the-box management agent will
-#      look up and use the properties specified below to configure the SSL
-#      keystore and truststore, if present:
-#          javax.net.ssl.keyStore=<keystore-location>
-#          javax.net.ssl.keyStorePassword=<keystore-password>
-#          javax.net.ssl.trustStore=<truststore-location>
-#          javax.net.ssl.trustStorePassword=<truststore-password>
-#      Any other properties in the file will be ignored. This will allow us
-#      to extend the property set in the future if required by the default
-#      SSL implementation.
-#
-#      If the property "com.sun.management.jmxremote.ssl" is set to false,
-#      then this property is ignored.
-#
-
-# For supplying the keystore settings in a file use the following line
-# com.sun.management.jmxremote.ssl.config.file=filepath
-
-# com.sun.management.jmxremote.ssl.enabled.cipher.suites=<cipher-suites>
-#      The value of this property is a string that is a comma-separated list
-#      of SSL/TLS cipher suites to enable. This property can be specified in
-#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
-#      in order to control which particular SSL/TLS cipher suites are enabled
-#      for use by accepted connections. If this property is not specified then
-#      the SSL/TLS RMI Server Socket Factory uses the SSL/TLS cipher suites that
-#      are enabled by default.
-#
-
-# com.sun.management.jmxremote.ssl.enabled.protocols=<protocol-versions>
-#      The value of this property is a string that is a comma-separated list
-#      of SSL/TLS protocol versions to enable. This property can be specified in
-#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
-#      in order to control which particular SSL/TLS protocol versions are
-#      enabled for use by accepted connections. If this property is not
-#      specified then the SSL/TLS RMI Server Socket Factory uses the SSL/TLS
-#      protocol versions that are enabled by default.
-#
-
-# com.sun.management.jmxremote.ssl.need.client.auth=true|false
-#      Default for this property is false. (Case for true/false ignored)
-#      If this property is specified as true in conjunction with the previous
-#      property "com.sun.management.jmxremote.ssl" then the SSL/TLS RMI Server
-#      Socket Factory will require client authentication.
-#
-
-# For RMI monitoring with SSL client authentication use the following line
-# com.sun.management.jmxremote.ssl.need.client.auth=true
-
-# com.sun.management.jmxremote.registry.ssl=true|false
-#      Default for this property is false. (Case for true/false ignored)
-#      If this property is specified as true then the RMI registry used
-#      to bind the RMIServer remote object is protected with SSL/TLS
-#      RMI Socket Factories that can be configured with the properties:
-#          com.sun.management.jmxremote.ssl.config.file
-#          com.sun.management.jmxremote.ssl.enabled.cipher.suites
-#          com.sun.management.jmxremote.ssl.enabled.protocols
-#          com.sun.management.jmxremote.ssl.need.client.auth
-#      If the two properties below are true at the same time, i.e.
-#          com.sun.management.jmxremote.ssl=true
-#          com.sun.management.jmxremote.registry.ssl=true
-#      then the RMIServer remote object and the RMI registry are
-#      both exported with the same SSL/TLS RMI Socket Factories.
-#
-
-# For using an SSL/TLS protected RMI registry use the following line
-# com.sun.management.jmxremote.registry.ssl=true
-
-#
-# ################ RMI User authentication ################
-#
-# com.sun.management.jmxremote.authenticate=true|false
-#      Default for this property is true. (Case for true/false ignored)
-#      If this property is specified as false then no authentication is
-#      performed and all users are allowed all access.
-#
-
-# For RMI monitoring without any checking use the following line
-# com.sun.management.jmxremote.authenticate=false
-
-#
-# ################ RMI Login configuration ###################
-#
-# com.sun.management.jmxremote.login.config=<config-name>
-#      Specifies the name of a JAAS login configuration entry to use when
-#      authenticating users of RMI monitoring.
-#
-#      Setting this property is optional - the default login configuration
-#      specifies a file-based authentication that uses the password file.
-#
-#      When using this property to override the default login configuration
-#      then the named configuration entry must be in a file that gets loaded
-#      by JAAS. In addition, the login module(s) specified in the configuration
-#      should use the name and/or password callbacks to acquire the user's
-#      credentials. See the NameCallback and PasswordCallback classes in the
-#      javax.security.auth.callback package for more details.
-#
-#      If the property "com.sun.management.jmxremote.authenticate" is set to
-#      false, then this property and the password & access files are ignored.
-#
-
-# For a non-default login configuration use the following line
-# com.sun.management.jmxremote.login.config=<config-name>
-
-#
-# ################ RMI Password file location ##################
-#
-# com.sun.management.jmxremote.password.file=filepath
-#      Specifies location for password file
-#      This is optional - default location is
-#      $JRE/conf/management/jmxremote.password
-#
-#      If the property "com.sun.management.jmxremote.authenticate" is set to
-#      false, then this property and the password & access files are ignored.
-#      Otherwise the password file must exist and be in the valid format.
-#      If the password file is empty or non-existent then no access is allowed.
-#
-
-# For a non-default password file location use the following line
-# com.sun.management.jmxremote.password.file=filepath
-
-#
-# ################# Hash passwords in password file ##############
-# com.sun.management.jmxremote.password.toHashes = true|false
-#      Default for this property is true.
-#      Specifies if passwords in the password file should be hashed or not.
-#      If this property is true, and if the password file is writable, and if the
-#      system security policy allows writing into the password file,
-#      all the clear passwords in the password file will be replaced by
-#      their SHA3-512 hash when the file is read by the server
-#
-
-#
-# ################ RMI Access file location #####################
-#
-# com.sun.management.jmxremote.access.file=filepath
-#      Specifies location for access  file
-#      This is optional - default location is
-#      $JRE/conf/management/jmxremote.access
-#
-#      If the property "com.sun.management.jmxremote.authenticate" is set to
-#      false, then this property and the password & access files are ignored.
-#      Otherwise, the access file must exist and be in the valid format.
-#      If the access file is empty or non-existent then no access is allowed.
-#
-
-# For a non-default password file location use the following line
-# com.sun.management.jmxremote.access.file=filepath
-#
-
-# ################ Management agent listen interface #########################
-#
-# com.sun.management.jmxremote.host=<host-or-interface-name>
-#      Specifies the local interface on which the JMX RMI agent will bind.
-#      This is useful when running on machines which have several
-#      interfaces defined. It makes it possible to listen to a specific
-#      subnet accessible through that interface.
-#
-#      The format of the value for that property is any string accepted
-#      by java.net.InetAddress.getByName(String).
-#
-
-# ################ Filter for ObjectInputStream #############################
-# com.sun.management.jmxremote.serial.filter.pattern=<filter-string>
-#   A filter, if configured, is used by java.io.ObjectInputStream during
-#   deserialization of parameters sent to the JMX default agent to validate the
-#   contents of the stream.
-#   A filter is configured as a sequence of patterns, each pattern is either
-#   matched against the name of a class in the stream or defines a limit.
-#   Patterns are separated by ";" (semicolon).
-#   Whitespace is significant and is considered part of the pattern.
-#
-#   If a pattern includes a "=", it sets a limit.
-#   If a limit appears more than once the last value is used.
-#   Limits are checked before classes regardless of the order in the sequence of patterns.
-#   If any of the limits are exceeded, the filter status is REJECTED.
-#
-#       maxdepth=value - the maximum depth of a graph
-#       maxrefs=value  - the maximum number of internal references
-#       maxbytes=value - the maximum number of bytes in the input stream
-#       maxarray=value - the maximum array length allowed
-#
-#   Other patterns, from left to right, match the class or package name as
-#   returned from Class.getName.
-#   If the class is an array type, the class or package to be matched is the element type.
-#   Arrays of any number of dimensions are treated the same as the element type.
-#   For example, a pattern of "!example.Foo", rejects creation of any instance or
-#   array of example.Foo.
-#
-#   If the pattern starts with "!", the status is REJECTED if the remaining pattern
-#       is matched; otherwise the status is ALLOWED if the pattern matches.
-#   If the pattern contains "/", the non-empty prefix up to the "/" is the module name;
-#       if the module name matches the module name of the class then
-#       the remaining pattern is matched with the class name.
-#   If there is no "/", the module name is not compared.
-#   If the pattern ends with ".**" it matches any class in the package and all subpackages.
-#   If the pattern ends with ".*" it matches any class in the package.
-#   If the pattern ends with "*", it matches any class with the pattern as a prefix.
-#   If the pattern is equal to the class name, it matches.
-#   Otherwise, the status is UNDECIDED.
-#
-#   Ending with !* ensures we reject classes which are otherwise unmatched.
-com.sun.management.jmxremote.serial.filter.pattern=\
-java.lang.*;\
-java.lang.reflect.Proxy;\
-java.math.BigInteger;\
-java.math.BigDecimal;\
-java.util.*;\
-javax.management.*;\
-javax.management.modelmbean.*;\
-javax.management.monitor.*;\
-javax.management.openmbean.*;\
-javax.management.relation.*;\
-javax.management.remote.*;\
-javax.management.remote.rmi.*;\
-javax.management.timer.*;\
-javax.rmi.ssl.*;\
-java.rmi.MarshalledObject;\
-java.rmi.dgc.*;\
-java.rmi.server.*;\
-javax.security.auth.Subject;\
-!*
-
+#####################################################################
+#	Default Configuration File for Java Platform Management
+#####################################################################
+#
+# The Management Configuration file (in java.util.Properties format)
+# will be read if one of the following system properties is set:
+#    -Dcom.sun.management.jmxremote.port=<port-number>
+# or -Dcom.sun.management.config.file=<this-file>
+#
+# The default Management Configuration file is:
+#
+#       $JRE/conf/management/management.properties
+#
+# Another location for the Management Configuration File can be specified
+# by the following property on the Java command line:
+#
+#    -Dcom.sun.management.config.file=<this-file>
+#
+# If -Dcom.sun.management.config.file=<this-file> is set, the port
+# number for the management agent can be specified in the config file
+# using the following lines:
+#
+# ################ Management Agent Port #########################
+#
+# For setting the JMX RMI agent port use the following line
+# com.sun.management.jmxremote.port=<port-number>
+#
+# For setting the JMX local server port use the following line
+# com.sun.management.jmxremote.local.port=<port-number>
+
+#####################################################################
+#                   Optional Instrumentation
+#####################################################################
+#
+# By default only the basic instrumentation with low overhead is on.
+# The following properties allow to selectively turn on optional
+# instrumentation which are off by default and may have some
+# additional overhead.
+#
+# com.sun.management.enableThreadContentionMonitoring
+#
+#      This option enables thread contention monitoring if the
+#      Java virtual machine supports such instrumentation.
+#      Refer to the specification for the java.lang.management.ThreadMXBean
+#      interface - see isThreadContentionMonitoringSupported() method.
+#
+
+# To enable thread contention monitoring, uncomment the following line
+# com.sun.management.enableThreadContentionMonitoring
+
+#####################################################################
+#			RMI Management Properties
+#####################################################################
+#
+# If system property -Dcom.sun.management.jmxremote.port=<port-number>
+# is set then
+#     - A MBean server is started
+#     - JRE Platform MBeans are registered in the MBean server
+#     - RMI connector is published  in a private readonly registry at
+#       specified port using a well known name, "jmxrmi"
+#     - the following properties are read for JMX remote management.
+#
+# The configuration can be specified only at startup time.
+# Later changes to above system property (e.g. via setProperty method),
+# this config file, the password file, or the access file have no effect to the
+# running MBean server, the connector, or the registry.
+#
+
+#
+# ########## RMI connector settings for local management ##########
+#
+# com.sun.management.jmxremote.local.only=true|false
+#      Default for this property is true. (Case for true/false ignored)
+#      If this property is specified as true then the local JMX RMI connector
+#      server will only accept connection requests from clients running on
+#      the host where the out-of-the-box JMX management agent is running.
+#      In order to ensure backwards compatibility this property could be
+#      set to false. However, deploying the local management agent in this
+#      way is discouraged because the local JMX RMI connector server will
+#      accept connection requests from any client either local or remote.
+#      For remote management the remote JMX RMI connector server should
+#      be used instead with authentication and SSL/TLS encryption enabled.
+#
+
+# For allowing the local management agent accept local
+# and remote connection requests use the following line
+# com.sun.management.jmxremote.local.only=false
+
+#
+# ###################### RMI SSL #############################
+#
+# com.sun.management.jmxremote.ssl=true|false
+#      Default for this property is true. (Case for true/false ignored)
+#      If this property is specified as false then SSL is not used.
+#
+
+# For RMI monitoring without SSL use the following line
+# com.sun.management.jmxremote.ssl=false
+
+# com.sun.management.jmxremote.ssl.config.file=filepath
+#      Specifies the location of the SSL configuration file. A properties
+#      file can be used to supply the keystore and truststore location and
+#      password settings thus avoiding to pass them as cleartext in the
+#      command-line.
+#
+#      The current implementation of the out-of-the-box management agent will
+#      look up and use the properties specified below to configure the SSL
+#      keystore and truststore, if present:
+#          javax.net.ssl.keyStore=<keystore-location>
+#          javax.net.ssl.keyStorePassword=<keystore-password>
+#          javax.net.ssl.trustStore=<truststore-location>
+#          javax.net.ssl.trustStorePassword=<truststore-password>
+#      Any other properties in the file will be ignored. This will allow us
+#      to extend the property set in the future if required by the default
+#      SSL implementation.
+#
+#      If the property "com.sun.management.jmxremote.ssl" is set to false,
+#      then this property is ignored.
+#
+
+# For supplying the keystore settings in a file use the following line
+# com.sun.management.jmxremote.ssl.config.file=filepath
+
+# com.sun.management.jmxremote.ssl.enabled.cipher.suites=<cipher-suites>
+#      The value of this property is a string that is a comma-separated list
+#      of SSL/TLS cipher suites to enable. This property can be specified in
+#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
+#      in order to control which particular SSL/TLS cipher suites are enabled
+#      for use by accepted connections. If this property is not specified then
+#      the SSL/TLS RMI Server Socket Factory uses the SSL/TLS cipher suites that
+#      are enabled by default.
+#
+
+# com.sun.management.jmxremote.ssl.enabled.protocols=<protocol-versions>
+#      The value of this property is a string that is a comma-separated list
+#      of SSL/TLS protocol versions to enable. This property can be specified in
+#      conjunction with the previous property "com.sun.management.jmxremote.ssl"
+#      in order to control which particular SSL/TLS protocol versions are
+#      enabled for use by accepted connections. If this property is not
+#      specified then the SSL/TLS RMI Server Socket Factory uses the SSL/TLS
+#      protocol versions that are enabled by default.
+#
+
+# com.sun.management.jmxremote.ssl.need.client.auth=true|false
+#      Default for this property is false. (Case for true/false ignored)
+#      If this property is specified as true in conjunction with the previous
+#      property "com.sun.management.jmxremote.ssl" then the SSL/TLS RMI Server
+#      Socket Factory will require client authentication.
+#
+
+# For RMI monitoring with SSL client authentication use the following line
+# com.sun.management.jmxremote.ssl.need.client.auth=true
+
+# com.sun.management.jmxremote.registry.ssl=true|false
+#      Default for this property is false. (Case for true/false ignored)
+#      If this property is specified as true then the RMI registry used
+#      to bind the RMIServer remote object is protected with SSL/TLS
+#      RMI Socket Factories that can be configured with the properties:
+#          com.sun.management.jmxremote.ssl.config.file
+#          com.sun.management.jmxremote.ssl.enabled.cipher.suites
+#          com.sun.management.jmxremote.ssl.enabled.protocols
+#          com.sun.management.jmxremote.ssl.need.client.auth
+#      If the two properties below are true at the same time, i.e.
+#          com.sun.management.jmxremote.ssl=true
+#          com.sun.management.jmxremote.registry.ssl=true
+#      then the RMIServer remote object and the RMI registry are
+#      both exported with the same SSL/TLS RMI Socket Factories.
+#
+
+# For using an SSL/TLS protected RMI registry use the following line
+# com.sun.management.jmxremote.registry.ssl=true
+
+#
+# ################ RMI User authentication ################
+#
+# com.sun.management.jmxremote.authenticate=true|false
+#      Default for this property is true. (Case for true/false ignored)
+#      If this property is specified as false then no authentication is
+#      performed and all users are allowed all access.
+#
+
+# For RMI monitoring without any checking use the following line
+# com.sun.management.jmxremote.authenticate=false
+
+#
+# ################ RMI Login configuration ###################
+#
+# com.sun.management.jmxremote.login.config=<config-name>
+#      Specifies the name of a JAAS login configuration entry to use when
+#      authenticating users of RMI monitoring.
+#
+#      Setting this property is optional - the default login configuration
+#      specifies a file-based authentication that uses the password file.
+#
+#      When using this property to override the default login configuration
+#      then the named configuration entry must be in a file that gets loaded
+#      by JAAS. In addition, the login module(s) specified in the configuration
+#      should use the name and/or password callbacks to acquire the user's
+#      credentials. See the NameCallback and PasswordCallback classes in the
+#      javax.security.auth.callback package for more details.
+#
+#      If the property "com.sun.management.jmxremote.authenticate" is set to
+#      false, then this property and the password & access files are ignored.
+#
+
+# For a non-default login configuration use the following line
+# com.sun.management.jmxremote.login.config=<config-name>
+
+#
+# ################ RMI Password file location ##################
+#
+# com.sun.management.jmxremote.password.file=filepath
+#      Specifies location for password file
+#      This is optional - default location is
+#      $JRE/conf/management/jmxremote.password
+#
+#      If the property "com.sun.management.jmxremote.authenticate" is set to
+#      false, then this property and the password & access files are ignored.
+#      Otherwise the password file must exist and be in the valid format.
+#      If the password file is empty or non-existent then no access is allowed.
+#
+
+# For a non-default password file location use the following line
+# com.sun.management.jmxremote.password.file=filepath
+
+#
+# ################# Hash passwords in password file ##############
+# com.sun.management.jmxremote.password.toHashes = true|false
+#      Default for this property is true.
+#      Specifies if passwords in the password file should be hashed or not.
+#      If this property is true, and if the password file is writable, and if the
+#      system security policy allows writing into the password file,
+#      all the clear passwords in the password file will be replaced by
+#      their SHA3-512 hash when the file is read by the server
+#
+
+#
+# ################ RMI Access file location #####################
+#
+# com.sun.management.jmxremote.access.file=filepath
+#      Specifies location for access  file
+#      This is optional - default location is
+#      $JRE/conf/management/jmxremote.access
+#
+#      If the property "com.sun.management.jmxremote.authenticate" is set to
+#      false, then this property and the password & access files are ignored.
+#      Otherwise, the access file must exist and be in the valid format.
+#      If the access file is empty or non-existent then no access is allowed.
+#
+
+# For a non-default password file location use the following line
+# com.sun.management.jmxremote.access.file=filepath
+#
+
+# ################ Management agent listen interface #########################
+#
+# com.sun.management.jmxremote.host=<host-or-interface-name>
+#      Specifies the local interface on which the JMX RMI agent will bind.
+#      This is useful when running on machines which have several
+#      interfaces defined. It makes it possible to listen to a specific
+#      subnet accessible through that interface.
+#
+#      The format of the value for that property is any string accepted
+#      by java.net.InetAddress.getByName(String).
+#
+
+# ################ Filter for ObjectInputStream #############################
+# com.sun.management.jmxremote.serial.filter.pattern=<filter-string>
+#   A filter, if configured, is used by java.io.ObjectInputStream during
+#   deserialization of parameters sent to the JMX default agent to validate the
+#   contents of the stream.
+#   A filter is configured as a sequence of patterns, each pattern is either
+#   matched against the name of a class in the stream or defines a limit.
+#   Patterns are separated by ";" (semicolon).
+#   Whitespace is significant and is considered part of the pattern.
+#
+#   If a pattern includes a "=", it sets a limit.
+#   If a limit appears more than once the last value is used.
+#   Limits are checked before classes regardless of the order in the sequence of patterns.
+#   If any of the limits are exceeded, the filter status is REJECTED.
+#
+#       maxdepth=value - the maximum depth of a graph
+#       maxrefs=value  - the maximum number of internal references
+#       maxbytes=value - the maximum number of bytes in the input stream
+#       maxarray=value - the maximum array length allowed
+#
+#   Other patterns, from left to right, match the class or package name as
+#   returned from Class.getName.
+#   If the class is an array type, the class or package to be matched is the element type.
+#   Arrays of any number of dimensions are treated the same as the element type.
+#   For example, a pattern of "!example.Foo", rejects creation of any instance or
+#   array of example.Foo.
+#
+#   If the pattern starts with "!", the status is REJECTED if the remaining pattern
+#       is matched; otherwise the status is ALLOWED if the pattern matches.
+#   If the pattern contains "/", the non-empty prefix up to the "/" is the module name;
+#       if the module name matches the module name of the class then
+#       the remaining pattern is matched with the class name.
+#   If there is no "/", the module name is not compared.
+#   If the pattern ends with ".**" it matches any class in the package and all subpackages.
+#   If the pattern ends with ".*" it matches any class in the package.
+#   If the pattern ends with "*", it matches any class with the pattern as a prefix.
+#   If the pattern is equal to the class name, it matches.
+#   Otherwise, the status is UNDECIDED.
+#
+#   Ending with !* ensures we reject classes which are otherwise unmatched.
+com.sun.management.jmxremote.serial.filter.pattern=\
+java.lang.*;\
+java.lang.reflect.Proxy;\
+java.math.BigInteger;\
+java.math.BigDecimal;\
+java.util.*;\
+javax.management.*;\
+javax.management.modelmbean.*;\
+javax.management.monitor.*;\
+javax.management.openmbean.*;\
+javax.management.relation.*;\
+javax.management.remote.*;\
+javax.management.remote.rmi.*;\
+javax.management.timer.*;\
+javax.rmi.ssl.*;\
+java.rmi.MarshalledObject;\
+java.rmi.dgc.*;\
+java.rmi.server.*;\
+javax.security.auth.Subject;\
+!*
+