quarchpy 2.2.9.dev4__py2.py3-none-any.whl → 2.2.9.dev5__py2.py3-none-any.whl

quarchpy/connection_specific/jdk_j21_jres/mac_amd64_jdk_21_jre/conf/net.properties

@@ -1,164 +1,164 @@
-############################################################
-#       Default Networking Configuration File
-#
-# This file may contain default values for the networking system properties.
-# These values are only used when the system properties are not specified
-# on the command line or set programmatically.
-# For now, only the various proxy settings can be configured here.
-############################################################
-
-# Whether or not the DefaultProxySelector will default to System Proxy
-# settings when they do exist.
-# Set it to 'true' to enable this feature and check for platform
-# specific proxy settings
-# Note that the system properties that do explicitly set proxies
-# (like http.proxyHost) do take precedence over the system settings
-# even if java.net.useSystemProxies is set to true.
-
-java.net.useSystemProxies=false
-
-#------------------------------------------------------------------------
-# Proxy configuration for the various protocol handlers.
-# DO NOT uncomment these lines if you have set java.net.useSystemProxies
-# to true as the protocol specific properties will take precedence over
-# system settings.
-#------------------------------------------------------------------------
-
-# HTTP Proxy settings. proxyHost is the name of the proxy server
-# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
-# value is 80) and nonProxyHosts is a '|' separated list of hostnames which
-# should be accessed directly, ignoring the proxy server (default value is
-# localhost & 127.0.0.1).
-#
-# http.proxyHost=
-# http.proxyPort=80
-http.nonProxyHosts=localhost|127.*|[::1]
-#
-# HTTPS Proxy Settings. proxyHost is the name of the proxy server
-# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
-# value is 443). The HTTPS protocol handlers uses the http nonProxyHosts list.
-#
-# https.proxyHost=
-# https.proxyPort=443
-#
-# FTP Proxy settings. proxyHost is the name of the proxy server
-# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
-# value is 80) and nonProxyHosts is a '|' separated list of hostnames which
-# should be accessed directly, ignoring the proxy server (default value is
-# localhost & 127.0.0.1).
-#
-# ftp.proxyHost=
-# ftp.proxyPort=80
-ftp.nonProxyHosts=localhost|127.*|[::1]
-#
-# Socks proxy settings. socksProxyHost is the name of the proxy server
-# (e.g. socks.domain.com), socksProxyPort is the port number to use
-# (default value is 1080)
-#
-# socksProxyHost=
-# socksProxyPort=1080
-#
-# HTTP Keep Alive settings. remainingData is the maximum amount of data
-# in kilobytes that will be cleaned off the underlying socket so that it
-# can be reused (default value is 512K), queuedConnections is the maximum
-# number of Keep Alive connections to be on the queue for clean up (default
-# value is 10).
-# http.KeepAlive.remainingData=512
-# http.KeepAlive.queuedConnections=10
-
-# Authentication Scheme restrictions for HTTP and HTTPS.
-#
-# In some environments certain authentication schemes may be undesirable
-# when proxying HTTP or HTTPS.  For example, "Basic" results in effectively the
-# cleartext transmission of the user's password over the physical network.
-# This section describes the mechanism for disabling authentication schemes
-# based on the scheme name. Disabled schemes will be treated as if they are not
-# supported by the implementation.
-#
-# The 'jdk.http.auth.tunneling.disabledSchemes' property lists the authentication
-# schemes that will be disabled when tunneling HTTPS over a proxy, HTTP CONNECT.
-# The 'jdk.http.auth.proxying.disabledSchemes' property lists the authentication
-# schemes that will be disabled when proxying HTTP.
-#
-# In both cases the property is a comma-separated list of, case-insensitive,
-# authentication scheme names, as defined by their relevant RFCs. An
-# implementation may, but is not required to, support common schemes whose names
-# include: 'Basic', 'Digest', 'NTLM', 'Kerberos', 'Negotiate'.  A scheme that
-# is not known, or not supported, by the implementation is ignored.
-#
-# Note: This property is currently used by the JDK Reference implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-#jdk.http.auth.proxying.disabledSchemes=
-jdk.http.auth.tunneling.disabledSchemes=Basic
-
-#
-# Allow restricted HTTP request headers
-#
-# By default, the following request headers are not allowed to be set by user code
-# in HttpRequests: "connection", "content-length", "expect", "host" and "upgrade".
-# The 'jdk.httpclient.allowRestrictedHeaders' property allows one or more of these
-# headers to be specified as a comma separated list to override the default restriction.
-# The names are case-insensitive and white-space is ignored (removed before processing
-# the list). Note, this capability is mostly intended for testing and isn't expected
-# to be used in real deployments. Protocol errors or other undefined behavior is likely
-# to occur when using them. The property is not set by default.
-# Note also, that there may be other headers that are restricted from being set
-# depending on the context. This includes the "Authorization" header when the
-# relevant HttpClient has an authenticator set. These restrictions cannot be
-# overridden by this property.
-#
-# jdk.httpclient.allowRestrictedHeaders=host
-#
-#
-# Transparent NTLM HTTP authentication mode on Windows. Transparent authentication
-# can be used for the NTLM scheme, where the security credentials based on the
-# currently logged in user's name and password can be obtained directly from the
-# operating system, without prompting the user. This property has three possible
-# values which regulate the behavior as shown below. Other unrecognized values
-# are handled the same as 'disabled'. Note, that NTLM is not considered to be a
-# strongly secure authentication scheme and care should be taken before enabling
-# this mechanism.
-#
-# Transparent authentication never used.
-#jdk.http.ntlm.transparentAuth=disabled
-#
-# Enabled for all hosts.
-#jdk.http.ntlm.transparentAuth=allHosts
-#
-# Enabled for hosts that are trusted in Windows Internet settings
-#jdk.http.ntlm.transparentAuth=trustedHosts
-#
-jdk.http.ntlm.transparentAuth=disabled
-
-#
-# Maximum HTTP field section size that a client is prepared to accept
-#
-# jdk.http.maxHeaderSize=393216
-#
-# This is the maximum header field section size that a client is prepared to accept.
-# This is computed as the sum of the size of the uncompressed header name, plus
-# the size of the uncompressed header value, plus an overhead of 32 bytes for
-# each field section line. If a peer sends a field section that exceeds this
-# size a {@link java.net.ProtocolException ProtocolException} will be raised.
-# This applies to all versions of the HTTP protocol. A value of zero or a negative
-# value means no limit. If left unspecified, the default value is 393216 bytes
-# or 384kB.
-#
-# Note: This property is currently used by the JDK Reference implementation. It
-# is not guaranteed to be examined and used by other implementations.
-#
-# Default directory where automatically bound Unix domain server
-# sockets are stored. Sockets are automatically bound when bound
-# with a null address.
-#
-# On Unix the search order to determine this directory is:
-#
-# 1. System property jdk.net.unixdomain.tmpdir
-#
-# 2. Networking property jdk.net.unixdomain.tmpdir specified
-#    in this file (effective default)
-#
-# 3. System property java.io.tmpdir
-#
-jdk.net.unixdomain.tmpdir=/tmp
+############################################################
+#       Default Networking Configuration File
+#
+# This file may contain default values for the networking system properties.
+# These values are only used when the system properties are not specified
+# on the command line or set programmatically.
+# For now, only the various proxy settings can be configured here.
+############################################################
+
+# Whether or not the DefaultProxySelector will default to System Proxy
+# settings when they do exist.
+# Set it to 'true' to enable this feature and check for platform
+# specific proxy settings
+# Note that the system properties that do explicitly set proxies
+# (like http.proxyHost) do take precedence over the system settings
+# even if java.net.useSystemProxies is set to true.
+
+java.net.useSystemProxies=false
+
+#------------------------------------------------------------------------
+# Proxy configuration for the various protocol handlers.
+# DO NOT uncomment these lines if you have set java.net.useSystemProxies
+# to true as the protocol specific properties will take precedence over
+# system settings.
+#------------------------------------------------------------------------
+
+# HTTP Proxy settings. proxyHost is the name of the proxy server
+# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
+# value is 80) and nonProxyHosts is a '|' separated list of hostnames which
+# should be accessed directly, ignoring the proxy server (default value is
+# localhost & 127.0.0.1).
+#
+# http.proxyHost=
+# http.proxyPort=80
+http.nonProxyHosts=localhost|127.*|[::1]
+#
+# HTTPS Proxy Settings. proxyHost is the name of the proxy server
+# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
+# value is 443). The HTTPS protocol handlers uses the http nonProxyHosts list.
+#
+# https.proxyHost=
+# https.proxyPort=443
+#
+# FTP Proxy settings. proxyHost is the name of the proxy server
+# (e.g. proxy.mydomain.com), proxyPort is the port number to use (default
+# value is 80) and nonProxyHosts is a '|' separated list of hostnames which
+# should be accessed directly, ignoring the proxy server (default value is
+# localhost & 127.0.0.1).
+#
+# ftp.proxyHost=
+# ftp.proxyPort=80
+ftp.nonProxyHosts=localhost|127.*|[::1]
+#
+# Socks proxy settings. socksProxyHost is the name of the proxy server
+# (e.g. socks.domain.com), socksProxyPort is the port number to use
+# (default value is 1080)
+#
+# socksProxyHost=
+# socksProxyPort=1080
+#
+# HTTP Keep Alive settings. remainingData is the maximum amount of data
+# in kilobytes that will be cleaned off the underlying socket so that it
+# can be reused (default value is 512K), queuedConnections is the maximum
+# number of Keep Alive connections to be on the queue for clean up (default
+# value is 10).
+# http.KeepAlive.remainingData=512
+# http.KeepAlive.queuedConnections=10
+
+# Authentication Scheme restrictions for HTTP and HTTPS.
+#
+# In some environments certain authentication schemes may be undesirable
+# when proxying HTTP or HTTPS.  For example, "Basic" results in effectively the
+# cleartext transmission of the user's password over the physical network.
+# This section describes the mechanism for disabling authentication schemes
+# based on the scheme name. Disabled schemes will be treated as if they are not
+# supported by the implementation.
+#
+# The 'jdk.http.auth.tunneling.disabledSchemes' property lists the authentication
+# schemes that will be disabled when tunneling HTTPS over a proxy, HTTP CONNECT.
+# The 'jdk.http.auth.proxying.disabledSchemes' property lists the authentication
+# schemes that will be disabled when proxying HTTP.
+#
+# In both cases the property is a comma-separated list of, case-insensitive,
+# authentication scheme names, as defined by their relevant RFCs. An
+# implementation may, but is not required to, support common schemes whose names
+# include: 'Basic', 'Digest', 'NTLM', 'Kerberos', 'Negotiate'.  A scheme that
+# is not known, or not supported, by the implementation is ignored.
+#
+# Note: This property is currently used by the JDK Reference implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+#jdk.http.auth.proxying.disabledSchemes=
+jdk.http.auth.tunneling.disabledSchemes=Basic
+
+#
+# Allow restricted HTTP request headers
+#
+# By default, the following request headers are not allowed to be set by user code
+# in HttpRequests: "connection", "content-length", "expect", "host" and "upgrade".
+# The 'jdk.httpclient.allowRestrictedHeaders' property allows one or more of these
+# headers to be specified as a comma separated list to override the default restriction.
+# The names are case-insensitive and white-space is ignored (removed before processing
+# the list). Note, this capability is mostly intended for testing and isn't expected
+# to be used in real deployments. Protocol errors or other undefined behavior is likely
+# to occur when using them. The property is not set by default.
+# Note also, that there may be other headers that are restricted from being set
+# depending on the context. This includes the "Authorization" header when the
+# relevant HttpClient has an authenticator set. These restrictions cannot be
+# overridden by this property.
+#
+# jdk.httpclient.allowRestrictedHeaders=host
+#
+#
+# Transparent NTLM HTTP authentication mode on Windows. Transparent authentication
+# can be used for the NTLM scheme, where the security credentials based on the
+# currently logged in user's name and password can be obtained directly from the
+# operating system, without prompting the user. This property has three possible
+# values which regulate the behavior as shown below. Other unrecognized values
+# are handled the same as 'disabled'. Note, that NTLM is not considered to be a
+# strongly secure authentication scheme and care should be taken before enabling
+# this mechanism.
+#
+# Transparent authentication never used.
+#jdk.http.ntlm.transparentAuth=disabled
+#
+# Enabled for all hosts.
+#jdk.http.ntlm.transparentAuth=allHosts
+#
+# Enabled for hosts that are trusted in Windows Internet settings
+#jdk.http.ntlm.transparentAuth=trustedHosts
+#
+jdk.http.ntlm.transparentAuth=disabled
+
+#
+# Maximum HTTP field section size that a client is prepared to accept
+#
+# jdk.http.maxHeaderSize=393216
+#
+# This is the maximum header field section size that a client is prepared to accept.
+# This is computed as the sum of the size of the uncompressed header name, plus
+# the size of the uncompressed header value, plus an overhead of 32 bytes for
+# each field section line. If a peer sends a field section that exceeds this
+# size a {@link java.net.ProtocolException ProtocolException} will be raised.
+# This applies to all versions of the HTTP protocol. A value of zero or a negative
+# value means no limit. If left unspecified, the default value is 393216 bytes
+# or 384kB.
+#
+# Note: This property is currently used by the JDK Reference implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Default directory where automatically bound Unix domain server
+# sockets are stored. Sockets are automatically bound when bound
+# with a null address.
+#
+# On Unix the search order to determine this directory is:
+#
+# 1. System property jdk.net.unixdomain.tmpdir
+#
+# 2. Networking property jdk.net.unixdomain.tmpdir specified
+#    in this file (effective default)
+#
+# 3. System property java.io.tmpdir
+#
+jdk.net.unixdomain.tmpdir=/tmp

quarchpy/connection_specific/jdk_j21_jres/mac_amd64_jdk_21_jre/conf/security/java.policy

@@ -1,46 +1,46 @@
-//
-// This system policy file grants a set of default permissions to all domains
-// and can be configured to grant additional permissions to modules and other
-// code sources. The code source URL scheme for modules linked into a
-// run-time image is "jrt".
-//
-// For example, to grant permission to read the "foo" property to the module
-// "com.greetings", the grant entry is:
-//
-// grant codeBase "jrt:/com.greetings" {
-//     permission java.util.PropertyPermission "foo", "read";
-// };
-//
-
-// default permissions granted to all domains
-grant {
-    // allows anyone to listen on dynamic ports
-    permission java.net.SocketPermission "localhost:0", "listen";
-
-    // "standard" properties that can be read by anyone
-    permission java.util.PropertyPermission "java.version", "read";
-    permission java.util.PropertyPermission "java.vendor", "read";
-    permission java.util.PropertyPermission "java.vendor.url", "read";
-    permission java.util.PropertyPermission "java.class.version", "read";
-    permission java.util.PropertyPermission "os.name", "read";
-    permission java.util.PropertyPermission "os.version", "read";
-    permission java.util.PropertyPermission "os.arch", "read";
-    permission java.util.PropertyPermission "file.separator", "read";
-    permission java.util.PropertyPermission "path.separator", "read";
-    permission java.util.PropertyPermission "line.separator", "read";
-    permission java.util.PropertyPermission
-                   "java.specification.version", "read";
-    permission java.util.PropertyPermission
-                   "java.specification.maintenance.version", "read";
-    permission java.util.PropertyPermission "java.specification.vendor", "read";
-    permission java.util.PropertyPermission "java.specification.name", "read";
-    permission java.util.PropertyPermission
-                   "java.vm.specification.version", "read";
-    permission java.util.PropertyPermission
-                   "java.vm.specification.vendor", "read";
-    permission java.util.PropertyPermission
-                   "java.vm.specification.name", "read";
-    permission java.util.PropertyPermission "java.vm.version", "read";
-    permission java.util.PropertyPermission "java.vm.vendor", "read";
-    permission java.util.PropertyPermission "java.vm.name", "read";
-};
+//
+// This system policy file grants a set of default permissions to all domains
+// and can be configured to grant additional permissions to modules and other
+// code sources. The code source URL scheme for modules linked into a
+// run-time image is "jrt".
+//
+// For example, to grant permission to read the "foo" property to the module
+// "com.greetings", the grant entry is:
+//
+// grant codeBase "jrt:/com.greetings" {
+//     permission java.util.PropertyPermission "foo", "read";
+// };
+//
+
+// default permissions granted to all domains
+grant {
+    // allows anyone to listen on dynamic ports
+    permission java.net.SocketPermission "localhost:0", "listen";
+
+    // "standard" properties that can be read by anyone
+    permission java.util.PropertyPermission "java.version", "read";
+    permission java.util.PropertyPermission "java.vendor", "read";
+    permission java.util.PropertyPermission "java.vendor.url", "read";
+    permission java.util.PropertyPermission "java.class.version", "read";
+    permission java.util.PropertyPermission "os.name", "read";
+    permission java.util.PropertyPermission "os.version", "read";
+    permission java.util.PropertyPermission "os.arch", "read";
+    permission java.util.PropertyPermission "file.separator", "read";
+    permission java.util.PropertyPermission "path.separator", "read";
+    permission java.util.PropertyPermission "line.separator", "read";
+    permission java.util.PropertyPermission
+                   "java.specification.version", "read";
+    permission java.util.PropertyPermission
+                   "java.specification.maintenance.version", "read";
+    permission java.util.PropertyPermission "java.specification.vendor", "read";
+    permission java.util.PropertyPermission "java.specification.name", "read";
+    permission java.util.PropertyPermission
+                   "java.vm.specification.version", "read";
+    permission java.util.PropertyPermission
+                   "java.vm.specification.vendor", "read";
+    permission java.util.PropertyPermission
+                   "java.vm.specification.name", "read";
+    permission java.util.PropertyPermission "java.vm.version", "read";
+    permission java.util.PropertyPermission "java.vm.vendor", "read";
+    permission java.util.PropertyPermission "java.vm.name", "read";
+};