qiskit 2.0.3__cp39-abi3-manylinux2014_aarch64.manylinux_2_17_aarch64.whl

qiskit/qasm3/printer.py

@@ -0,0 +1,608 @@
+# This code is part of Qiskit.
+#
+# (C) Copyright IBM 2021.
+#
+# This code is licensed under the Apache License, Version 2.0. You may
+# obtain a copy of this license in the LICENSE.txt file in the root directory
+# of this source tree or at http://www.apache.org/licenses/LICENSE-2.0.
+#
+# Any modifications or derivative works of this code must retain this
+# copyright notice, and modified files need to carry a notice indicating
+# that they have been altered from the originals.
+
+"""Printers for OpenQASM 3 AST nodes."""
+
+import collections
+import io
+from typing import Sequence
+
+from . import ast
+from .experimental import ExperimentalFeatures
+
+# Precedence and associativity table for prefix, postfix and infix operators.  The rules are a
+# lookup table of two-tuples; the "binding power" of the operator to the left and to the right.
+# Prefix operators have maximum binding power to the left, postfix have maximum power to the right
+# (i.e. they bind "so tightly" on that side that parentheses are never needed).
+#
+# Associativity is represented by having offset binding between the left and right sides.  The rule
+# is that each infix operator's power is a `(2*n - 1, 2*n)` pair so the odd number is lower then
+# the even - it's not meaningful itself, just a convention to avoid conflicts.  If the operator is
+# left-associative (conventional, `a + b + c` is parsed `(a + b) + c`), the lower number is on the
+# left, and vice-versa for right-associative operators (such as `**`).
+#
+# This hashmap is ordered from highest precedence to lowest, for convenience.  Function calls,
+# indexing and casting are all higher priority than these, so we just ignore them.
+_BindingPower = collections.namedtuple("_BindingPower", ("left", "right"), defaults=(255, 255))
+_BINDING_POWER = {
+    # Power: (24, 23)
+    #
+    ast.Unary.Op.LOGIC_NOT: _BindingPower(right=22),
+    ast.Unary.Op.BIT_NOT: _BindingPower(right=22),
+    #
+    # Modulo: (19, 20)
+    ast.Binary.Op.MUL: _BindingPower(19, 20),
+    ast.Binary.Op.DIV: _BindingPower(19, 20),
+    #
+    ast.Binary.Op.ADD: _BindingPower(17, 18),
+    ast.Binary.Op.SUB: _BindingPower(17, 18),
+    #
+    ast.Binary.Op.SHIFT_LEFT: _BindingPower(15, 16),
+    ast.Binary.Op.SHIFT_RIGHT: _BindingPower(15, 16),
+    #
+    ast.Binary.Op.LESS: _BindingPower(13, 14),
+    ast.Binary.Op.LESS_EQUAL: _BindingPower(13, 14),
+    ast.Binary.Op.GREATER: _BindingPower(13, 14),
+    ast.Binary.Op.GREATER_EQUAL: _BindingPower(13, 14),
+    #
+    ast.Binary.Op.EQUAL: _BindingPower(11, 12),
+    ast.Binary.Op.NOT_EQUAL: _BindingPower(11, 12),
+    #
+    ast.Binary.Op.BIT_AND: _BindingPower(9, 10),
+    ast.Binary.Op.BIT_XOR: _BindingPower(7, 8),
+    ast.Binary.Op.BIT_OR: _BindingPower(5, 6),
+    ast.Binary.Op.LOGIC_AND: _BindingPower(3, 4),
+    ast.Binary.Op.LOGIC_OR: _BindingPower(1, 2),
+}
+
+
+class BasicPrinter:
+    """An OpenQASM 3 AST visitor which writes the tree out in text mode to a stream, where the only
+    formatting is simple block indentation."""
+
+    _CONSTANT_LOOKUP = {
+        ast.Constant.PI: "pi",
+        ast.Constant.EULER: "euler",
+        ast.Constant.TAU: "tau",
+    }
+
+    _MODIFIER_LOOKUP = {
+        ast.QuantumGateModifierName.CTRL: "ctrl",
+        ast.QuantumGateModifierName.NEGCTRL: "negctrl",
+        ast.QuantumGateModifierName.INV: "inv",
+        ast.QuantumGateModifierName.POW: "pow",
+    }
+
+    _FLOAT_TYPE_LOOKUP = {type: f"float[{type.value}]" for type in ast.FloatType}
+
+    # The visitor names include the class names, so they mix snake_case with PascalCase.
+    # pylint: disable=invalid-name
+
+    def __init__(
+        self,
+        stream: io.TextIOBase,
+        *,
+        indent: str,
+        chain_else_if: bool = False,
+        experimental: ExperimentalFeatures = ExperimentalFeatures(0),
+    ):
+        """
+        Args:
+            stream (io.TextIOBase): the stream that the output will be written to.
+            indent (str): the string to use as a single indentation level.
+            chain_else_if (bool): If ``True``, then constructs of the form::
+
+                    if (x == 0) {
+                        // ...
+                    } else {
+                        if (x == 1) {
+                            // ...
+                        } else {
+                            // ...
+                        }
+                    }
+
+                will be collapsed into the equivalent but flatter::
+
+                    if (x == 0) {
+                        // ...
+                    } else if (x == 1) {
+                        // ...
+                    } else {
+                        // ...
+                    }
+
+                This collapsed form may have less support on backends, so it is turned off by
+                default.  While the output of this printer is always unambiguous, using ``else``
+                without immediately opening an explicit scope with ``{ }`` in nested contexts can
+                cause issues, in the general case, which is why it is sometimes less supported.
+        """
+        self.stream = stream
+        self.indent = indent
+        self._current_indent = 0
+        self._chain_else_if = chain_else_if
+        self._experimental = experimental
+
+    def visit(self, node: ast.ASTNode) -> None:
+        """Visit this node of the AST, printing it out to the stream in this class instance.
+
+        Normally, you will want to call this function on a complete :obj:`~qiskit.qasm3.ast.Program`
+        node, to print out a complete program to the stream.  The visit can start from any node,
+        however, if you want to build up a file bit-by-bit manually.
+
+        Args:
+            node (ASTNode): the node to convert to OpenQASM 3 and write out to the stream.
+
+        Raises:
+            RuntimeError: if an AST node is encountered that the visitor is unable to parse.  This
+                typically means that the given AST was malformed.
+        """
+        visitor = None
+        for cls_ in type(node).mro():
+            visitor = getattr(self, "_visit_" + cls_.__name__, None)
+            if visitor is not None:
+                break
+        else:
+            node_type = node.__class__.__name__
+            raise RuntimeError(
+                f"This visitor does not know how to handle AST nodes of type '{node_type}',"
+                f" but was given '{node}'."
+            )
+        visitor(node)
+
+    def _start_line(self) -> None:
+        self.stream.write(self._current_indent * self.indent)
+
+    def _end_statement(self) -> None:
+        self.stream.write(";\n")
+
+    def _end_line(self) -> None:
+        self.stream.write("\n")
+
+    def _write_statement(self, line: str) -> None:
+        self._start_line()
+        self.stream.write(line)
+        self._end_statement()
+
+    def _visit_sequence(
+        self, nodes: Sequence[ast.ASTNode], *, start: str = "", end: str = "", separator: str
+    ) -> None:
+        if start:
+            self.stream.write(start)
+        for node in nodes[:-1]:
+            self.visit(node)
+            self.stream.write(separator)
+        if nodes:
+            self.visit(nodes[-1])
+        if end:
+            self.stream.write(end)
+
+    def _visit_Program(self, node: ast.Program) -> None:
+        self.visit(node.header)
+        for statement in node.statements:
+            self.visit(statement)
+
+    def _visit_Header(self, node: ast.Header) -> None:
+        self.visit(node.version)
+        for include in node.includes:
+            self.visit(include)
+
+    def _visit_Version(self, node: ast.Version) -> None:
+        self._write_statement(f"OPENQASM {node.version_number}")
+
+    def _visit_Include(self, node: ast.Include) -> None:
+        self._write_statement(f'include "{node.filename}"')
+
+    def _visit_Pragma(self, node: ast.Pragma) -> None:
+        self._write_statement(f"#pragma {node.content}")
+
+    def _visit_CalibrationGrammarDeclaration(self, node: ast.CalibrationGrammarDeclaration) -> None:
+        self._write_statement(f'defcalgrammar "{node.name}"')
+
+    def _visit_FloatType(self, node: ast.FloatType) -> None:
+        self.stream.write(self._FLOAT_TYPE_LOOKUP[node])
+
+    def _visit_BoolType(self, _node: ast.BoolType) -> None:
+        self.stream.write("bool")
+
+    def _visit_DurationType(self, _node: ast.DurationType) -> None:
+        self.stream.write("duration")
+
+    def _visit_IntType(self, node: ast.IntType) -> None:
+        self.stream.write("int")
+        if node.size is not None:
+            self.stream.write(f"[{node.size}]")
+
+    def _visit_UintType(self, node: ast.UintType) -> None:
+        self.stream.write("uint")
+        if node.size is not None:
+            self.stream.write(f"[{node.size}]")
+
+    def _visit_BitType(self, _node: ast.BitType) -> None:
+        self.stream.write("bit")
+
+    def _visit_BitArrayType(self, node: ast.BitArrayType) -> None:
+        self.stream.write(f"bit[{node.size}]")
+
+    def _visit_StringifyAndPray(self, node: ast.StringifyAndPray) -> None:
+        self.stream.write(str(node.obj))
+
+    def _visit_Identifier(self, node: ast.Identifier) -> None:
+        self.stream.write(node.string)
+
+    def _visit_SubscriptedIdentifier(self, node: ast.SubscriptedIdentifier) -> None:
+        self.stream.write(node.string)
+        self.stream.write("[")
+        self.visit(node.subscript)
+        self.stream.write("]")
+
+    def _visit_Constant(self, node: ast.Constant) -> None:
+        self.stream.write(self._CONSTANT_LOOKUP[node])
+
+    def _visit_Range(self, node: ast.Range) -> None:
+        if node.start is not None:
+            self.visit(node.start)
+        self.stream.write(":")
+        if node.step is not None:
+            self.visit(node.step)
+            self.stream.write(":")
+        if node.end is not None:
+            self.visit(node.end)
+
+    def _visit_IndexSet(self, node: ast.IndexSet) -> None:
+        self._visit_sequence(node.values, start="{", separator=", ", end="}")
+
+    def _visit_QuantumMeasurement(self, node: ast.QuantumMeasurement) -> None:
+        self.stream.write("measure ")
+        self._visit_sequence(node.identifierList, separator=", ")
+
+    def _visit_QuantumMeasurementAssignment(self, node: ast.QuantumMeasurementAssignment) -> None:
+        self._start_line()
+        self.visit(node.identifier)
+        self.stream.write(" = ")
+        self.visit(node.quantumMeasurement)
+        self._end_statement()
+
+    def _visit_QuantumReset(self, node: ast.QuantumReset) -> None:
+        self._start_line()
+        self.stream.write("reset ")
+        self.visit(node.identifier)
+        self._end_statement()
+
+    def _visit_QuantumDelay(self, node: ast.QuantumDelay) -> None:
+        self._start_line()
+        self.stream.write("delay[")
+        self.visit(node.duration)
+        self.stream.write("] ")
+        self._visit_sequence(node.qubits, separator=", ")
+        self._end_statement()
+
+    def _visit_IntegerLiteral(self, node: ast.IntegerLiteral) -> None:
+        self.stream.write(str(node.value))
+
+    def _visit_FloatLiteral(self, node: ast.FloatLiteral) -> None:
+        self.stream.write(str(node.value))
+
+    def _visit_BooleanLiteral(self, node: ast.BooleanLiteral):
+        self.stream.write("true" if node.value else "false")
+
+    def _visit_BitstringLiteral(self, node: ast.BitstringLiteral):
+        self.stream.write(f'"{node.value:0{node.width}b}"')
+
+    def _visit_DurationLiteral(self, node: ast.DurationLiteral) -> None:
+        self.stream.write(f"{node.value}{node.unit.value}")
+
+    def _visit_Designator(self, node: ast.Designator) -> None:
+        self.stream.write("[")
+        self.visit(node.expression)
+        self.stream.write("]")
+
+    def _visit_Unary(self, node: ast.Unary):
+        self.stream.write(node.op.value)
+        if (
+            isinstance(node.operand, (ast.Unary, ast.Binary))
+            and _BINDING_POWER[node.operand.op].left < _BINDING_POWER[node.op].right
+        ):
+            self.stream.write("(")
+            self.visit(node.operand)
+            self.stream.write(")")
+        else:
+            self.visit(node.operand)
+
+    def _visit_Binary(self, node: ast.Binary):
+        if (
+            isinstance(node.left, (ast.Unary, ast.Binary))
+            and _BINDING_POWER[node.left.op].right < _BINDING_POWER[node.op].left
+        ):
+            self.stream.write("(")
+            self.visit(node.left)
+            self.stream.write(")")
+        else:
+            self.visit(node.left)
+        self.stream.write(f" {node.op.value} ")
+        if (
+            isinstance(node.right, (ast.Unary, ast.Binary))
+            and _BINDING_POWER[node.right.op].left < _BINDING_POWER[node.op].right
+        ):
+            self.stream.write("(")
+            self.visit(node.right)
+            self.stream.write(")")
+        else:
+            self.visit(node.right)
+
+    def _visit_Cast(self, node: ast.Cast):
+        self.visit(node.type)
+        self.stream.write("(")
+        self.visit(node.operand)
+        self.stream.write(")")
+
+    def _visit_Index(self, node: ast.Index):
+        if isinstance(node.target, (ast.Unary, ast.Binary)):
+            self.stream.write("(")
+            self.visit(node.target)
+            self.stream.write(")")
+        else:
+            self.visit(node.target)
+        self.stream.write("[")
+        self.visit(node.index)
+        self.stream.write("]")
+
+    def _visit_ClassicalDeclaration(self, node: ast.ClassicalDeclaration) -> None:
+        self._start_line()
+        self.visit(node.type)
+        self.stream.write(" ")
+        self.visit(node.identifier)
+        if node.initializer is not None:
+            self.stream.write(" = ")
+            self.visit(node.initializer)
+        self._end_statement()
+
+    def _visit_StretchDeclaration(self, node: ast.StretchDeclaration) -> None:
+        self._start_line()
+        self.stream.write("stretch")
+        self.stream.write(" ")
+        self.visit(node.identifier)
+        if node.bound is not None:
+            self.stream.write(" = ")
+            self.visit(node.bound)
+        self._end_statement()
+
+    def _visit_AssignmentStatement(self, node: ast.AssignmentStatement) -> None:
+        self._start_line()
+        self.visit(node.lvalue)
+        self.stream.write(" = ")
+        self.visit(node.rvalue)
+        self._end_statement()
+
+    def _visit_IODeclaration(self, node: ast.IODeclaration) -> None:
+        self._start_line()
+        modifier = "input" if node.modifier is ast.IOModifier.INPUT else "output"
+        self.stream.write(modifier + " ")
+        self.visit(node.type)
+        self.stream.write(" ")
+        self.visit(node.identifier)
+        self._end_statement()
+
+    def _visit_QuantumDeclaration(self, node: ast.QuantumDeclaration) -> None:
+        self._start_line()
+        self.stream.write("qubit")
+        if node.designator is not None:
+            self.visit(node.designator)
+        self.stream.write(" ")
+        self.visit(node.identifier)
+        self._end_statement()
+
+    def _visit_AliasStatement(self, node: ast.AliasStatement) -> None:
+        self._start_line()
+        self.stream.write("let ")
+        self.visit(node.identifier)
+        self.stream.write(" = ")
+        self.visit(node.value)
+        self._end_statement()
+
+    def _visit_QuantumGateModifier(self, node: ast.QuantumGateModifier) -> None:
+        self.stream.write(self._MODIFIER_LOOKUP[node.modifier])
+        if node.argument:
+            self.stream.write("(")
+            self.visit(node.argument)
+            self.stream.write(")")
+
+    def _visit_QuantumGateCall(self, node: ast.QuantumGateCall) -> None:
+        self._start_line()
+        if node.modifiers:
+            self._visit_sequence(node.modifiers, end=" @ ", separator=" @ ")
+        self.visit(node.quantumGateName)
+        if node.parameters:
+            self._visit_sequence(node.parameters, start="(", end=")", separator=", ")
+        self.stream.write(" ")
+        self._visit_sequence(node.indexIdentifierList, separator=", ")
+        self._end_statement()
+
+    def _visit_QuantumBarrier(self, node: ast.QuantumBarrier) -> None:
+        self._start_line()
+        self.stream.write("barrier ")
+        self._visit_sequence(node.indexIdentifierList, separator=", ")
+        self._end_statement()
+
+    def _visit_ProgramBlock(self, node: ast.ProgramBlock) -> None:
+        self.stream.write("{\n")
+        self._current_indent += 1
+        for statement in node.statements:
+            self.visit(statement)
+        self._current_indent -= 1
+        self._start_line()
+        self.stream.write("}")
+
+    def _visit_ReturnStatement(self, node: ast.ReturnStatement) -> None:
+        self._start_line()
+        if node.expression:
+            self.stream.write("return ")
+            self.visit(node.expression)
+        else:
+            self.stream.write("return")
+        self._end_statement()
+
+    def _visit_QuantumGateDefinition(self, node: ast.QuantumGateDefinition) -> None:
+        self._start_line()
+        self.stream.write("gate ")
+        self.visit(node.name)
+        if node.params:
+            self._visit_sequence(node.params, start="(", end=")", separator=", ")
+        self.stream.write(" ")
+        if node.qubits:
+            self._visit_sequence(node.qubits, separator=", ")
+            self.stream.write(" ")
+        self.visit(node.body)
+        self._end_line()
+
+    def _visit_CalibrationDefinition(self, node: ast.CalibrationDefinition) -> None:
+        self._start_line()
+        self.stream.write("defcal ")
+        self.visit(node.name)
+        self.stream.write(" ")
+        if node.calibrationArgumentList:
+            self._visit_sequence(node.calibrationArgumentList, start="(", end=")", separator=", ")
+            self.stream.write(" ")
+        self._visit_sequence(node.identifierList, separator=", ")
+        # This is temporary: calibration definition blocks are not currently (2021-10-04) defined
+        # properly.
+        self.stream.write(" {}")
+        self._end_line()
+
+    def _visit_BreakStatement(self, _node: ast.BreakStatement) -> None:
+        self._write_statement("break")
+
+    def _visit_ContinueStatement(self, _node: ast.ContinueStatement) -> None:
+        self._write_statement("continue")
+
+    def _visit_BranchingStatement(
+        self, node: ast.BranchingStatement, chained: bool = False
+    ) -> None:
+        if not chained:
+            self._start_line()
+        self.stream.write("if (")
+        self.visit(node.condition)
+        self.stream.write(") ")
+        self.visit(node.true_body)
+        if node.false_body is not None:
+            self.stream.write(" else ")
+            # Special handling to flatten a perfectly nested structure of
+            #   if {...} else { if {...} else {...} }
+            # into the simpler
+            #   if {...} else if {...} else {...}
+            # but only if we're allowed to by our options.
+            if (
+                self._chain_else_if
+                and len(node.false_body.statements) == 1
+                and isinstance(node.false_body.statements[0], ast.BranchingStatement)
+            ):
+                self._visit_BranchingStatement(node.false_body.statements[0], chained=True)
+            else:
+                self.visit(node.false_body)
+        if not chained:
+            # The visitor to the first ``if`` will end the line.
+            self._end_line()
+
+    def _visit_ForLoopStatement(self, node: ast.ForLoopStatement) -> None:
+        self._start_line()
+        self.stream.write("for ")
+        self.visit(node.parameter)
+        self.stream.write(" in ")
+        if isinstance(node.indexset, ast.Range):
+            self.stream.write("[")
+            self.visit(node.indexset)
+            self.stream.write("]")
+        else:
+            self.visit(node.indexset)
+        self.stream.write(" ")
+        self.visit(node.body)
+        self._end_line()
+
+    def _visit_WhileLoopStatement(self, node: ast.WhileLoopStatement) -> None:
+        self._start_line()
+        self.stream.write("while (")
+        self.visit(node.condition)
+        self.stream.write(") ")
+        self.visit(node.body)
+        self._end_line()
+
+    def _visit_SwitchStatement(self, node: ast.SwitchStatement) -> None:
+        self._start_line()
+        self.stream.write("switch (")
+        self.visit(node.target)
+        self.stream.write(") {")
+        self._end_line()
+        self._current_indent += 1
+        for labels, case in node.cases:
+            if not labels:
+                continue
+            self._start_line()
+            self.stream.write("case ")
+            self._visit_sequence(labels, separator=", ")
+            self.stream.write(" ")
+            self.visit(case)
+            self._end_line()
+        if node.default is not None:
+            self._start_line()
+            self.stream.write("default ")
+            self.visit(node.default)
+            self._end_line()
+        self._current_indent -= 1
+        self._start_line()
+        self.stream.write("}")
+        self._end_line()
+
+    def _visit_SwitchStatementPreview(self, node: ast.SwitchStatementPreview) -> None:
+        # This is the pre-release syntax, which had lots of extra `break` statements in it.
+        self._start_line()
+        self.stream.write("switch (")
+        self.visit(node.target)
+        self.stream.write(") {")
+        self._end_line()
+        self._current_indent += 1
+        for labels, case in node.cases:
+            if not labels:
+                continue
+            for label in labels[:-1]:
+                self._start_line()
+                self.stream.write("case ")
+                self.visit(label)
+                self.stream.write(":")
+                self._end_line()
+            self._start_line()
+            if isinstance(labels[-1], ast.DefaultCase):
+                self.visit(labels[-1])
+            else:
+                self.stream.write("case ")
+                self.visit(labels[-1])
+            self.stream.write(": ")
+            self.visit(case)
+            self._end_line()
+            self._write_statement("break")
+        self._current_indent -= 1
+        self._start_line()
+        self.stream.write("}")
+        self._end_line()
+
+    def _visit_DefaultCase(self, _node: ast.DefaultCase) -> None:
+        self.stream.write("default")
+
+    def _visit_BoxStatement(self, node: ast.BoxStatement) -> None:
+        self._start_line()
+        self.stream.write("box")
+        if node.duration is not None:
+            self.stream.write("[")
+            self.visit(node.duration)
+            self.stream.write("]")
+        self.stream.write(" ")
+        self.visit(node.body)
+        self._end_line()