netgen-mesher 6.2.2506.post35.dev0__cp314-cp314-win_amd64.whl

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/sculpture.geo

@@ -0,0 +1,13 @@
+algebraic3d
+#
+# intersection of sphere and cylinders
+# motivated by a sculpture found in St. Gallen
+#
+
+solid cyls = cylinder ( -100, 0, 0; 200, 0, 0; 40 )
+          or cylinder ( 100, -100, 100; 100, 200, 100; 40)
+          or cylinder ( 0, 100, -100; 0, 100, 200; 40);
+solid sculpture = sphere (50, 50, 50; 80) and not cyls
+        and not sphere (50, 50, 50; 50);
+
+tlo sculpture -col=[0.5, 0.5, 0.5]; 

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/shaft.geo

@@ -0,0 +1,65 @@
+#
+## Crankshaft
+#
+algebraic3d
+solid p1 = plane (0, 0, 0; -1, 0, 0)
+         and plane (10, 0, 0; 1, 0, 0)
+         and
+         (     plane (35, 0, 28; 0, -1, 3)
+           and plane (35, 0, -28; 0, -1, -3)
+           and plane (35, 0, 0; 0, 1, 0)
+           and plane (35, -30, 0; 0, -1, 0)
+           or cylinder (-10, 0, 0; 20, 0, 0; 30)
+           or cylinder (-10, -30, 0; 20, -30, 0; 20)
+         );
+solid p2 = plane (35, 0, 0; -1, 0, 0)
+         and plane (45, 0, 0; 1, 0, 0)
+         and
+         (     plane (35, 0, 28; 0, -1, 3)
+           and plane (35, 0, -28; 0, -1, -3)
+           and plane (35, 0, 0; 0, 1, 0)
+           and plane (35, -30, 0; 0, -1, 0)
+           or cylinder (30, 0, 0; 50, 0, 0; 30)
+           or cylinder (30, -30, 0; 50, -30, 0; 20)
+         );
+solid p3 = plane (80, 0, 0; -1, 0, 0)
+         and plane (90, 0, 0; 1, 0, 0)
+         and
+         (     plane (0, 0, 28; 0, 1, 3)
+           and plane (0, 0, -28; 0, 1, -3)
+           and plane (0, 0, 0; 0, -1, 0)
+           and plane (0, 30, 0; 0, 1, 0)
+           or cylinder (70, 0, 0; 100, 0, 0; 30)
+           or cylinder (70, 30, 0; 100, 30, 0; 20)
+         );
+solid p4 = plane (115, 0, 0; -1, 0, 0)
+         and plane (125, 0, 0; 1, 0, 0)
+         and
+         (     plane (35, 0, 28; 0, 1, 3)
+           and plane (35, 0, -28; 0, 1, -3)
+           and plane (35, 0, 0; 0, -1, 0)
+           and plane (35, 30, 0; 0, 1, 0)
+           or cylinder (110, 0, 0; 130, 0, 0; 30)
+           or cylinder (110, 30, 0;130, 30, 0; 20)
+         );
+solid sh1 =   cylinder (-50, 0, 0; 10, 0, 0; 15)
+            and plane (-40, 0, 0; -1, 0, 0)
+            and plane (5, 0, 0; 1, 0, 0);
+solid sh2 =   cylinder (30, 0, 0; 90, 0, 0; 15)
+            and plane (40, 0, 0; -1, 0, 0)
+            and plane (85, 0, 0; 1, 0, 0);
+solid sh3 =   cylinder (110, 0, 0; 170, 0, 0; 15)
+            and plane (120, 0, 0; -1, 0, 0)
+            and plane (165, 0, 0; 1, 0, 0);
+
+solid pl1 = cylinder (0, -30, 0; 50, -30, 0; 10)
+            and plane (5, 0, 0; -1, 0, 0)
+            and plane (40, 0, 0; 1, 0, 0);
+solid pl2 = cylinder (80, 30, 0; 130, 30, 0; 10)
+            and plane (85, 0, 0; -1, 0, 0)
+            and plane (120, 0, 0; 1, 0, 0);
+#
+#
+solid main = p1 or p2 or p3 or p4 or sh1 or sh2 or sh3 or pl1 or pl2;
+
+tlo main;

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/shell.geo

@@ -0,0 +1,10 @@
+algebraic3d
+
+solid main = sphere (0, 0, 0; 1)
+        and not sphere (0, 0, 0; 0.98);
+#        or orthobrick (-0.4, -0.4, -0.4; 0.4, 0.4, 0.4);
+
+tlo main -maxh=0.02;
+
+
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/sphere.geo

@@ -0,0 +1,8 @@
+algebraic3d
+
+solid main = sphere (0, 0, 0; 1);
+
+tlo main;
+point (0, 0, 0);
+
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/sphereincube.geo

@@ -0,0 +1,17 @@
+algebraic3d
+#
+# Example with two sub-domains: 
+#
+solid cube = plane (0, 0, 0; 0, 0, -1)
+         and plane (0, 0, 0; 0, -1, 0)
+         and plane (0, 0, 0; -1, 0, 0)
+         and plane (1, 1, 1; 0, 0, 1)
+         and plane (1, 1, 1; 0, 1, 0)
+         and plane (1, 1, 1; 1, 0, 0);
+solid sph = sphere (0.5, 0.5, 0.5; 0.3);
+
+solid rest = cube and not sph;
+
+tlo rest -transparent -col=[0,0,1];
+tlo sph -col=[1,0,0];
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/square.in2d

@@ -0,0 +1,35 @@
+# keyword for 2D geometry, version 2 
+splinecurves2dv2
+
+
+# a global grading factor
+2
+
+
+# the points (point number, x and y coordinates)
+points
+1       0       0     -maxh=0.01
+2       1       0
+3       1       1
+4       0       1
+
+
+# boundary curves consisting of
+# dl    dr      np      p1      p1      flaglist
+# with 
+# dl ... sub-domain nr on left side 
+# dr ... sub-domain nr on right side 
+# np ... curve is given by 2 (or 3) points
+# p1, p2 ... points defining the curve
+# flagslist
+segments
+1       0       2       1       2       -bc=1  -maxh=0.1
+1       0       2       2       3       -bc=1
+1       0       2       3       4       -bc=1
+1       0       2       4       1       -bc=2
+
+
+materials
+1       domain1   -maxh=0.3
+
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/squarecircle.in2d

@@ -0,0 +1,48 @@
+# keyword for 2D geometry, version 2 
+splinecurves2dv2
+
+
+# a global grading factor
+2
+
+
+# the points (point number, x and y coordinates)
+points
+1       0       0   
+2       1       0
+3       1       1
+4       0       1
+5       0.5     0.4
+6       0.6     0.4
+7       0.6     0.5
+8       0.6     0.6
+9       0.5     0.6
+10       0.4     0.6
+11       0.4     0.5
+12       0.4     0.4
+
+
+# boundary curves consisting of
+# dl    dr      np      p1      p1      flaglist
+# with 
+# dl ... sub-domain nr on left side 
+# dr ... sub-domain nr on right side 
+# np ... curve is given by 2 (or 3) points
+# p1, p2 ... points defining the curve
+
+# flagslist
+segments
+1       0       2       1       2       -bc=1
+1       0       2       2       3       -bc=1
+1       0       2       3       4       -bc=1
+1       0       2       4       1       -bc=1
+2       1       3       5       6       7       -bc=2
+2       1       3       7       8       9       -bc=2
+2       1       3       9       10      11      -bc=2
+2       1       3       11      12      5       -bc=2
+
+materials
+1       domain1   -maxh=0.2
+2       domain2   -maxh=0.05
+
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/squarehole.in2d

@@ -0,0 +1,47 @@
+# keyword for 2D geometry, version 2 
+splinecurves2dv2
+
+
+# a global grading factor
+2
+
+
+# the points (point number, x and y coordinates)
+points
+1       0       0   
+2       1       0
+3       1       1
+4       0       1
+5       0.5     0.4
+6       0.6     0.4
+7       0.6     0.5
+8       0.6     0.6
+9       0.5     0.6
+10       0.4     0.6
+11       0.4     0.5
+12       0.4     0.4
+
+
+# boundary curves consisting of
+# dl    dr      np      p1      p1      flaglist
+# with 
+# dl ... sub-domain nr on left side 
+# dr ... sub-domain nr on right side 
+# np ... curve is given by 2 (or 3) points
+# p1, p2 ... points defining the curve
+
+# flagslist
+segments
+1       0       2       1       2       -bc=1
+1       0       2       2       3       -bc=1
+1       0       2       3       4       -bc=1
+1       0       2       4       1       -bc=1
+0       1       3       5       6       7       -bc=2 -maxh=0.05
+0       1       3       7       8       9       -bc=2 -maxh=0.05
+0       1       3       9       10      11      -bc=2 -maxh=0.05
+0       1       3       11      12      5       -bc=2 -maxh=0.05
+
+materials
+1       domain1   -maxh=0.2
+
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/torus.geo

@@ -0,0 +1,8 @@
+#
+## a torus
+#
+algebraic3d
+
+solid tor = torus ( 0, 0, 0; 1, 0, 0; 2 ; 1 );
+		
+tlo tor;

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/trafo.geo

@@ -0,0 +1,57 @@
+algebraic3d
+#
+# a transformer
+#
+solid core = 
+	    plane (-8,  0,  0; -1,  0,  0)
+	and plane ( 8,  0,  0;  1,  0,  0)
+	and plane ( 0, -6,  0;  0, -1,  0)
+	and plane ( 0,  6,  0;  0,  1,  0)
+	and plane ( 0,  0, -1;  0,  0, -1)
+	and plane ( 0,  0,  1;  0,  0,  1)
+	and not 
+	(    plane (-6,  0,  0; -1,  0,  0)
+	 and plane (-1,  0,  0;  1,  0,  0)
+	 and plane ( 0, -4,  0;  0, -1,  0)
+	 and plane ( 0,  4,  0;  0,  1,  0) )
+	and not 
+	(    plane ( 6,  0,  0;  1,  0,  0)
+	 and plane ( 1,  0,  0; -1,  0,  0)
+	 and plane ( 0, -4,  0;  0, -1,  0)
+	 and plane ( 0,  4,  0;  0,  1,  0) );
+
+solid coil1 =
+	        cylinder (-7, -3, 0;-7, 3, 0; 3)
+	and not cylinder (-7, -3, 0;-7, 3, 0; 2)
+	and plane (0, -3, 0; 0, -1, 0) 
+	and plane (0,  3, 0; 0,  1, 0);
+solid coil2 =
+	        cylinder ( 0, -3, 0; 0, 3, 0; 3)
+	and not cylinder ( 0, -3, 0; 0, 3, 0; 2)
+	and plane (0, -3, 0; 0, -1, 0) 
+	and plane (0,  3, 0; 0,  1, 0);
+solid coil3 =
+	        cylinder ( 7, -3, 0; 7, 3, 0; 3)
+	and not cylinder ( 7, -3, 0; 7, 3, 0; 2)
+	and plane (0, -3, 0; 0, -1, 0) 
+	and plane (0,  3, 0; 0,  1, 0);
+	
+solid box =
+	    plane (-12, 0,  0; -1,  0,  0)
+	and plane ( 12, 0,  0;  1,  0,  0)
+	and plane (  0, 8,  0;  0,  1,  0)
+	and plane (  0,-8,  0;  0, -1,  0)
+	and plane (  0, 0,  5;  0,  0,  1)
+	and plane (  0, 0, -5;  0,  0, -1);
+
+solid air = box and not core and not coil1 and not coil2 and not coil3;
+
+tlo coil1 -col=[0,1,0];
+tlo coil2 -col=[0,1,0];
+tlo coil3 -col=[0,1,0];
+tlo air -col=[0,0,1] -transparent;
+tlo core -col=[1,1,0];
+
+
+
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/twobricks.geo

@@ -0,0 +1,15 @@
+algebraic3d
+solid cube = plane (0, 0, 0; 0, 0, -1)
+         and plane (0, 0, 0; 0, -1, 0)
+         and plane (0, 0, 0; -1, 0, 0)
+         and plane (1, 1, 1; 0, 0, 1)
+         and plane (1, 1, 1; 0, 1, 0)
+         and plane (1, 1, 1; 1, 0, 0);
+solid cutplane = plane (0.5, 0, 0; -1, 0, 0);
+
+solid right = cube and cutplane;
+solid left = cube and not cutplane;
+
+tlo right -col=[1,0,0] -material=copper;
+tlo left -col=[0,0,1];
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/twocubes.geo

@@ -0,0 +1,18 @@
+algebraic3d
+
+# example with two sub-domains
+
+solid cube = plane (0, 0, 0; 0, 0, -1)
+         and plane (0, 0, 0; 0, -1, 0)
+         and plane (0, 0, 0; -1, 0, 0)
+         and plane (1, 1, 1; 0, 0, 1)
+         and plane (1, 1, 1; 0, 1, 0)
+         and plane (1, 1, 1; 1, 0, 0);
+solid cutplane = plane (0.5, 0, 0; -1, 0, 0);
+
+solid right = cube and cutplane;
+solid left = cube and not cutplane;
+
+tlo right -col=[1,0,0];
+tlo left -col=[0,0,1];
+

netgen_mesher-6.2.2506.post35.dev0.data/data/share/netgen/twocyl.geo

@@ -0,0 +1,16 @@
+algebraic3d
+
+#
+# two intersecting cylinderes
+#
+
+solid cyl1 = cylinder ( 1, 0, 0; -1, 0, 0; 0.5 )
+	and plane (-1, 0, 0; -1, 0, 0)
+	and plane (1, 0, 0; 1, 0, 0);
+solid cyl2 = cylinder ( 0, 1, 0.3; 0, -1, 0.3; 0.5 )
+	and plane (0, -1, 0; 0, -1, 0)
+	and plane (0, 1, 0; 0, 1, 0);
+solid main = cyl1 or cyl2;
+
+
+tlo main;

netgen_mesher-6.2.2506.post35.dev0.dist-info/METADATA

@@ -0,0 +1,15 @@
+Metadata-Version: 2.4
+Name: netgen-mesher
+Version: 6.2.2506.post35.dev0
+Summary: Netgen
+Author: The Netgen team
+License: LGPL2.1
+License-File: LICENSE
+License-File: AUTHORS
+Requires-Dist: netgen-occt==7.8.1
+Requires-Dist: numpy
+Dynamic: author
+Dynamic: license
+Dynamic: license-file
+Dynamic: requires-dist
+Dynamic: summary