mg-pso-gui 0.1.40__py3-none-any.whl → 0.2.75__py3-none-any.whl

mgpsogui/gui/OptionManager_backup.py

@@ -0,0 +1,443 @@
+from tkinter import StringVar as sv
+from tkinter import IntVar as iv
+from tkinter import BooleanVar as bv
+from tkinter import DoubleVar as dv
+import json
+
+class OptionManager():
+    
+    def __init__(self):
+        
+        self.project_data = {"name": "", "path": ""}
+        self.arguments = {"param": [],
+                 "url": sv(),
+                 "urls": {},
+                 "mode": sv(),
+                 "files": {},
+                 "calibration_parameters": [],
+                 "service_parameters": [],
+                 "figure_parameters": [],
+                 "sensitivity_parameters": [],
+                 "sensitivity_positiveBestMetrics": [],
+                 "sensitivity_negativeBestMetrics": []}
+        
+        self.steps = []
+        self.service_parameters = {}
+
+        self.service_modes = ["Sampling: Halton", "Sampling: Random", "Sensitivity Analysis", "Optimization"]
+        for mode in self.service_modes:
+            self.arguments["urls"][mode] = sv()
+
+            
+    def clear(self):
+        self.arguments['param'].clear()
+        self.arguments['url'].set("")
+        for mode in self.service_modes:
+            self.arguments["urls"][mode].set("")
+        self.arguments['mode'].set("Optimization")
+        self.arguments['files'] = {}
+        self.arguments['calibration_parameters'].clear()
+        self.arguments['service_parameters'].clear()
+        self.arguments['figure_parameters'].clear()
+        self.arguments['sensitivity_parameters'].clear()
+        self.arguments['sensitivity_positiveBestMetrics'].clear()
+        self.arguments['sensitivity_negativeBestMetrics'].clear()
+        self.steps = []
+        self.service_parameters = {}
+    
+    def add_arguments(self, arguments):
+            
+        if ("mode" in arguments):
+            self.arguments["mode"].set(arguments["mode"])
+
+        if ("url" in arguments):
+            self.arguments["urls"][self.arguments["mode"].get()].set(arguments["url"])
+            
+        if ("files" in arguments):
+            for file in arguments["files"]:
+                name = file["name"]
+                value = file["value"]
+                obj = {"name": sv(), "value": sv()}
+                obj["name"].set(name)
+                obj["value"].set(value)
+                self.arguments["files"][name] = obj
+        
+        for param in arguments["param"]:
+            name = param["name"]
+            value = param["value"]
+            obj = {"name": sv(), "value": sv()}
+            obj["name"].set(name)
+            obj["value"].set(value)
+            self.arguments["param"].append(obj)
+            
+        for param in arguments["calibration_parameters"]:
+            name = param["name"]
+            value = param["value"]
+            obj = {"name": sv(), "value": sv()}
+            obj["name"].set(name)
+            obj["value"].set(value)
+            self.arguments["calibration_parameters"].append(obj)
+
+        for param in arguments["service_parameters"]:
+            name = param["name"]
+            value = param["value"]
+            obj = {"name": sv(), "value": sv()}
+            obj["name"].set(name)
+            obj["value"].set(value)
+            self.arguments["service_parameters"].append(obj)
+            
+    def add_steps(self, steps):
+        for step in steps:
+            obj = {"param": [], 
+                    "overrideparam": [],
+                    "objfunc": [], 
+                    "name": sv(), 
+                    "open": False}
+            obj["name"].set("Group " + str(len(self.steps) + 1))
+            
+            if "param" in step:
+                for param in step["param"]:
+                    param_obj = {
+                        "name": sv(), 
+                        "bounds": (sv(), sv()), 
+                        "default_value": sv(), 
+                        "optimal_value": sv(), 
+                        "type": sv(),
+                        "calibration_strategy": sv()
+                    }
+                    param_obj["name"].set(param["name"])
+                    if "bounds" in param:
+                        param_obj["bounds"][0].set(param["bounds"][0])
+                        param_obj["bounds"][1].set(param["bounds"][1]) 
+                    else: 
+                        param_obj["bounds"][0].set(0)
+                        param_obj["bounds"][1].set(1)
+                        
+                    if "type" in param:
+                        param_obj["type"].set(param["type"])
+                    else:
+                        param_obj["type"].set("float")
+                        
+                    if "default_value" in param:
+                        param_obj["default_value"].set(param["default_value"])
+                    else:
+                        param_obj["default_value"].set(1)
+                        
+                    if "optimal_value" in param:
+                        param_obj["optimal_value"].set(param["optimal_value"])
+                    else:
+                        param_obj["optimal_value"].set(0)
+                        
+                    if "calibration_strategy" in param:
+                        param_obj["calibration_strategy"].set(param["calibration_strategy"])
+                    else:
+                        param_obj["calibration_strategy"].set("none")
+                        
+                    obj["param"].append(param_obj)
+            
+            if "overrideparam" in step:
+                for override in step["overrideparam"]:
+                    override_obj = {"name": sv(), "value": sv()}
+                    override_obj['name'].set(override['name'])
+                    override_obj['value'].set(override['value'])
+                    obj['overrideparam'].append(override_obj)
+
+            if "objfunc" in step:
+                for objfunc in step["objfunc"]:
+                    objfunc_obj = {"name": sv(), 
+                                    "of": sv(), 
+                                    "weight": sv(), 
+                                    "custom_function": sv(),
+                                    "custom_function_goal": sv(),
+                                    "custom_function_value": sv(),
+                                    "data": (sv(), sv())}
+                    objfunc_obj["name"].set(objfunc["name"])
+                    objfunc_obj["of"].set(objfunc["of"])
+                    objfunc_obj["custom_function_goal"].set("Positive Best")
+                    
+                    if ("weight" in objfunc): 
+                        objfunc_obj["weight"].set(objfunc["weight"])
+                    else:
+                        objfunc_obj["weight"].set(1)
+                        
+                    if ("custom_function" in objfunc):
+                        objfunc_obj["custom_function"].set(objfunc["custom_function"])
+                    if ("custom_function_goal" in objfunc):
+                        objfunc_obj["custom_function_goal"].set(objfunc["custom_function_goal"])
+                    if ("custom_function_value" in objfunc):
+                        objfunc_obj["custom_function_value"].set(objfunc["custom_function_value"])
+
+                    objfunc_obj["data"][0].set(objfunc["data"][0])
+                    objfunc_obj["data"][1].set(objfunc["data"][1]) 
+                    obj["objfunc"].append(objfunc_obj)
+            
+            self.steps.append(obj)
+    
+    def add_function(self, step_index):
+        obj = {"name": sv(), 
+                "of": sv(), 
+                "weight": sv(), 
+                "custom_function": sv(),
+                "custom_function_goal": sv(),
+                "custom_function_value": sv(),
+                "data": (sv(), sv())}
+        obj["name"].set("ns")
+        obj["of"].set("ns")
+        obj["weight"].set(1)
+        obj["data"][0].set("")
+        obj["data"][1].set("")
+        obj["custom_function"].set("") 
+        obj["custom_function_goal"].set("")
+        obj["custom_function_value"].set("") 
+        
+        self.steps[step_index]["objfunc"].append(obj)
+        
+    def remove_function(self, step_index, index):
+        self.steps[step_index]["objfunc"].pop(index)
+        
+    def dupe_function(self, step_index, index):
+        my_func = self.steps[step_index]["objfunc"][index]
+        
+        new_object = {"name": sv(), 
+                        "of": sv(), 
+                        "weight": sv(), 
+                        "custom_function": sv(),
+                        "custom_function_goal": sv(),
+                        "custom_function_value": sv(),
+                        "data": (sv(), sv())}
+        new_object["name"].set(my_func["name"].get())
+        new_object["of"].set(my_func["of"].get())
+        new_object["weight"].set(my_func["weight"].get())
+        new_object["data"][0].set(my_func["data"][0].get())
+        new_object["data"][1].set(my_func["data"][1].get())
+        new_object["custom_function"].set(my_func["custom_function"].get())
+        new_object["custom_function_goal"].set(my_func["custom_function_goal"].get())
+        new_object["custom_function_value"].set(my_func["custom_function_value"].get())
+        
+        self.steps[step_index]["objfunc"].append(new_object)
+    
+    def add_bound(self, step_index, 
+                  name="name", 
+                  min=0, 
+                  max=1,
+                  type="float",
+                  default_value=1,
+                  optimal_value=0,
+                  calibration_strategy="none"):
+        obj = {
+            "name": sv(), 
+            "bounds": (sv(), sv()), 
+            "default_value": sv(), 
+            "optimal_value": sv(),
+            "type": sv(),
+            "calibration_strategy": sv()
+        }
+        obj["name"].set(name)
+        obj["type"].set(type)
+        obj["default_value"].set(default_value)
+        obj["optimal_value"].set(optimal_value)
+        obj["calibration_strategy"].set(calibration_strategy)
+        obj["bounds"][0].set(min)
+        obj["bounds"][1].set(max)
+        self.steps[step_index]["param"].append(obj)
+        
+    def remove_bound(self, step_index, index):
+        self.steps[step_index]["param"].pop(index)
+        
+    def add_override(self, step_index, name, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(name)
+        obj["value"].set(value)
+        self.steps[step_index]["overrideparam"].append(obj)
+
+    def remove_override(self, step_index, index):
+        self.steps[step_index]["overrideparam"].pop(index)
+
+    def get_override(self, step_index):
+        return self.steps[step_index]["overrideparam"]
+
+    def add_argument(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["param"].append(obj)
+        
+    def add_calibration_param(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["calibration_parameters"].append(obj)
+
+    def add_service_param(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["service_parameters"].append(obj)
+
+    def add_figure_param(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["figure_parameters"].append(obj)
+
+    def add_sensitivity_param(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["sensitivity_parameters"].append(obj)
+
+    def add_sensitivity_positiveBestMetrics(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["sensitivity_positiveBestMetrics"].append(obj)
+
+    def add_sensitivity_negativeBestMetrics(self, key, value):
+        obj = {"name": sv(), "value": sv()}
+        obj["name"].set(key)
+        obj["value"].set(value)
+        self.arguments["sensitivity_negativeBestMetrics"].append(obj)
+    
+    def move_argument_up(self, index):
+        if index > 0:
+            self.arguments["param"][index], self.arguments["param"][index - 1] = self.arguments["param"][index - 1], self.arguments["param"][index]
+            
+    def move_argument_down(self, index):
+        if index < len(self.arguments["param"]) - 1:
+            self.arguments["param"][index], self.arguments["param"][index + 1] = self.arguments["param"][index + 1], self.arguments["param"][index]
+            
+    def move_step_up(self, index):
+        if index > 0:
+            self.steps[index], self.steps[index - 1] = self.steps[index - 1], self.steps[index]
+            
+    def move_step_down(self, index):
+        if index < len(self.steps) - 1:
+            self.steps[index], self.steps[index + 1] = self.steps[index + 1], self.steps[index]
+            
+    def toggle_step_open(self, index):
+        self.steps[index]["open"] = not self.steps[index]["open"]
+            
+    def remove_argument(self, index):
+        self.arguments["param"].pop(index)
+        
+    def remove_calibration_parameter(self, index):
+        self.arguments["calibration_parameters"].pop(index)
+
+    def remove_service_parameter(self, index):
+        self.arguments["service_parameters"].pop(index)
+
+    def remove_figure_parameter(self, index):
+        self.arguments["figure_parameters"].pop(index)
+
+    def remove_sensitivity_parameter(self, index):
+        self.arguments["sensitivity_parameters"].pop(index)
+
+    def remove_sensitivity_positiveBestMetrics(self, index):
+        self.arguments["sensitivity_positiveBestMetrics"].pop(index)
+
+    def remove_sensitivity_negativeBestMetrics(self, index):
+        self.arguments["sensitivity_negativeBestMetrics"].pop(index)
+        
+    def remove_step(self, index):
+        self.steps.pop(index)
+            
+    def get_project_data(self):
+        return self.project_data
+            
+    def set_path(self, filename):
+        file_name = filename.split("/")[-1].replace(".json", "")
+        path = filename.replace(file_name + ".json", "")
+        self.project_data["path"] = path
+        self.project_data["name"] = file_name
+            
+    def get_arguments(self):
+        return self.arguments
+    
+    def get_steps(self):
+        return self.steps
+        
+    def get_all_as_json(self):
+        obj = {"arguments": self.arguments, "steps": self.steps}
+        return obj
+    
+    def set_service_parameters(self, service_parameters):
+        self.service_parameters = service_parameters
+    
+    def get_service_parameters(self):
+        return self.service_parameters
+
+    def get_metrics(self):
+
+        self.arguments["url"].set(self.arguments["urls"][self.arguments["mode"].get()].get())
+
+        result = {}
+        result['arguments'] = {}
+        result['calibration_parameters'] = []
+        result['service_parameters'] = []
+        result['service_parameters'] = {}
+        result['project_data'] = self.project_data
+        for key, value in self.arguments.items():
+            if key == 'url' or key == 'mode':
+                result['arguments'][key] = value.get()
+            elif key == 'files':
+                result['arguments'][key] = {}
+                #for name, obj in value.items():
+                #    result['arguments'][key].append({'name': obj['name'].get(), 'value': obj['value'].get()})
+            elif key == 'param':
+                result['arguments'][key] = []
+                for obj in value:
+                    result['arguments'][key].append({'name': obj['name'].get(), 'value': obj['value'].get()})
+            elif key == "calibration_parameters":
+                #result['calibration_parameters'][key] = []
+                for obj in value:
+                    result['calibration_parameters'].append({'name': obj['name'].get(), 'value': obj['value'].get()})
+            elif key == "service_parameters":
+                #result['service_parameters'][key] = []
+                for obj in value:
+                    result['service_parameters'].append({'name': obj['name'].get(), 'value': obj['value'].get()})
+        result['steps'] = []
+        for step in self.steps:
+            step_result = {}
+            #step_result['name'] = step['name'].get()
+            #step_result['open'] = step['open']
+            step_result['param'] = []
+            for param in step['param']:
+                # try converting the bounds to numbers
+                #try:
+                if param['type'].get() == 'float':
+                    step_result['param'].append(
+                        {
+                            'name': param['name'].get(), 
+                            'bounds': (float(param['bounds'][0].get()), 
+                                       float(param['bounds'][1].get())),
+                            'default_value': float(param['default_value'].get()),
+                            'optimal_value': float(param['optimal_value'].get()),
+                            'type': 'float',
+                            'calibration_strategy': param['calibration_strategy'].get()
+                        }
+                    )
+                elif param['type'].get() == 'list':
+                    step_result['param'].append(
+                        {
+                            'name': param['name'].get(), 
+                            'bounds': (float(param['bounds'][0].get()), 
+                                       float(param['bounds'][1].get())),
+                            'default_value': param['default_value'].get(),
+                            'optimal_value': param['optimal_value'].get(),
+                            'type': 'list',
+                            'calibration_strategy': param['calibration_strategy'].get()
+                        }
+                    )
+                #except ValueError:
+                #    step_result['param'].append(
+                #        {
+                #            'name': param['name'].get(), 
+                #            'bounds': (param['bounds'][0].get(), 
+                #                       param['bounds'][1].get())
+                #        }
+                #    )
+            step_result['objfunc'] = []
+            for objfunc in step['objfunc']:
+                step_result['objfunc'].append({'name': objfunc['name'].get(), 'of': objfunc['of'].get(), 'weight': float(objfunc['weight'].get()), 'data': (objfunc['data'][0].get(), objfunc['data'][1].get())})
+            result['steps'].append(step_result)
+        return result

mgpsogui/gui/PlatformTab/PlatformTab.py

@@ -5,6 +5,8 @@ import subprocess
 import customtkinter
 import platform
 
+from ..General import ParameterView as pv
+
 import tkinter as tk
 
 def create_tab(self, tab):
@@ -16,7 +18,7 @@ def create_tab(self, tab):
         response_json = json.loads(response.text)
         status = response.status_code
         
-        self.option_manager.set_service_parameters(response_json)
+        self.option_manager.set_data(response_json)
         self.tabview.configure(state="enabled")
         
         self.service_status.delete('0.0', tk.END)
@@ -67,7 +69,7 @@ def create_tab(self, tab):
             
                 
     def open_terminal_and_run_cluster():
-        full_path = os.path.abspath(os.path.join(os.path.dirname(__file__), '..', 'start.yaml'))
+        full_path = os.path.abspath(os.path.join(os.path.dirname(__file__), '..', '..', 'start.yaml'))
         command = "minikube kubectl -- create -f " + full_path + " ; sleep 60 ; minikube service pf8087-csu-csip-oms -n csip"
         #command = "minikube kubectl -- create -f " + full_path + " ; until [[ $(minikube kubectl -- get pods -l app=pf8087-csu-csip-oms -n csip -o \\'jsonpath={..status.conditions[?(@.type==\\\"Ready\\\")].status}\\') == \\\"True\\\" ]]; do echo \\\"waiting for pod\\\" && sleep 1; done ; minikube service pf8087-csu-csip-oms -n csip"
         
@@ -114,6 +116,7 @@ def create_tab(self, tab):
     
     tab.grid_columnconfigure(0, weight=1)
     tab.grid_columnconfigure(1, weight=1)
+    tab.grid_columnconfigure(2, weight=1)
     tab.grid_rowconfigure(0, weight=1)
     
     """
@@ -131,9 +134,15 @@ def create_tab(self, tab):
     self.load_parameters.grid(row=0, column=2, padx=(20, 20), pady=(20, 20), sticky="nsew")
     
     """
+
+    self.service_param_frame = pv.ParameterView(tab, option_manager=self.option_manager, list_name="service_parameters", label_text="Service Parameters")
+    self.service_param_frame.grid(row=0, column=0, padx=(20, 20), pady=(20, 20), sticky="nsew")
+    self.service_param_frame.grid_columnconfigure(0, weight=1)
+    self.service_param_frame.grid_rowconfigure(0, weight=1)
+
             
-    self.service_editor = customtkinter.CTkScrollableFrame(tab, label_text="Service Editor")
-    self.service_editor.grid(row=0, column=0, padx=(20, 20), pady=(20, 20), sticky="nsew")
+    self.service_editor = customtkinter.CTkScrollableFrame(tab, label_text="Service Status")
+    self.service_editor.grid(row=0, column=1, padx=(20, 20), pady=(20, 20), sticky="nsew")
     self.service_editor.grid_columnconfigure(0, weight=1)
     self.service_editor.grid_rowconfigure(0, weight=1)
     
@@ -161,8 +170,8 @@ def create_tab(self, tab):
     self.service_details = customtkinter.CTkTextbox(self.service_editor, height=480)
     self.service_details.grid(row=8, column=0, padx=(20, 20), pady=(5, 5), sticky="ew")
     
-    self.environment_editor = customtkinter.CTkScrollableFrame(tab, label_text="Environment Editor")
-    self.environment_editor.grid(row=0, column=1, padx=(20, 20), pady=(20, 20), sticky="nsew")
+    self.environment_editor = customtkinter.CTkScrollableFrame(tab, label_text="Minikube Environment Editor")
+    self.environment_editor.grid(row=0, column=2, padx=(20, 20), pady=(20, 20), sticky="nsew")
     self.environment_editor.grid_columnconfigure(0, weight=1)
     self.environment_editor.grid_rowconfigure(0, weight=1)
     

mgpsogui/gui/RunTab/OptimalParameterView.py

@@ -0,0 +1,47 @@
+from customtkinter import CTkScrollableFrame
+from customtkinter import CTkFrame
+from customtkinter import CTkLabel
+from customtkinter import CTkButton
+from customtkinter import CTkEntry
+import tkinter as tk
+
+class OptimalParameterView(CTkScrollableFrame):
+    def __init__(self, *args,
+                 option_manager: None,
+                 **kwargs):
+        super().__init__(*args, **kwargs)
+        
+        self.option_manager = option_manager
+        
+        self.render()
+
+    def clear(self):
+        self.containerFrame.destroy()
+        
+    def render(self):
+        row = 0
+        
+        self.containerFrame = CTkFrame(self)
+        self.containerFrame.grid(row=0, column=0, padx=(5, 5), pady=(5, 5), sticky="nsew")
+        self.containerFrame.grid_columnconfigure((0, 1), weight=1)
+        
+        self.mode = self.option_manager.get_mode()
+        self.steps = self.option_manager.get_steps()
+
+        for step in self.steps:
+            
+            if self.mode != "Sampling: Random" and self.mode != "Sampling: Halton":
+                name = step['name'].get()
+                CTkLabel(self.containerFrame, text=name).grid(row=row, column=0, columnspan=1, padx=5, pady=5, sticky="")
+                row += 1
+            
+            for param in step['parameter_objects']:
+                CTkEntry(self.containerFrame, textvariable=param['name']).grid(row=row, column=0, padx=(5, 5), pady=(5, 5), sticky="ew")
+            
+                bb = CTkEntry(self.containerFrame)
+                bb.grid(row=row, column=1, padx=(5, 5), pady=(5, 5), sticky="ew")
+                bb.configure(textvariable=param['optimal_value'])
+                row += 1
+                
+            if self.mode != "Optimization":
+                break