homeassistant 2025.8.1__py3-none-any.whl → 2025.8.3__py3-none-any.whl

homeassistant/components/zha/translations/lt.json

@@ -2,9 +2,9 @@
     "config": {
         "abort": {
             "invalid_zeroconf_data": "Koordinatorius turi neteising\u0105 Zeroconf paslaugos informacij\u0105 ir ZHA negali jo identifikuoti",
-            "not_zha_device": "\u0160is \u012frenginys n\u0117ra ZHA \u012frenginys",
+            "not_zha_device": "\u0160is prietaisas n\u0117ra ZHA prietaisas",
             "single_instance_allowed": "Jau sukonfig\u016bruota. Galima tik viena konfig\u016bracija.",
-            "usb_probe_failed": "Nepavyko patikrinti USB \u012frenginio",
+            "usb_probe_failed": "Nepavyko patikrinti USB prietaiso",
             "wrong_firmware_installed": "J\u016bs\u0173 prietaise veikia netinkama programin\u0117-technin\u0117 \u012franga ir jo negalima naudoti su ZHA, kol ne\u012fdiegta tinkama programin\u0117-technin\u0117 \u012franga. [Sukurtas remontas]({repair_url}) su daugiau informacijos ir instrukcijomis, kaip tai i\u0161spr\u0119sti."
         },
         "error": {
@@ -33,7 +33,7 @@
             },
             "choose_serial_port": {
                 "data": {
-                    "path": "Serijinio \u012frenginio kelias"
+                    "path": "Serijinio prietaiso kelias"
                 },
                 "description": "Pasirinkite savo \u201eZigbee\u201c radijo nuosekl\u0173j\u012f prievad\u0105",
                 "title": "Pasirinkite nuosekl\u0173j\u012f prievad\u0105"
@@ -88,15 +88,15 @@
             "title": "Signalizacijos valdymo pulto parinktys"
         },
         "zha_options": {
-            "consider_unavailable_battery": "Laikyti baterijomis maitinamus \u012frenginius nepasiekiamais po (sekund\u017ei\u0173)",
-            "consider_unavailable_mains": "Laikyti, kad i\u0161 elektros tinklo maitinami \u012frenginiai nepasiekiami po (sekund\u017ei\u0173)",
+            "consider_unavailable_battery": "Laikyti baterijomis maitinamus prietaisus nepasiekiamais po (sekund\u017ei\u0173)",
+            "consider_unavailable_mains": "Laikyti i\u0161 elektros tinklo maitinamus prietaisus nepasiekiamus po (sekund\u017ei\u0173)",
             "default_light_transition": "Numatytasis \u0161viesos per\u0117jimo laikas (sekund\u0117mis)",
             "enable_identify_on_join": "\u012egalinti identifikavimo efekt\u0105, kai prietaisai prisijungia prie tinklo",
-            "enable_mains_startup_polling": "\u012erengini\u0173, maitinam\u0173 i\u0161 elektros tinklo, atnaujinimo b\u016bsena paleidimo metu",
+            "enable_mains_startup_polling": "Atnaujinti prietais\u0173, maitinam\u0173 i\u0161 elektros tinklo, b\u016bsen\u0105 paleidimo metu",
             "enhanced_light_transition": "\u012egalinti patobulint\u0105 \u0161viesos spalvos/temperat\u016bros per\u0117jim\u0105 i\u0161 i\u0161jungtos b\u016bsenos",
             "group_members_assume_state": "Grup\u0117s nariai perima grup\u0117s b\u016bsen\u0105",
-            "light_transitioning_flag": "\u012egalinti padidinto ry\u0161kumo slankikl\u012f \u0161viesos per\u0117jimo metu",
-            "title": "Pasaulin\u0117s galimyb\u0117s"
+            "light_transitioning_flag": "\u012egalinti pagerint\u0105 ry\u0161kumo slankikl\u012f \u0161viesos per\u0117jimo metu",
+            "title": "Visuotiniai nustatymai"
         }
     },
     "device_automation": {
@@ -196,6 +196,18 @@
             "flow_switch": {
                 "name": "Srauto jungiklis"
             },
+            "frient_in_1": {
+                "name": "IN1"
+            },
+            "frient_in_2": {
+                "name": "IN2"
+            },
+            "frient_in_3": {
+                "name": "IN3"
+            },
+            "frient_in_4": {
+                "name": "IN4"
+            },
             "frost_lock": {
                 "name": "U\u017eraktas nuo u\u017e\u0161alimo"
             },
@@ -252,6 +264,9 @@
             "frost_lock_reset": {
                 "name": "U\u017e\u0161alimo u\u017erakto atstatymas"
             },
+            "reset_alarm": {
+                "name": "Atstatyti aliarm\u0105"
+            },
             "reset_frost_lock": {
                 "name": "U\u017e\u0161alimo u\u017erakto atstatymas"
             },
@@ -262,7 +277,7 @@
                 "name": "Suvestin\u0117 i\u0161 naujo pateikta"
             },
             "restart_device": {
-                "name": "I\u0161 naujo paleiskite \u012frengin\u012f"
+                "name": "I\u0161 naujo paleisti prietais\u0105"
             },
             "self_test": {
                 "name": "Sav\u0119s i\u0161bandymas"
@@ -861,7 +876,7 @@
                 "name": "Aptikimo jautrumas"
             },
             "device_mode": {
-                "name": "\u012erenginio re\u017eimas"
+                "name": "Prietaiso re\u017eimas"
             },
             "display_brightness": {
                 "name": "Ekrano ry\u0161kumas"
@@ -1085,7 +1100,7 @@
                 "name": "Prietaiso veikimo laikas"
             },
             "device_status": {
-                "name": "\u012erenginio b\u016bsena"
+                "name": "Prietaiso b\u016bsena"
             },
             "device_temperature": {
                 "name": "Prietaiso temperat\u016bra"
@@ -1386,6 +1401,9 @@
             "todays_max_light_intensity": {
                 "name": "Did\u017eiausias \u0161iandienos \u0161viesos intensyvumas"
             },
+            "total_active_power": {
+                "name": "Bendra galia"
+            },
             "total_power_factor": {
                 "name": "Bendras galios koeficientas"
             },
@@ -1460,6 +1478,9 @@
             "display_enabled": {
                 "name": "Ekranas \u012fjungtas"
             },
+            "distance_tracking": {
+                "name": "Atstumo steb\u0117jimas"
+            },
             "double_tap_down_enabled": {
                 "name": "\u012ejungtas dvigubas bakstel\u0117jimas \u017eemyn"
             },
@@ -1490,6 +1511,12 @@
             "firmware_progress_led": {
                 "name": "Programin\u0117s-technin\u0117s \u012frangos pa\u017eangos \u0161viesos diodas"
             },
+            "frient_com_1": {
+                "name": "COM 1"
+            },
+            "frient_com_2": {
+                "name": "COM 2"
+            },
             "frost_lock": {
                 "name": "U\u017eraktas nuo \u0161al\u010dio"
             },
@@ -1628,6 +1655,9 @@
             "valve_on_off_2": {
                 "name": "Vo\u017etuvas 2"
             },
+            "water_shortage_auto_close": {
+                "name": "Automatinis u\u017edarymas d\u0117l vandens tr\u016bkumo"
+            },
             "window_detection": {
                 "name": "Lang\u0173 aptikimas"
             },
@@ -1663,9 +1693,9 @@
     },
     "options": {
         "abort": {
-            "not_zha_device": "\u0160is \u012frenginys n\u0117ra ZHA \u012frenginys",
+            "not_zha_device": "\u0160is prietaisas n\u0117ra ZHA prietaisas",
             "single_instance_allowed": "Jau sukonfig\u016bruota. Galima tik viena konfig\u016bracija.",
-            "usb_probe_failed": "Nepavyko patikrinti USB \u012frenginio",
+            "usb_probe_failed": "Nepavyko patikrinti USB prietaiso",
             "wrong_firmware_installed": "J\u016bs\u0173 prietaise veikia netinkama programin\u0117-technin\u0117 \u012franga ir jo negalima naudoti su ZHA, kol ne\u012fdiegta tinkama programin\u0117-technin\u0117 \u012franga. [Sukurtas remontas]({repair_url}) su daugiau informacijos ir instrukcijomis, kaip tai i\u0161spr\u0119sti."
         },
         "error": {
@@ -1694,7 +1724,7 @@
             },
             "choose_serial_port": {
                 "data": {
-                    "path": "Serijinio \u012frenginio kelias"
+                    "path": "Serijinio prietaiso kelias"
                 },
                 "description": "Pasirinkite savo \u201eZigbee\u201c radijo nuosekl\u0173j\u012f prievad\u0105",
                 "title": "Pasirinkite nuosekl\u0173j\u012f prievad\u0105"
@@ -1870,22 +1900,22 @@
                     "name": "IEEE"
                 },
                 "install_code": {
-                    "description": "\u012ediekite sujungimo \u012frenginio kod\u0105 (turi b\u016bti sujungtas su laukeliu 'Source IEEE').",
-                    "name": "\u012ediegti kod\u0105"
+                    "description": "Prisijun\u010dian\u010dio prietaiso \u012fdiegimo kodas (turi b\u016bti naudojamas kartu su \u201eIEEE adresas\u201c).",
+                    "name": "\u012ediegimo kodas"
                 },
                 "qr_code": {
-                    "description": "Pateikiamas ir IEEE adresas, ir prisijungimo \u012frenginio diegimo kodas (tiek\u0117jai skiriasi).",
+                    "description": "Pateikia ir IEEE adres\u0105, ir prisijun\u010dian\u010dio prietaiso diegimo kod\u0105 (skiriasi tarp tiek\u0117j\u0173).",
                     "name": "QR kodas"
                 },
                 "source_ieee": {
-                    "description": "Jungiamojo \u012frenginio IEEE adresas (turi b\u016bti sujungtas su laukeliu '\u012ediegti kod\u0105').",
-                    "name": "\u0160altinis IEEE"
+                    "description": "Prisijun\u010dian\u010dio prietaiso IEEE adresas (turi b\u016bti naudojamas kartu su \u201e\u012ediegimo kodas\u201c).",
+                    "name": "IEEE adresas"
                 }
             },
             "name": "Leidimas"
         },
         "reconfigure_device": {
-            "description": "I\u0161 naujo sukonfig\u016bruoja ZHA \u012frengin\u012f (gydymo \u012frengin\u012f). Naudokite tai, jei kyla problem\u0173 d\u0117l \u012frenginio. Jei aptariamas \u012frenginys yra baterija maitinamas \u012frenginys, atlikdami \u0161\u012f veiksm\u0105 \u012fsitikinkite, kad jis yra budrus ir priima komandas.",
+            "description": "I\u0161 naujo sukonfig\u016bruoja ZHA prietais\u0105 (gydo prietais\u0105). Naudokite tai, jei kyla problem\u0173 d\u0117l prietaiso. Jei aptariamas prietaisas yra maitinamas baterijomis, atlikdami \u0161\u012f veiksm\u0105 \u012fsitikinkite, kad jis yra budrus ir priima komandas.",
             "fields": {
                 "ieee": {
                     "description": "Prietaiso, kur\u012f reikia konfig\u016bruoti, IEEE adresas.",

homeassistant/components/zimi/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/zimi",
   "iot_class": "local_push",
   "quality_scale": "bronze",
-  "requirements": ["zcc-helper==3.5.2"]
+  "requirements": ["zcc-helper==3.6"]
 }

homeassistant/components/zimi/translations/ga.json

@@ -1,10 +1,21 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in"
+        },
         "error": {
-            "connection_refused": "Di\u00falta\u00edodh an nasc"
+            "cannot_connect": "Theip ar an nascadh",
+            "connection_refused": "Di\u00falta\u00edodh an nasc",
+            "invalid_host": "Ainm \u00f3stach n\u00f3 seoladh IP neamhbhail\u00ed",
+            "timeout": "Am cr\u00edochnaithe ag bun\u00fa nasc",
+            "unknown": "Earr\u00e1id gan choinne"
         },
         "step": {
             "manual": {
+                "data": {
+                    "host": "\u00d3stach",
+                    "port": "Port"
+                },
                 "data_description": {
                     "host": "\u00c9igeantach - seoladh IP ZCC.",
                     "port": "\u00c9igeantach - uimhir phoirt ZCC (r\u00e9amhshocraithe=5003)."
@@ -14,6 +25,8 @@
             },
             "selection": {
                 "data": {
+                    "host": "\u00d3stach",
+                    "port": "Port",
                     "selected_host_and_port": "ZCC Roghnaithe"
                 },
                 "data_description": {

homeassistant/components/zwave_js/config_flow.py

@@ -35,6 +35,7 @@ from homeassistant.const import CONF_NAME, CONF_URL
 from homeassistant.core import HomeAssistant, callback
 from homeassistant.data_entry_flow import AbortFlow
 from homeassistant.exceptions import HomeAssistantError
+from homeassistant.helpers import selector
 from homeassistant.helpers.hassio import is_hassio
 from homeassistant.helpers.service_info.hassio import HassioServiceInfo
 from homeassistant.helpers.service_info.usb import UsbServiceInfo
@@ -88,16 +89,36 @@ ADDON_USER_INPUT_MAP = {
     CONF_ADDON_LR_S2_AUTHENTICATED_KEY: CONF_LR_S2_AUTHENTICATED_KEY,
 }
 
+CONF_ADDON_RF_REGION = "rf_region"
+
+EXAMPLE_SERVER_URL = "ws://localhost:3000"
 ON_SUPERVISOR_SCHEMA = vol.Schema({vol.Optional(CONF_USE_ADDON, default=True): bool})
 MIN_MIGRATION_SDK_VERSION = AwesomeVersion("6.61")
 
 NETWORK_TYPE_NEW = "new"
 NETWORK_TYPE_EXISTING = "existing"
+ZWAVE_JS_SERVER_INSTRUCTIONS = (
+    "https://www.home-assistant.io/integrations/zwave_js/"
+    "#advanced-installation-instructions"
+)
 ZWAVE_JS_UI_MIGRATION_INSTRUCTIONS = (
     "https://www.home-assistant.io/integrations/zwave_js/"
     "#how-to-migrate-from-one-adapter-to-a-new-adapter-using-z-wave-js-ui"
 )
 
+RF_REGIONS = [
+    "Australia/New Zealand",
+    "China",
+    "Europe",
+    "Hong Kong",
+    "India",
+    "Israel",
+    "Japan",
+    "Korea",
+    "Russia",
+    "USA",
+]
+
 
 def get_manual_schema(user_input: dict[str, Any]) -> vol.Schema:
     """Return a schema for the manual step."""
@@ -190,10 +211,12 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         self.backup_data: bytes | None = None
         self.backup_filepath: Path | None = None
         self.use_addon = False
+        self._addon_config_updates: dict[str, Any] = {}
         self._migrating = False
         self._reconfigure_config_entry: ZwaveJSConfigEntry | None = None
         self._usb_discovery = False
         self._recommended_install = False
+        self._rf_region: str | None = None
 
     async def async_step_install_addon(
         self, user_input: dict[str, Any] | None = None
@@ -231,6 +254,21 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
         """Start Z-Wave JS add-on."""
+        if self.hass.config.country is None and (
+            not self._rf_region or self._rf_region == "Automatic"
+        ):
+            # If the country is not set, we need to check the RF region add-on config.
+            addon_info = await self._async_get_addon_info()
+            rf_region: str | None = addon_info.options.get(CONF_ADDON_RF_REGION)
+            self._rf_region = rf_region
+            if rf_region is None or rf_region == "Automatic":
+                # If the RF region is not set, we need to ask the user to select it.
+                return await self.async_step_rf_region()
+        if config_updates := self._addon_config_updates:
+            # If we have updates to the add-on config, set them before starting the add-on.
+            self._addon_config_updates = {}
+            await self._async_set_addon_config(config_updates)
+
         if not self.start_task:
             self.start_task = self.hass.async_create_task(self._async_start_addon())
 
@@ -529,7 +567,12 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         """Handle a manual configuration."""
         if user_input is None:
             return self.async_show_form(
-                step_id="manual", data_schema=get_manual_schema({})
+                step_id="manual",
+                data_schema=get_manual_schema({}),
+                description_placeholders={
+                    "example_server_url": EXAMPLE_SERVER_URL,
+                    "server_instructions": ZWAVE_JS_SERVER_INSTRUCTIONS,
+                },
             )
 
         errors = {}
@@ -558,7 +601,13 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
             return self._async_create_entry_from_vars()
 
         return self.async_show_form(
-            step_id="manual", data_schema=get_manual_schema(user_input), errors=errors
+            step_id="manual",
+            data_schema=get_manual_schema(user_input),
+            description_placeholders={
+                "example_server_url": EXAMPLE_SERVER_URL,
+                "server_instructions": ZWAVE_JS_SERVER_INSTRUCTIONS,
+            },
+            errors=errors,
         )
 
     async def async_step_hassio(
@@ -613,6 +662,33 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
             return await self.async_step_on_supervisor({CONF_USE_ADDON: True})
         return await self.async_step_on_supervisor()
 
+    async def async_step_rf_region(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Handle RF region selection step."""
+        if user_input is not None:
+            # Store the selected RF region
+            self._addon_config_updates[CONF_ADDON_RF_REGION] = self._rf_region = (
+                user_input["rf_region"]
+            )
+            return await self.async_step_start_addon()
+
+        schema = vol.Schema(
+            {
+                vol.Required("rf_region"): selector.SelectSelector(
+                    selector.SelectSelectorConfig(
+                        options=RF_REGIONS,
+                        mode=selector.SelectSelectorMode.DROPDOWN,
+                    )
+                ),
+            }
+        )
+
+        return self.async_show_form(
+            step_id="rf_region",
+            data_schema=schema,
+        )
+
     async def async_step_on_supervisor(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
@@ -712,7 +788,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
                     CONF_ADDON_LR_S2_AUTHENTICATED_KEY: self.lr_s2_authenticated_key,
                 }
 
-                await self._async_set_addon_config(addon_config_updates)
+                self._addon_config_updates = addon_config_updates
                 return await self.async_step_start_addon()
 
             # Network already exists, go to security keys step
@@ -783,7 +859,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
                 CONF_ADDON_LR_S2_AUTHENTICATED_KEY: self.lr_s2_authenticated_key,
             }
 
-            await self._async_set_addon_config(addon_config_updates)
+            self._addon_config_updates = addon_config_updates
             return await self.async_step_start_addon()
 
         data_schema = vol.Schema(
@@ -988,7 +1064,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         if user_input is not None:
             if self.usb_path:
                 # USB discovery was used, so the device is already known.
-                await self._async_set_addon_config({CONF_ADDON_DEVICE: self.usb_path})
+                self._addon_config_updates[CONF_ADDON_DEVICE] = self.usb_path
                 return await self.async_step_start_addon()
             # Now that the old controller is gone, we can scan for serial ports again
             return await self.async_step_choose_serial_port()
@@ -1016,6 +1092,10 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
             return self.async_show_form(
                 step_id="manual_reconfigure",
                 data_schema=get_manual_schema({CONF_URL: config_entry.data[CONF_URL]}),
+                description_placeholders={
+                    "example_server_url": EXAMPLE_SERVER_URL,
+                    "server_instructions": ZWAVE_JS_SERVER_INSTRUCTIONS,
+                },
             )
 
         errors = {}
@@ -1046,6 +1126,10 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         return self.async_show_form(
             step_id="manual_reconfigure",
             data_schema=get_manual_schema(user_input),
+            description_placeholders={
+                "example_server_url": EXAMPLE_SERVER_URL,
+                "server_instructions": ZWAVE_JS_SERVER_INSTRUCTIONS,
+            },
             errors=errors,
         )
 
@@ -1112,6 +1196,8 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
                 CONF_ADDON_LR_S2_AUTHENTICATED_KEY: self.lr_s2_authenticated_key,
             }
 
+            addon_config_updates = self._addon_config_updates | addon_config_updates
+            self._addon_config_updates = {}
             await self._async_set_addon_config(addon_config_updates)
 
             if addon_info.state == AddonState.RUNNING and not self.restart_addon:
@@ -1183,7 +1269,7 @@ class ZWaveJSConfigFlow(ConfigFlow, domain=DOMAIN):
         """Choose a serial port."""
         if user_input is not None:
             self.usb_path = user_input[CONF_USB_PATH]
-            await self._async_set_addon_config({CONF_ADDON_DEVICE: self.usb_path})
+            self._addon_config_updates[CONF_ADDON_DEVICE] = self.usb_path
             return await self.async_step_start_addon()
 
         try:

homeassistant/components/zwave_js/sensor.py

@@ -4,15 +4,15 @@ from __future__ import annotations
 
 from collections.abc import Callable, Mapping
 from dataclasses import dataclass
-from typing import Any
+from typing import Any, cast
 
 import voluptuous as vol
-from zwave_js_server.const import CommandClass
+from zwave_js_server.const import CommandClass, RssiError
 from zwave_js_server.const.command_class.meter import (
     RESET_METER_OPTION_TARGET_VALUE,
     RESET_METER_OPTION_TYPE,
 )
-from zwave_js_server.exceptions import BaseZwaveJSServerError
+from zwave_js_server.exceptions import BaseZwaveJSServerError, RssiErrorReceived
 from zwave_js_server.model.controller import Controller
 from zwave_js_server.model.controller.statistics import ControllerStatistics
 from zwave_js_server.model.driver import Driver
@@ -1049,7 +1049,7 @@ class ZWaveStatisticsSensor(SensorEntity):
         self,
         config_entry: ZwaveJSConfigEntry,
         driver: Driver,
-        statistics_src: ZwaveNode | Controller,
+        statistics_src: Controller | ZwaveNode,
         description: ZWaveJSStatisticsSensorEntityDescription,
     ) -> None:
         """Initialize a Z-Wave statistics entity."""
@@ -1080,13 +1080,31 @@ class ZWaveStatisticsSensor(SensorEntity):
         )
 
     @callback
-    def statistics_updated(self, event_data: dict) -> None:
+    def _statistics_updated(self, event_data: dict) -> None:
         """Call when statistics updated event is received."""
-        self._attr_native_value = self.entity_description.convert(
-            event_data["statistics_updated"], self.entity_description.key
+        statistics = cast(
+            ControllerStatistics | NodeStatistics, event_data["statistics_updated"]
         )
+        self._set_statistics(statistics)
         self.async_write_ha_state()
 
+    @callback
+    def _set_statistics(
+        self, statistics: ControllerStatistics | NodeStatistics
+    ) -> None:
+        """Set updated statistics."""
+        try:
+            self._attr_native_value = self.entity_description.convert(
+                statistics, self.entity_description.key
+            )
+        except RssiErrorReceived as err:
+            if err.error is RssiError.NOT_AVAILABLE:
+                self._attr_available = False
+                return
+            self._attr_native_value = None
+        # Reset available state.
+        self._attr_available = True
+
     async def async_added_to_hass(self) -> None:
         """Call when entity is added."""
         self.async_on_remove(
@@ -1104,10 +1122,8 @@ class ZWaveStatisticsSensor(SensorEntity):
             )
         )
         self.async_on_remove(
-            self.statistics_src.on("statistics updated", self.statistics_updated)
+            self.statistics_src.on("statistics updated", self._statistics_updated)
         )
 
         # Set initial state
-        self._attr_native_value = self.entity_description.convert(
-            self.statistics_src.statistics, self.entity_description.key
-        )
+        self._set_statistics(self.statistics_src.statistics)

homeassistant/components/zwave_js/strings.json

@@ -82,13 +82,21 @@
         "title": "Installing add-on"
       },
       "manual": {
+        "description": "The Z-Wave integration requires a running Z-Wave Server. If you don't already have that set up, please read the [instructions]({server_instructions}) in our documentation.\n\nWhen you have a Z-Wave Server running, enter its URL below to allow the integration to connect.",
         "data": {
           "url": "[%key:common::config_flow::data::url%]"
+        },
+        "data_description": {
+          "url": "The URL of the Z-Wave Server WebSocket API, e.g. {example_server_url}"
         }
       },
       "manual_reconfigure": {
+        "description": "[%key:component::zwave_js::config::step::manual::description%]",
         "data": {
           "url": "[%key:common::config_flow::data::url%]"
+        },
+        "data_description": {
+          "url": "[%key:component::zwave_js::config::step::manual::data_description::url%]"
         }
       },
       "on_supervisor": {
@@ -105,6 +113,16 @@
         "description": "[%key:component::zwave_js::config::step::on_supervisor::description%]",
         "title": "[%key:component::zwave_js::config::step::on_supervisor::title%]"
       },
+      "rf_region": {
+        "title": "Z-Wave region",
+        "description": "Select the RF region for your Z-Wave network.",
+        "data": {
+          "rf_region": "RF region"
+        },
+        "data_description": {
+          "rf_region": "The radio frequency region for your Z-Wave network. This must match the region of your Z-Wave devices."
+        }
+      },
       "start_addon": {
         "title": "Configuring add-on"
       },

homeassistant/components/zwave_js/translations/cs.json

@@ -100,12 +100,20 @@
             "manual": {
                 "data": {
                     "url": "URL"
-                }
+                },
+                "data_description": {
+                    "url": "URL adresa API WebSocketu serveru Z-Wave, nap\u0159 {example_server_url}"
+                },
+                "description": "Integrace Z-Wave vy\u017eaduje spu\u0161t\u011bn\u00fd Z-Wave Server. Pokud jej je\u0161t\u011b nem\u00e1te nastaven\u00fd, p\u0159e\u010dt\u011bte si [pokyny]({server_instructions}) v na\u0161\u00ed dokumentaci.\n \nPokud m\u00e1te spu\u0161t\u011bn\u00fd Z-Wave Server, zadejte n\u00ed\u017ee jeho URL adresu, aby se integrace mohla p\u0159ipojit."
             },
             "manual_reconfigure": {
                 "data": {
                     "url": "URL"
-                }
+                },
+                "data_description": {
+                    "url": "URL adresa API WebSocketu serveru Z-Wave, nap\u0159 {example_server_url}"
+                },
+                "description": "Integrace Z-Wave vy\u017eaduje spu\u0161t\u011bn\u00fd Z-Wave Server. Pokud jej je\u0161t\u011b nem\u00e1te nastaven\u00fd, p\u0159e\u010dt\u011bte si [pokyny]({server_instructions}) v na\u0161\u00ed dokumentaci.\n \nPokud m\u00e1te spu\u0161t\u011bn\u00fd Z-Wave Server, zadejte n\u00ed\u017ee jeho URL adresu, aby se integrace mohla p\u0159ipojit."
             },
             "network_type": {
                 "data": {
@@ -140,6 +148,16 @@
                 "submit": "Zkusit znovu",
                 "title": "Obnoven\u00ed se nepoda\u0159ilo"
             },
+            "rf_region": {
+                "data": {
+                    "rf_region": "Oblast RF"
+                },
+                "data_description": {
+                    "rf_region": "R\u00e1diov\u00e1 frekven\u010dn\u00ed oblast va\u0161\u00ed s\u00edt\u011b Z-Wave. Mus\u00ed se shodovat s oblast\u00ed va\u0161ich za\u0159\u00edzen\u00ed Z-Wave."
+                },
+                "description": "Vyberte oblast RF pro va\u0161i Z-Wave s\u00ed\u0165.",
+                "title": "Oblast Z-Wave"
+            },
             "start_addon": {
                 "title": "Nastavov\u00e1n\u00ed dopl\u0148ku"
             },

homeassistant/components/zwave_js/translations/de.json

@@ -100,12 +100,20 @@
             "manual": {
                 "data": {
                     "url": "URL"
-                }
+                },
+                "data_description": {
+                    "url": "Die URL der Z-Wave Server WebSocket API, z.B. {example_server_url}"
+                },
+                "description": "Die Z-Wave-Integration erfordert einen laufenden Z-Wave-Server. Falls du diesen noch nicht eingerichtet hast, lies bitte die [Anleitung]({server_instructions}) in unserer Dokumentation. \n \nWenn ein Z-Wave-Server l\u00e4uft, gib unten dessen URL ein, damit die Integration eine Verbindung herstellen kann."
             },
             "manual_reconfigure": {
                 "data": {
                     "url": "URL"
-                }
+                },
+                "data_description": {
+                    "url": "Die URL der Z-Wave Server WebSocket API, z.B. {example_server_url}"
+                },
+                "description": "Die Z-Wave-Integration erfordert einen laufenden Z-Wave-Server. Falls du diesen noch nicht eingerichtet hast, lies bitte die [Anleitung]({server_instructions}) in unserer Dokumentation. \n \nWenn ein Z-Wave-Server l\u00e4uft, gib unten dessen URL ein, damit die Integration eine Verbindung herstellen kann."
             },
             "network_type": {
                 "data": {
@@ -140,6 +148,16 @@
                 "submit": "Erneut versuchen",
                 "title": "Wiederherstellung fehlgeschlagen"
             },
+            "rf_region": {
+                "data": {
+                    "rf_region": "Funkregion"
+                },
+                "data_description": {
+                    "rf_region": "Die Funkfrequenzregion f\u00fcr dein Z-Wave-Netzwerk. Diese muss mit der Region deiner Z-Wave-Ger\u00e4te \u00fcbereinstimmen."
+                },
+                "description": "W\u00e4hle die Funkregion f\u00fcr dein Z-Wave-Netzwerk.",
+                "title": "Z-Wave-Region"
+            },
             "start_addon": {
                 "title": "Add-on wird konfiguriert"
             },

homeassistant/components/zwave_js/translations/el.json

@@ -99,12 +99,20 @@
             "manual": {
                 "data": {
                     "url": "URL"
-                }
+                },
+                "data_description": {
+                    "url": "\u0397 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 URL \u03c4\u03bf\u03c5 API WebSocket \u03c4\u03bf\u03c5 Z-Wave server, \u03c0.\u03c7. {example_server_url}"
+                },
+                "description": "\u0397 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03c4\u03bf\u03c5 Z-Wave \u03b1\u03c0\u03b1\u03b9\u03c4\u03b5\u03af \u03ad\u03bd\u03b1\u03bd \u03b5\u03ba\u03c4\u03b5\u03bb\u03bf\u03cd\u03bc\u03b5\u03bd\u03bf Z-Wave server. \u0395\u03ac\u03bd \u03b4\u03b5\u03bd \u03c4\u03bf\u03bd \u03ad\u03c7\u03b5\u03c4\u03b5 \u03ae\u03b4\u03b7 \u03b5\u03b3\u03ba\u03b1\u03c4\u03b1\u03c3\u03c4\u03ae\u03c3\u03b5\u03b9, \u03c0\u03b1\u03c1\u03b1\u03ba\u03b1\u03bb\u03ce \u03b4\u03b9\u03b1\u03b2\u03ac\u03c3\u03c4\u03b5 \u03c4\u03b9\u03c2 [\u03bf\u03b4\u03b7\u03b3\u03af\u03b5\u03c2]({server_instructions}) \u03c3\u03c4\u03b7\u03bd \u03c4\u03b5\u03ba\u03bc\u03b7\u03c1\u03af\u03c9\u03c3\u03ae \u03bc\u03b1\u03c2.\n\n\u039f\u03c4\u03b1\u03bd \u03ad\u03c7\u03b5\u03c4\u03b5 \u03ad\u03bd\u03b1\u03bd Z-Wave server \u03bf\u03c5\u03c1\u03b3\u03af\u03b1, \u03b5\u03b9\u03c3\u03ac\u03b3\u03b5\u03c4\u03b5 \u03c4\u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 URL \u03c4\u03bf\u03c5 \u03c0\u03b1\u03c1\u03b1\u03ba\u03ac\u03c4\u03c9 \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03b5\u03c0\u03b9\u03c4\u03c1\u03ad\u03c8\u03b5\u03c4\u03b5 \u03c3\u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03bd\u03b1 \u03c3\u03c5\u03bd\u03b4\u03b5\u03b8\u03b5\u03af."
             },
             "manual_reconfigure": {
                 "data": {
                     "url": "URL"
-                }
+                },
+                "data_description": {
+                    "url": "\u0397 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 URL \u03c4\u03bf\u03c5 API WebSocket \u03c4\u03bf\u03c5 Z-Wave server, \u03c0.\u03c7. {example_server_url}"
+                },
+                "description": "\u0397 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03c4\u03bf\u03c5 Z-Wave \u03b1\u03c0\u03b1\u03b9\u03c4\u03b5\u03af \u03ad\u03bd\u03b1\u03bd \u03b5\u03ba\u03c4\u03b5\u03bb\u03bf\u03cd\u03bc\u03b5\u03bd\u03bf Z-Wave server. \u0395\u03ac\u03bd \u03b4\u03b5\u03bd \u03c4\u03bf\u03bd \u03ad\u03c7\u03b5\u03c4\u03b5 \u03ae\u03b4\u03b7 \u03b5\u03b3\u03ba\u03b1\u03c4\u03b1\u03c3\u03c4\u03ae\u03c3\u03b5\u03b9, \u03c0\u03b1\u03c1\u03b1\u03ba\u03b1\u03bb\u03ce \u03b4\u03b9\u03b1\u03b2\u03ac\u03c3\u03c4\u03b5 \u03c4\u03b9\u03c2 [\u03bf\u03b4\u03b7\u03b3\u03af\u03b5\u03c2]({server_instructions}) \u03c3\u03c4\u03b7\u03bd \u03c4\u03b5\u03ba\u03bc\u03b7\u03c1\u03af\u03c9\u03c3\u03ae \u03bc\u03b1\u03c2.\n\n\u039f\u03c4\u03b1\u03bd \u03ad\u03c7\u03b5\u03c4\u03b5 \u03ad\u03bd\u03b1\u03bd Z-Wave server \u03bf\u03c5\u03c1\u03b3\u03af\u03b1, \u03b5\u03b9\u03c3\u03ac\u03b3\u03b5\u03c4\u03b5 \u03c4\u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 URL \u03c4\u03bf\u03c5 \u03c0\u03b1\u03c1\u03b1\u03ba\u03ac\u03c4\u03c9 \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03b5\u03c0\u03b9\u03c4\u03c1\u03ad\u03c8\u03b5\u03c4\u03b5 \u03c3\u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03bd\u03b1 \u03c3\u03c5\u03bd\u03b4\u03b5\u03b8\u03b5\u03af."
             },
             "network_type": {
                 "data": {