homeassistant 2025.7.3__py3-none-any.whl → 2025.7.4__py3-none-any.whl

homeassistant/components/homeassistant_sky_connect/translations/en-GB.json

@@ -7,6 +7,7 @@
             "addon_set_config_failed": "Failed to set {addon_name} configuration.",
             "addon_start_failed": "Failed to start the {addon_name} add-on.",
             "fw_download_failed": "{firmware_name} firmware for your {model} failed to download. Make sure Home Assistant has internet access and try again.",
+            "fw_install_failed": "{firmware_name} firmware failed to install, check Home Assistant logs for more information.",
             "not_hassio": "The hardware options can only be configured on Home Assistant OS installations.",
             "not_hassio_thread": "The OpenThread Border Router add-on can only be installed with Home Assistant OS. If you would like to use the {model} as a Thread border router, please flash the firmware manually using the [web flasher]({docs_web_flasher_url}) and set up OpenThread Border Router to communicate with it.",
             "otbr_addon_already_running": "The OpenThread Border Router add-on is already running, it cannot be installed again.",
@@ -18,6 +19,7 @@
         "flow_title": "{model}",
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
+            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
             "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
         },
@@ -65,6 +67,7 @@
             "addon_set_config_failed": "Failed to set {addon_name} configuration.",
             "addon_start_failed": "Failed to start the {addon_name} add-on.",
             "fw_download_failed": "{firmware_name} firmware for your {model} failed to download. Make sure Home Assistant has internet access and try again.",
+            "fw_install_failed": "{firmware_name} firmware failed to install, check Home Assistant logs for more information.",
             "not_hassio": "The hardware options can only be configured on Home Assistant OS installations.",
             "not_hassio_thread": "The OpenThread Border Router add-on can only be installed with Home Assistant OS. If you would like to use the {model} as a Thread border router, please flash the firmware manually using the [web flasher]({docs_web_flasher_url}) and set up OpenThread Border Router to communicate with it.",
             "otbr_addon_already_running": "The OpenThread Border Router add-on is already running, it cannot be installed again.",
@@ -78,6 +81,7 @@
         },
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
+            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
             "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
         },
@@ -87,23 +91,23 @@
             },
             "addon_menu": {
                 "menu_options": {
-                    "reconfigure_addon": "Reconfigure IEEE 802.15.4 radio multiprotocol support",
-                    "uninstall_addon": "Remove IEEE 802.15.4 radio multiprotocol support"
+                    "reconfigure_addon": "Reconfigure IEEE 802.15.4 radio multi-protocol support",
+                    "uninstall_addon": "Remove IEEE 802.15.4 radio multi-protocol support"
                 }
             },
             "addon_not_installed": {
                 "data": {
-                    "enable_multi_pan": "Enable multiprotocol support"
+                    "enable_multi_pan": "Enable multi-protocol support"
                 },
-                "description": "When multiprotocol support is enabled, the {hardware_name}'s IEEE 802.15.4 radio can be used for both Zigbee and Thread (used by Matter) at the same time. If the radio is already used by the ZHA Zigbee integration, ZHA will be reconfigured to use the multiprotocol firmware.\n\nNote: This is an experimental feature.",
-                "title": "Enable multiprotocol support on the IEEE 802.15.4 radio"
+                "description": "When multi-protocol support is enabled, the {hardware_name}'s IEEE 802.15.4 radio can be used for both Zigbee and Thread (used by Matter) at the same time. If the radio is already used by the ZHA Zigbee integration, ZHA will be reconfigured to use the multi-protocol firmware.\n\nNote: This is an experimental feature.",
+                "title": "Enable multi-protocol support on the IEEE 802.15.4 radio"
             },
             "change_channel": {
                 "data": {
                     "channel": "Channel"
                 },
                 "description": "Start a channel change for your Zigbee and Thread networks.\n\nNote: this is an advanced operation and can leave your Thread and Zigbee networks inoperable if the new channel is congested. Depending on existing network conditions, many of your devices may not migrate to the new channel and will require re-joining before they start working again. Use with caution.\n\nOnce you have selected **Submit**, the channel change starts quietly in the background and will finish after a few minutes.",
-                "title": "Reconfigure IEEE 802.15.4 radio multiprotocol support"
+                "title": "Reconfigure IEEE 802.15.4 radio multi-protocol support"
             },
             "confirm_otbr": {
                 "description": "Your {model} is now an OpenThread Border Router and will show up in the Thread integration.",
@@ -141,7 +145,7 @@
                 "title": "Pick your firmware"
             },
             "reconfigure_addon": {
-                "title": "Reconfigure IEEE 802.15.4 radio multiprotocol support"
+                "title": "Reconfigure IEEE 802.15.4 radio multi-protocol support"
             },
             "start_addon": {
                 "title": "The Silicon Labs Multiprotocol add-on is starting."
@@ -152,10 +156,10 @@
             },
             "uninstall_addon": {
                 "data": {
-                    "disable_multi_pan": "Disable multiprotocol support"
+                    "disable_multi_pan": "Disable multi-protocol support"
                 },
-                "description": "Disabling multiprotocol support will revert your {hardware_name}'s radio back to Zigbee-only firmware and will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restoring a backup.",
-                "title": "Remove IEEE 802.15.4 radio multiprotocol support"
+                "description": "Disabling multi-protocol support will revert your {hardware_name}'s radio back to Zigbee-only firmware and will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restoring a backup.",
+                "title": "Remove IEEE 802.15.4 radio multi-protocol support"
             }
         }
     }

homeassistant/components/homeassistant_sky_connect/translations/es.json

@@ -11,7 +11,7 @@
             "not_hassio": "Las opciones de hardware solo se pueden configurar en instalaciones de Home Assistant OS.",
             "not_hassio_thread": "El complemento OpenThread Border Router solo se puede instalar con Home Assistant OS. Si quieres utilizar {model} como Thread Border Router, por favor, actualiza el firmware manualmente mediante el [web flasher]({docs_web_flasher_url}) y configura OpenThread Border Router para que se comunique con \u00e9l.",
             "otbr_addon_already_running": "El complemento OpenThread Border Router ya se est\u00e1 ejecutando y no se puede volver a instalar.",
-            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento y vuelve a intentarlo.",
+            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento e int\u00e9ntalo de nuevo.",
             "unsupported_firmware": "No se pudo determinar el firmware de la radio de tu {model}. Aseg\u00farate de que ninguna otra integraci\u00f3n o complemento est\u00e9 intentando comunicarse con el dispositivo. Si ejecutas Home Assistant OS en una m\u00e1quina virtual o en Docker, aseg\u00farate de que los permisos del dispositivo est\u00e9n configurados correctamente.",
             "zha_migration_failed": "La migraci\u00f3n de ZHA no tuvo \u00e9xito.",
             "zha_still_using_stick": "{model} est\u00e1 en uso por la integraci\u00f3n de Zigbee Home Automation. Por favor, migra tu red Zigbee a otro adaptador o elimina la integraci\u00f3n e int\u00e9ntalo de nuevo."
@@ -71,7 +71,7 @@
             "not_hassio": "Las opciones de hardware solo se pueden configurar en instalaciones de Home Assistant OS.",
             "not_hassio_thread": "El complemento OpenThread Border Router solo se puede instalar con Home Assistant OS. Si quieres utilizar {model} como Thread Border Router, por favor, actualiza el firmware manualmente mediante el [web flasher]({docs_web_flasher_url}) y configura OpenThread Border Router para que se comunique con \u00e9l.",
             "otbr_addon_already_running": "El complemento OpenThread Border Router ya se est\u00e1 ejecutando y no se puede volver a instalar.",
-            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento y vuelve a intentarlo.",
+            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento e int\u00e9ntalo de nuevo.",
             "unsupported_firmware": "No se pudo determinar el firmware de la radio de tu {model}. Aseg\u00farate de que ninguna otra integraci\u00f3n o complemento est\u00e9 intentando comunicarse con el dispositivo. Si ejecutas Home Assistant OS en una m\u00e1quina virtual o en Docker, aseg\u00farate de que los permisos del dispositivo est\u00e9n configurados correctamente.",
             "zha_migration_failed": "La migraci\u00f3n de ZHA no tuvo \u00e9xito.",
             "zha_still_using_stick": "{model} est\u00e1 en uso por la integraci\u00f3n de Zigbee Home Automation. Por favor, migra tu red Zigbee a otro adaptador o elimina la integraci\u00f3n e int\u00e9ntalo de nuevo."

homeassistant/components/homeassistant_yellow/translations/en-GB.json

@@ -14,6 +14,7 @@
             "addon_set_config_failed": "Failed to set {addon_name} configuration.",
             "addon_start_failed": "Failed to start the {addon_name} add-on.",
             "fw_download_failed": "{firmware_name} firmware for your {model} failed to download. Make sure Home Assistant has internet access and try again.",
+            "fw_install_failed": "{firmware_name} firmware failed to install, check Home Assistant logs for more information.",
             "not_hassio": "The hardware options can only be configured on Home Assistant OS installations.",
             "not_hassio_thread": "The OpenThread Border Router add-on can only be installed with Home Assistant OS. If you would like to use the {model} as a Thread border router, please flash the firmware manually using the [web flasher]({docs_web_flasher_url}) and set up OpenThread Border Router to communicate with it.",
             "otbr_addon_already_running": "The OpenThread Border Router add-on is already running, it cannot be installed again.",
@@ -29,6 +30,7 @@
         },
         "progress": {
             "install_addon": "Please wait while the {addon_name} add-on installation finishes. This can take several minutes.",
+            "install_firmware": "Please wait while {firmware_name} firmware is installed to your {model}, this will take a few minutes. Do not make any changes to your hardware or software until this finishes.",
             "start_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds.",
             "start_otbr_addon": "Please wait while the {addon_name} add-on start completes. This may take some seconds."
         },
@@ -38,23 +40,23 @@
             },
             "addon_menu": {
                 "menu_options": {
-                    "reconfigure_addon": "Reconfigure IEEE 802.15.4 radio multiprotocol support",
-                    "uninstall_addon": "Remove IEEE 802.15.4 radio multiprotocol support"
+                    "reconfigure_addon": "Reconfigure IEEE 802.15.4 radio multi-protocol support",
+                    "uninstall_addon": "Remove IEEE 802.15.4 radio multi-protocol support"
                 }
             },
             "addon_not_installed": {
                 "data": {
-                    "enable_multi_pan": "Enable multiprotocol support"
+                    "enable_multi_pan": "Enable multi-protocol support"
                 },
-                "description": "When multiprotocol support is enabled, the {hardware_name}'s IEEE 802.15.4 radio can be used for both Zigbee and Thread (used by Matter) at the same time. If the radio is already used by the ZHA Zigbee integration, ZHA will be reconfigured to use the multiprotocol firmware.\n\nNote: This is an experimental feature.",
-                "title": "Enable multiprotocol support on the IEEE 802.15.4 radio"
+                "description": "When multi-protocol support is enabled, the {hardware_name}'s IEEE 802.15.4 radio can be used for both Zigbee and Thread (used by Matter) at the same time. If the radio is already used by the ZHA Zigbee integration, ZHA will be reconfigured to use the multi-protocol firmware.\n\nNote: This is an experimental feature.",
+                "title": "Enable multi-protocol support on the IEEE 802.15.4 radio"
             },
             "change_channel": {
                 "data": {
                     "channel": "Channel"
                 },
                 "description": "Start a channel change for your Zigbee and Thread networks.\n\nNote: this is an advanced operation and can leave your Thread and Zigbee networks inoperable if the new channel is congested. Depending on existing network conditions, many of your devices may not migrate to the new channel and will require re-joining before they start working again. Use with caution.\n\nOnce you have selected **Submit**, the channel change starts quietly in the background and will finish after a few minutes.",
-                "title": "Reconfigure IEEE 802.15.4 radio multiprotocol support"
+                "title": "Reconfigure IEEE 802.15.4 radio multi-protocol support"
             },
             "confirm_otbr": {
                 "description": "Your {model} is now an OpenThread Border Router and will show up in the Thread integration.",
@@ -83,7 +85,7 @@
                 "menu_options": {
                     "firmware_settings": "Switch between Zigbee or Thread firmware.",
                     "hardware_settings": "Configure hardware settings",
-                    "multipan_settings": "Configure IEEE 802.15.4 radio multiprotocol support"
+                    "multipan_settings": "Configure IEEE 802.15.4 radio multi-protocol support"
                 }
             },
             "notify_channel_change": {
@@ -115,7 +117,7 @@
                 "title": "Reboot required"
             },
             "reconfigure_addon": {
-                "title": "Reconfigure IEEE 802.15.4 radio multiprotocol support"
+                "title": "Reconfigure IEEE 802.15.4 radio multi-protocol support"
             },
             "start_addon": {
                 "title": "The Silicon Labs Multiprotocol add-on is starting."
@@ -126,10 +128,10 @@
             },
             "uninstall_addon": {
                 "data": {
-                    "disable_multi_pan": "Disable multiprotocol support"
+                    "disable_multi_pan": "Disable multi-protocol support"
                 },
-                "description": "Disabling multiprotocol support will revert your {hardware_name}'s radio back to Zigbee-only firmware and will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restoring a backup.",
-                "title": "Remove IEEE 802.15.4 radio multiprotocol support"
+                "description": "Disabling multi-protocol support will revert your {hardware_name}'s radio back to Zigbee-only firmware and will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restoring a backup.",
+                "title": "Remove IEEE 802.15.4 radio multi-protocol support"
             }
         }
     }

homeassistant/components/homeassistant_yellow/translations/es.json

@@ -18,7 +18,7 @@
             "not_hassio": "Las opciones de hardware solo se pueden configurar en instalaciones de Home Assistant OS.",
             "not_hassio_thread": "El complemento OpenThread Border Router solo se puede instalar con Home Assistant OS. Si quieres utilizar {model} como Thread Border Router, por favor, actualiza el firmware manualmente mediante el [web flasher]({docs_web_flasher_url}) y configura OpenThread Border Router para que se comunique con \u00e9l.",
             "otbr_addon_already_running": "El complemento OpenThread Border Router ya se est\u00e1 ejecutando y no se puede volver a instalar.",
-            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento y vuelve a intentarlo.",
+            "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento e int\u00e9ntalo de nuevo.",
             "read_hw_settings_error": "No se pudo leer la configuraci\u00f3n del hardware",
             "unsupported_firmware": "No se pudo determinar el firmware de la radio de tu {model}. Aseg\u00farate de que ninguna otra integraci\u00f3n o complemento est\u00e9 intentando comunicarse con el dispositivo.",
             "write_hw_settings_error": "No se pudo escribir la configuraci\u00f3n del hardware",

homeassistant/components/homee/translations/he.json

@@ -63,6 +63,8 @@
         "select": {
             "repeater_mode": {
                 "state": {
+                    "level1": "\u05e8\u05de\u05d4 1",
+                    "level2": "\u05e8\u05de\u05d4 2",
                     "off": "\u05db\u05d1\u05d5\u05d9"
                 }
             }

homeassistant/components/homematicip_cloud/translations/en-GB.json

@@ -34,29 +34,29 @@
     },
     "services": {
         "activate_eco_mode_with_duration": {
-            "description": "Activates the eco mode for a specified duration.",
+            "description": "Activates the eco-mode for a specified duration.",
             "fields": {
                 "accesspoint_id": {
                     "description": "The ID of the Homematic IP access point.",
                     "name": "Access point ID"
                 },
                 "duration": {
-                    "description": "The duration of eco mode in minutes.",
+                    "description": "The duration of eco-mode in minutes.",
                     "name": "Duration"
                 }
             },
-            "name": "Activate eco mode with duration"
+            "name": "Activate eco-mode with duration"
         },
         "activate_eco_mode_with_period": {
-            "description": "Activates the eco mode until a given time.",
+            "description": "Activates the eco-mode until a given time.",
             "fields": {
                 "accesspoint_id": {
                     "description": "The ID of the Homematic IP access point.",
                     "name": "Access point ID"
                 },
                 "endtime": {
-                    "description": "The time when the eco mode should automatically be disabled.",
-                    "name": "Endtime"
+                    "description": "The time when the eco-mode should automatically be disabled.",
+                    "name": "End-time"
                 }
             },
             "name": "Activate eco mode with period"
@@ -70,7 +70,7 @@
                 },
                 "endtime": {
                     "description": "The time when the holiday mode should automatically be disabled.",
-                    "name": "Endtime"
+                    "name": "End-time"
                 },
                 "temperature": {
                     "description": "The set temperature during the holiday mode.",

homeassistant/components/homewizard/translations/en-GB.json

@@ -59,6 +59,16 @@
                 "name": "Status light brightness"
             }
         },
+        "select": {
+            "battery_group_mode": {
+                "name": "Battery group mode",
+                "state": {
+                    "standby": "Standby",
+                    "to_full": "Manual charge mode",
+                    "zero": "Zero mode"
+                }
+            }
+        },
         "sensor": {
             "active_apparent_power_phase_va": {
                 "name": "Apparent power phase {phase}"
@@ -158,6 +168,9 @@
         "api_disabled": {
             "message": "The local API is disabled."
         },
+        "api_unauthorized": {
+            "message": "The local API is unauthorized. Restore API access by following the instructions in the repair issue."
+        },
         "communication_error": {
             "message": "An error occurred while communicating with your HomeWizard Energy device"
         }

homeassistant/components/html5/translations/en-GB.json

@@ -28,6 +28,7 @@
     },
     "services": {
         "dismiss": {
+            "description": "Dismisses an HTML5 notification.",
             "fields": {
                 "data": {
                     "description": "Extended information of notification. Supports tag.",

homeassistant/components/huawei_lte/translations/ga.json

@@ -31,6 +31,27 @@
             "nei_cellid": {
                 "name": "Aitheantas cille comharsanachta"
             },
+            "nrrank": {
+                "name": "Rang 5G"
+            },
+            "nrrsrp": {
+                "name": "5G RSRP"
+            },
+            "nrrsrq": {
+                "name": "5G RSRQ"
+            },
+            "nrsinr": {
+                "name": "5G SINR"
+            },
+            "nrtxpower": {
+                "name": "Cumhacht tarchuir 5G"
+            },
+            "nrulbandwidth": {
+                "name": "Bandaleithead suasnasc 5G"
+            },
+            "nrulmcs": {
+                "name": "MCS nasc suas 5G"
+            },
             "rxlev": {
                 "name": "Leibh\u00e9al comhartha faighte"
             },

homeassistant/components/hue/translations/el.json

@@ -193,9 +193,11 @@
                     "name": "\u0394\u03c5\u03bd\u03b1\u03bc\u03b9\u03ba\u03cc"
                 },
                 "group_name": {
+                    "description": "\u039f\u03bd\u03bf\u03bc\u03b1 \u03c4\u03b7\u03c2 \u03bf\u03bc\u03ac\u03b4\u03b1\u03c2/\u03c4\u03bf\u03c5 \u03b4\u03c9\u03bc\u03b1\u03c4\u03af\u03bf\u03c5 Hue \u03b1\u03c0\u03cc \u03c4\u03b7\u03bd \u03b5\u03c6\u03b1\u03c1\u03bc\u03bf\u03b3\u03ae Hue.",
                     "name": "\u039f\u03bc\u03ac\u03b4\u03b1"
                 },
                 "scene_name": {
+                    "description": "\u039f\u03bd\u03bf\u03bc\u03b1 \u03c4\u03b7\u03c2 \u03c3\u03ba\u03b7\u03bd\u03ae\u03c2 Hue \u03b1\u03c0\u03cc \u03c4\u03b7\u03bd \u03b5\u03c6\u03b1\u03c1\u03bc\u03bf\u03b3\u03ae Hue.",
                     "name": "\u03a3\u03ba\u03b7\u03bd\u03ae"
                 }
             },

homeassistant/components/humidifier/translations/ga.json

@@ -1,4 +1,13 @@
 {
+    "device_automation": {
+        "extra_fields": {
+            "above": "Thuas",
+            "below": "Th\u00edos",
+            "for": "Fad",
+            "humidity": "Taise",
+            "mode": "M\u00f3d"
+        }
+    },
     "exceptions": {
         "humidity_out_of_range": {
             "message": "N\u00edl an taise a chuirtear ar f\u00e1il {humidity} bail\u00ed. Is \u00e9 {min_humidity} go {max_humidity} an raon glactha."

homeassistant/components/husqvarna_automower/translations/ga.json

@@ -16,6 +16,9 @@
     },
     "entity": {
         "button": {
+            "confirm_error": {
+                "name": "Deimhnigh an earr\u00e1id"
+            },
             "sync_clock": {
                 "name": "Clog sioncr\u00f3naithe"
             }
@@ -52,6 +55,9 @@
                 "name": "Aga f\u00f3naimh"
             },
             "work_area": {
+                "state": {
+                    "no_work_area_active": "Gan aon limist\u00e9ar oibre gn\u00edomhach"
+                },
                 "state_attributes": {
                     "work_area_id_assignment": {
                         "name": "Sannadh aitheantais limist\u00e9ar oibre"
@@ -72,6 +78,9 @@
         }
     },
     "exceptions": {
+        "command_send_failed": {
+            "message": "Theip ar ord\u00fa a sheoladh: {exception}"
+        },
         "work_area_not_existing": {
             "message": "N\u00edl an limist\u00e9ar oibre roghnaithe ann."
         },
@@ -79,10 +88,36 @@
             "message": "N\u00ed thaca\u00edonn an meais\u00edn gearrtha seo le limist\u00e9ir oibre."
         }
     },
+    "selector": {
+        "override_modes": {
+            "options": {
+                "mow": "Bain",
+                "park": "P\u00e1irc"
+            }
+        }
+    },
     "services": {
+        "override_schedule": {
+            "description": "Ligeann s\u00e9 don lomaire f\u00e9ar a ghearradh n\u00f3 p\u00e1irce\u00e1il ar feadh tr\u00e9imhse \u00e1irithe, ag s\u00e1r\u00fa gach sceideal.",
+            "fields": {
+                "duration": {
+                    "description": "\u00cdosmh\u00e9id: 1 n\u00f3im\u00e9ad, uasmh\u00e9id: 42 l\u00e1, d\u00e9anfar neamhaird ar shoicind\u00ed.",
+                    "name": "Fad"
+                },
+                "override_mode": {
+                    "description": "Leis an ngn\u00edomh ba ch\u00f3ir an sceideal a sh\u00e1r\u00fa.",
+                    "name": "M\u00f3d s\u00e1raithe"
+                }
+            },
+            "name": "Sceideal s\u00e1raithe"
+        },
         "override_schedule_work_area": {
             "description": "Ligeann s\u00e9 don ghearrth\u00f3ir f\u00e9ir a bhaint ar feadh tr\u00e9imhse \u00e1irithe i limist\u00e9ar oibre sonraithe, ag s\u00e1r\u00fa gach sceideal.",
             "fields": {
+                "duration": {
+                    "description": "\u00cdosmh\u00e9id: 1 n\u00f3im\u00e9ad, uasmh\u00e9id: 42 l\u00e1, d\u00e9anfar neamhaird ar shoicind\u00ed.",
+                    "name": "Fad"
+                },
                 "work_area_id": {
                     "description": "In aon limist\u00e9ar oibre ba ch\u00f3ir don ghearrth\u00f3ir f\u00e9ir a ghearradh.",
                     "name": "Aitheantas limist\u00e9ar oibre"

homeassistant/components/husqvarna_automower_ble/translations/es.json

@@ -3,7 +3,7 @@
         "abort": {
             "already_configured": "El dispositivo ya est\u00e1 configurado",
             "cannot_connect": "No se pudo conectar",
-            "no_devices_found": "Aseg\u00farate de que la cortadora de c\u00e9sped est\u00e9 en modo de emparejamiento e int\u00e9ntalo nuevamente. Puede que sean necesarios varios intentos.",
+            "no_devices_found": "Aseg\u00farate de que la cortadora de c\u00e9sped est\u00e9 en modo de emparejamiento e int\u00e9ntalo de nuevo. Puede que sean necesarios varios intentos.",
             "unknown": "Error inesperado"
         },
         "flow_title": "{name} ({address})",

homeassistant/components/hydrawise/translations/ga.json

@@ -14,6 +14,13 @@
             }
         }
     },
+    "entity": {
+        "sensor": {
+            "daily_active_water_time": {
+                "name": "Am uisce gn\u00edomhach laeth\u00fail"
+            }
+        }
+    },
     "services": {
         "resume": {
             "description": "Atosa\u00edonn s\u00e9 sceideal uisci\u00fach\u00e1in uathoibr\u00edoch crios uisci\u00fach\u00e1in.",

homeassistant/components/hyperion/translations/en-GB.json

@@ -54,6 +54,9 @@
             "all": {
                 "name": "Component all"
             },
+            "audio_capture": {
+                "name": "Component Audio capture"
+            },
             "blackbar_detection": {
                 "name": "Component blackbar detection"
             },

homeassistant/components/idasen_desk/translations/es.json

@@ -7,7 +7,7 @@
             "not_supported": "Dispositivo no compatible"
         },
         "error": {
-            "auth_failed": "No se puede autenticar con el escritorio. Esto se soluciona normalmente utilizando un proxy Bluetooth ESPHome. Consulta la documentaci\u00f3n de integraci\u00f3n para encontrar soluciones alternativas.",
+            "auth_failed": "No se puede autenticar con el escritorio. Esto se soluciona normalmente utilizando un proxy Bluetooth ESPHome. Por favor, consulta la documentaci\u00f3n de integraci\u00f3n para encontrar soluciones alternativas.",
             "cannot_connect": "No se pudo conectar. Aseg\u00farate de que el escritorio est\u00e9 en modo de emparejamiento Bluetooth. Si a\u00fan no lo has hecho, tambi\u00e9n puedes utilizar un proxy Bluetooth ESPHome, ya que proporciona una mejor conexi\u00f3n.",
             "unknown": "Error inesperado"
         },

homeassistant/components/ihc/translations/en-GB.json

@@ -54,7 +54,7 @@
             "description": "Sets an integer runtime value on the IHC controller.",
             "fields": {
                 "controller_id": {
-                    "description": "If you have multiple controller, this is the index of your controller\nstarting with 0.\n.",
+                    "description": "If you have multiple controllers, this is the index of your controller, starting with 0.",
                     "name": "Controller ID"
                 },
                 "ihc_id": {

homeassistant/components/imap/translations/es.json

@@ -10,7 +10,7 @@
             "invalid_charset": "El juego de caracteres especificado no es compatible",
             "invalid_folder": "La carpeta seleccionada no es v\u00e1lida",
             "invalid_search": "La b\u00fasqueda seleccionada no es v\u00e1lida",
-            "ssl_error": "Se produjo un error de SSL. Cambia la lista de cifrado SSL y vuelve a intentarlo."
+            "ssl_error": "Se produjo un error de SSL. Cambia la lista de cifrado SSL e int\u00e9ntalo de nuevo."
         },
         "step": {
             "reauth_confirm": {

homeassistant/components/immich/translations/en-GB.json

@@ -68,6 +68,11 @@
                 "name": "Videos count",
                 "unit_of_measurement": "videos"
             }
+        },
+        "update": {
+            "update": {
+                "name": "Version"
+            }
         }
     }
 }

homeassistant/components/incomfort/translations/ga.json

@@ -1,7 +1,18 @@
 {
     "config": {
+        "error": {
+            "auth_error": "Dinti\u00fair neamhbhail\u00ed.",
+            "no_heaters": "N\u00ed bhfuarthas aon t\u00e9itheoir\u00ed.",
+            "not_found": "N\u00edor aims\u00edodh aon gheata.",
+            "timeout_error": "Teorainn ama agus ceangal \u00e1 dh\u00e9anamh leis an ngeata.",
+            "unknown": "Earr\u00e1id anaithnid agus ceangal \u00e1 dh\u00e9anamh leis an ngeata."
+        },
         "step": {
             "dhcp_auth": {
+                "data_description": {
+                    "password": "T\u00e1 an focal faire chun log\u00e1il isteach sa gheata priont\u00e1ilte ag bun an gheata n\u00f3 is \u00e9 `intergas` \u00e9 i gc\u00e1s roinnt gl\u00e9asanna n\u00edos sine.",
+                    "username": "An t-ainm \u00fas\u00e1ideora chun log\u00e1il isteach sa gheata. Is \u00e9 seo `admin` i bhformh\u00f3r na gc\u00e1sanna."
+                },
                 "description": "Cuir isteach sonra\u00ed f\u00edordheimhnithe don gheata {host} le do thoil",
                 "title": "Socraigh geata Intergas"
             },
@@ -14,9 +25,92 @@
                     "password": "Ceartaigh an focal faire geata."
                 },
                 "description": "Athfh\u00edordheimhnigh don gheata."
+            },
+            "user": {
+                "data_description": {
+                    "host": "Ainm \u00f3stach n\u00f3 seoladh IP gheata Intergas.",
+                    "password": "T\u00e1 an focal faire chun log\u00e1il isteach sa gheata priont\u00e1ilte ag bun an gheata n\u00f3 is \u00e9 `intergas` \u00e9 i gc\u00e1s roinnt gl\u00e9asanna n\u00edos sine.",
+                    "username": "An t-ainm \u00fas\u00e1ideora chun log\u00e1il isteach sa gheata. Is \u00e9 seo `admin` i bhformh\u00f3r na gc\u00e1sanna."
+                },
+                "description": "Socraigh geata nua Intergas. Tabhair faoi deara nach nglacfaidh roinnt c\u00f3ras n\u00edos sine le dinti\u00fair le socr\u00fa. I gc\u00e1s gl\u00e9asanna n\u00edos nua\u00ed, t\u00e1 f\u00edordheimhni\u00fa ag teast\u00e1il."
             }
         }
     },
+    "entity": {
+        "binary_sensor": {
+            "fault": {
+                "name": "Locht"
+            },
+            "is_burning": {
+                "name": "D\u00f3ire"
+            },
+            "is_pumping": {
+                "name": "Caid\u00e9al"
+            },
+            "is_tapping": {
+                "name": "Sconna uisce te"
+            }
+        },
+        "sensor": {
+            "tap_temperature": {
+                "name": "Teocht an sconna"
+            }
+        },
+        "water_heater": {
+            "boiler": {
+                "state": {
+                    "boiler_ext": "Coire seachtrach",
+                    "boiler_int": "Coire inmhe\u00e1nach",
+                    "buffer": "Maol\u00e1n",
+                    "central_heating": "T\u00e9amh l\u00e1rnach",
+                    "central_heating_rf": "T\u00e9amh l\u00e1rnach RF",
+                    "cv_temperature_too_high_e1": "Teocht r\u00f3-ard",
+                    "flame_detection_fault_e6": "Locht braite lasair",
+                    "frost": "Cosaint sioc",
+                    "gas_valve_relay_faulty_e29": "Athsheolt\u00f3ir comhla g\u00e1is lochtach",
+                    "gas_valve_relay_faulty_e30": "Athsheolt\u00f3ir comhla g\u00e1is lochtach",
+                    "incorrect_fan_speed_e8": "Luas m\u00edcheart fean",
+                    "no_flame_signal_e4": "Gan comhartha lasair",
+                    "opentherm": "TeirmOscailte",
+                    "poor_flame_signal_e5": "Comhartha lasair lag",
+                    "postrun_boyler": "Coire iar-rith",
+                    "postrun_ch": "T\u00e9amh l\u00e1rnach iar-rith",
+                    "s1_and_s2_interchanged_e2": "Malarta\u00edodh S1 agus S2",
+                    "sensor_fault_after_self_check_e0": "Locht braiteora tar \u00e9is f\u00e9inseice\u00e1la",
+                    "sensor_fault_s1_e10": "Locht braiteora S1",
+                    "sensor_fault_s1_e11": "Locht braiteora S1",
+                    "sensor_fault_s1_e12": "Locht braiteora S1",
+                    "sensor_fault_s1_e13": "Locht braiteora S1",
+                    "sensor_fault_s1_e14": "Locht braiteora S1",
+                    "sensor_fault_s2_e20": "Locht braiteora S2",
+                    "sensor_fault_s2_e21": "Locht braiteora S2",
+                    "sensor_fault_s2_e22": "Locht braiteora S2",
+                    "sensor_fault_s2_e23": "Locht braiteora S2",
+                    "sensor_fault_s2_e24": "Locht braiteora S2",
+                    "sensor_test": "T\u00e1st\u00e1il braiteora",
+                    "service": "Seirbh\u00eds",
+                    "shortcut_outside_sensor_temperature_e27": "Braiteoir teochta lasmuigh gearr",
+                    "tapwater": "Uisce sconna",
+                    "tapwater_int": "Uisce sconna inmhe\u00e1nach",
+                    "unknown": "Anaithnid"
+                }
+            }
+        }
+    },
+    "exceptions": {
+        "no_heaters": {
+            "message": "N\u00ed bhfuarthas aon t\u00e9itheoir\u00ed."
+        },
+        "not_found": {
+            "message": "N\u00edor aims\u00edodh aon gheata."
+        },
+        "timeout_error": {
+            "message": "Teorainn ama agus ceangal \u00e1 dh\u00e9anamh leis an ngeata."
+        },
+        "unknown": {
+            "message": "Earr\u00e1id anaithnid agus ceangal \u00e1 dh\u00e9anamh leis an ngeata."
+        }
+    },
     "options": {
         "step": {
             "init": {

homeassistant/components/input_button/translations/de.json

@@ -1,7 +1,7 @@
 {
     "entity_component": {
         "_": {
-            "name": "Tasteneingabe",
+            "name": "Tasten-Eingabe",
             "state_attributes": {
                 "editable": {
                     "name": "Verwaltet \u00fcber UI",
@@ -23,5 +23,5 @@
             "name": "Neu laden"
         }
     },
-    "title": "Tasteneingabe"
+    "title": "Tasten-Eingabe"
 }